aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/firmware/imx (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-06-16Merge tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixesOlof Johansson1-0/+3
i.MX fixes for 5.2: - A build fix for soc-imx8 driver which needs SOC_BUS support. To avoid dealing with the dependency for every single i.MX SoC bus driver, we selects at from architecture level. - A fix on i.MX SCU firmware driver to ensure SCU irq is enabled only after IPC is ready. - A regression fix on cpuidle-imx6sx driver, which causes some characters loss on serial communication. * tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready arm64: imx: Fix build error without CONFIG_SOC_BUS Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20firmware: imx: SCU irq should ONLY be enabled after SCU IPC is readyAnson Huang1-0/+3
The imx_scu_irq_group_enable() is normally called during module driver probe phase to enable SCU group irq, if SCU IPC is NOT ready, below dump will show out: [ 0.933001] Hardware name: Freescale i.MX8QXP MEK (DT) [ 0.938129] pstate: 60000005 (nZCv daif -PAN -UAO) [ 0.942907] pc : imx_scu_call_rpc+0x114/0x158 [ 0.947251] lr : imx_scu_irq_group_enable+0x74/0xc4 [ 0.952113] sp : ffff00001005bae0 [ 0.955415] x29: ffff00001005bae0 x28: ffff0000111bb0a0 [ 0.960712] x27: ffff00001140b000 x26: ffff00001111068c [ 0.966011] x25: ffff0000111bb100 x24: 0000000000000000 [ 0.971311] x23: ffff0000113d9cd8 x22: 0000000000000001 [ 0.976610] x21: 0000000000000001 x20: ffff80083b51a410 [ 0.981909] x19: ffff000011259000 x18: 0000000000000480 [ 0.987209] x17: 000000000023ffb8 x16: 0000000000000010 [ 0.992508] x15: 000000000000023f x14: ffffffffffffffff [ 0.997807] x13: 0000000000000018 x12: 0000000000000030 [ 1.003107] x11: 0000000000000003 x10: 0101010101010101 [ 1.008406] x9 : ffffffffffffffff x8 : 7f7f7f7f7f7f7f7f [ 1.013706] x7 : fefefeff646c606d x6 : 0000000000000000 [ 1.019005] x5 : ffff0000112596c8 x4 : 0000000000000008 [ 1.024304] x3 : 0000000000000003 x2 : 0000000000000001 [ 1.029604] x1 : ffff00001005bb58 x0 : 0000000000000000 [ 1.034905] Call trace: [ 1.037341] imx_scu_call_rpc+0x114/0x158 [ 1.041334] imx_scu_irq_group_enable+0x74/0xc4 [ 1.045856] imx_sc_wdt_probe+0x24/0x150 [ 1.049766] platform_drv_probe+0x4c/0xb0 [ 1.053762] really_probe+0x1f8/0x2c8 [ 1.057407] driver_probe_device+0x58/0xfc [ 1.061490] device_driver_attach+0x68/0x70 [ 1.065660] __driver_attach+0x94/0xdc [ 1.069397] bus_for_each_dev+0x64/0xc0 [ 1.073220] driver_attach+0x20/0x28 [ 1.076782] bus_add_driver+0x148/0x1fc [ 1.080601] driver_register+0x68/0x120 [ 1.084424] __platform_driver_register+0x4c/0x54 [ 1.089120] imx_sc_wdt_driver_init+0x18/0x20 [ 1.093463] do_one_initcall+0x58/0x1b8 [ 1.097287] kernel_init_freeable+0x1cc/0x288 [ 1.101630] kernel_init+0x10/0x100 [ 1.105101] ret_from_fork+0x10/0x18 [ 1.108669] ---[ end trace 9e03302114457de9 ]--- [ 1.113296] enable irq failed, group 1, mask 1, ret -22 To avoid such scenario, return -EPROBE_DEFER in imx_scu_irq_group_enable() API if SCU IPC is NOT ready, then module driver which calls this API in probe phase will defer probe after SCU IPC ready. Fixes: 851826c7566e ("firmware: imx: enable imx scu general irq function") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11firmware: imx: enable imx scu general irq functionAnson Huang3-1/+175
The System Controller Firmware (SCFW) controls RTC, thermal and WDOG etc., these resources' interrupt function are managed by SCU. When any IRQ pending, SCU will notify Linux via MU general interrupt channel #3, and Linux kernel needs to call SCU APIs to get IRQ status and notify each module to handle the interrupt. Since there is no data transmission for SCU IRQ notification, so doorbell mode is used for this MU channel, and SCU driver will use notifier mechanism to broadcast to every module which registers the SCU block notifier. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19firmware: imx: scu-pd: decouple the SS information from domain namesAisheng Dong1-44/+48
As resource power domain service is provided by SCU firmware, no SS information required. So we can remove the SS indicator from the domain names, then the domains defined can be better shared among different SCU based platforms. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19firmware: imx: scu-pd: add specifying the base of domain name index supportAisheng Dong1-52/+55
As the domain resource id in the same type may not be continuous, so it's hard to describe all such power domains with current struct imx_sc_pd_range. Adding the optional base for domain name index to address this issue. Then we can add the discrete domains easily later. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19firmware: imx: scu-pd: use bool to set postfixAisheng Dong1-51/+51
Using bool instead 0/1 to indicate whether adding a postfix for domain names which can improve the code readability and less confusing. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-02-11firmware: imx: Add support to start/stop a CPUDaniel Baluta1-0/+38
This is done via RPC call to SCU. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-12firmware: imx: scu-pd: add fallback compatible string supportAisheng Dong1-0/+1
SCU power domain can be used in the same way by IMX8QXP and IMX8QM SoCs. Make the driver support the fallback compatible string "fsl,scu-pd" to allow other SoCs to reuse the common part. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-14firmware: imx: add SCU power domain driverA.s. Dong3-1/+347
Some i.MX SoCs contain a system controller that is responsible for controlling the state of the IPs that are present. Communication between the host processor running an OS and the system controller happens through a SCU protocol. This patch adds SCU protocol based power domains drivers. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-08firmware: imx: add misc svc supportDong Aisheng2-1/+100
Add SCU MISC SVC support which provides misc control get/set functions. Cc: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-08firmware: imx: add SCU firmware driver supportDong Aisheng3-0/+283
The System Controller Firmware (SCFW) is a low-level system function which runs on a dedicated Cortex-M core to provide power, clock, and resource management. It exists on some i.MX8 processors. e.g. i.MX8QM (QM, QP), and i.MX8QX (QXP, DX). This patch implements the SCU firmware IPC function and the common message sending API sc_call_rpc. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jassi Brar <jassisinghbrar@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.