aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)AuthorFilesLines
2017-12-06drm/amd/display: Add transfer function to dc_surface_updateSivapiriyanKumarasamy1-0/+2
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: send display_count msg so SMU can enter S0i2Hersen Wu5-2/+23
SMU can future lower voltages in long idle case when all display is off. If all display output is turned off via DPMS, send display_count = 0 after all output are turned off. otherwise send display_count msg before turning on display to make sure SMU exit S0i2 state. before is not neccessary as we are out of S0i2 when driver execute code, but send message before anyways for correctness. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Modified front end initiail in init_hwYongqiang Sun5-17/+74
Optimized front end initial sequence, reset MPC module properly. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: add warning on long reg_waitDmytro Laktyushkin1-1/+6
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: remove unnecessary waits in dcn10Dmytro Laktyushkin3-32/+3
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: fix uninitialized variable warningDmytro Laktyushkin1-1/+1
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: fix regamma programmingDmytro Laktyushkin4-25/+6
When new coefficients match cached we would skip setting regamma mode Also, when doing a stream update we would program regamma for all pipes, even thos that are not yet powered on. This resulted in never setting regamma since we would cache before the pipe is powered. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Fix some more color indentationsHarry Wentland3-54/+32
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Bunch of indentation cleanups in color stuffHarry Wentland2-112/+68
Trying to align with kernel coding style and make it a bit more readable. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Refactor disable front end pipes.Yongqiang Sun5-138/+154
There are different code to disable front end, it is difficult to debug and adding new process. This refactor makes all disable front end call the same functions. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: dal 3.1.14Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: renaming dpp function to follow naming conventionYue Hin Lau3-42/+43
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Yuehin Lau <Yuehin.Lau@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: dal 3.1.13Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: call set csc_default if enable adjustment is falseYue Hin Lau4-6/+6
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Add OPP DPG blank functionEric Bernstein3-62/+51
Added a function to blank data using OPP DPG. Clean up code to prepare for pseudocode review with HW. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: dal 3.1.12Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: cache pwl params and scl_data to avoid extra programmingDmytro Laktyushkin5-38/+30
This saves us about 5000 reg writes per full update. This translates to about 40000 writes over the course of single eDP bootup. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Don't use dc_link in link_encoderAndrew Jiang10-55/+57
dc_link is at a higher level than link_encoder, and we only want higher-level components to be able to access lower-level ones, not the other way around. Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Both timing_sync and multisync need stream_count > 1Harry Wentland1-1/+2
Previous code threw a warning about misleading indentation Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Add tg_init interface.Yongqiang Sun4-1/+15
Clear OPTC underflow status when init_hw. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Enalbe blank data double buffer after mpc disconnected.Yongqiang Sun2-5/+16
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: get remote dpcd caps for timing validationEric Yang4-3/+30
Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Only update dchub if hubbub is availableYue Hin Lau1-1/+2
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Call ipp_program_bias_and_scale only if availableEric Bernstein2-9/+10
Also move some register definitions to common DCN regs. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: dal 3.1.11Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: hubbub function flipping true and falseYue Hin Lau2-3/+3
no logic change Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Do post_update_surfaces on new stateCharlene Liu1-4/+4
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: function renaming for hubbubYue Hin Lau3-37/+43
following the naming convention with correct prefix Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: create new function prototype update_dchub for dcnYue Hin Lau2-2/+6
dcn version of update_dchub now uses hubbub instead of hwseq Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Multi display synchronization logicMikita Lipski10-64/+402
This feature synchronizes multiple displays with various timings to a display with the highest refresh rate it is enabled if edid caps flag multi_display_sync is set to one There are limitations on refresh rates allowed that can be synchronized. That would prevent from underflow and other potential corruptions. Multi display synchronization is using the same functions as timing_sync in order to minimize redunduncy and decision to disable synchronization is based on trigger parametre set in DM Feature is developed for DCN1 and DCE11 Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.10Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: correct DP is always in full range or bt609Charlene Liu1-8/+17
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: fix bug from last commit for hubbubYue Hin Lau1-1/+7
fix memory leak Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Move hdr_metadata from plane to streamAnthony Koo8-60/+65
Need to move HDR Metadata from Surface to Stream since there is only one infoframe possible per stream. Also cleaning up some duplicate definitions. Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Apply VQ adjustments in MPO caseSivapiriyanKumarasamy11-38/+211
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: create new structure for hubbubYue Hin Lau5-65/+269
instantiating new structure hubbub in resource.c Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.09Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Added disconnect dchub.Yongqiang Sun3-0/+15
Add disable ttu interface to dcn10, when remove mpc, disable ttu as well. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.08Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Not reset front end when program back end.Yongqiang Sun2-77/+2
Since front end is programmed before back end programming, no need to reset front end in back end programming. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Power down front end in init_hw.Yongqiang Sun1-85/+87
front end is initialized during init_hw, but not power gated. There are some left over valuse and will cause some diags test failed. Power gated all front end pipes will make sure every test has same starting point. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Reject PPLib clock values if they are invalidAndrew Jiang1-22/+44
We should be sticking with the default clock values if the values obtained from PPLib are bogus. Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: create new files for hubbub functionsYue Hin Lau5-475/+578
moving hubbub functions to new file Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: DMCU FW loading from PSPAnthony Koo4-7/+202
Update the programming sequence to allow DMCU firmware to be loaded by PSP. This code detects whether the firmware is loaded and does a check to verify the expected interface version and checks for correct response from micro controller. Added registry key method to allow force loading of firmware from kernel mode driver for test purposes. This is old method of firmware loading without PSP. Moved some init sequences into dc/dmcu. Changed loading sequence to initialize IRAM after firmware completely loaded. Firmware will now disable features that use IRAM until initialized. Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Set cursor position as per address.Yongqiang Sun1-3/+4
In case of pipe split, cursor position should also be programmed as per cursor address. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: cleaning up hubp for dcnYue Hin Lau3-190/+191
removing duplicate functions, renaming struct mi_regs, etc. Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Cleanup some fail labels in dcn10_resourceHarry Wentland1-24/+13
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Adding DCN1 registersMikita Lipski1-3/+30
Registers added to definition list that are required for multi display synchronization Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Check cursor address before program.Yongqiang Sun1-1/+2
Program cursor attributes during set mode is only needed in case of pipe slipt, bottom pipe should be programmed same as top pipe. Need to program if address is 0. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Move lock to front end program.Yongqiang Sun3-52/+29
Moved lock and unlock to apply_ctx_to_surface, since all the front end programming is within apply_ctx_to_surface. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.