aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-04-09drm/amd/display: add mod hdcp interface for supporting encryption state queryWenjing Liu1-2/+2
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: correct some hdcp variable namingWenjing Liu1-1/+1
[why] In HDCP update stream config interface, some variables are named as xxx_supported, but in fact the variable indicates whether or not xxx_enabled. Correct the naming so it is less confusing to read the code. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/display: Add CP_IRQ clear capabilityHarmanprit Tatla1-0/+1
[Why] Currently we do not clear the CP_IRQ bit upon receiving it. [How] Added a function to clear CP_IRQ bit. Signed-off-by: Harmanprit Tatla <harmanprit.tatla@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-09drm/amd/display: Remove hdcp display state with mst fixIsabel Zhang1-22/+6
[Why] Due to previous code changes, displays transition from active to active and added state immediately, making it redundant to have both display states. Previous change to fix this caused HDCP to get into a bad state when monitor is connected to MST hub, this change fixes that issue. [How] Change code behavior so when a device is added successfully the state remains as active and when addition is unsuccessful change state to inactive. This removes need for added and active state. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amd/display: remove mod_hdcp_hdcp2_get_link_encryption_status()Bhawanpreet Lakha1-2/+0
It is not being used, so remove it Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Revert change to HDCP display statesIsabel Zhang1-6/+22
[Why] Change is causing a regression where the OPC app no longer functions properly. [How] Revert the changelist causing the issue. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-19drm/amd/display: Remove redundant hdcp display stateIsabel Zhang1-22/+6
[Why] Due to previous code changes displays which are in active state immediately transition to the active and added state. This makes the two states redundant and unnecessary. [How] Instead of updating the device state to active and added after successful addition, change state to inactive if addition failed. Also, change references to active and added state to just added state. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-09drm/amd/display: determine is mst hdcp based on stream instead of sink signalWenjing Liu1-3/+3
[why] It is possible even if sink signal is MST but driver enables SST stream. We should not determine if we should do MST authentication based on sink's capability. Instead we should determine whether to do MST authentication based on what we have enabled in stream. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amd/display: Move mod_hdcp_displays to mod_hdcp structIsabel Zhang1-10/+11
[Why] Reset connection is called before remove display in mod_hdcp. When remove display is called, the display structure has been zeroed from reset connection. Since no displays can be found, remove display does not properly reset the hardware. This causes validation errors when another display is plugged into a different port afterwards. [How] Moved displays structure out of connections structure. Displays structure is now directly within mod_hdcp. Displays is no longer zeroed when reset connection is called. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-12drm/amd/display: update HDCP DTM immediately after hardware programmingWenjing Liu1-6/+4
[why] HDCP DTM needs to be aware of the upto date display topology information in order to validate hardware consistency. [how] update HDCP DTM on update_stream_config call. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-12drm/amd/display: no hdcp retry if bksv or ksv list is revokedWenjing Liu1-0/+1
[why] According to the specs when bksv or ksv list fails SRM check, HDCP TX should abort hdcp immediately. However with the current code HDCP will be reattampt upto 4 times. [how] Add the logic that stop HDCP retry if bksv or ksv list is revoked. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-30drm/amd/display: fix spelling mistake link_integiry_check -> link_integrity_checkColin Ian King1-1/+1
There is a spelling mistake on the struct field name link_integiry_check, fix this by renaming it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: split rxstatus for hdmi and dpBhawanpreet Lakha1-18/+2
[Why] Currently we share rxstatus between HDMI and DP, so we use 16bits The drm defines work with 1bytes at a time. So we need to split the HDMI rxstatus into 2bytes before we can use drm defines [How] -create rxstatus for dp and hdmi. rxstatus for hdmi is split into bytes using arrays. -use drm_hdcp defines for the remaining structs Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: use drm defines for MAX CASCADE MASKBhawanpreet Lakha1-4/+0
[Why] drm already has this define [How] drm Mask is 0x08 vs 0x0800. The reason is because drm mask works on a byte. ^^ =======|| || Since the first byte is always zero we can ignore it and only check the second byte. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: add and use defines from drm_hdcp.hBhawanpreet Lakha1-23/+17
[Why] These defines/macros exist already no need to redefine them [How] Use the defines/macros from drm_hdcp.h -we share the rxstatus between HDMI and DP (2 bytes), But upstream defines/macros for HDMI are for 1 byte. So we need to create a separate rxstatus for HDMI Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Add execution and transition states for HDCP2.2Bhawanpreet Lakha1-0/+127
The module works like a state machine +-------------+ ------> | Execution.c | ------ | +-------------+ | | V +----+ +--------+ +--------------+ | DM | -----> | Hdcp.c | <------------ | Transition.c | +----+ <----- +--------+ +--------------+ This patch adds the execution and transition files for 2.2 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Add PSP block to verify HDCP2.2 stepsBhawanpreet Lakha1-0/+44
[Why] All the HDCP transactions should be verified using PSP [How] This patch adds the psp calls we need to verify the steps Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: fix spelling mistake AUTHENICATED -> AUTHENTICATEDColin Ian King1-2/+2
There is a spelling mistake in the macros H1_A45_AUTHENICATED and D1_A4_AUTHENICATED, fix these by adding the missing T. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Add HDCP moduleBhawanpreet Lakha1-0/+442
This module manages HDCP for amdgpu driver. The module behaves as a state machine which handles the different authentication states of HDCP The module is divided into 3 major components +--------+ | Hdcp.c | +--------+ Manages the state machine, sends the events to be executed and communicates with the dm +-----------+ |Execution.c| +-----------+ This executes events based on the current state. Also generates execution results as transition inputs +------------+ |Transition.c| +------------+ Decides the next state based on the input and makes requests to hdcp.c to handle. +-------------+ ------> | Execution.c | ------ | +-------------+ | | V +----+ +--------+ +--------------+ | DM | -----> | Hdcp.c | <------------ | Transition.c | +----+ <----- +--------+ +--------------+ v2: Drop unused function definitions Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.