aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_nbio.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-03drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exitsZhenyu Wang1-3/+9
From commit f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") the vgpu idr destroy is moved later than vgpu resource destroy, then it would fail to stop timer for schedule policy clean which to check vgpu idr for any left vGPU. So this trys to destroy vgpu idr earlier. Cc: Colin Xu <colin.xu@intel.com> Fixes: f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") Acked-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200229055445.31481-1-zhenyuw@linux.intel.com
2020-02-25drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetimeTina Zhang1-1/+1
Deleting dmabuf item's list head after releasing its container can lead to KASAN-reported issue: BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0 Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119 So fix this issue by puting deleting dmabuf_objs ahead of releasing its container. Fixes: dfb6ae4e14bd6 ("drm/i915/gvt: Handle orphan dmabuf_objs") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-2-tina.zhang@intel.com
2020-02-24drm/i915/gvt: Separate display reset from ALL_ENGINES resetTina Zhang1-1/+1
ALL_ENGINES reset doesn't clobber display with the current gvt-g supported platforms. Thus ALL_ENGINES reset shouldn't reset the display engine registers emulated by gvt-g. This fixes guest warning like [ 14.622026] [drm] Initialized i915 1.6.0 20200114 for 0000:00:03.0 on minor 0 [ 14.967917] fbcon: i915drmfb (fb0) is primary device [ 25.100188] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] E RROR [CRTC:51:pipe A] flip_done timed out [ 25.100860] -----------[ cut here ]----------- [ 25.100861] pll on state mismatch (expected 0, found 1) [ 25.101024] WARNING: CPU: 1 PID: 30 at drivers/gpu/drm/i915/display/intel_dis play.c:14382 verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101025] Modules linked in: intel_rapl_msr intel_rapl_common kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel cr ypto_simd cryptd glue_helper cec rc_core video drm_kms_helper joydev drm input_l eds i2c_algo_bit serio_raw fb_sys_fops syscopyarea sysfillrect sysimgblt mac_hid qemu_fw_cfg sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 e1000 psmouse i2c_piix4 pata_acpi floppy [ 25.101052] CPU: 1 PID: 30 Comm: kworker/u4:1 Not tainted 5.5.0+ #1 [ 25.101053] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .12.1-0-ga5cab58 04/01/2014 [ 25.101055] Workqueue: events_unbound async_run_entry_fn [ 25.101092] RIP: 0010:verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101093] Code: e0 d9 ff e9 a3 fe ff ff 80 3d e9 c2 11 00 00 44 89 f6 48 c7 c7 c0 9d 88 c0 75 3b e8 eb df d9 ff e9 c7 fe ff ff e8 d1 e0 ae c4 <0f> 0b e9 7a fe ff ff 80 3d c0 c2 11 00 00 8d 71 41 89 c2 48 c7 c7 [ 25.101093] RSP: 0018:ffffb1de80107878 EFLAGS: 00010286 [ 25.101094] RAX: 0000000000000000 RBX: ffffb1de80107884 RCX: 0000000000000007 [ 25.101095] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff94fdfdd19740 [ 25.101095] RBP: ffffb1de80107938 R08: 0000000d6bfdc7b4 R09: 000000000000002b [ 25.101096] R10: ffff94fdf82dc000 R11: 0000000000000225 R12: 00000000000001f8 [ 25.101096] R13: ffff94fdb3ca6a90 R14: ffff94fdb3ca0000 R15: 0000000000000000 [ 25.101097] FS: 0000000000000000(0000) GS:ffff94fdfdd00000(0000) knlGS:00000 00000000000 [ 25.101098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.101098] CR2: 00007fbc3e2be9c8 CR3: 000000003339a003 CR4: 0000000000360ee0 [ 25.101101] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 25.101101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 25.101102] Call Trace: [ 25.101139] intel_atomic_commit_tail+0xde4/0x1520 [i915] [ 25.101141] ? flush_workqueue_prep_pwqs+0xfa/0x130 [ 25.101142] ? flush_workqueue+0x198/0x3c0 [ 25.101174] intel_atomic_commit+0x2ad/0x320 [i915] [ 25.101209] drm_atomic_commit+0x4a/0x50 [drm] [ 25.101220] drm_client_modeset_commit_atomic+0x1c4/0x200 [drm] [ 25.101231] drm_client_modeset_commit_force+0x47/0x170 [drm] [ 25.101250] drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_hel per] [ 25.101255] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] [ 25.101287] intel_fbdev_set_par+0x1a/0x40 [i915] [ 25.101289] ? con_is_visible+0x2e/0x60 [ 25.101290] fbcon_init+0x378/0x600 [ 25.101292] visual_init+0xd5/0x130 [ 25.101296] do_bind_con_driver+0x217/0x430 [ 25.101297] do_take_over_console+0x7d/0x1b0 [ 25.101298] do_fbcon_takeover+0x5c/0xb0 [ 25.101299] fbcon_fb_registered+0x199/0x1a0 [ 25.101301] register_framebuffer+0x22c/0x330 [ 25.101306] __drm_fb_helper_initial_config_and_unlock+0x31a/0x520 [drm_kms_h elper] [ 25.101311] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper] [ 25.101341] intel_fbdev_initial_config+0x18/0x30 [i915] [ 25.101342] async_run_entry_fn+0x3c/0x150 [ 25.101343] process_one_work+0x1fd/0x3f0 [ 25.101344] worker_thread+0x34/0x410 [ 25.101346] kthread+0x121/0x140 [ 25.101346] ? process_one_work+0x3f0/0x3f0 [ 25.101347] ? kthread_park+0x90/0x90 [ 25.101350] ret_from_fork+0x35/0x40 [ 25.101351] --[ end trace b5b47d44cd998ba1 ]-- Fixes: 6294b61ba769 ("drm/i915/gvt: add missing display part reset for vGPU reset") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200221023234.28635-1-tina.zhang@intel.com
2020-02-10drm/i915/gvt: more locking for ppgtt mm LRU listIgor Druzhinin1-0/+4
When the lock was introduced in commit 72aabfb862e40 ("drm/i915/gvt: Add mutual lock for ppgtt mm LRU list") one place got lost. Fixes: 72aabfb862e4 ("drm/i915/gvt: Add mutual lock for ppgtt mm LRU list") Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1580742421-25194-1-git-send-email-igor.druzhinin@citrix.com
2020-02-10drm/i915/gvt: fix high-order allocation failure on late loadIgor Druzhinin1-2/+2
If the module happens to be loaded later at runtime there is a chance memory is already fragmented enough to fail allocation of firmware blob storage and consequently GVT init. Since it doesn't seem to be necessary to have the blob contiguous, use vmalloc() instead to avoid the issue. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1579723824-25711-1-git-send-email-igor.druzhinin@citrix.com
2019-12-17drm/i915/gvt: Fix guest boot warningGao Fred1-0/+16
Simulate MIA core in reset status once GUC engine is reset. v2: 1. use vgpu_vreg_t() function, 2. clear MIA_IN_RESET after reading. (Zhenyu) v3: add comments. (Zhenyu) Signed-off-by: Gao Fred <fred.gao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191216160255.29499-1-fred.gao@intel.com
2019-12-13drm/i915/gvt: Pin vgpu dma address before usingTina Zhang4-4/+99
Dma-buf display uses the vgpu dma address saved in the guest part GGTT table which is updated by vCPU thread. In host side, when the dma address is used by qemu ui thread, gvt-g must make sure the dma address is validated before letting it go to the HW. Invalid guest dma address will easily cause DMA fault and make GPU hang. v2: Rebase Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g") Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191212141342.3417-1-tina.zhang@intel.com
2019-12-13drm/i915/gvt: set guest display buffer as readonlyZhenyu Wang1-0/+1
We shouldn't allow write for exposed guest display buffer which doesn't make sense. So explicitly set read only flag for display dmabuf allocated object. Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g") Cc: Tina Zhang <tina.zhang@intel.com> Acked-by: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191212084614.1100-1-zhenyuw@linux.intel.com
2019-12-11drm/i915/gvt: use vgpu lock for active state settingZhenyu Wang1-2/+2
Need to align with deactivate, should only use vgpu's lock for active state setting instead of gvt lock. Fixes: f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") Cc: Colin Xu <colin.xu@intel.com> Reviewed-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191202070109.73924-2-zhenyuw@linux.intel.com
2019-12-10drm/i915/gt: Detect if we miss WaIdleLiteRestoreChris Wilson1-25/+21
In order to avoid confusing the HW, we must never submit an empty ring during lite-restore, that is we should always advance the RING_TAIL before submitting to stay ahead of the RING_HEAD. Normally this is prevented by keeping a couple of spare NOPs in the request->wa_tail so that on resubmission we can advance the tail. This relies on the request only being resubmitted once, which is the normal condition as it is seen once for ELSP[1] and then later in ELSP[0]. On preemption, the requests are unwound and the tail reset back to the normal end point (as we know the request is incomplete and therefore its RING_HEAD is even earlier). However, if this w/a should fail we would try and resubmit the request with the RING_TAIL already set to the location of this request's wa_tail potentially causing a GPU hang. We can spot when we do try and incorrectly resubmit without advancing the RING_TAIL and spare any embarrassment by forcing the context restore. In the case of preempt-to-busy, we leave the requests running on the HW while we unwind. As the ring is still live, we cannot rewind our rq->tail without forcing a reload so leave it set to rq->wa_tail and only force a reload if we resubmit after a lite-restore. (Normally, the forced reload will be a part of the preemption event.) Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Closes: https://gitlab.freedesktop.org/drm/intel/issues/673 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@kernel.vger.org Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk (cherry picked from commit 82c69bf58650e644c61aa2bf5100b63a1070fd2f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-10drm/i915/hdcp: Nuke intel_hdcp_transcoder_config()Ville Syrjälä5-28/+14
intel_hdcp_transcoder_config() is clobbering some globally visible state in .compute_config(). That is a big no no as .compute_config() is supposed to have no visible side effects when either the commit fails or it's just a TEST_ONLY commit. Inline this stuff into intel_hdcp_enable() so that the state only gets modified when we actually commit the state to the hardware. Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Fixes: 39e2df090c3c ("drm/i915/hdcp: update current transcoder into intel_hdcp") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-2-ville.syrjala@linux.intel.com Reviewed-by: Ramalingam C <ramalingam.c@intel.com> (cherry picked from commit 67e1d5ed85a83e232a9e0b995f5778a86722b96e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-10drm/i915/fbc: Disable fbc by default on all glk+Ville Syrjälä1-1/+1
We're missing a workaround in the fbc code for all glk+ platforms which can cause corruption around the top of the screen. So enabling fbc by default is a bad idea. I'm not keen to backport the w/a so let's start by disabling fbc by default on all glk+. We'll lift the restriction once the w/a is in place. Cc: stable@vger.kernel.org Cc: Daniel Drake <drake@endlessm.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jian-Hong Pan <jian-hong@endlessm.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit cd8c021b36a66833cefe2c90a79a9e312a2a5690) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-10drm/i915/perf: Configure OAR for specific contextUmesh Nerlige Ramappa1-87/+112
Gen12 supports saving/restoring render counters per context. Apply OAR configuration only for the context that is passed in to perf. v2: - Fix OACTXCONTROL value to only stop/resume counters. - Remove gen12_update_reg_state_unlocked as power state is already applied by the caller. v3: (Lionel) - Move register initialization into the array - Assume a valid oa_config in enable_metric_set Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL") Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit ccdeed497042676e13fc1625e2a341880eff5da5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-10drm/i915/perf: Allow non-privileged access when OA buffer is not sampledUmesh Nerlige Ramappa1-2/+3
SAMPLE_OA_REPORT enables sampling of OA reports from the OA buffer. Since reports from OA buffer had system wide visibility, collecting samples from the OA buffer was a privileged operation on previous platforms. Prior to TGL, it was also necessary to sample the OA buffer to normalize reports from MI REPORT PERF COUNT. TGL has a dedicated OAR unit to sample perf reports for a specific render context. This removes the necessity to sample OA buffer. - If not sampling the OA buffer, allow non-privileged access. An earlier patch allows the non-privilege access: https://patchwork.freedesktop.org/patch/337716/?series=68582&rev=1 - Clear up the path for non-privileged access in this patch Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL") Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 322d56aa3145a28445907ecc638a2c3aa3295c6b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-09drm/i915/gt: Save irqstate around virtual_context_destroyChris Wilson1-2/+3
As virtual_context_destroy() may be called from a request signal, it may be called from inside an irq-off section, and so we need to do a full save/restore of the irq state rather than blindly re-enable irqs upon unlocking. <4> [110.024262] WARNING: inconsistent lock state <4> [110.024277] 5.4.0-rc8-CI-CI_DRM_7489+ #1 Tainted: G U <4> [110.024292] -------------------------------- <4> [110.024305] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4> [110.024323] kworker/0:0/5 [HC0[0]:SC0[0]:HE1:SE1] takes: <4> [110.024338] ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.024592] {IN-HARDIRQ-W} state was registered at: <4> [110.024612] lock_acquire+0xa7/0x1c0 <4> [110.024627] _raw_spin_lock_irqsave+0x33/0x50 <4> [110.024788] intel_engine_breadcrumbs_irq+0x38c/0x600 [i915] <4> [110.024808] irq_work_run_list+0x49/0x70 <4> [110.024824] irq_work_run+0x26/0x50 <4> [110.024839] smp_irq_work_interrupt+0x44/0x1e0 <4> [110.024855] irq_work_interrupt+0xf/0x20 <4> [110.024871] __do_softirq+0xb7/0x47f <4> [110.024885] irq_exit+0xba/0xc0 <4> [110.024898] do_IRQ+0x83/0x160 <4> [110.024910] ret_from_intr+0x0/0x1d <4> [110.024922] irq event stamp: 172864 <4> [110.024938] hardirqs last enabled at (172863): [<ffffffff819ea214>] _raw_spin_unlock_irq+0x24/0x50 <4> [110.024963] hardirqs last disabled at (172864): [<ffffffff819e9fba>] _raw_spin_lock_irq+0xa/0x40 <4> [110.024988] softirqs last enabled at (172812): [<ffffffff81c00385>] __do_softirq+0x385/0x47f <4> [110.025012] softirqs last disabled at (172797): [<ffffffff810b829a>] irq_exit+0xba/0xc0 <4> [110.025031] other info that might help us debug this: <4> [110.025049] Possible unsafe locking scenario: <4> [110.025065] CPU0 <4> [110.025075] ---- <4> [110.025084] lock(&(&rq->lock)->rlock); <4> [110.025099] <Interrupt> <4> [110.025109] lock(&(&rq->lock)->rlock); <4> [110.025124] *** DEADLOCK *** <4> [110.025144] 4 locks held by kworker/0:0/5: <4> [110.025156] #0: ffff88827588f528 ((wq_completion)events){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025187] #1: ffffc9000006fe78 ((work_completion)(&engine->retire_work)){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025219] #2: ffff88825605e270 (&kernel#2){+.+.}, at: engine_retire+0x57/0xe0 [i915] <4> [110.025405] #3: ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.025634] stack backtrace: <4> [110.025653] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G U 5.4.0-rc8-CI-CI_DRM_7489+ #1 <4> [110.025675] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017 <4> [110.025856] Workqueue: events engine_retire [i915] <4> [110.025872] Call Trace: <4> [110.025891] dump_stack+0x71/0x9b <4> [110.025907] mark_lock+0x49a/0x500 <4> [110.025926] ? print_shortest_lock_dependencies+0x200/0x200 <4> [110.025946] mark_held_locks+0x49/0x70 <4> [110.025962] ? _raw_spin_unlock_irq+0x24/0x50 <4> [110.025978] lockdep_hardirqs_on+0xa2/0x1c0 <4> [110.025995] _raw_spin_unlock_irq+0x24/0x50 <4> [110.026171] virtual_context_destroy+0xc5/0x2e0 [i915] <4> [110.026376] __active_retire+0xb4/0x290 [i915] <4> [110.026396] dma_fence_signal_locked+0x9e/0x1b0 <4> [110.026613] i915_request_retire+0x451/0x930 [i915] <4> [110.026766] retire_requests+0x4d/0x60 [i915] <4> [110.026919] engine_retire+0x63/0xe0 [i915] Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex") Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205145934.663183-1-chris@chris-wilson.co.uk (cherry picked from commit 6f7ac8285371fb0df58aba861eaab387f79ed04d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-08Linux 5.5-rc1Linus Torvalds1-2/+2
2019-12-07smb3: improve check for when we send the security descriptor context on createSteve French1-0/+2
We had cases in the previous patch where we were sending the security descriptor context on SMB3 open (file create) in cases when we hadn't mounted with with "modefromsid" mount option. Add check for that mount flag before calling ad_sd_context in open init. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-12-07r8169: fix rtl_hw_jumbo_disable for RTL8168evlHeiner Kallweit1-1/+1
In referenced fix we removed the RTL8168e-specific jumbo config for RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in rtl_hw_jumbo_disable(). v2: fix referenced commit id Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07pipe: don't use 'pipe_wait() for basic pipe IOLinus Torvalds1-3/+27
pipe_wait() may be simple, but since it relies on the pipe lock, it means that we have to do the wakeup while holding the lock. That's unfortunate, because the very first thing the waked entity will want to do is to get the pipe lock for itself. So get rid of the pipe_wait() usage by simply releasing the pipe lock, doing the wakeup (if required) and then using wait_event_interruptible() to wait on the right condition instead. wait_event_interruptible() handles races on its own by comparing the wakeup condition before and after adding itself to the wait queue, so you can use an optimistic unlocked condition for it. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07NTB: Add Hygon Device IDJiasen Lin1-0/+1
Signed-off-by: Jiasen Lin <linjiasen@hygon.cn> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-12-07pipe: remove 'waiting_writers' merging logicLinus Torvalds3-33/+9
This code is ancient, and goes back to when we only had a single page for the pipe buffers. The exact history is hidden in the mists of time (ie "before git", and in fact predates the BK repository too). At that long-ago point in time, it actually helped to try to merge big back-and-forth pipe reads and writes, and not limit pipe reads to the single pipe buffer in length just because that was all we had at a time. However, since then we've expanded the pipe buffers to multiple pages, and this logic really doesn't seem to make sense. And a lot of it is somewhat questionable (ie "hmm, the user asked for a non-blocking read, but we see that there's a writer pending, so let's wait anyway to get the extra data that the writer will have"). But more importantly, it makes the "go to sleep" logic much less obvious, and considering the wakeup issues we've had, I want to make for less of those kinds of things. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07pipe: fix and clarify pipe read wakeup logicLinus Torvalds1-13/+18
This is the read side version of the previous commit: it simplifies the logic to only wake up waiting writers when necessary, and makes sure to use a synchronous wakeup. This time not so much for GNU make jobserver reasons (that pipe never fills up), but simply to get the writer going quickly again. A bit less verbose commentary this time, if only because I assume that the write side commentary isn't going to be ignored if you touch this code. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07pipe: fix and clarify pipe write wakeup logicLinus Torvalds1-18/+41
The pipe rework ends up having been extra painful, partly becaused of actual bugs with ordering and caching of the pipe state, but also because of subtle performance issues. In particular, the pipe rework caused the kernel build to inexplicably slow down. The reason turns out to be that the GNU make jobserver (which limits the parallelism of the build) uses a pipe to implement a "token" system: a parallel submake will read a character from the pipe to get the job token before starting a new job, and will write a character back to the pipe when it is done. The overall job limit is thus easily controlled by just writing the appropriate number of initial token characters into the pipe. But to work well, that really means that the old behavior of write wakeups being synchronous (WF_SYNC) is very important - when the pipe writer wakes up a reader, we want the reader to actually get scheduled immediately. Otherwise you lose the parallelism of the build. The pipe rework lost that synchronous wakeup on write, and we had clearly all forgotten the reasons and rules for it. This rewrites the pipe write wakeup logic to do the required Wsync wakeups, but also clarifies the logic and avoids extraneous wakeups. It also ends up addign a number of comments about what oit does and why, so that we hopefully don't end up forgetting about this next time we change this code. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()Eric Dumazet1-1/+7
Use the new tcf_proto_check_kind() helper to make sure user provided value is well formed. BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:606 [inline] BUG: KMSAN: uninit-value in string+0x4be/0x600 lib/vsprintf.c:668 CPU: 0 PID: 12358 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245 string_nocheck lib/vsprintf.c:606 [inline] string+0x4be/0x600 lib/vsprintf.c:668 vsnprintf+0x218f/0x3210 lib/vsprintf.c:2510 __request_module+0x2b1/0x11c0 kernel/kmod.c:143 tcf_proto_lookup_ops+0x171/0x700 net/sched/cls_api.c:139 tc_chain_tmplt_add net/sched/cls_api.c:2730 [inline] tc_ctl_chain+0x1904/0x38a0 net/sched/cls_api.c:2850 rtnetlink_rcv_msg+0x115a/0x1580 net/core/rtnetlink.c:5224 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5242 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x110f/0x1330 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] ___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311 __sys_sendmsg net/socket.c:2356 [inline] __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2363 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45a649 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f0790795c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000045a649 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000006 RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f07907966d4 R13: 00000000004c8db5 R14: 00000000004df630 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x306/0xa10 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x783/0x1330 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] ___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311 __sys_sendmsg net/socket.c:2356 [inline] __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2363 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 6f96c3c6904c ("net_sched: fix backward compatibility for TCA_KIND") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07r8169: add missing RX enabling for WoL on RTL8125Heiner Kallweit1-1/+1
RTL8125 also requires to enable RX for WoL. v2: add missing Fixes tag Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07vhost/vsock: accept only packets with the right dst_cidStefano Garzarella1-1/+3
When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07net: phy: dp83867: fix hfs boot in rgmii modeGrygorii Strashko1-48/+71
The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is used in "rgmii-id" mode - the networking stops working. Unfortunately, it's not enough to just move DT parsing code to .probe() as it depends on phydev->interface value, which is set to correct value abter the .probe() is completed and before calling .config_init(). So, RGMII configuration can't be loaded from DT. To fix and issue - move RGMII validation code to .config_init() - parse RGMII parameters in dp83867_of_init(), but consider them as optional. Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07net: ethernet: ti: cpsw: fix extra rx interruptGrygorii Strashko1-1/+1
Now RX interrupt is triggered twice every time, because in cpsw_rx_interrupt() it is asked first and then disabled. So there will be pending interrupt always, when RX interrupt is enabled again in NAPI handler. Fix it by first disabling IRQ and then do ask. Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07inet: protect against too small mtu values.Eric Dumazet5-11/+20
syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07gre: refetch erspan header from skb->data after pskb_may_pull()Cong Wang1-1/+1
After pskb_may_pull() we should always refetch the header pointers from the skb->data in case it got reallocated. In gre_parse_header(), the erspan header is still fetched from the 'options' pointer which is fetched before pskb_may_pull(). Found this during code review of a KMSAN bug report. Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup") Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: William Tu <u9012063@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07pppoe: remove redundant BUG_ON() check in pppoe_pernetAditya Pakki1-2/+0
Passing NULL to pppoe_pernet causes a crash via BUG_ON. Dereferencing net in net_generici() also has the same effect. This patch removes the redundant BUG_ON check on the same parameter. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07lib/: fix Kconfig indentationKrzysztof Kozlowski3-22/+22
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ / /' -i */Kconfig Link: http://lkml.kernel.org/r/20191120140140.19148-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments'Changbin Du1-12/+12
DEBUG_FS does not belong to 'Compile-time checks and compiler options'. Link: http://lkml.kernel.org/r/20190909144453.3520-10-changbin.du@gmail.com Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options'Changbin Du1-9/+9
I think DEBUG_BUGVERBOSE is a dmesg option which gives more debug info to dmesg. Link: http://lkml.kernel.org/r/20190909144453.3520-9-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: create a submenu for scheduler debugging optionsChangbin Du1-0/+4
Create a submenu 'Scheduler Debugging' for scheduler debugging options. Link: http://lkml.kernel.org/r/20190909144453.3520-8-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGEChangbin Du1-12/+12
They are both memory debug options to debug kernel stack issues. Link: http://lkml.kernel.org/r/20190909144453.3520-7-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move Oops into 'Lockups and Hangs'Changbin Du1-29/+29
They are similar options so place them together. Link: http://lkml.kernel.org/r/20190909144453.3520-6-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move kernel testing and coverage options to same submenuChangbin Du1-84/+89
Move error injection, coverage, testing options to a new top level submenu 'Kernel Testing and Coverage'. They are all for test purpose. Link: http://lkml.kernel.org/r/20190909144453.3520-5-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: group kernel data structures debugging togetherChangbin Du1-10/+14
Group these similar runtime data structures verification options together. Link: http://lkml.kernel.org/r/20190909144453.3520-4-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: create submenu for arch special debugging optionsChangbin Du1-0/+4
The arch special options are a little long, so create a submenu for them. Link: http://lkml.kernel.org/r/20190909144453.3520-3-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'Changbin Du1-4/+8
Patch series "hacking: make 'kernel hacking' menu better structurized", v3. This series is a trivial improvment for the layout of 'kernel hacking' configuration menu. Now we have many items in it which makes takes a little time to look up them since they are not well structurized yet. Early discussion is here: https://lkml.org/lkml/2019/9/1/39 This patch (of 9): Group generic kernel debugging instruments sysrq/kgdb/ubsan together into a new submenu. Link: http://lkml.kernel.org/r/20190909144453.3520-2-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07pipe: fix poll/select race introduced by the pipe reworkLinus Torvalds1-3/+15
The kernel wait queues have a basic rule to them: you add yourself to the wait-queue first, and then you check the things that you're going to wait on. That avoids the races with the event you're waiting for. The same goes for poll/select logic: the "poll_wait()" goes first, and then you check the things you're polling for. Of course, if you use locking, the ordering doesn't matter since the lock will serialize with anything that changes the state you're looking at. That's not the case here, though. So move the poll_wait() first in pipe_poll(), before you start looking at the pipe state. Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length") Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07nfsd: depend on CRYPTO_MD5 for legacy client trackingPatrick Steinhardt1-0/+1
The legacy client tracking infrastructure of nfsd makes use of MD5 to derive a client's recovery directory name. As the nfsd module doesn't declare any dependency on CRYPTO_MD5, though, it may fail to allocate the hash if the kernel was compiled without it. As a result, generation of client recovery directories will fail with the following error: NFSD: unable to generate recoverydir name The explicit dependency on CRYPTO_MD5 was removed as redundant back in 6aaa67b5f3b9 (NFSD: Remove redundant "select" clauses in fs/Kconfig 2008-02-11) as it was already implicitly selected via RPCSEC_GSS_KRB5. This broke when RPCSEC_GSS_KRB5 was made optional for NFSv4 in commit df486a25900f (NFS: Fix the selection of security flavours in Kconfig) at a later point. Fix the issue by adding back an explicit dependency on CRYPTO_MD5. Fixes: df486a25900f (NFS: Fix the selection of security flavours in Kconfig) Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-12-07NFSD fixing possible null pointer derefering in copy offloadOlga Kornievskaia1-1/+2
Static checker revealed possible error path leading to possible NULL pointer dereferencing. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: e0639dc5805a: ("NFSD introduce async copy feature") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-12-06tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()Guillaume Nault1-3/+3
Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the timestamp of the last synflood. Protect them with READ_ONCE() and WRITE_ONCE() since reads and writes aren't serialised. Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was introduced by a0f82f64e269 ("syncookies: remove last_synq_overflow from struct tcp_sock"). But unprotected accesses were already there when timestamp was stored in .last_synq_overflow. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tcp: tighten acceptance of ACKs not matching a child socketGuillaume Nault1-3/+13
When no synflood occurs, the synflood timestamp isn't updated. Therefore it can be so old that time_after32() can consider it to be in the future. That's a problem for tcp_synq_no_recent_overflow() as it may report that a recent overflow occurred while, in fact, it's just that jiffies has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31. Spurious detection of recent overflows lead to extra syncookie verification in cookie_v[46]_check(). At that point, the verification should fail and the packet dropped. But we should have dropped the packet earlier as we didn't even send a syncookie. Let's refine tcp_synq_no_recent_overflow() to report a recent overflow only if jiffies is within the [last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This way, no spurious recent overflow is reported when jiffies wraps and 'last_overflow' becomes in the future from the point of view of time_after32(). However, if jiffies wraps and enters the [last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with 'last_overflow' being a stale synflood timestamp), then tcp_synq_no_recent_overflow() still erroneously reports an overflow. In such cases, we have to rely on syncookie verification to drop the packet. We unfortunately have no way to differentiate between a fresh and a stale syncookie timestamp. In practice, using last_overflow as lower bound is problematic. If the synflood timestamp is concurrently updated between the time we read jiffies and the moment we store the timestamp in 'last_overflow', then 'now' becomes smaller than 'last_overflow' and tcp_synq_no_recent_overflow() returns true, potentially dropping a valid syncookie. Reading jiffies after loading the timestamp could fix the problem, but that'd require a memory barrier. Let's just accommodate for potential timestamp growth instead and extend the interval using 'last_overflow - HZ' as lower bound. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tcp: fix rejected syncookies due to stale timestampsGuillaume Nault2-2/+16
If no synflood happens for a long enough period of time, then the synflood timestamp isn't refreshed and jiffies can advance so much that time_after32() can't accurately compare them any more. Therefore, we can end up in a situation where time_after32(now, last_overflow + HZ) returns false, just because these two values are too far apart. In that case, the synflood timestamp isn't updated as it should be, which can trick tcp_synq_no_recent_overflow() into rejecting valid syncookies. For example, let's consider the following scenario on a system with HZ=1000: * The synflood timestamp is 0, either because that's the timestamp of the last synflood or, more commonly, because we're working with a freshly created socket. * We receive a new SYN, which triggers synflood protection. Let's say that this happens when jiffies == 2147484649 (that is, 'synflood timestamp' + HZ + 2^31 + 1). * Then tcp_synq_overflow() doesn't update the synflood timestamp, because time_after32(2147484649, 1000) returns false. With: - 2147484649: the value of jiffies, aka. 'now'. - 1000: the value of 'last_overflow' + HZ. * A bit later, we receive the ACK completing the 3WHS. But cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow() says that we're not under synflood. That's because time_after32(2147484649, 120000) returns false. With: - 2147484649: the value of jiffies, aka. 'now'. - 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID. Of course, in reality jiffies would have increased a bit, but this condition will last for the next 119 seconds, which is far enough to accommodate for jiffie's growth. Fix this by updating the overflow timestamp whenever jiffies isn't within the [last_overflow, last_overflow + HZ] range. That shouldn't have any performance impact since the update still happens at most once per second. Now we're guaranteed to have fresh timestamps while under synflood, so tcp_synq_no_recent_overflow() can safely use it with time_after32() in such situations. Stale timestamps can still make tcp_synq_no_recent_overflow() return the wrong verdict when not under synflood. This will be handled in the next patch. For 64 bits architectures, the problem was introduced with the conversion of ->tw_ts_recent_stamp to 32 bits integer by commit cca9bab1b72c ("tcp: use monotonic timestamps for PAWS"). The problem has always been there on 32 bits architectures. Fixes: cca9bab1b72c ("tcp: use monotonic timestamps for PAWS") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06lpc_eth: kernel BUG on removeBruno Carneiro da Cunha1-2/+0
We may have found a bug in the nxp/lpc_eth.c driver. The function platform_set_drvdata() is called twice, the second time it is called, in lpc_mii_init(), it overwrites the struct net_device which should be at pdev->dev->driver_data with pldat->mii_bus. When trying to remove the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will return the pldat->mii_bus pointer and try to use it as a struct net_device pointer. This causes unregister_netdev to segfault and generate a kernel BUG. Is this reproducible? Signed-off-by: Daniel Martinez <linux@danielsmartinez.com> Signed-off-by: Bruno Carneiro da Cunha <brunocarneirodacunha@usp.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tcp: md5: fix potential overestimation of TCP option spaceEric Dumazet1-2/+3
Back in 2008, Adam Langley fixed the corner case of packets for flows having all of the following options : MD5 TS SACK Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block can be cooked from the remaining 8 bytes. tcp_established_options() correctly sets opts->num_sack_blocks to zero, but returns 36 instead of 32. This means TCP cooks packets with 4 extra bytes at the end of options, containing unitialized bytes. Fixes: 33ad798c924b ("tcp: options clean up") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: sched: allow indirect blocks to bind to clsact in TCJohn Hurley1-19/+33
When a device is bound to a clsact qdisc, bind events are triggered to registered drivers for both ingress and egress. However, if a driver registers to such a device using the indirect block routines then it is assumed that it is only interested in ingress offload and so only replays ingress bind/unbind messages. The NFP driver supports the offload of some egress filters when registering to a block with qdisc of type clsact. However, on unregister, if the block is still active, it will not receive an unbind egress notification which can prevent proper cleanup of other registered callbacks. Modify the indirect block callback command in TC to send messages of ingress and/or egress bind depending on the qdisc in use. NFP currently supports egress offload for TC flower offload so the changes are only added to TC. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.