aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/fsi (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-23net: bcmgenet: remove HFB_CTRL accessDoug Berger1-4/+0
Commit c5a54bbcecec ("net: bcmgenet: abort suspend on error") mistakenly introduced register accesses that should not occur in bcmgenet_wol_power_up_cfg(). Fixes: c5a54bbcecec ("net: bcmgenet: abort suspend on error") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22{net, IB}/mlx4: Initialize CQ buffers in the driver when possibleDaniel Jurgens5-7/+82
Perform CQ initialization in the driver when the capability is supported by the FW. When passing the CQ to HW indicate that the CQ buffer has been pre-initialized. Doing so decreases CQ creation time. Testing on P8 showed a single 2048 entry CQ creation time was reduced from ~395us to ~170us, which is 2.3x faster. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22selftests: explicitly require kernel features needed by udpgro testsPaolo Abeni1-0/+14
commit 3327a9c46352f1 ("selftests: add functionals test for UDP GRO") make use of ipv6 NAT, but such a feature is not currently implied by selftests. Since the 'ip[6]tables' commands may actually create nft rules, depending on the specific user-space version, let's pull both NF and NFT nat modules plus the needed deps. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 3327a9c46352f1 ("selftests: add functionals test for UDP GRO") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21selftests: forwarding: vxlan_bridge_1d: Add learning testIdo Schimmel1-0/+108
Add a test which checks that the VxLAN driver can learn FDB entries and that these entries are correctly deleted and aged-out. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21selftests: mlxsw: Consider VxLAN learning enabled as validIdo Schimmel1-1/+1
The test currently expects that a configuration which includes a VxLAN device with learning enabled to fail. Previous patches enabled VxLAN learning in mlxsw, so change the test accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_nve: Allow VxLAN learningIdo Schimmel1-6/+2
Up until now the driver returned an error when learning was enabled on a VxLAN device enslaved to an offloaded bridge. Previous patches added VxLAN learning support, so remove the check. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_switchdev: Allow deletion of learned FDB entriesIdo Schimmel1-1/+2
Allow users to delete learned FDB entries from the bridge's FDB before enabling VxLAN learning. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_switchdev: Process learned VxLAN FDB entriesIdo Schimmel1-14/+189
Start processing two new entry types in addition to current ones: * Learned unicast tunnel entry * Aged-out unicast tunnel entry In both cases the device reports on a new {MAC, FID, IP address} tuple that was learned / aged-out. Based on this notification, the driver instructs the device to add / delete the entry to / from its database. The driver also makes sure to notify the bridge and VxLAN drivers about the new entry. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_nve: Add API to resolve learned IP addressesIdo Schimmel2-0/+17
FDB notifications for entries learned from an NVE tunnel contain the IP address of the remote VTEP. In the case of IPv4 underlay, the IP address is specified as-is. IPv6 addresses on the other hand, are specified as handles which then need to be used to query the actual address from the device. Only IPv4 underlay is currently supported, so we cannot receive notifications for IPv6 addresses and therefore an error is returned when one tries to resolve such an address. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_fid: Allow FID lookup by its indexIdo Schimmel2-2/+42
When processing a notification about a new FDB entry learned from a VxLAN tunnel, the driver is provided with the FID index among other parameters. The driver potentially needs to update the bridge and VxLAN drivers about the new entry using a pointer to the VxLAN device and the corresponding VNI. These two parameters are stored in the FID, so add a new function that allows looking up a FID based on its index. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_fid: Store ifindex of NVE device in FIDIdo Schimmel3-3/+16
The driver periodically polls for new FDB entries learned by the device. In the case of an FDB entry learned from a VxLAN tunnel, the notification includes the IP of the remote VTEP, the filtering identifier (FID) and the source MAC address of the overlay packet. Assuming learning is enabled in the VxLAN and bridge drivers, the driver needs to generate a notification and update them about the new FDB entry. Store the ifindex of the NVE device in the FID so that the driver will be able to update the VxLAN and bridge drivers using it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: reg: Add definition of unicast tunnel record for SFN registerIdo Schimmel1-0/+64
Will be used to process learned FDB records from an NVE tunnel. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21bridge: Allow querying bridge port flagsIdo Schimmel2-0/+18
Allow querying bridge port flags so that drivers capable of performing VxLAN learning will update the bridge driver only if learning is enabled on its bridge port corresponding to the VxLAN device. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21vxlan: Allow changing ageing timeIdo Schimmel1-4/+6
In a similar fashion to the bridge device, allow changing the ageing time of the VxLAN device by scheduling its timer to fire if the ageing time changed. One use case is selftests where learning / ageing of VxLAN FDB entries is tested. The default ageing time is 5 minutes, which is too long for a simple selftest. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21vxlan: Add hardware FDB learningPetr Machata2-1/+74
In order to allow devices to signal learning events to VXLAN, introduce two new switchdev messages: SWITCHDEV_VXLAN_FDB_ADD_TO_BRIDGE and SWITCHDEV_VXLAN_FDB_DEL_TO_BRIDGE. Listen to these notifications in the vxlan driver. The FDB entries learned this way have an NTF_EXT_LEARNED flag, and only entries marked as such can be unlearned by the _DEL_ event. They are also immediately marked as offloaded. This is the same behavior that the bridge driver observes. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21vxlan: Don't override user-added entries with ext-learned onesPetr Machata1-9/+17
When an external learning event collides with an user-added entry, the user-added entry shouldn't be taken over. Otherwise on an unlearn event the entry would be completely lost, even though the user added it by hand. Therefore skip update of FDB flags and state for these cases. This is in accordance with the bridge behavior. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21vxlan: Mark user-added FDB entriesPetr Machata2-6/+12
The VXLAN driver needs to differentiate between FDB entries learned by the VXLAN driver, and those added by the user. The latter ones shouldn't be taken over by external learning events. This is in accordance with bridge behavior. Therefore, extend the flags bitfield to 16 bits and add a new private NTF flag to mark the user-added entries. This seems preferable to adding a dedicated boolean, because passing the flag, unlike passing e.g. a true, makes it clear what the meaning of the bit is. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21vxlan: vxlan_fdb_notify(): Make switchdev notification configurablePetr Machata1-30/+41
In a following patch, vxlan is extended to allow hardware FDB learning. For FDB entries learned this way, switchdev notifications should not be sent again, because the driver already knows about these entries. To that end, add an argument vxlan_fdb_notify() to determine whether the switchdev notifications should be sent. Propagate the argument to all call sites transitively, eventually passing true in all root calls. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21vxlan: __vxlan_fdb_delete(): Drop unused argument vidPetr Machata1-4/+3
This argument is necessary for vxlan_fdb_delete(), the API of which is prescribed by ndo_fdb_del, but __vxlan_fdb_delete() doesn't need it. Therefore drop it. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net: lpc_eth: fix trivial comment typoAndrea Claudi1-2/+2
Fix comment typo rxfliterctrl -> rxfilterctrl Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlx5: use skb_vlan_tag_get_prio()Michał Mirosław1-1/+1
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21benet: use skb_vlan_tag_get_prio()Michał Mirosław1-1/+1
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/hyperv: use skb_vlan_tag_*() helpersMichał Mirosław1-4/+5
Replace open-coded bitfield manipulation with skb_vlan_tag_*() helpers. This also enables correctly passing of VLAN.CFI bit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/vlan: introduce skb_vlan_tag_get_cfi() helperMichał Mirosław1-1/+2
Abstract CFI/DEI bit access consistently with other VLAN tag fields. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: rename ksz_9477_reg.h to ksz9477_reg.hTristram Ha3-2/+2
Rename ksz_9477_reg.h to ksz9477_reg.h for consistency as the product name is always KSZ####. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: break KSZ9477 DSA driver into two filesTristram Ha8-1242/+1903
Break KSZ9477 DSA driver into two files in preparation to add more KSZ switch drivers. Add common functions in ksz_common.h so that other KSZ switch drivers can access code in ksz_common.c. Add ksz_spi.h for common functions used by KSZ switch SPI drivers. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: rename ksz_spi.c to ksz9477_spi.cTristram Ha3-8/+8
Rename ksz_spi.c to ksz9477_spi.c and update Kconfig in preparation to add more KSZ switch drivers. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: rename some functions with ksz9477 prefixTristram Ha1-57/+59
Rename some functions with ksz9477 prefix to separate chip specific code from common code. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: clean up codeTristram Ha1-4/+4
Clean up code according to patch check suggestions. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: replace license with GPLTristram Ha4-54/+10
Replace license with GPL. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20ice: Fix possible NULL pointer de-referenceBruce Allan1-0/+3
A recent update to smatch is causing it to report the error "we previously assumed 'm_entry->vsi_list_info' could be null". Fix that. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Use Tx|Rx in commentsAnirudh Venkataramanan9-42/+42
In code comments, use Tx|Rx instead of tx|rx Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Cosmetic formatting changesAnirudh Venkataramanan11-84/+83
1. Fix several cases of double spacing 2. Fix typos 3. Capitalize abbreviations Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Cleanup short function signaturesBruce Allan3-8/+4
Function signatures that do not exceed 80-characters should be on a single line. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Cleanup ice_tx_timeout()Bruce Allan1-13/+9
Clean up number of formatting issues and a comment that could use clarification. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Fix return value from NAPI pollDave Ertman1-1/+2
ice_napi_poll is hard-coded to return zero when it's done. It should instead return the work done (if any work was done). The only time it should return zero is if an interrupt or poll is handled and no work is performed. So change the return value to be the minimum of work done or budget-1. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Constify global structures that can/should beBruce Allan1-2/+2
Indicate these structs should not be modified and take advantage of some compiler optimizations by making these structs const. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Do not set LAN_EN for MAC-VLAN filtersYashaswini Raghuram Prathivadi Bhayankaram1-13/+24
In the action fields for a MAC-VLAN filter, do not set the LAN_EN flag if the MAC in the MAC-VLAN is unicast MAC. The unicast packets that match should not be forwarded to the wire. Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Pass the return value of ice_init_def_sw_recp()Jaroslaw Ilgiewicz1-3/+1
Added check of return value for ice_init_def_sw_recp(). Now we know if memory was correctly allocated. Signed-off-by: Jaroslaw Ilgiewicz <jaroslaw.ilgiewicz@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Cleanup duplicate control queue codeBruce Allan1-142/+76
1. Assigning the register offset and mask values contains duplicate code that can easily be replaced with a macro. 2. Separate functions for freeing send queue and receive queue rings are not needed; replace with a single function that uses a pointer to the struct ice_ctl_q_ring structure as a parameter instead of a pointer to the struct ice_ctl_q_info structure. 3. Initializing register settings for both send queue and receive queue contains duplicate code that can easily be replaced with a helper function. 4. Separate functions for freeing send queue and receive queue buffers are not needed; duplicate code can easily be replaced with a macro. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20ice: Do autoneg based on VSI stateAkeem G Abodunrin1-5/+5
If VSI state is up, we should do autoneg with link up, otherwise with link down. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-20net-next/hinic: fix a bug in rx data flowXue Chaojing1-1/+1
In rx_alloc_pkts(), there is a loop call of tasklet, which causes 100% cpu utilization, even no packets are being received. This patch fixes this bug. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net-next/hinic:fix a bug in set mac addressXue Chaojing1-3/+4
In add_mac_addr(), if the MAC address is a muliticast address, it will not be set, which causes the network card fail to receive the multicast packet. This patch fixes this bug. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net-next/hinic:add rx checksum offload for HiNICXue Chaojing7-1/+78
In order to improve performance, this patch adds rx checksum offload for the HiNIC driver. Performance test(Iperf) shows more than 80% improvement in TCP streams. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net-next/hinic:replace multiply and division operatorsXue Chaojing2-20/+38
To improve performance, this patch uses bit operations to replace multiply and division operators. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20mlxsw: core: Extend cooling device with cooling levelsVadim Pasternak1-1/+55
Extend cooling device with cooling levels vector to allow more flexibility of PWM setting. Thermal zone algorithm operates with the numerical states for PWM setting. Each state is the index, defined in range from 0 to 10 and it's mapped to the relevant duty cycle value, which is written to PWM controller. With the current definition fan speed is set to 0% for state 0, 10% for state 1, and so on up to 100% for the maximum state 10. Some systems have limitation for the PWM speed minimum. For such systems PWM setting speed to 0% will just disable the ability to increase speed anymore and such device will be stall on zero speed. Cooling levels allow to configure state vector according to the particular system requirements. For example, if PWM speed is not allowed to be below 30%, cooling levels could be configured as 30%, 30%, 30%, 30%, 40%, 50% and so on. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20cxgb4/cxgb4vf: Fix mac_hlist initialization and freeArjun Vynipadath2-12/+13
Null pointer dereference seen when cxgb4vf driver is unloaded without bringing up any interfaces, moving mac_hlist initialization to driver probe and free the mac_hlist in remove to fix the issue. Fixes: 24357e06ba51 ("cxgb4vf: fix memleak in mac_hlist initialization") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20tcp: drop dst in tcp_add_backlog()Eric Dumazet1-0/+2
Under stress, softirq rx handler often hits a socket owned by the user, and has to queue the packet into socket backlog. When this happens, skb dst refcount is taken before we escape rcu protected region. This is done from __sk_add_backlog() calling skb_dst_force(). Consumer will have to perform the opposite costly operation. AFAIK nothing in tcp stack requests the dst after skb was stored in the backlog. If this was the case, we would have had failures already since skb_dst_force() can end up clearing skb dst anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20ipv4: Don't try to print ASCII of link level header in martian dumps.David S. Miller1-1/+1
This has no value whatsoever. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net_sched: sch_fq: avoid calling ktime_get_ns() if not neededEric Dumazet1-1/+6
There are two cases were we can avoid calling ktime_get_ns() : 1) Queue is empty. 2) Internal queue is not empty. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.