aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-10-28drm/amd/display: Set phy_mux_sel bit in dmub scratch registerHansen5-3/+9
[Why] B0 has pipe mux for DIGC and DIGD which can be connected to PHYF/PHYG or PHYC/PHY D. [How] Based on chip internal hardware revision id determine it is B0 and set DMUB scratch register so DMUBFW can connect the display pipe is connected correctly to the dig. Cc: Wayne Lin <wayne.lin@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Manually adjust strobe for DCN303Martin Leung1-0/+14
why: DCN303's 4 channel SOC BB causes problems at strobe how: workaround to manually adjust strobe calculation using FCLK restrict. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: 3.2.159Aric Cyr1-1/+1
This new DC version brings improvements in the following areas: - Improvements for USB4; - Isolate FPU code for DCN20, DCN301, and DSC; - Fixes on Linking training; - Refactoring some parts of the code, such as PSR; Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: [FW Promotion] Release 0.0.90Anthony Koo1-2/+2
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Remove unused macrosAnson Jacob3-8/+0
fixed16_to_double & fixed16_to_double_to_cpu are not used. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: allow windowed mpo + odmDmytro Laktyushkin3-17/+28
This change adds a config flag to allow non fullscreen MPO during ODM. Scaling calculation will still fail configurations where video is only one one side of the screen. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: set Layout properly for 8ch audio at timing validationGuo, Bing1-2/+4
Why: For audio packet type 0x02, there are 2 Layouts: Layout = 0 for 2 channels and Layout = 1 for > 2 channels. Layout will affect bandwidth check. Currently, for HDMI FRL, Layout field isn't set and has a default value of 0, so theoretically only 2-channel audio for audio packet type 0x02 is supported now. How: 1. Set Layout properly according to maximum audio channel numbers for audios with audio packet type 0x02. 2. 8ch LPCM audio is not supported for timing modes with v_active <= 576. Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix 3DLUT skipped programmingAric Cyr2-0/+5
We found a compilation error that we thought was caused by the 3DLUT patch; later on, we figured out the root cause of the problem, but we already applied the revert in the wrong patch. This commit brings it back the 3DLUT fix. Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: 3.2.158Aric Cyr1-1/+1
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: [FW Promotion] Release 0.0.89Anthony Koo1-3/+6
- Add flag to control root clock gating in init_hw - Add flag to indicate a diags environment is being used Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Handle I2C-over-AUX write channel status updateAric Cyr4-10/+44
[Why] When writing long AUX commands some sinks will respond will write status update requiring source to read status. [How] When a write request is replied with data (AUX_ACK_M), retry a read of write status to determine when the write is completed. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add comment for preferred_training_settingsGeorge Shen1-0/+4
[Why] Currently the naming of preferred_training_settings is ambiguous and has caused confusion regarding its purpose and usage. [How] Add comment to clarify the intention. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Implement fixed DP drive settingsGeorge Shen6-1/+27
[Why] Currently there are use cases that require DP link to maintain fixed VS and PE in HW regardless of what the sink requests. BIOS integrated info table will specify whether we need to use the fixed drive settings, and the drive settings to use. [How] Implement changes to parse the integrated info table and set the fixed drive settings accordingly. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: restyle dcn31 resource header inline with other asicsDmytro Laktyushkin2-2/+12
Style change for better consistency across codebase Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: clean up dcn31 revision checkDmytro Laktyushkin1-8/+2
This is unnecessary in clk_mgr Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Defer GAMCOR and DSCL power down sequence to vupdateMichael Strauss6-6/+38
[WHY] Every other CM LUT power down sequence is deferred to next vupdate as memory powerdown updates immediately while selecting LUTs is double buffered. Previous update to defer LUT power down missed GAMCOR and DSCL, causing some visible flicker when entering/exiting fullscreen video playback. [HOW] Update dpp deferred update loop to check for valid DPPs in res_pool instead of referencing dcn_ip which turns out to not be populated during runtime. Move GAMCOR and DSCL powerdown to dpp deferred updates. Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Set i2c memory to light sleep during hw initMichael Strauss3-2/+9
[WHY] i2c memory doesn't get set to light sleep on hw init as intended [HOW] Set i2c to light sleep after reg gets zeroed, ensuring memory power control doesn't get disabled for any other DIO memory Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: fix a crash on USB4 over C20 PHYAhmad Othman1-5/+20
[Why] Crash when USB4 is connected. [How] Added an ASIC specific code guard. Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: move FPU associated DSC code to DML folderQingqing Zhuo8-338/+389
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DSC to DML, where all FPU code should locate. This change does not refactor any functions but move code around. Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add support for USB4 on C20 PHY for DCN3.1Ahmad Othman4-6/+64
[Why] Created new fields that matches new B0 structs On DCN31 the mapping of DIO output to PHY differs from A0 to B0 boards with new PHY C20 & this new mapping needed to be handled. [How] Mapped new structure based on new structs Added logic for mapping over A0 and B0 boards Hooked all new structs together. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: dc_link_set_psr_allow_active refactoringRobin Chen10-23/+125
[Why] To expose new power optimization flags to PSR interface. It allows the PSR related power features can be enabled separately base on different use scenarios. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Robin Chen <po-tchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Get ceiling for v_total calcGuo, Bing1-3/+12
Updating certain variable blanking calculations to use ceiling function. Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: dcn20_resource_construct reduce scope of FPU enabledAnson Jacob1-7/+9
Limit when FPU is enabled to only functions that does FPU operations for dcn20_resource_construct, which gets called during driver initialization. Enabling FPU operation disables preemption. Sleeping functions(mutex (un)lock, memory allocation using GFP_KERNEL, etc.) should not be called when preemption is disabled. Fixes the following case caught by enabling CONFIG_DEBUG_ATOMIC_SLEEP in kernel config [ 1.338434] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 1.347395] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 197, name: systemd-udevd [ 1.356356] CPU: 7 PID: 197 Comm: systemd-udevd Not tainted 5.13.0+ #3 [ 1.356358] Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021 [ 1.356360] Call Trace: [ 1.356361] dump_stack+0x6b/0x86 [ 1.356366] ___might_sleep.cold+0x87/0x98 [ 1.356370] __might_sleep+0x4b/0x80 [ 1.356372] mutex_lock+0x21/0x50 [ 1.356376] smu_get_uclk_dpm_states+0x3f/0x80 [amdgpu] [ 1.356538] pp_nv_get_uclk_dpm_states+0x35/0x50 [amdgpu] [ 1.356711] init_soc_bounding_box+0xf9/0x210 [amdgpu] [ 1.356892] ? create_object+0x20d/0x340 [ 1.356897] ? dcn20_resource_construct+0x46f/0xd30 [amdgpu] [ 1.357077] dcn20_resource_construct+0x4b1/0xd30 [amdgpu] ... Tested on: 5700XT (NAVI10 0x1002:0x731F 0x1DA2:0xE410 0xC1) Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Align bw context with hw config when system resumeLewis Huang1-0/+6
[Why] When the vbios config and driver config are different, if we update clock to lower before call program_timing and program_pixel_clk, garbage appear. [How] Align bw context with hw config when system resume Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu/display: add quirk handling for stutter modeAlex Deucher1-0/+33
Stutter mode is a power saving feature on GPUs, however at least one early raven system exhibits stability issues with it. Add a quirk to disable it for that system. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214417 Fixes: 005440066f929b ("drm/amdgpu: enable gfxoff again on raven series (v2)") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie2-1/+7
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-27drm/amd/display: Fix deadlock when falling back to v2 from v3Nicholas Kazlauskas1-4/+2
[Why] A deadlock in the kernel occurs when we fallback from the V3 to V2 add_topology_to_display or remove_topology_to_display because they both try to acquire the dtm_mutex but recursive locking isn't supported on mutex_lock(). [How] Make the mutex_lock/unlock more fine grained and move them up such that they're only required for the psp invocation itself. Fixes: bf62221e9d0e ("drm/amd/display: Add DCN3.1 HDCP support") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-27drm/amd/display: Fallback to clocks which meet requested voltage on DCN31Michael Strauss1-3/+10
[WHY] On certain configs, SMU clock table voltages don't match which cause parser to behave incorrectly by leaving dcfclk and socclk table entries unpopulated. [HOW] Currently the function that finds the corresponding clock for a given voltage only checks for exact voltage level matches. In the case that no match gets found, parser now falls back to searching for the max clock which meets the requested voltage (i.e. its corresponding voltage is below requested). Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-27drm/amdgpu: Fix even more out of bound writes from debugfsPatrik Jakobsson1-9/+9
CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) Fixes: 918698d5c2b5 ("drm/amd/display: Return the number of bytes parsed than allocated") Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-28Merge tag 'topic/amdgpu-dp2.0-mst-2021-10-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie8-1/+383
UAPI Changes: Nope! Cross-subsystem Changes: drm_dp_update_payload_part1() takes a new argument for specifying what the VCPI slot start is Core Changes: Make the DP MST helpers aware of the current starting VCPI slot/VCPI total slot count... Driver Changes: ...and then add support for taking advantage of this for 128b/132b links on DP 2.0 for amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/bf8e724cc0c8803d58a8d730fd6883c991376a76.camel@redhat.com
2021-10-27drm/amdgpu/display: fix build when CONFIG_DRM_AMD_DC_DCN is not setAlex Deucher2-2/+4
Need to guard some things with CONFIG_DRM_AMD_DC_DCN. Fixes: 41724ea273cdda ("drm/amd/display: Add DP 2.0 MST DM Support") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211027223914.1776061-1-alexander.deucher@amd.com
2021-10-25drm/amd/display: Add DP 2.0 MST DM SupportBhawanpreet Lakha3-1/+36
[Why] Add DP2 MST and debugfs support [How] Update the slot info based on the link encoding format Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-5-lyude@redhat.com
2021-10-25drm/amd/display: Add DP 2.0 MST DC SupportFangzhi Zuo5-0/+345
[Why] configure/call DC interface for DP2 mst support. This is needed to make DP2 mst work. [How] - add encoding type, logging, mst update/reduce payload functions Use the link encoding to determine the DP type (1.4 or 2.0) and add a flag to dc_stream_update to determine whether to increase/reduce payloads. v2: * add DP_UNKNOWN_ENCODING handling Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-4-lyude@redhat.com
2021-10-25drm: Update MST First Link Slot Information Based on Encoding FormatBhawanpreet Lakha1-1/+1
8b/10b encoding format requires to reserve the first slot for recording metadata. Real data transmission starts from the second slot, with a total of available 63 slots available. In 128b/132b encoding format, metadata is transmitted separately in LLCP packet before MTP. Real data transmission starts from the first slot, with a total of 64 slots available. v2: * Move total/start slots to mst_state, and copy it to mst_mgr in atomic_check v3: * Only keep the slot info on the mst_state * add a start_slot parameter to the payload function, to facilitate non atomic drivers (this is a temporary workaround and should be removed when we are moving out the non atomic driver helpers) v4: *fixed typo and formatting v5: (no functional changes) * Fixed formatting in drm_dp_mst_update_slots() * Reference mst_state instead of mst_state->mgr for debugging info Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> [v5 nitpicks] Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-3-lyude@redhat.com
2021-10-22amd/display: remove ChromeOS workaroundSimon Ser1-51/+0
This reverts commits ddab8bd788f5 ("drm/amd/display: Fix two cursor duplication when using overlay") and e7d9560aeae5 ("Revert "drm/amd/display: Fix overlay validation by considering cursors""). tl;dr ChromeOS uses the atomic interface for everything except the cursor. This is incorrect and forces amdgpu to disable some hardware features. Let's revert the ChromeOS-specific workaround in mainline and allow the Chrome team to keep it internally in their own tree. See [1] for more details. This patch is an alternative to [2], which added ChromeOS detection. [1]: https://lore.kernel.org/amd-gfx/JIQ_93_cHcshiIDsrMU1huBzx9P9LVQxucx8hQArpQu7Wk5DrCl_vTXj_Q20m_L-8C8A5dSpNcSJ8ehfcCrsQpfB5QG_Spn14EYkH9chtg0=@emersion.fr/ [2]: https://lore.kernel.org/amd-gfx/20211011151609.452132-1-contact@emersion.fr/ Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Fixes: ddab8bd788f5 ("drm/amd/display: Fix two cursor duplication when using overlay") Fixes: e7d9560aeae5 ("Revert "drm/amd/display: Fix overlay validation by considering cursors"") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amdgpu: support B0&B1 external revision id for yellow carpAaron Liu1-1/+1
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02. The external rev_id for B0 and B1 is 0x20. The original expression is not suitable for B1. v2: squash in fix for display code (Alex) Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Moved dccg init to after bios golden initJake Wang1-4/+3
[Why] bios_golden_init will override dccg_init during init_hw. [How] Move dccg_init to after bios_golden_init. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Increase watermark latencies for DCN3.1Nikola Cornij1-8/+8
[why] The original latencies were causing underflow in some modes [how] Replace with the up-to-date watermark values based on new measurments Reviewed-by: Ahmad Othman <ahmad.othman@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: increase Z9 latency to workaround underflow in Z9Eric Yang1-2/+2
[Why] Z9 latency is higher than when we originally tuned the watermark parameters, causing underflow. Increasing the value until the latency issues is resolved. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Require immediate flip support for DCN3.1 planesNicholas Kazlauskas1-0/+7
[Why] Immediate flip can be enabled dynamically and has higher BW requirements when validating which voltage mode to use. If we validate when it's not set then potentially DCFCLK will be too low and we will underflow. [How] DM always requires support so always require it as part of DML input parameters. This can't be enabled unconditionally on older ASIC because it blocks some expected modes so only target DCN3.1 for now. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Fix prefetch bandwidth calculation for DCN3.1Nicholas Kazlauskas1-3/+3
[Why] Prefetch BW calculated is lower than the DML reference because of a porting error that's excluding cursor and row bandwidth from the pixel data bandwidth. [How] Change the dml_max4 to dml_max3 and include cursor and row bandwidth in the same calculation as the rest of the pixel data during vactive. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1Nikola Cornij1-1/+1
[why] The requirement is that image width up to 4096 shall be supported Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amdgpu: fix out of bounds writeThelford Williams1-1/+1
Size can be any value and is user controlled resulting in overwriting the 40 byte array wr_buf with an arbitrary length of data from buf. Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amdgpu: support B0&B1 external revision id for yellow carpAaron Liu1-1/+1
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02. The external rev_id for B0 and B1 is 0x20. The original expression is not suitable for B1. v2: squash in fix for display code (Alex) Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19Revert "drm/amd/display: Add helper for blanking all dp displays"Agustin Gutierrez6-59/+130
This reverts commit 1445d967fb915156aed0e79ca80c239cb2d414ce. This patch introduced a couple of dmesg warnings, this is not a valid approach anymore. For this reason, we are reverting this patch, and we need to revert the workaround patch. v2: squash in unused variable removal (Alex) Cc: Hanghong Ma <hanghong.ma@amd.com> Cc: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19Revert "drm/amd/display: Fix error in dmesg at boot"Agustin Gutierrez1-2/+2
This reverts commit 4874ecf5fd1de008756a76796bf255d3b19715c1. Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: [FW Promotion] Release 0.0.88Anthony Koo1-2/+2
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Add bios parser support for latest firmware_infoNevenko Stupar1-1/+89
[Why] V3_4 is latest in use. [How] Add bios parser support for firmware_info_v3_4 along with some relevant fields it is also retrieving from dce_info and smu_info. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: 3.2.157Aric Cyr1-1/+1
This DC patchset brings improvements in multiple areas. In summary, we highlight: * Fix some issues such as DP2 problem, prefetch bandwidth calculation for DCN3.1 and others. * Increased Z9 latency and removed z10 save after dsc disable. * Revert a couple of bad changes. * Added missing PSR state patch. Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Change initializer to single braceAnthony Koo5-26/+25
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.