aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-03-31drm/amd/display: Fix pointer dereferenced before checkingHaowen Bai1-1/+1
The pointer edid_buf is dereferencing pointer edid before edid is being null checked. Fix this by assigning edid->raw_edid to edid_buf only if edid is not NULL, otherwise just NULL. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Fix allocate_mst_payload assert on resumeRoman Li1-1/+2
[Why] On resume we do link detection for all non-MST connectors. MST is handled separately. However the condition for telling if connector is on mst branch is not enough for mst hub case. Link detection for mst branch link leads to mst topology reset. That causes assert in dc_link_allocate_mst_payload() [How] Use link type as indicator for mst link. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: 3.2.179Aric Cyr1-1/+1
- [FW Promotion] Release 0.0.110.0 - Revert FEC check in validation - Update LTTPR UHBR link rate support struct - Add support for USBC connector - Add work around for AUX failure on wake - Clear optc false state when disable otg - Enable power gating before init_pipes - Remove redundant dsc power gating from init_hw - Power down hardware if timer not trigger - Correct Slice reset calculation - Enable 3-plane MPO for DCN31 - Set fec register init value - Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fix - Create underflow interrupt IRQ type Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: [FW Promotion] Release 0.0.110.0Anthony Koo1-86/+4
- Revert save/restore PANEL_PWRSEQ_REF_DIV2 and other psr phy optimizations Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Revert FEC check in validationMartin Leung1-4/+0
why and how: causes failure on install on certain machines Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Update LTTPR UHBR link rate support structMichael Strauss1-1/+1
[WHY] Update field order to match DP2.0 spec SCR Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Add support for USBC connectorSamson Tam4-3/+12
[Why] Add support for CONNECTOR_ID_USBC Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Add work around for AUX failure on wake.Jimmy Kizito2-0/+60
[Why] When waking from low-power states, a DP sink may remain unresponsive to AUX transactions. [How] Try to toggle DPCD SET_POWER register repeatedly (up to a maximum timeout value) until DP sink becomes responsive. Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Clear optc false state when disable otgCharlene Liu2-8/+11
[why] when disable optc, need to clear the underflow status as well. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Enable power gating before init_pipesRoman Li3-6/+9
[Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Remove redundant dsc power gating from init_hwRoman Li1-7/+0
[Why] DSC Power down code has been moved from dcn31_init_hw into init_pipes() Need to remove it from dcn10_init_hw() as well to avoid duplicated action on dcn1.x/2.x [How] Remove DSC power down code from dcn10_init_hw() Fixes: 8fa6f4c5715c ("drm/amd/display: fixed the DSC power off sequence during Driver PnP") Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Power down hardware if timer not triggerPaul Hsieh1-1/+25
[WHY] In headless systems, if SetMode/Power down timer is not called, hardware will not be powered down causing HW/SW discrepancies. Powering down hardware on SetPowerState to D3 will ensure SW/HW state is accurate. [HOW] If PowerDownThread timer is not trigger but OS call SetPowerState to D3, power down hardware. Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Correct Slice reset calculationChris Park1-2/+2
[Why] Once DSC slice cannot fit pixel clock, we incorrectly reset min slices to 0 and allow max slice to operate, even when max slice itself cannot fit the pixel clock properly. [How] Change the sequence such that we correctly determine DSC is not possible when both min slices and max slices cannot fit pixel clock per slice. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chris Park <Chris.Park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Enable 3-plane MPO for DCN31Krunoslav Kovac1-3/+3
[WHY&HOW] It can be enabled by users, but proper way is to report max_slave_planes in DC caps for each ASIC. Some structures use hardcoded max_plane=2, this is also addressed here. Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Set fec register init valueJingwen Zhu3-16/+22
[Why] We don't include this eDP FEC init on fastboot. [How] Set the fec to init value when stopping driver &get the fec register value to check should enable FEC. Co-authored-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fixOliver Logush2-4/+2
[why] W/a no longer needed Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Create underflow interrupt IRQ typeAngus Wang1-0/+1
[WHY] We want another entry in IRQ type that can be used to help find the underflow interrupt source. [HOW] Added another mapping in IRQ type enum. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Angus Wang <Angus.Wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu: Re-classify some log messages in commit pathSean Paul1-4/+4
ATOMIC and DRIVER log categories do not typically contain per-frame log messages. This patch re-classifies some messages in amd to chattier categories to keep ATOMIC/DRIVER quiet. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folderMelissa Wen5-256/+235
Moves FPU-related structs and dcn316_update_bw_bounding_box from dcn316 driver to dml/dcn31 that centralize FPU operations for DCN 3.1x Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folderMelissa Wen5-257/+235
Moves related structs and dcn315_update_bw_bounding_box from dcn315 driver code to dml/dcn31_fpu that centralizes FPU code for DCN 3.1x. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folderMelissa Wen6-381/+451
Creates FPU files in dml/dcn31 folder to centralize FPU operations from 3.1x drivers and moves all FPU-associated code from dcn31 driver to there. It includes the struct _vcs_dpi_ip_params_st and _vcs_dpi_soc_bounding_box_st and functions: - dcn31_calculate_wm_and_dlg_fp() - dcn31_update_bw_bounding_box() adding dc_assert_fp_enabled to them and drop DC_FP_START/END inside functions that was moved to dml folder, as required. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: 3.2.178Aric Cyr1-1/+1
This version brings along following fixes: - HDCP SEND AKI INIT error - fix audio format not updated after edid updated - Reduce stack size - FEC check in timing validation - Add fSMC_MSG_SetDtbClk support - Update VTEM Infopacket definition - [FW Promotion] Release 0.0.109.0 Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: [FW Promotion] Release 0.0.109.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Fix HDCP SEND AKI INIT errorAhmad Othman3-2/+46
[why] HDCP sends AKI INIT error in case of multiple display on dock [how] Add new checks and method to handle display adjustment for multiple display cases Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ahmad Othman <ahmad.othman@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: remove destructive verify link for TMDSCharlene Liu1-2/+1
[why and how] TMDS does not need destructive verify link Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Add support for zstate during extended vblankGabe Teeger10-4/+80
[why] When we enter FREESYNC_STATE_VIDEO, we want to use the extra vblank portion to enter zstate if possible. [how] When we enter freesync, a full update is triggered and the new vtotal with extra lines is passed to dml in a stream update. The time gained from extra vblank lines is calculated in microseconds. We allow zstate entry if the time gained is greater than 5 ms, which is the current policy. Furthermore, an optimized value for min_dst_y_next_start is calculated and written to its register. When exiting freesync, another full update is triggered and default values are restored. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Update VTEM Infopacket definitionLeo (Hanghong) Ma1-2/+3
[Why & How] The latest HDMI SPEC has updated the VTEM packet structure, so change the VTEM Infopacket defined in the driver side to align with the SPEC. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Add fSMC_MSG_SetDtbClk supportOliver Logush2-5/+18
[why] Needed to support dcn315 Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: FEC check in timing validationChiawen Huang1-0/+4
[Why] disable/enable leads FEC mismatch between hw/sw FEC state. [How] check FEC status to fastboot on/off. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Reduce stack sizeRodrigo Siqueira1-1/+7
Linux kernel enabled more compilation restrictions related to the stack size, which caused compilation failures in our code. This commit reduces the allocation size by allocating the required memory dynamically. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: fix audio format not updated after edid updatedCharlene Liu1-2/+2
[why] for the case edid change only changed audio format. driver still need to update stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Fix p-state allow debug index on dcn31Nicholas Kazlauskas1-0/+2
[Why] It changed since dcn30 but the hubbub31 constructor hasn't been modified to reflect this. [How] Update the value in the constructor to 0x6 so we're checking the right bits for p-state allow. It worked before by accident, but can falsely assert 0 depending on HW state transitions. The most frequent of which appears to be when all pipes turn off during IGT tests. Cc: Harry Wentland <harry.wentland@amd.com> Fixes: e7031d8258f1b4 ("drm/amd/display: Add pstate verification and recovery for DCN31") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amdgpu: Use drm_mode_copy()Ville Syrjälä1-3/+3
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amdgpu: Remove pointless on stack mode copiesVille Syrjälä1-17/+17
These on stack copies of the modes appear to be pointless. Just look at the originals directly. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: Nikola Cornij <nikola.cornij@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amdgpu/dc: fix typos in commentsJulia Lawall1-3/+3
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: 3.2.177Aric Cyr1-1/+1
This version brings along following fixes: - Added I2C escape to support query exist - Functionality to get pipe from stream context - debugfs entry fixes - Block zstate when more than one plane enabled - Update to engine ddc - Reading lante status during LT fixes - Null point filters - [FW Promotion] Release 0.0.108.0 Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: [FW Promotion] Release 0.0.108.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2Charlene Liu3-3/+91
[why] DCN31 has this in zstate save/restore sequence. need for non_zstate supported ASIC [how] add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Wait for hubp read line for PollockBecle Lee6-0/+46
[Why] Underflow occurred while hubp ret pipe read is idle and the second pipe is powered up and added. Flickering and underflow are only observed on Pollock. [How] Check the hubp ret pipe read prior to unlock pipes. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Becle Lee <becle.lee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add null pointer filterJing Zhou1-2/+4
[Why & How] Add null pointer filter for logical integrity. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Retry when fail reading lane status during LTWayne Lin1-11/+19
[Why] In dp_get_lane_status_and_lane_adjust(), we call core_link_read_dpcd() to get lane status but we ignore the return value of the function. If there is problem with AUX and we eventually can only get partial data from monitor, we might misuse the data to jude the link training result. Which could have us trapped in the dc_link_dp_perform_link_training() since we thought that we can still give a try on another link setting. [How] In dp_get_lane_status_and_lane_adjust(), take return value of core_link_read_dpcd() into account. If we fail to read all requested data, we treat lanes status as previous one and repeat LT steps again. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add new enum for EDID statusDale Zhao2-0/+4
[Why] We must support a new type of partial edid return in the future [How] Add interface and case hander for partial edid Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Block zstate when more than one plane enabledEric Yang1-6/+10
[Why] Currently Z10 save/restore only covers 1 plane case. If we enter Z10 with 2 planes enabled, 1 of the 2 planes will not be restored. causing black screen. [How] Disable Zstate when more than 1 plane is enabled. Right now Z9 enable but Z10 disable is not a supported config, so we disable both. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Update engine ddcJing Zhou1-0/+1
[Why] Crash caused by a ddc update failure [How] Update engine ddc before release engine. Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Fix a few parts in debugfs entryWayne Lin1-1/+9
[Why & How] 1. To leverage and simplify the igt tool. Change the value of retrain when calling preferred training settings. Now, writing value to link settings triggers link training immediately. 2. Add dc lock when triggering link training in edp_ilr_write() Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add function to get the pipe from the stream contextLeo (Hanghong) Ma2-0/+16
[Why] We need a helper function in dc to grab the pipe from the stream context. [How] Add it. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add I2C escape to support query device exist.JinZe.Xu4-0/+50
[How] 1. Search OEM I2C info from BIOS and compare with input parameter. 2. If BIOS doesn't record it, just try to read one byte. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amdgpu/display: enable scatter/gather display for DCN 3.1.6Alex Deucher1-0/+1
Enable scatter/gather display for DCN 3.1.6. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add pstate verification and recovery for DCN31Nicholas Kazlauskas7-4/+73
[Why] To debug when p-state is being blocked and avoid PMFW hangs when it does occur. [How] Re-use the DCN10 hardware sequencer by adding a new interface for verifying p-state high on the hubbub. The interface is mostly the same as the DCN10 interface, but the bit definitions have changed for the debug bus. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: fix dp kvm can't light upTianci.Yin1-0/+1
[why] The DP KVM failed to light up, since the lttpr_mode is not reset to default value when failed to read LTTPR capabilities, and the variable max_link_rate retains a initial value zero, this cause variable link_rate be assigned to an error value zero, consquently pixel_clock get wrong value zero, and kvm can't light up. [how] Reset lttpr_mode to default value when failed to read LTTPR capabilities, so that the link_rate fallbacks to the minimum rate that supported by link encoder and sink. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.