aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-pch.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-05-24gpio: pch: Include the right headerLinus Walleij1-1/+1
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21gpio: pch: use devres for irq generic chipBartosz Golaszewski1-5/+7
Use resource managed variants of irq_alloc_generic_chip() and irq_setup_generic_chip(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: pch: check the return value of irq_alloc_generic_chip()Bartosz Golaszewski1-3/+12
This function can fail, so check the return value before dereferencing the returned pointer. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: pch: use resource management for irqsBartosz Golaszewski1-10/+4
Use device resource managed variants of irq_alloc_descs() and request_irq() and remove the code manually freeing irq resources. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: pch: Optimize pch_gpio_get()Jean Delvare1-1/+1
The double negation is costly and can be avoided by shifting the register value before masking the requested bit. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: pch: use gpiochip data pointerLinus Walleij1-6/+6
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Krueger <daniel.krueger@systec-electronic.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-26gpio: pch: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Krueger <daniel.krueger@systec-electronic.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15gpio: pch: fix non-DT buildLinus Walleij1-0/+2
commit 1cfadea8f395e3fb6a15ea548e3e86c8b6d64f98 "gpio: pch: allow use from device tree" makes the driver not compile unless CONFIG_OF_GPIO is set. Fix it. Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10gpio: pch: allow use from device treePaul Burton1-0/+1
Allow GPIOs from the gpio-pch driver to be referenced from device tree by simply setting the struct gpio_chip of_node pointer to that of the struct pci_dev. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-14gpio/pch: Use irq_set_handler_locked()Thomas Gleixner1-2/+2
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle: Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org
2014-10-02gpio: pch: Build context save/restore only for PMThierry Reding1-0/+2
The pch_gpio_save_reg_conf() and pch_gpio_restore_reg_conf() functions are only used in pch_gpio_suspend() and pch_gpio_resume(), respectively. Since the latter are only built if PM is enabled, make the former build under the same conditions. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22gpio: remove all usage of gpio_remove retval in driver/gpioabdoulaye berthe1-8/+2
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27gpio: pch: add slab includeLinus Walleij1-0/+1
After change 3ff35cbcfa4bc7d7dbdd0279e32ea677567ded02 "gpio-pch: Fix Kconfig dependencies" which enabled COMPILE_TEST as an alternative for the PCH driver, we get build failures like this: drivers/gpio/gpio-pch.c: In function 'pch_gpio_probe': drivers/gpio/gpio-pch.c:359:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] drivers/gpio/gpio-pch.c:359:7: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/gpio/gpio-pch.c:442:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] Fix this by including <linux/slab.h> explicitly. Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-27pch_gpio: set value before enabling output directionDaniel Krueger1-3/+5
This ensures that the output signal does not toggle if set to high. Signed-off-by: Daniel Krueger <daniel.krueger@systec-electronic.com> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio/pinctrl: make gpio_chip members typed booleanLinus Walleij1-1/+1
This switches the two members of struct gpio_chip that were defined as unsigned foo:1 to bool, because that is indeed what they are. Switch all users in the gpio and pinctrl subsystems to assign these values with true/false instead of 0/1. The users outside these subsystems will survive since true/false is 1/0, atleast we set some kind of more strict typing example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han1-1/+1
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20gpio: Don't override the error code in probe error handlingAxel Lin1-2/+1
Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: Denis Turischev <denis@compulab.co.il> Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-11Merge tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds1-4/+4
Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-11-28gpio: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Tyser <ptyser@xes-inc.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28gpio: remove use of __devinitBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28gpio: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-04gpio-pch: Set parent dev for gpio chipAlexander Stein1-0/+1
This will show the gpio chip as a child node under /sys/bus/pci/devices/xxxx:xx:xx.x/ Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-17gpio: gpio-pch: Use spinlock for register access protectionAxel Lin1-12/+10
gpio_chip.can_sleep is 0, but current code uses mutex in pch_gpio_set pch_gpio_get and pch_gpio_direction_input functions. Thus those functions are not callable from interrupt context. This patch converts mutex into spinlock. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-24Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-11/+1
Pull GPIO driver changes from Grant Likely: "Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits) gpio/generic: initialize basic_mmio_gpio shadow variables properly gpiolib: Remove 'const' from data argument of gpiochip_find() gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 gpiolib: quiet gpiochip_add boot message noise gpio: mpc8xxx: Prevent NULL pointer deref in demux handler gpio/lpc32xx: Add device tree support gpio: Adjust of_xlate API to support multiple GPIO chips gpiolib: Implement devm_gpio_request_one() gpio-mcp23s08: dbg_show: fix pullup configuration display Add support for TCA6424A gpio/omap: (re)fix wakeups on level-triggered GPIOs gpio/omap: fix broken context restore for non-OFF mode transitions gpio/omap: fix missing check in *_runtime_suspend() gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume() gpio/omap: remove suspend/resume callbacks gpio/omap: remove retrigger variable in gpio_irq_handler gpio/omap: remove saved_wakeup field from struct gpio_bank gpio/omap: remove suspend_wakeup field from struct gpio_bank gpio/omap: remove saved_fallingdetect, saved_risingdetect gpio/omap: remove virtual_irq_start variable ... Conflicts: drivers/gpio/gpio-samsung.c
2012-05-11gpio: pch9: Use proper flow type handlersThomas Gleixner1-29/+28
Jean-Francois Dagenais reported: Configuring a gpio pin with the gpio-pch driver with "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for threaded ISR until the ISR thread actually gets to physically clear the interrupt on the triggering chip!! The immediate observable symptom is the high CPU usage for my ISR thread task and the interrupt count in /proc/interrupts incrementing radically. The driver is wrong in several ways: 1) Using handle_simple_irq() does not provide proper flow control handling. In the case of oneshot threaded handlers for the demultiplexed interrupts this results in an interrupt storm because the simple handler does not deal with masking/unmasking. Even without threaded oneshot handlers an interrupt storm for level type interrupts can easily be triggered when the interrupt is disabled and the interrupt line is activated from the device. 2) Acknowlegding the demultiplexed interrupt before calling the handler is wrong for level type interrupts. 3) The set_type function unconditionally enables the interrupt. It's supposed to set the type and nothing else. The unmasking is done by the core code. Move the acknowledge code into a separate function and add it to the demux irqchip callbacks. Remove the unconditional enabling from the set_type() callback and set the proper flow handlers depending on the selected type (level/edge). Reported-and-tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-07gpio: Convert drivers to use module_pci_driver()Axel Lin1-11/+1
This patch converts the drivers in drivers/gpio/* to use module_pci_driver() macro which makes the code smaller and a bit simpler by having less boilerplate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-01gpio: Add missing spin_lock_init in gpio-pch driverAxel Lin1-0/+1
This bug was introduced by commit d568a681 "gpio-pch: add spinlock in suspend/resume processing" which adds a spinlock to struct pch_gpio but never init the spinlock. Reported-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-16gpio-pch: cleanup __iomem annotation usageMárton Németh1-1/+1
The __iomem annotation is to be used together with pointers used as iowrite32() parameter. For more details see [1] and [2]. This patch will remove the following sparse warnings ("make C=1"): * warning: incorrect type in assignment (different address spaces) * warning: incorrect type in argument 1 (different address spaces) * warning: incorrect type in argument 2 (different address spaces) References: [1] A new I/O memory access mechanism (Sep 15, 2004) http://lwn.net/Articles/102232/ [2] Being more anal about iospace accesses (Sep 15, 2004) http://lwn.net/Articles/102240/ Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-16gpio-pch: cleanup NULL pointer checkingMárton Németh1-1/+1
This patch will remove the following sparse warning ("make C=1"): * warning: Using plain integer as NULL pointer Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-12pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA1-3/+3
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-12pch_gpio: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA1-0/+1
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31drivers/gpio: Fix drivers who are implicit users of module.hPaul Gortmaker1-0/+1
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in gpio are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-19gpio-pch: Use NUMA_NO_NODE not GFP_KERNELTomoya MORINAGA1-1/+1
Currently, GFP_KERNEL is used as parameter of irq_alloc_descs like below. irq_base = irq_alloc_descs(-1, IOH_IRQ_BASE, num_ports[j], GFP_KERNEL); This is not true. So, this patch uses NUMA_NO_NODE not GFP_KERNEL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: David Rientjes <rientjes@google.com> Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-05gpio-pch: Support interrupt functionTomoya MORINAGA1-0/+187
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-05gpio-pch: Save register value in suspend()Tomoya MORINAGA1-1/+21
Currently, when suspend is occurred, register im0/1 and gpio_use_sel are not saved. This patch modifies so that register im0/1 and gpio_use_sel are saved. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-05gpio-pch: modify gpio_nums and maskTomoya MORINAGA1-6/+25
Currently, the number of GPIO pins is set fixed value(=12). Also PIN MASK is set as '0xfff'. However the pins differs by IOH. This patch sets the value correctly. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-05gpio-pch: support ML7223 IOH n-BusTomoya MORINAGA1-0/+1
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-05gpio-pch: add spinlock in suspend/resume processingTomoya MORINAGA1-0/+10
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-05gpio-pch: Delete invalid "restore" code in suspend()Tomoya MORINAGA1-1/+0
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06gpio: reorganize driversGrant Likely1-0/+316
Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.