aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-pci-idio-16.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-03-28gpio: pci-idio-16: make use of raw_spinlock variantsJulia Cartwright1-14/+14
The pci-idio-16 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13gpio: pci-idio-16: Fix PCI BAR indexWilliam Breathitt Gray1-2/+3
The PCI BAR0 and BAR1 for the PCI-IDIO-16 hold information for the PLX 9052 bridge chip on the device. The PCI BAR2 holds the necessary base address for I/O control of the PCI-IDIO-16. This patch corrects the PCI BAR index mismatch for the PCI-IDIO-16 GPIO driver. Fixes: 02e74fc0401a ("gpio: Add GPIO support for the ACCES PCI-IDIO-16") Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13gpio: pci-idio-16: Fix PCI device ID codeWilliam Breathitt Gray1-1/+1
The ACCES PCI-IDIO-16 has a PCI device ID code of 0x0DC8. It is incorrect to use the PCI device ID code of the ACCES PCI-IIRO-8 (0x0F00). This patch fixes the said PCI device ID code mismatch. Fixes: 02e74fc0401a ("gpio: Add GPIO support for the ACCES PCI-IDIO-16") Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06gpio: Add GPIO support for the ACCES PCI-IDIO-16William Breathitt Gray1-0/+348
The ACCES PCI-IDIO-16 device provides 32 lines of digital I/O (16 lines of optically-isolated digital inputs for AC and DC control signals, and 16 lines of solid state switch digital outputs). An interrupt is generated when any of the inputs change state (low to high or high to low). Input filter control is not supported by this driver, and input filters are deactivated by this driver. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>