aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-11drm/amd/display: DCN2.x Do not program DPPCLK if same valueSung Lee1-1/+1
[WHY] Programming DPPCLK to the same value currently set may cause underflow while playing video in certain conditions. [HOW] Only program DPPCLK if clock is not the same as the previous value programmed. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Don't map ATOM_ENABLE to ATOM_INITNicholas Kazlauskas1-4/+0
[Why] In DCN hardware sequencer we do actually call ATOM_INIT correctly per pipe. The workaround is not necessary for command table offloading. [How] Drop the workaround since it's not needed. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11amdgpu: Prevent build errors regarding soft/hard-float FP ABI tagsDaniel Kolesa1-0/+6
On PowerPC, the compiler will tag object files with whether they use hard or soft float FP ABI and whether they use 64 or 128-bit long double ABI. On systems with 64-bit long double ABI, a tag will get emitted whenever a double is used, as on those systems a long double is the same as a double. This will prevent linkage as other files are being compiled with hard-float. On ppc64, this code will never actually get used for the time being, as the only currently existing hardware using it are the Renoir APUs. Therefore, until this is testable and can be fixed properly, at least make sure the build will not fail. Signed-off-by: Daniel Kolesa <daniel@octaforge.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Add initialitions for PLL2 clock sourceIsabel Zhang1-0/+6
[Why] Starting from 14nm, the PLL is built into the PHY and the PLL is mapped to PHY on 1 to 1 basis. In the code, the DP port is mapped to a PLL that was not initialized. This causes DP to HDMI dongle to not light up the display. [How] Initializations added for PLL2 when creating resources. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Limit minimum DPPCLK to 100MHz.Yongqiang Sun1-0/+6
[Why] Underflow is observed when plug in a 4K@60 monitor with 1366x768 eDP due to DPPCLK is too low. [How] Limit minimum DPPCLK to 100MHz. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Check engine is not NULL before acquiringAric Cyr1-1/+1
[Why] Engine can be NULL in some cases, so we must not acquire it. [How] Check for NULL engine before acquiring. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Use dcfclk to populate watermark rangesSung Lee1-7/+7
[WHY & HOW] Previously drain clk was unconstrained and fill clk was constrained on fclk. We want to change it to fill clk unconstrained and drain clock constrained to dcfclk. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Do not set optimized_require to false after plane disableSung Lee1-1/+0
[WHY] The optimized_require flag is needed to set watermarks and clocks lower in certain conditions. This flag is set to true and then set to false while programming front end in dcn20. [HOW] Do not set the flag to false while disabling plane. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-04drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2)Alex Deucher1-11/+23
We might get different numbers of clocks from powerplay depending on what the OEM has populated. v2: add assert for at least one level Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-04drm/amd/display: Only enable cursor on pipes that need itNicholas Kazlauskas1-0/+30
[Why] In current code we're essentially drawing the cursor on every pipe that contains it. This only works when the planes have the same scaling for src to dest rect, otherwise we'll get "double cursor" where one cursor is incorrectly filtered and offset from the real position. [How] Without dedicated cursor planes on DCN we require at least one pipe that matches the scaling of the current timing. This is an optimization and workaround for the most common case where the top-most plane is not scaled but the bottom-most plane is scaled. Whenever a pipe has a parent pipe in the blending tree whose recout fully contains the current pipe we can disable the pipe. This only applies when the pipe is actually visible of course. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-27drm/amd/display: fix for-loop with incorrectly sized loop counter (v2)Colin Ian King1-4/+4
A for-loop is iterating from 0 up to 1000 however the loop variable count is a u8 and hence not large enough. Fix this by making count an int. Also remove the redundant initialization of count since this is never used and add { } on the loop statement make the loop block clearer. v2: drop useless else (Walter Harms) Addresses-Coverity: ("Operands don't affect result") Fixes: ed581a0ace44 ("drm/amd/display: wait for update when setting dpg test pattern") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-27drm/amd/display: do not allocate display_mode_lib unnecessarilyDor Askayo1-8/+9
This allocation isn't required and can fail when resuming from suspend. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1009 Signed-off-by: Dor Askayo <dor.askayo@gmail.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-27Revert "drm/amd/display: Don't skip link training for empty dongle"Harry Wentland1-8/+2
This reverts commit 80adaebd2d411b7d6872a097634848a71eb13d20. [WHY] This change was working around a regression that occured in this: commit 0301ccbaf67d ("drm/amd/display: DP Compliance 400.1.1 failure") With the fix to run verify_link_cap when the SINK_COUNT of dongles becomes non-zero this change is no longer needed. Cc: Louis Li <Ching-shih.Li@amd.com> Cc: Wenjing Liu <Wenjing.Liu@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-27drm/amd/display: Retrain dongles when SINK_COUNT becomes non-zeroHarry Wentland1-2/+1
[WHY] Two years ago the patch referenced by the Fixes tag stopped running dp_verify_link_cap_with_retries during DP detection when the reason for the detection was a short-pulse interrupt. This effectively meant that we were no longer doing the verify_link_cap training on active dongles when their SINK_COUNT changed from 0 to 1. A year ago this was partly remedied with: commit 80adaebd2d41 ("drm/amd/display: Don't skip link training for empty dongle") This made sure that we trained the dongle on initial hotplug (without connected downstream devices). This is all fine and dandy if it weren't for the fact that there are some dongles on the market that don't like link training when SINK_COUNT is 0 These dongles will in fact indicate a SINK_COUNT of 0 immediately after hotplug, even when a downstream device is connected, and then trigger a shortpulse interrupt indicating a SINK_COUNT change to 1. In order to play nicely we will need our policy to not link train an active DP dongle when SINK_COUNT is 0 but ensure we train it when the SINK_COUNT changes to 1. [HOW] Call dp_verify_link_cap_with_retries on detection even when the detection is triggered from a short pulse interrupt. With this change we can also revert this commit which we'll do in a separate follow-up change: commit 80adaebd2d41 ("drm/amd/display: Don't skip link training for empty dongle") Fixes: 0301ccbaf67d ("drm/amd/display: DP Compliance 400.1.1 failure") Suggested-by: Louis Li <Ching-shih.Li@amd.com> Tested-by: Louis Li <Ching-shih.Li@amd.com> Cc: Wenjing Liu <Wenjing.Liu@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: use odm combine for YCbCr420 timing with h_active greater than 4096Wenjing Liu3-22/+45
[why] FMT has limitation to support YCbCr420 with h_active greater than 4096. [how] Use odm combine to overcome the limitation. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: init hw i2c speedLewis Huang2-9/+1
[Why] Driver didn't init hw i2c speed cause hdcp hw cannot send command, because the default value of speed register is 0x2. [How] Restore the default speed when release i2c engine Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: changed max_downscale_src_width to 4096.Isabel Zhang1-1/+1
[Why] MPO isn't enabled on some 4k videos due to video source width is 4096 and the current limit is 3840. [How] Changed the limit to 4096. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: support VSC SDP update on video test pattern requestWenjing Liu1-8/+3
[why] MSA will be deprecated in the future. Need to support VSC during DP test automation. [how] Do not disable VSC during DP test automation. TODO - need to add VSC update on DM side on test request. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Call ATOM_INIT instead of ATOM_ENABLE for DMCUBNicholas Kazlauskas1-0/+4
[Why] DMCUB command table doesn't support ATOM_ENABLE/ATOM_DISABLE anymore so we never end up calling the DCN init path in DMCUB. [How] Map ATOM_ENABLE to ATOM_INIT only for DMCUB command table offloading. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: fix rotation_angle to use enum valuesBrandon Syu1-6/+6
[Why] Hardcoded fixed values are not proper. [How] Use enum values instead of fixed numbers. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: 3.2.69Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Refine i2c frequency calculating sequenceLewis Huang1-49/+19
[Why] In HG mode, vbios didn't call DispController_Init to program NV1x XTAL_REF_DIV value when ASIC_INIT, but driver read XTAL_REF_DIV to calculate i2c reference frequency. it cause i2c frequency change from 100kHz to 200kHz. [How] remove get_speed function and calculate reference frequency at set_speed functiton. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Fix DML dummyinteger types mismatchJerry (Fangzhi) Zuo1-2/+2
[Why] The types for dummyinteger1 and dummyinteger2 are unsigned as part of the DML spec. They should not be long. [How] Make them unsigned int instead of long. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: check pipe_ctx is split pipe or notPaul Hsieh1-2/+15
[Why] Driver use pipe_ctx to reallocate payload may cause allocate payload twice on same sink with split pipe. [How] Drvier must to check pipe_ctx is split pipe or not to avoid reallocate payload twice on same sink. Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Fallback to DMCUB when command table is missingNicholas Kazlauskas1-4/+70
[Why] If the command table isn't available then we can fallback to DMCUB offloading if it's enabled and available. [How] Instead of assigning NULL for supported command table functions we can fallback to the DMCUB when it's available. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Add debug option to disable DSC supportWenjing Liu2-1/+3
[how] Empty dsc enc caps when debug option is set to disable DSC. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Do not send training pattern if VS DifferentSung Lee1-1/+1
[Why] The DP 1.4a Spec requires that training pattern only under certain specific conditions. Currently driver will re-send training pattern every time voltage swing value changes, but that should not be the case. [How] Do not re-send training pattern every time VS values are different. Only send it on the first iteration. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: update MSA and VSC SDP on video test pattern requestWenjing Liu1-1/+36
[why] On video test pattern request we need to update MSA and VSC so it will match the requested test pattern dynamic range field. [how] Update dynamic range field in MSA and disable VSC as updating VSC info packet is complicated and not required for test pattern purpose. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: skip opp blank or unblank if test pattern enabledWenjing Liu1-0/+3
[why] DPG is used to generate both blank and test automation test pattern. When test automation is running the requested test pattern can be overriden by the blank or unblank call because it is using the same hardware. [how] When test pattern is requested, skip blank or unblank. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: 3.2.68Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: reallocate MST payload when link lossPaul Hsieh3-5/+36
[Why] Try to allocate MST payload but receive HPD short pulse with link loss casue driver allocate payload twice. It cause monitor can't light up successfully. [How] When driver receive HPD short pulse with link loss, we need to deallocate payload then allocate payload. Then we will not allocate payload twice with same sink. Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: fixup DML dependenciesJun Lei3-2/+2
[why] Need to fix DML portability issues to enable SW unit testing around DML [how] Move calcs into dc include folder since multiple components reference it Remove relative paths to external dependencies Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Use mdelay to avoid context switchMartin Tsai1-2/+2
[why] The rapid msleep operation causes the white line garbage when DAL check flip pending status in SetVidPnSourceVisibility. To execute this msleep will induce context switch, and longer delay could cause worse garbage situation. [how] To replace msleep with mdelay. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Only program surface flip for video plane via dmcubYongqiang Sun2-62/+88
Only need to do surface flip for video plane via dmcub. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Enable double buffer for OTG_BLANKAlvin Lee1-1/+7
[Why] Currently if seamless boot is enabled, we will skip double buffer enable for OTG_BLANK. However, we need the double buffer enable in order to block global sync signals when OTG becomes blanked (for PSR). Blocking global sync signals prevent pipe from requesting data. [How] Move tg_init before seamless boot check. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Add monitor patch for AUO dpcd issueLewis Huang4-0/+74
[Why] dpcd cap mismatch in 2200 vs base [How] Add monitor patch which using based caps to overwrite 2200 Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: wait for test pattern after when all pipes are programmedWenjing Liu1-6/+0
[why] Currently we wait for test pattern after each pipe is programmed. For ODM combined scenario it will cause test pattern is shown on only half screen for 1 frame. This is not desirable. [how] No wait between odm pipe programming, only wait after all pipes are programmed. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: make PSR static screen entry within 30 msAnthony Koo17-55/+90
[Why] With different refresh rate panels, the PSR entry/exit time is different since it is dependent on 2 frame entry time today [How] Make static screen num frame entry time to be calculated such that entry time is within 30 ms instead of fixed num frames. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: 3.2.67Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: remove psr state condition when psr exit caseLewis Huang1-3/+0
[Why] DMCU need to wait a vblank to handle psr enter command. When psr exit coming before vblank, the psr exit command will be skip because current psr state is disable. [How] remove psr state condition when psr exit case Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Add default switch case for DCCChris Park2-0/+6
Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Use SMU ClockTable Values for DML CalculationsSung Lee1-0/+4
[Why] DML Initialization was previously done on dcn21_resource initialization. This meant that DML soc struct was populated with hardcoded values. [How] Move DML initialization to after updating bounding box, to use clock table values from SMU. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: rename _lvp to l_vpCharlene Liu4-7/+7
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Add w/a to reset PHY before link training in verify_link_capGeorge Shen3-1/+13
[Why] PHY will sometimes be in bad state on hotplugging display from USB-C dongle. [How] Add additional calls to disable and then enable PHY before link training starts during verify_link_cap. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Refactor surface flip programmingYongqiang Sun1-206/+118
Rework surface programming for RN to separate preparing parameters and register programming. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Indirect reg read macro with shift and maskNoah Abradjian8-37/+86
[Why] Recent double buffering changes for dcn2 use IX_REG_READ. However, this macro returns the full register value, with the need to manually shift and mask it to retrieve field data. [How] Create new IX_REG_GET macro that handles shift and mask. Use this for double buffering reads instead of IX_REG_READ. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: programing surface flip by dmcub.Yongqiang Sun2-0/+117
Programming surface flip addresses via dmcub uC for optimizing the data flush. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Double buffer dcn2 Gamut RemapNoah Abradjian3-6/+109
[Why] When rapidly adjusting color temperature, screen tearing was observed. This was due to overwritten values in gamut remap registers. This issue was solved for OCSC and ICSC by alternating between "A" and "B" registers to double buffer the writes. [How] Create new set_gamut_remap and program_gamut_remap for dcn20. Alternate which registers are written to by switching modes each time. Also fixes ICSC mode reg read to use proper data offset. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Driverside changes to support PSR in DMCUBWyatt Wood5-6/+289
[Why] Moving PSR from DMCU to DMCUB. [How] Add driverside PSR changes required to send inbox messages to fw. These changes are non-functional until the psr structure allocation is uncommented. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Fix double buffering in dcn2 ICSCNoah Abradjian9-42/+160
[Why] When rapidly adjusting video brightness, screen tearing was observed. This was due to overwritten values in ICSC registers. In dcn10, this issue had been fixed by implementing double buffering via alternating ICSC modes. However, the second register set used in dcn1 doesn't exist in dcn2. [How] Create new program_input_csc for dcn20. Use ICSC_B registers instead of COMA registers as second set. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.