aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-25drm/amd/display: change to runtime initialization for reg offsets for DCN32Aurabindo Pillai2-296/+1434
DC was using compile time initialization of register addresses using SR_* macros and their variants. These have been converted to use runtime initialization. The REG_STRUCT macro is a definition that is added to SR_* macros. During initialization, this must be defined before SR_* macros are invoked, which are in turn invoked through various IP initialization macros. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: Change AUX NACK behaviorIlya Bakoulin1-7/+5
[Why] Retrying on receiving a NACK can result in long overall EDID read times in some cases. [How] Retry only on DEFER and return immediately on NACK. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: HDMI ODM Combine Policy CorrectionSaaem Rizvi3-8/+1
[WHY] Reprogramming the stream despite no changes in ODM combine mode. Reprogramming the stream would cause intermittent black screen on display which could only be recovered through enable/disable sequence. [HOW] Fixed bug where we detected a change in ODM combine mode despite ODM combine mode being disabled. Also removed code which required stream to be reprogrammed once a change in ODM combine mode was noticed. Lastly we do not support dynamic ODM switching for HDMI TMDS and FRL on DCN32, therefore we never want to change its ODM policy. Reviewed-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: fix odm 2:1 policy not being applied consistently in 4k144 modesSamson Tam1-0/+5
[Why] odm 2:1 policy is splitting the pipes in 4k144. then in subvp code, we merge the pipes. but since the configuration is unsupported, we keep the pipes split [How] for unsupported subvp configuration, redo the dml and pipe split calls Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: do not change pipe split policy for RV2Derek Lai4-29/+31
[Why] RV2 do not change pipe split policy in the minimal pipe split transition state. This will unblock mode support on some parts that limit to DPM0 for power reason. [How] Do not change pipe split policy in the minimal pipe split transition state to allow 4k multi display configs to be supported at DPM0. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Derek Lai <Derek.Lai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: 3.2.199Aric Cyr1-1/+1
This verion brings along following fixes: -Add scaling factor for SubVP -Modify stop_dbg_mode return value -Add gfx_off members and document -Add GFXOFF function for vangogh -Add GFXOFF stats to debug -Fix codestyle problems -Fix overflow on MIN_I64 -Fix Unneeded semicolon -Fix comment typo -Remove useless condition in amdgpu_job_stop_all_jobs_on_sched() -Add decoder_iv_ts helper for ih_v6 -Add chip version to DCN32 -Avoid doing vm_init multiple time -Modify size calculation in MALL -Fix DSC for phantom pipes -Update clock table policy for DCN314 -Modify header inclusion pattern -Fix plug/unplug external monitor will playback MPO video -Add debug parameter to retain default clock table -Increase tlb flush timeout for sriov -Fix compare intergers of different widths -Add reserved dc_log_type -Fix pixel clock programming Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: [FW Promotion] Release 0.0.130.0Anthony Koo1-2/+14
- For SubVP add scaling factor to allow firmware to calculate accurate line to start programming Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-22drm/amd/display: remove unneeded defines from bios parserTales Aparecida1-19/+0
Removes DEFINEs that should have been removed after they were introduced to ObjectID.h by the commit abea57d70e90 ("drm/amdgpu: Add BRACKET_LAYOUT_ENUMs to ObjectID.h") Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-22drm/amd/display: enable PCON support for dcn314Roman Li1-0/+1
[Why] DCN314 supports PCON. [How] Explicitly enable it in dcn314 resources. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-22drm/amd/display: remove unused headerMagali Lemes1-34/+0
dml_wrapper* files were removed in commit 01b537eeb049 ("drm/amd/display: Remove unused code"), as they are not used anywhere. However, the header file wasn't removed, so remove the header as well. Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-22drm/amd/display: Include missing headerMaíra Canal2-10/+3
The file amdgpu_dm_plane.c missed the header amdgpu_dm_plane.h, which resulted on the following warning: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1046:5: warning: no previous prototype for 'fill_dc_scaling_info' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1222:6: warning: no previous prototype for 'handle_cursor_update' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:152:6: warning: no previous prototype for 'modifier_has_dcc' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1576:5: warning: no previous prototype for 'amdgpu_dm_plane_init' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:157:10: warning: no previous prototype for 'modifier_gfx9_swizzle_mode' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:752:5: warning: no previous prototype for 'fill_plane_buffer_attributes' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:83:31: warning: no previous prototype for 'amd_get_format_info' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:88:6: warning: no previous prototype for 'fill_blending_from_plane_state' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:992:5: warning: no previous prototype for 'dm_plane_helper_check_state' [-Wmissing-prototypes] Therefore, include the missing header on the file and turn global functions that are not used outside of the file into static functions. Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-22drm/amd/display: remove unneeded semicolonYang Li1-1/+1
Semicolon is not required after curly braces. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1918 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-22drm/amd/display: fix i386 frame size warningHamza Mahfooz1-232/+63
Addresses the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3596:6: error: stack frame size (2092) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ UseMinimumDCFCLK() is eating away at dml30_ModeSupportAndSystemConfigurationFull()'s stack space, so use a pointer to struct vba_vars_st instead of passing lots of large arrays as parameters by value. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: fix minor codestyle problemsTales Aparecida1-6/+4
Fixes five checkpatch warnings: CHECK: Please don't use multiple blank lines + + ERROR: Macros with complex values should be enclosed in parentheses +#define MAX_I64 \ + (int64_t)((1ULL << 63) - 1) WARNING: Missing a blank line after declarations + struct bw_fixed res; + ASSERT(value < BW_FIXED_MAX_I32 && value > BW_FIXED_MIN_I32); ERROR: that open brace { should be on the previous line + do + { ERROR: that open brace { should be on the previous line + if (remainder >= arg2_value) + { Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: fix overflow on MIN_I64 definitionDavid Gow1-3/+3
The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about integer overflow, because it is treated as a positive value, which is then negated. The temporary positive value is not necessarily representable. This causes the following warning: ../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19: warning: integer overflow in expression ‘-9223372036854775808’ of type ‘long long int’ results in ‘-9223372036854775808’ [-Woverflow] 30 | (int64_t)(-(1LL << 63)) | ^ Writing out (-MAX_I64 - 1) works instead. Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Unneeded semicolonmin tang1-1/+1
There is no semicolon after '}' in line 510. Signed-off-by: min tang <tangmin@cdjrlc.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Fix comment typomin tang1-1/+1
The double `aligned' is duplicated in line 1070, remove one. Signed-off-by: min tang <tangmin@cdjrlc.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Remove unused codeRodrigo Siqueira2-2168/+0
We have some old code associated with DML, which we had plans to use, but at some point, we just moved away from it. This commit removes the dml_wrapper* files since they are not used anymore. Reported-by: Magali Lemes <magalilemes00@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: include soc._clock_tmp[] into DC's scratch regionHamza Mahfooz5-77/+91
Currently, we are using soc._clock_tmp[] to temporarily store and modify data from soc.clock_limits[] before copying it back into soc.clock_limits[] (because modifying data directly in soc.clock_limits[] causes unintended behavior). However, this approach has a number of downsides, such as: 1. struct _vcs_dpi_soc_bounding_box_st's creation/destruction aren't well defined (which could mean more unintended behavior). 2. Throwing "temp" varibles in structs everywhere doesn't make for a particularly readable codebase. For these reasons, we should get rid of soc._clock_tmp[] by defining a struct scratch within struct dc that, contains within it all of the temporary variables (including _clock_tmp[]) such that it is obvious how they are intended to be used. Co-authored-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: implement DSC pass-through supportHamza Mahfooz1-4/+41
Currently, we only attempt to setup DSC at the virtual DPCD port, however many modern displays come with DSC support and MST hubs can now support DSC pass-through. So, to more optimally make use of the available bandwidth, use DSC pass-through when possible by adding DSC pass-through enablement support into the DSC enable sequence. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: consider DSC pass-through during mode validationHamza Mahfooz1-6/+78
Add a mode validation routine for DSC pass-through. Both the link from source to hub, and the link from hub to monitor are checked, according to the current link training result and full pbn returned by enum path resource sideband message. Pick up the minimum value as the bandwidth bottleneck for the end to end link bandwidth constraint, and check if the maximum DSC decompression bandwidth can fit. v2: squash in DSC CONFIG_DRM_AMD_DC_DCN compilation fix (Hamza) Co-authored-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: add doc entries for MPC blending configurationMelissa Wen1-14/+77
Describe structs and enums used to set blend mode properties to MPC blocks. Some pieces of information are already available as code comments, and were just formatted. Others were collected and summarised from discussions on AMD issue tracker[1][2]. [1] https://gitlab.freedesktop.org/drm/amd/-/issues/1734 [2] https://gitlab.freedesktop.org/drm/amd/-/issues/1769 v2: - fix typos (Tales) - add MPCC to MPC entry in the glossary Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16Documentation/amdgpu/display: add DC color caps infoMelissa Wen1-13/+64
Add details about color correction capabilities and explain a bit about differences between DC hw generations and also how they are mapped between DRM and DC interface. Two schemas for DCN 2.0 and 3.0 (converted to svg from the original png) is included to illustrate it. They were obtained from a discussion[1] in the amd-gfx mailing list. [1] https://lore.kernel.org/amd-gfx/20220422142811.dm6vtk6v64jcwydk@mail.igalia.com/ v1: - remove redundant comments (Harry) - fix typos (Harry) v2: - reword introduction of color section - add co-dev tag for Harry - who provided most of the info - fix typos (Tales) - describe missing struct parameters (Tales and Siqueira) Co-developed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16Documentation/amdgpu_dm: Add DM color correction documentationMelissa Wen1-28/+81
AMDGPU DM maps DRM color management properties (degamma, ctm and gamma) to DC color correction entities. Part of this mapping is already documented as code comments and can be converted as kernel docs. v2: - rebase to amd-staging-drm-next - fix typos (Tales) - undo kernel-docs inside functions (Tales) Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Document some of the DML structsRodrigo Siqueira1-0/+34
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Expand documentation for timingRodrigo Siqueira2-0/+100
The timing programming inside DCN is far from trivial, it has multiple parameters associated with that, and the lack of documentation does not help comprehend this already complicated topic. This commit tries to improve this situation by expanding the documentation of dc_crtc_timing and the VTG program function. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Document pipe split policyRodrigo Siqueira1-0/+35
In the DCN code, we can find some references to three different pipe split policies but no clear description. This commit adds some kernel-doc that explains more about these options and a little bit of their impact. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add some extra kernel doc to amdgpu_dmRodrigo Siqueira2-8/+54
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add basic kernel doc to CRC code under DCRodrigo Siqueira4-14/+46
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add documentation to some of the cursor structRodrigo Siqueira1-7/+55
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Include scaling factor for SubVP commandAlvin Lee4-1/+36
[Description] For SubVP scaling cases, we must include the scaling info as part of the cmd. This is required when converting OTG line to HUBP line for the MALL_START_LINE programming. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: add chip revision to DCN32Samson Tam1-1/+3
[Why & How] Add GC_11_0_3_A0 as a chip revision to the DCN32 family Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: avoid doing vm_init multiple timeCharlene Liu1-1/+7
[why] this is to ensure that driver will not reprogram hvm_prefetch_req again if it is done. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Use pitch when calculating size to cache in MALLAlvin Lee1-1/+1
[Description] Use pitch when calculating size to cache in MALL Reviewed-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Don't set DSC for phantom pipesAlvin Lee1-0/+1
[Description] Don't set DSC bit for phantom pipes, not required since phantom pipe don't have any actual output Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Update clock table policy for DCN314Nicholas Kazlauskas2-65/+154
[Why & How] Depending on how the clock table is constructed from PMFW we can run into issues where we don't think we have enough bandwidth available due to FCLK too low - eg. when the FCLK table contains invalid entries or a single entry. We should always pick up the maximum clocks for each state as a final state in this case to prevent validation from failing if the table is malformed. We should also contain sensible defaults in the case where values are invalid. Redfine the clock table structures by adding a 314 prefix to make debugging these issues easier by avoiding symbol name clashes. Overall this policy more closely aligns to how we did things for 315, but because of how the voltage rail is setup we should favor keeping DCFCLK low rather than DISPCLK or DPPCLK - so use the max for those in every entry. Reviewed-by: Daniel Miess <daniel.miess@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Modify header inclusion patternChaitanya Dhere2-2/+2
[Why] Recent backport from opensource broke the Nightly tool build that tests DC and DML for bugs and regressions. This was because the backport had a header inclusion that was not consistent with the AMD style of including headers was allowed to be merged back in DML code that caused tool compilation failures. [How] Modify the way in which the header file in included so that it is consistent with AMD style of including headers. This then automatically fixes the tool compilation process and also helps maintain the code quality and consistency. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Fix plug/unplug external monitor will hang while playback MPO videoTom Chung1-2/+9
[Why] Pipes for MPO primary and overlay will be power down and power up during plug/unplug external monitor while MPO video playback. But the pipes were the same after plug/unplug and should not need to be power down and power up or it will make page flip interrupt disabled and cause hang issue. [How] Add pipe split change condition that not only check the top pipe pointer but also check the index of top pipe if both top pipes are available. Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add debug parameter to retain default clock tableDaniel Miess3-2/+3
[Why] Need a way to retain default clock table to aid the investigation into why 8k@30 display not lighting up on dcn314 [How] Use flag to prevent execution of bw_params helper function and function for updating bw_bounding_box Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: do not compare integers of different widthsJosip Pavic1-1/+2
[Why & How] Increase width of some variables to avoid comparing integers of different widths. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add reserved dc_log_type.Ian Chen1-1/+3
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Fix pixel clock programmingIlya Bakoulin1-0/+2
[Why] Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned between different HDMI lanes when using YCbCr420 10-bit pixel format. BIOS functions for transmitter/encoder control take pixel clock in kHz increments, whereas the function for setting the pixel clock is in 100Hz increments. Setting pixel clock to a value that is not on a kHz boundary will cause the issue. [How] Round pixel clock down to nearest kHz in 10/12-bpc cases. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: 3.2.198Aric Cyr1-1/+1
This version brings along following fixes: -Fix edp panel missing event -Set ARGB16161616 pixel format to 26 -Fix dcn32 interger issue -Clear optc underflow bit after ODM clock off -Fix issue with stereo3D -Fix DML2 lightup issue -Correct DTBCLK for dcn314 -Revert for a regression -Fix clocks and bugs in DML2 -Enable SubVP by defalut on DCN32 & DCN321 -Corret boundary condition for engin ID on DCN303 -Fix FRL encoder override registry key -Fix VPG for dcn314 HPO -Fix Linux compile-time warning -Add new prefetch modes in DML for DCN32 Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: reverted limiting vscsdp_for_colorimetry and ARGB16161616 pixel format additionEthan Wellenreiter5-12/+0
[WHY] Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green point failures in HDR10 DTN tests. The re-implementation of ARGB16161616 was to fix this however it did not actually fix this issue but a side effect of the issue. [HOW] Change ARGB16161616 pixel format to 26. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amdgpu: Only disable prefer_shadow on hawaiiAlex Deucher1-2/+5
We changed it for all asics due to a hibernation regression on hawaii, but the workaround breaks suspend on a polaris12. Just disable it for hawaii. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216119 Fixes: 3a4b1cc28fbd ("drm/amdgpu/display: disable prefer_shadow for generic fb helpers") Reviewed-and-tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-08-10drm/amd/display: set panel orientation before drm_dev_registerMelissa Wen1-2/+6
To set the panel orientation property with quirk, we need the mode size provided by EDID. This info is available after EDID is read by dc_link_detect() and updated by amdgpu_dm_update_connector_after_detect(). The detection happens at driver load in amdgpu_dm_initialize_drm_device() and, therefore, we can get modes and set panel orientation before drm_dev_register() to avoid DRM warns on creating the connector property after device registration: [ 2.563969] ------------[ cut here ]------------ [ 2.563971] WARNING: CPU: 6 PID: 325 at drivers/gpu/drm/drm_mode_object.c:45 drm_mode_object_add+0x72/0x80 [drm] [ 2.563997] Modules linked in: btusb btrtl btbcm btintel btmtk bluetooth rfkill ecdh_generic ecc usbhid crc16 amdgpu(+) drm_ttm_helper ttm agpgart gpu_sched i2c_algo_bit drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm serio_raw sdhci_pci atkbd libps2 cqhci vivaldi_fmap ccp sdhci i8042 crct10dif_pclmul crc32_pclmul hid_multitouch ghash_clmulni_intel aesni_intel crypto_simd cryptd wdat_wdt mmc_core cec xhci_pci sp5100_tco rng_core xhci_pci_renesas serio 8250_dw i2c_hid_acpi i2c_hid btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_mirror dm_region_hash dm_log dm_mod pkcs8_key_parser crypto_user [ 2.564032] CPU: 6 PID: 325 Comm: systemd-udevd Not tainted 5.18.0-amd-staging-drm-next+ #67 [ 2.564034] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0105 03/21/2022 [ 2.564036] RIP: 0010:drm_mode_object_add+0x72/0x80 [drm] [ 2.564053] Code: f0 89 c3 85 c0 78 07 89 45 00 44 89 65 04 4c 89 ef e8 e2 99 04 f1 31 c0 85 db 0f 4e c3 5b 5d 41 5c 41 5d c3 80 7f 50 00 74 ac <0f> 0b eb a8 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 4c [ 2.564055] RSP: 0018:ffffb2e880413860 EFLAGS: 00010202 [ 2.564056] RAX: ffffffffc0ba1440 RBX: ffff99508a860010 RCX: 0000000000000001 [ 2.564057] RDX: 00000000b0b0b0b0 RSI: ffff99508c050110 RDI: ffff99508a860010 [ 2.564058] RBP: ffff99508c050110 R08: 0000000000000020 R09: ffff99508c292c20 [ 2.564059] R10: 0000000000000000 R11: ffff99508c0507d8 R12: 00000000b0b0b0b0 [ 2.564060] R13: 0000000000000004 R14: ffffffffc068a4b6 R15: ffffffffc068a47f [ 2.564061] FS: 00007fc69b5f1a40(0000) GS:ffff9953aff80000(0000) knlGS:0000000000000000 [ 2.564063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.564063] CR2: 00007f9506804000 CR3: 0000000107f92000 CR4: 0000000000350ee0 [ 2.564065] Call Trace: [ 2.564068] <TASK> [ 2.564070] drm_property_create+0xc9/0x170 [drm] [ 2.564088] drm_property_create_enum+0x1f/0x70 [drm] [ 2.564105] drm_connector_set_panel_orientation_with_quirk+0x96/0xc0 [drm] [ 2.564123] get_modes+0x4fb/0x530 [amdgpu] [ 2.564378] drm_helper_probe_single_connector_modes+0x1ad/0x850 [drm_kms_helper] [ 2.564390] drm_client_modeset_probe+0x229/0x1400 [drm] [ 2.564411] ? xas_store+0x52/0x5e0 [ 2.564416] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.564420] __drm_fb_helper_initial_config_and_unlock+0x44/0x4e0 [drm_kms_helper] [ 2.564430] drm_fbdev_client_hotplug+0x173/0x210 [drm_kms_helper] [ 2.564438] drm_fbdev_generic_setup+0xa5/0x166 [drm_kms_helper] [ 2.564446] amdgpu_pci_probe+0x35e/0x370 [amdgpu] [ 2.564621] local_pci_probe+0x45/0x80 [ 2.564625] ? pci_match_device+0xd7/0x130 [ 2.564627] pci_device_probe+0xbf/0x220 [ 2.564629] ? sysfs_do_create_link_sd+0x69/0xd0 [ 2.564633] really_probe+0x19c/0x380 [ 2.564637] __driver_probe_device+0xfe/0x180 [ 2.564639] driver_probe_device+0x1e/0x90 [ 2.564641] __driver_attach+0xc0/0x1c0 [ 2.564643] ? __device_attach_driver+0xe0/0xe0 [ 2.564644] ? __device_attach_driver+0xe0/0xe0 [ 2.564646] bus_for_each_dev+0x78/0xc0 [ 2.564648] bus_add_driver+0x149/0x1e0 [ 2.564650] driver_register+0x8f/0xe0 [ 2.564652] ? 0xffffffffc1023000 [ 2.564654] do_one_initcall+0x44/0x200 [ 2.564657] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.564659] do_init_module+0x4c/0x250 [ 2.564663] __do_sys_init_module+0x12e/0x1b0 [ 2.564666] do_syscall_64+0x3b/0x90 [ 2.564670] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2.564673] RIP: 0033:0x7fc69bff232e [ 2.564674] Code: 48 8b 0d 45 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 12 0b 0c 00 f7 d8 64 89 01 48 [ 2.564676] RSP: 002b:00007ffe872ba3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 2.564677] RAX: ffffffffffffffda RBX: 000055873f797820 RCX: 00007fc69bff232e [ 2.564678] RDX: 000055873f7bf390 RSI: 0000000001155e81 RDI: 00007fc699e4d010 [ 2.564679] RBP: 00007fc699e4d010 R08: 000055873f7bfe20 R09: 0000000001155e90 [ 2.564680] R10: 000000055873f7bf R11: 0000000000000246 R12: 000055873f7bf390 [ 2.564681] R13: 000000000000000d R14: 000055873f7c4cb0 R15: 000055873f797820 [ 2.564683] </TASK> [ 2.564683] ---[ end trace 0000000000000000 ]--- [ 2.564696] ------------[ cut here ]------------ [ 2.564696] WARNING: CPU: 6 PID: 325 at drivers/gpu/drm/drm_mode_object.c:242 drm_object_attach_property+0x52/0x80 [drm] [ 2.564717] Modules linked in: btusb btrtl btbcm btintel btmtk bluetooth rfkill ecdh_generic ecc usbhid crc16 amdgpu(+) drm_ttm_helper ttm agpgart gpu_sched i2c_algo_bit drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm serio_raw sdhci_pci atkbd libps2 cqhci vivaldi_fmap ccp sdhci i8042 crct10dif_pclmul crc32_pclmul hid_multitouch ghash_clmulni_intel aesni_intel crypto_simd cryptd wdat_wdt mmc_core cec xhci_pci sp5100_tco rng_core xhci_pci_renesas serio 8250_dw i2c_hid_acpi i2c_hid btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_mirror dm_region_hash dm_log dm_mod pkcs8_key_parser crypto_user [ 2.564738] CPU: 6 PID: 325 Comm: systemd-udevd Tainted: G W 5.18.0-amd-staging-drm-next+ #67 [ 2.564740] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0105 03/21/2022 [ 2.564741] RIP: 0010:drm_object_attach_property+0x52/0x80 [drm] [ 2.564759] Code: 2d 83 f8 18 74 33 48 89 74 c1 08 48 8b 4f 08 48 89 94 c1 c8 00 00 00 48 8b 47 08 83 00 01 c3 4d 85 d2 75 dd 83 7f 58 01 75 d7 <0f> 0b eb d3 41 80 78 50 00 74 cc 0f 0b eb c8 44 89 ce 48 c7 c7 28 [ 2.564760] RSP: 0018:ffffb2e8804138d8 EFLAGS: 00010246 [ 2.564761] RAX: 0000000000000010 RBX: ffff99508c1a2000 RCX: ffff99508c1a2180 [ 2.564762] RDX: 0000000000000003 RSI: ffff99508c050100 RDI: ffff99508c1a2040 [ 2.564763] RBP: 00000000ffffffff R08: ffff99508a860010 R09: 00000000c0c0c0c0 [ 2.564763] R10: 0000000000000000 R11: 0000000000000020 R12: ffff99508a860010 [ 2.564764] R13: ffff995088733008 R14: ffff99508c1a2000 R15: ffffffffc068a47f [ 2.564765] FS: 00007fc69b5f1a40(0000) GS:ffff9953aff80000(0000) knlGS:0000000000000000 [ 2.564766] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.564767] CR2: 00007f9506804000 CR3: 0000000107f92000 CR4: 0000000000350ee0 [ 2.564768] Call Trace: [ 2.564769] <TASK> [ 2.564770] drm_connector_set_panel_orientation_with_quirk+0x4a/0xc0 [drm] [ 2.564789] get_modes+0x4fb/0x530 [amdgpu] [ 2.565024] drm_helper_probe_single_connector_modes+0x1ad/0x850 [drm_kms_helper] [ 2.565036] drm_client_modeset_probe+0x229/0x1400 [drm] [ 2.565056] ? xas_store+0x52/0x5e0 [ 2.565060] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.565062] __drm_fb_helper_initial_config_and_unlock+0x44/0x4e0 [drm_kms_helper] [ 2.565072] drm_fbdev_client_hotplug+0x173/0x210 [drm_kms_helper] [ 2.565080] drm_fbdev_generic_setup+0xa5/0x166 [drm_kms_helper] [ 2.565088] amdgpu_pci_probe+0x35e/0x370 [amdgpu] [ 2.565261] local_pci_probe+0x45/0x80 [ 2.565263] ? pci_match_device+0xd7/0x130 [ 2.565265] pci_device_probe+0xbf/0x220 [ 2.565267] ? sysfs_do_create_link_sd+0x69/0xd0 [ 2.565268] really_probe+0x19c/0x380 [ 2.565270] __driver_probe_device+0xfe/0x180 [ 2.565272] driver_probe_device+0x1e/0x90 [ 2.565274] __driver_attach+0xc0/0x1c0 [ 2.565276] ? __device_attach_driver+0xe0/0xe0 [ 2.565278] ? __device_attach_driver+0xe0/0xe0 [ 2.565279] bus_for_each_dev+0x78/0xc0 [ 2.565281] bus_add_driver+0x149/0x1e0 [ 2.565283] driver_register+0x8f/0xe0 [ 2.565285] ? 0xffffffffc1023000 [ 2.565286] do_one_initcall+0x44/0x200 [ 2.565288] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.565290] do_init_module+0x4c/0x250 [ 2.565291] __do_sys_init_module+0x12e/0x1b0 [ 2.565294] do_syscall_64+0x3b/0x90 [ 2.565296] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2.565297] RIP: 0033:0x7fc69bff232e [ 2.565298] Code: 48 8b 0d 45 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 12 0b 0c 00 f7 d8 64 89 01 48 [ 2.565299] RSP: 002b:00007ffe872ba3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 2.565301] RAX: ffffffffffffffda RBX: 000055873f797820 RCX: 00007fc69bff232e [ 2.565302] RDX: 000055873f7bf390 RSI: 0000000001155e81 RDI: 00007fc699e4d010 [ 2.565303] RBP: 00007fc699e4d010 R08: 000055873f7bfe20 R09: 0000000001155e90 [ 2.565303] R10: 000000055873f7bf R11: 0000000000000246 R12: 000055873f7bf390 [ 2.565304] R13: 000000000000000d R14: 000055873f7c4cb0 R15: 000055873f797820 [ 2.565306] </TASK> [ 2.565307] ---[ end trace 0000000000000000 ]--- -- v2: - call amdgpu_dm_connector_get_modes() instead of ddc_get_modes() (Harry) Fixes: d77de7880e0e0 ("amd/display: enable panel orientation quirks") Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: 3.2.197Aric Cyr1-1/+1
This version brings along following fixes: - Move fpu file to dml folder - Fix CAB allocation for multiple displays - Add a variable to update FCLK - Fix TMDS 4K@60Hz YCbCr420 corruption issue - Fix MPC tree infinite loop in some case - Fix HDMI VSIF V3 blank screen issue - Add some documentation to the code - Allow alternate prefetch modes in DML for DCN32 - Fix VPG instancing for dcn314 HPO - Check correct bounds for stream encoder instances for DCN303 - Enable SubVP by default on DCN32 & DCN321 - Fix DTBCLK not correct for dcn314 - Fix Compile-time warning - Fix the stereo mode hang issue - Fix display light up issue Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Add 16 lines margin for SubVPAlvin Lee6-4/+10
[Description] SUBVP_START_LINE must be aligned to 2 swaths, so add 16 lines of margin so the start line can be adjusted by up to 16 lines for alignment purposes in FW. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Fix TDR eDP and USB4 display light up issueMeenakshikumar Somasundaram2-0/+2
[Why] After TDR recovery, eDP and USB4 display does not light up. Because dmub outbox notifications are not enabled after dmub reload and link encoder assignments for the streams are not cleared before dc state reset. [How] - Dmub outbox notification is enabled after tdr recovery by issuing inbox command to dmub. - Link encoders for the streams are unassigned before dc state reset. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: clear optc underflow before turn off odm clockFudong Wang1-0/+5
[Why] After ODM clock off, optc underflow bit will be kept there always and clear not work. We need to clear that before clock off. [How] Clear that if have when clock off. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fudong Wang <Fudong.Wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.