aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/core/dc_link.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-23drm/amd/display: fix audio endpoint not getting disabled issueSu Sung Chung1-2/+2
[Why] Disable_audio_stream gets enum option as a paramenter which will decide if we free acquired resources or not. However checks for the option is guarded by the other condition which check if audio stream is getting diabled more than once. With both conditions combined, if we attempt to disable audio stream twice in a row, first with keep and second with free as an option, we will never free any resources, which will make system think there is audio endpoint connected even after we plug out the device [How] Get rid of option as parameter to disable_audio_stream and move the part of the code that free acquired resources to outside where to keep or to free resources is actually determined Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-21drm/amd/display: remove duplicated include from dc_link.cYueHaibing1-4/+0
Remove duplicated include. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-21drm/amd/display: Fix 32-bit divide error in wait_for_alt_modeNathan Chancellor1-2/+2
When building arm32 allyesconfig: ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by dc_link.c >>> gpu/drm/amd/display/dc/core/dc_link.o:(wait_for_alt_mode) in archive drivers/built-in.a >>> referenced by dc_link.c >>> gpu/drm/amd/display/dc/core/dc_link.o:(wait_for_alt_mode) in archive drivers/built-in.a time_taken_in_ns is of type unsigned long long so we need to use div_u64 to avoid this error. Fixes: b5b1f4554904 ("drm/amd/display: Enable type C hotplug") Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: check hpd before retry verify link capWenjing Liu1-21/+6
[why] During detection link training if a display is disconnected, the current code will retry 3 times of link training on disconnected link before giving up. [how] Before each retry check for HPD status, only retry verify link cap when HPD is still high. Also put a 10ms delay between each retry to improve the chance of success. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Enable type C hotplugEric Yang1-0/+59
[Why and How] We want to change where timing is done for alt mode. Some of the commented out #ifs are needed for DCN20 so we enable them for that case. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Set DSC before DIG front-end is connected to its back-endNikola Cornij1-7/+13
[why] At the time DIG FE is connected to its BE, the clocks in OTG are enabled and PHY will also be set up. When DSC has to be used to fit the stream into the available bandwidth, without DSC being set DIG could get exposed to the higer bandwidth it (or link) could handle. This causes the HW to "reject" video enable setup (the register shows that video enable was attempted, but the status bit shows it as disabled). [how] - Separate DSC setup into DSC register config and DSC PPS SDP setup - Move most of the DSC setup (register config) to before dcn10_link_encoder_connect_dig_be_to_fe() is called - Set up DSC PPS SDP after DIG FE is connected to its BE. This is because setting DSC PPS SDP before that has no effect. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: enabling seamless boot sequence for dcn2Martin Leung1-1/+12
[Why] Seamless boot (building SW state inheriting BIOS-initialized timing) was enabled on DCN2, including fixes [How] Includes fixes for MPC, DPPCLK, and DIG FE mapping/OTG source select/ Pixel clock. This is part 2 of 2 for seamless boot NV10 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Synchronous DisplayPort Link TrainingDavid Galiffi1-52/+1
[WHY] We require a method to perform synchronous link training. [HOW] Sync LT is broken into 3 basic steps. "Begin" starts the state machine, and resets "preferred" link settings. "Attempt" will attempt to train the link with a given set of training parameters. "End" stops the state machine, and will optionally disable the link phy. Between "Begin" and "End" DPCD:600h must not be set to "2" (D3:Powered Down). Between "Begin" and "End", there may be multiple "Attempts" with different training parameters. Signed-off-by: David Galiffi <david.galiffi@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: do not read link setting if edp not connectedEric Yang1-7/+1
[Why] Previously assume eDP sink present if connector present. Do not need to enforce this restriction. Fix issue where driver attempt to read link setting even though no edp connected. {How] Only read link setting after reading connection status. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: drop ASSERT() if eDP panel is not connectedZhan Liu1-2/+0
[Why] For boards that support eDP but do not have a physical eDP display connected an ASSERT will be thrown. This is not a critical failure and shouldn't be treated as such. [How] Drop the assertion. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Set FEC_READY always before link trainingNikola Cornij1-9/+5
[why] Right now we FEC_READY is set only before the final link training, i.e. at mode set time. This means FEC_READY won't be set when doing link training as a response to HPD. It also fails UCD400 FEC test in DP compliance. [how] Move FEC_READY setup to link training. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Use helper for determining HDMI signalEric Bernstein1-1/+1
Use helper to determine if HDMI signal when processing avmute. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Remove unnecessary NULL check in set_preferred_link_settingsHarry Wentland1-5/+4
[Why] link_stream is never NULL here as we've dereferenced it a couple lines before and have done so for a couple months now. [How] - Drop the NULL check. - Initialize where we know link_stream is non-NULL Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: fix DMCU hang when going into Modern StandbyZi Yu Liao1-1/+8
[why] When the system is going into suspend, set_backlight gets called after the eDP got blanked. Since smooth brightness is enabled, the driver will make a call into the DMCU to ramp the brightness. The DMCU would try to enable ABM to do so. But since the display is blanked, this ends up causing ABM1_ACE_DBUF_REG_UPDATE_PENDING to get stuck at 1, which results in a dead lock in the DMCU firmware. [how] Disable brightness ramping when the eDP display is blanked. Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Read max down spreadDerek Lai1-0/+7
[Why] When launch D10.2, driver will write DPCD 0x107 with 0x00 [How] Read MAX_DOWNSPREAD (0x0003h) then keep in current link settings Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: add hdmi2.1 dsc pps packet programmingDmytro Laktyushkin1-7/+7
This change adds EMP packet programming for enabling dsc with hdmi. The packets are structured according to VESA HDMI 2.1x r2 spec, section 10.10.2.2. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: skip retrain in dc_link_set_preferred_link_settings() if using passive dongleSamson Tam1-1/+3
[Why] Fixes issue when we have a display connected using a passive dongle and then emulate over it using a DP connection at 1 x 1.62 Ghz. System hangs because register bus returns back 0xFFFFFFFF for all register reads after setting register DIG_BE_CNTL in dcn10_link_encoder_connect_dig_be_to_fe(). Hang occurs later when trying to do a register read. [How] At the start of the emulation, dc_link_set_preferred_link_settings() and dp_retrain_link_dp_test() is called, even though it is connected using a passive dongle. Add an extra condition in dp_retrain_link_dp_test() to check for link->dongle_max_pix_clk > 0. This is the only way we know if the connection is using passive dongle so we don't retrain DP. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Add ability to set preferred link training parameters.David Galiffi1-4/+42
[WHY] To add support for OS requirement to set preferred link training parameters. [HOW] Create new structure of dp link training overrides. During link training processes, these values should be used instead of the default training parameters. Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-08drm/amd/display: avoid 64-bit divisionArnd Bergmann1-2/+2
On 32-bit architectures, dividing a 64-bit integer in the kernel leads to a link error: ERROR: "__udivdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: "__divdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! Change the two recently introduced instances to a multiply+shift operation that is also much cheaper on 32-bit architectures. We can do that here, since both of them are really 32-bit numbers that change a few percent. Fixes: bedbbe6af4be ("drm/amd/display: Move link functions from dc to dc_link") Fixes: f18bc4e53ad6 ("drm/amd/display: update calculated bounding box logic for NV") Acked-by: Slava Abramov <slava.abramov@amd.com> Tested-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amdgpu/display: switch udelay to msleepAlex Deucher1-1/+1
We may need to sleep for up to 80ms (8ms per each of up to 10 loop iterations): /* First DPCD read after VDD ON can fail if the particular board * does not have HPD pin wired correctly. So if DPCD read fails, * which it should never happen, retry a few times. Target worst * case scenario of 80 ms. */ Switch udelay to msleep to avoid limits on arm. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25Merge branch 'drm-next' into drm-next-5.3Alex Deucher1-0/+2
Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: decouple dsc adjustment out of enablementWenjing Liu1-1/+1
[why] dsc adjustment is allowed via stream update sequence. dsc enablement is only allowed via commit stream sequence. with the current unified dsc set function, it is hard to determine which sequence it is called by. The solution is to decouple dsc adjustment out of enablement sequence so we can handle them separately. [how] decouple dsc adjustment out of enablement. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Implement DSC MST fair share algorithmWenjing Liu1-1/+1
[why] The current policy will always enable DSC to 12 bpp regardless of if the current bandwidth is enough for MST displays. This logic is not optimal because user will get lower quality output if DSC compression is enabled. This change to is to implement a DSC MST bandwidth fair share algorithm so we will dynamically decide if DSC is needed and what quality (target bpp) is needed to fairly destribute the MST bandwidth in one MST topology. This will allow user to see the most optimal image quality with the given bandwidth. [how] We will start with lowest bandwidth possible and run a Max-Min fairness algorithm to fairly distribute the available bandwidth. If there is still remaining bandwidth, we will try to fit the timing without DSC compression. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Calculate link bandwidth in a common functionNikola Cornij1-5/+0
[why] Currently link bandwidth is calculated in various places using the same multi-step formula. Doing this in one common place makes sure the same formula will indeed be applied to all link bandwidth calculations. It also makes it possible to apply link-setting-specific adjustments that affect effective link bandwidth. [how] Replace all implementations of link bandwidth calculation with a call to a function. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Move link functions from dc to dc_linkChris Park1-0/+27
[Why] link-specific functions should reside in dc_link.c [How] Move them there. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Add DSC support for Navi (v2)Harry Wentland1-0/+51
Add support for DCN2 DSC (Display Stream Compression) HW Blocks: +--------++------+ +----------+ | HUBBUB || HUBP | <-- | MMHUBBUB | +--------++------+ +----------+ | ^ v | +--------+ +--------+ | DPP | | DWB | +--------+ +--------+ | v ^ +--------+ | | MPC | | +--------+ | | | v | +-------+ +-------+ | | OPP | <--> | DSC | | +-------+ +-------+ | | | v | +--------+ / | OPTC | -------------- +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ v2: rebase (Alex) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/display: Add DC core changes for DCN2Harry Wentland1-1/+5
Core DC changes for DCN2. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-14Merge tag 'drm-misc-next-2019-06-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDaniel Vetter1-0/+2
drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
2019-06-11drm/amd/display: set link->dongle_max_pix_clk to 0 on a disconnectSamson Tam1-0/+6
[Why] Found issue in EDID Emulation where if we connect a display using a passive HDMI-DP dongle, disconnect it and then try to emulate a display using DP, we could not see 4K modes. This was because on a disconnect, dongle_max_pix_clk was still set so when we emulate using DP, in dc_link_validate_mode_timing(), it would think we were still using a dongle and limit the modes we support. [How] In dc_link_detect(), set dongle_max_pix_clk to 0 when we detect a hotplug out ( if new_connection_type = dc_connection_none ). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-11drm/amd/display: Remove superflous error messageJordan Lazare1-1/+1
[Why] VBios sometimes reports incorrect object type as encoder instead of connector [How] Change error message to debug message Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-11drm/amd/display: Clean up scdc_test_data structChris Park1-1/+0
These are no longer needed, Also added RESERVED bits. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-11drm/amd/display: fix issue with eDP not detected on driver loadAnthony Koo1-10/+32
[Why] HPD not going to be high if Panel VDD is off And all AUX transaction will fail :( [How] 1. Power on VDD before attempting detection if it isn't already on 2. Improve the robustness by having a retry mechanism on the first DPCD read after VDD on. If a particular board always holds HPD high incorrectly, the AUX access may fail, so we can retry in those scenarios. This change would only improve logic since it prevents AUX failure leading to bad resolution on internal panel. 3. We should never need to re-detect internal panel, so logic is re-arranged a bit to skip earlier. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-10drm/amd: drop use of drmP.h in atom.hSam Ravnborg1-0/+2
Drop use of the deprecated drmP.h header from atom.h Fix fallout in various files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-6-sam@ravnborg.org
2019-05-31drm/amd/display: Move link functions from dc to dc_linkChris Park1-1/+126
[Why] link-specific functions should reside in dc_link.c [How] Move them there. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: make clk mgr soc specificEric Yang1-0/+1
[Why] First step of refactoring clk mgr to better handle different ways of handling clock operations. Clock operation policies are soc specific and not just DCN vesion specific. It is not a hw resource, should not be in the resource pool. [How] Change clock manager creation to be based on HW internal ID, rename clock manager members to be more clear. Move clock manager out of resource. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Rename EDID_BLOCK_SIZE to DC_EDID_BLOCK_SIZEJoshua Aberback1-3/+3
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: enabling stream after HPD low to high happenedCharlene Liu1-0/+3
[Why] 1. No real HPD plug in/out but HPD happens, the driver notifies OS connection changed. 2. No display in target. When HPD goes low to high, the driver should regard as HPD and enter setmode flow. [How] In this case, even stream didn't change but still retrain. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: reset retimer/redriver below 340MhzCharlene Liu1-4/+24
[Description] This is for HDMI 6Ghz mode before we load the driver, because VBIOS not support HDMI (6Ghz mode) Reset to redriver/retimer setting for the setting for below 340Mhz. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-03Merge branch 'drm-next-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-nextDave Airlie1-16/+55
- SR-IOV fixes - Raven flickering fix - Misc spelling fixes - Vega20 power fixes - Freesync improvements - DC fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190502193020.3562-1-alexander.deucher@amd.com
2019-04-23drm/amd/display: Fix eDP Black screen after S4 resumeAnthony Koo1-16/+55
[Why] Power down of PHY on eDP requires us to call eDP power control to power on again [How] 1. In the case link rates don't match, disable PHY requires calling of eDP power control ON after 2. Link disable case limit to eDP path since this is not really applicable to DP since we do power down PHY as part of verify link cap 3. Move detection of eDP link settings to be done even for S4 resume cases where other dpcd cap read and edid read can be skipped Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-15BackMerge v5.1-rc5 into drm-nextDave Airlie1-0/+6
Need rc5 for udl fix to add udl cleanups on top. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-10drm/amd/display: disable link before changing link settingsAnthony Koo1-0/+9
[Why] If link is already enabled at a different rate (for example 5.4 Gbps) then calling VBIOS command table to switch to a new rate (for example 2.7 Gbps) will not take effect. This can lead to link training failure to occur. [How] If the requested link rate is different than the current link rate, the link must be disabled in order to re-enable at the new link rate. In today's logic it is currently only impacting eDP since DP connection types will always disable the link during display detection, when initial link verification occurs. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-10drm/amd/display: Calculate link bandwidth in a common functionNikola Cornij1-9/+7
[why] Currently link bandwidth is calculated in two places, using the same formula. They should be unified into calling one function. [how] Replace all implementations of link bandwidth calculation with a call to a function. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-10drm/amd/display: fix clk_mgr namingDmytro Laktyushkin1-1/+1
clk_mgr is called dccg in dc_state, this change fixes that Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-10drm/amd/display: use proper formula to calculate bandwidth from timingWenjing Liu1-1/+47
[why] The existing calculation uses a wrong formula to calculate bandwidth from timing. [how] Expose the existing proper function that calculates the bandwidth, so dc_link can use it to calculate timing bandwidth correctly. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-10drm/amd/display: fix dp_hdmi_max_pixel_clk unitsSivapiriyanKumarasamy1-1/+1
[Why] We are incorrectly using dp_hdmi_max_pixel_clk because the units are not clear. [How] Rename to dp_hdmi_max_pixel_clk_in_khz, and change mode timing validation to use the value correctly. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: use dc_is_virtual instead of ENUMEric Bernstein1-4/+3
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: Pass SDP spliting in parametersNikola Cornij1-1/+2
pass SDP splitting when setting stream attributes for future use Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: Handle branch device with DFP count = 0 case.Hugo Hu1-3/+2
[Why] When you have a SST branch device the driver, Even no sink device connected, it also send HPD with a valid EDID. Driver will config it to DP sink. Therefore, there're two displays in display setting. DPCD 0x05, DFP_PRESENT = 1 (branch device), DFP_TYPE = 00 (Display Port) [How] Driver determine DPCD 0x05 DFP_PRESENT = 1(branch) as an active dongle And check DFP count. Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Hugo Hu <Hugo.Hu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: VBIOS can't be light up HDMI when restart systemPaul Hsieh1-0/+6
[Why] VBIOS will not post pixel rate > 340MHz. If driver set pixel rate > 340MHz and do restart bottom, VBIOS can't post HDMI monitor due to monitor is stay in HDMI2.0 state. [How] Program Scrambling_Enable and TMDS_Bit_Clock_Ratio when disable stream. Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.