aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2022-02-23drm/amd/display: Refactor fixed VS logic for non-transparent modeGeorge Shen1-5/+97
[Why] All fixed VS/PE link training sequence should be refactored into a separate function outside of the standard link training sequence. This includes the sequence for non-transparent mode. [How] Isolate link training sequence for fixed VS/PE non-transparent mode into a separate function. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: add cable ID support for usb c connectorWenjing Liu7-41/+117
[how] Call to DMUB to retrieve usb c cable ID data from PD firmware. If cable id is retrieved from DMUB, skip reading cable ID from RX. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: clear remote dc_sink when stop mstWayne Lin1-1/+19
[Why] Currently, we don't have code path to release remote dc_sink when unplug MST hub from the system. After few times hotplug, we hit the limition of maximum number of remote dc_sink and can't light up new connected monitor anymore. [How] Releasing all remote dc_sink at dm_helpers_dp_mst_stop_top_mgr() was removed by previous patch. Restore it. Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Ignore Transitional Invalid Link Rate Error MessageFangzhi Zuo1-1/+1
[Why] When hotplug or unplug happens, each stream disabled one by one, and then enable any alived streams. Link phy and payload table is cleared when 1st stream is disabled. That causes the error message pops up when disable 2nd stream. There is no active stream after link_rate is cleared. After all streams are disabled, link will be trained again and link rate is assigned to any alived streams. Therefore there is no harm for the error message that represents invalid link rate value in the atomic reset transitional time period. [How] Downgrade the log level from ERROR to DEBUG. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Fix wrong resolution with DP/VGA adapterIlya2-0/+19
[Why] Hotplugging the VGA side of some DP/VGA adapters caused the display to light up with the wrong (non-native) resolution. This is caused by the adapter misbehaving by reporting the wrong number of downstream ports when the VGA side is unplugged (reports 1 instead of 0), but only if the SINK_COUNT DPCD register is read more than once. [How] To work around the adapter behavior, remove the sink if link is detected, but EDID cannot be read. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Ilya <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Refactor PSR DPCD caps detectionPo Ting Chen6-57/+69
[Why] To move the PSR DPCD caps detection into detect_edp_sink_caps() Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Po Ting Chen <robin.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Set compbuf size to min at prep prevent overbook crbDuncan Ma2-2/+11
[Why] Detbuffer size is dynamically set for dcn31x. At certain moment, compbuf+(def size * num pipes) > config return buffer size causing flickering. This is easily reproducible when MPO is enabled with two displays. [How] At prepare BW, use the min comp buffer size. When it is to optimize BW, set compbuf size back to maximum possible size. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Duncan Ma <duncanma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: lock/un-lock cursor if odm pipe split usedPaul Hsieh1-1/+6
[Why] When system resume from sleep, the cursor lock will be reset to default(lock status). And the cursor programming sequence doesn't consider about odm pipe split cause cursor can't be enabled. [How] If odm pipe split has been used, lock/un-lock on each pipes. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Turn global functions into static functionsMaíra Canal7-8/+9
Turn previously global functions into static functions to avoid -Wmissing-prototype warnings, such as: drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn30/irq_service_dcn30.c:50:20: warning: no previous prototype for function 'to_dal_irq_source_dcn30' [-Wmissing-prototypes] enum dc_irq_source to_dal_irq_source_dcn30( ^ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn30/irq_service_dcn30.c:50:1: note: declare 'static' if the function is not intended to be used outside of this translation unit enum dc_irq_source to_dal_irq_source_dcn30( ^ static 1 warning generated. drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c:488:6: warning: no previous prototype for function 'dcn316_clk_mgr_helper_populate_bw_params' [-Wmissing-prototypes] void dcn316_clk_mgr_helper_populate_bw_params( ^ drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c:488:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void dcn316_clk_mgr_helper_populate_bw_params( ^ static 1 warning generated. v2: drop is_timing_changed hunk (Alex) Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Add missing prototypes to dcn201_initMaíra Canal1-0/+1
Include the header with the prototype to silence the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn201/dcn201_init.c:127:6: warning: no previous prototype for function 'dcn201_hw_sequencer_construct' [-Wmissing-prototypes] void dcn201_hw_sequencer_construct(struct dc *dc) ^ Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove unused variableMaíra Canal1-3/+0
Remove the variable clamshell_closed from the function dcn10_align_pixel_clocks. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2063:7: warning: variable 'clamshell_closed' set but not used [-Wunused-but-set-variable] bool clamshell_closed = false; ^ Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove unused dmub_outbox_irq_info_funcs variableMaíra Canal1-5/+0
Remove the unused struct irq_source_info_funcs dmub_outbox_irq_info_funcs from the file, which was declared but never hooked up. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn201/irq_service_dcn201.c:141:43: warning: unused variable 'dmub_outbox_irq_info_funcs' [-Wunused-const-variable] static const struct irq_source_info_funcs dmub_outbox_irq_info_funcs = { ^ Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove vupdate_int_entry definitionMaíra Canal1-14/+0
Remove the vupdate_int_entry definition and utilization to avoid the following warning by Clang: drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:410:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(0), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:404:2: note: previous initialization is here vupdate_int_entry(0), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:411:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(1), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:405:2: note: previous initialization is here vupdate_int_entry(1), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:412:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(2), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:406:2: note: previous initialization is here vupdate_int_entry(2), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:413:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(3), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:407:2: note: previous initialization is here vupdate_int_entry(3), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:414:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(4), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:408:2: note: previous initialization is here vupdate_int_entry(4), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:415:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(5), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:409:2: note: previous initialization is here vupdate_int_entry(5), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ 6 warnings generated. Fixes: 688f97ed3f5e ("drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1") Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove unused dcn316_smu_set_voltage_via_phyclk functionMaíra Canal1-16/+0
Remove dcn316_smu_set_voltage_via_phyclk function, which is not used in the codebase. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn316/dcn316_smu.c:171:5: warning: no previous prototype for function 'dcn316_smu_set_voltage_via_phyclk' [-Wmissing-prototypes] int dcn316_smu_set_voltage_via_phyclk(struct clk_mgr_internal *clk_mgr, int requested_phyclk_khz) ^ Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove unused temp variableMaíra Canal1-0/+4
Remove unused temp variable from the dmub_rb_flush_pending function by using arithmetic to remove the loop. The -Wunused-but-set-variable warning was pointed out by Clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dmub/inc/dmub_cmd.h:2921:12: warning: variable 'temp' set but not used [-Wunused-but-set-variable] uint64_t temp; ^ v2: squash in revert and comment update (Alex) Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amdgpu: derive GTT display support from DMAlex Deucher1-0/+8
Rather than duplicating the logic in two places, consolidate the logic in the display manager. Acked-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amdgpu/display: split dmcu and gpuvm handling logicAlex Deucher1-15/+20
Separate the logic for each of these features to make the code easier to understand and update in the future. Acked-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 DM SupportQingqing Zhuo2-1/+14
Add display manager support for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 COREQingqing Zhuo2-3/+18
DC core changes for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 blocks to MakefileQingqing Zhuo1-0/+1
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 Command Table HelperQingqing Zhuo1-0/+1
Add vbios table support for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 ResourceQingqing Zhuo3-0/+2400
Add display resource management for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 DMUBQingqing Zhuo5-5/+139
Add support for the DMUB firmware for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 IRQQingqing Zhuo3-0/+480
Add irq interfaces for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 GPIOQingqing Zhuo7-0/+714
Add GPIO interfaces for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 CLK_MGRQingqing Zhuo6-2/+1141
Clk and SMU interfaces for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 family informationQingqing Zhuo2-0/+7
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-17drm/amd/display: Add DCN316 resource and SMU clock managerHansen Dsouza11-3/+3647
Add core DC implementation for DCN316. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-17drm/amd/display: Add DMUB support for DCN316Leo Li6-1/+103
Initialize DMUB for DCN316. Use same funcs as DCN31 for DCN316. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-17drm/amd/display: configure dc hw resource for DCN 3.1.6Prike Liang9-4/+31
- set DC version - add construct/destroy dc clock management function - register dcn interrupt handler Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: For vblank_disable_immediate, check PSR is really usedMichel Dänzer1-8/+9
Even if PSR is allowed for a present GPU, there might be no eDP link which supports PSR. Fixes: 708978487304 ("drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabled") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: Add dsc pre-validation in atomic checkRoman Li5-16/+229
[Why] The previous change: "Add affected crtcs to atomic state for dsc mst unplug" forces modeset on all added crctc regardless whether timing changed or not. Per our implementation of dsc we need modeset only if timing changed. Otherwise dsc can be programmed incorrectly leading to dsc engine hang. [How] During atomic_check pre-compute dsc params. Only set mode_changed if timing is changed. Reviewed-by: Hersen Wu <hersenwu@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: add dsc mst stream pbn log for debugHersen Wu4-0/+52
[why] payload and slot number of display on dsc mst hub will be adjusted when there is change on any display on dsc hub. to monitor dsc enable/disable, pbn change, we need add log. [How] add mst_pbn to dc_dsc_config of dc_crtc_timing. add dsc, pbn, display name within dc_core_enable_stream, dc_core_disable_stream, dc_stream_log Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: 3.2.173Aric Cyr1-1/+1
This version brings along the following fixes: -Fixes bugs for dsc mst hub -Enables 29 denial itnerface by default -Fixes dmub outbox notificatoin Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: [FW Promotion] Release 0.0.104.0Anthony Koo1-2/+2
Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: Add affected crtcs to atomic state for dsc mst unplugRoman Li1-2/+5
[Why] When display topology changed on DSC hub we add all crtcs with dsc support to atomic state. Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors" However the original implementation may skip crtc if the topology change caused by unplug. That potentially could lead to no-lightup or corruption on DSC hub after unplug event on one of the connectors. [How] Update add_affected_mst_dsc_crtcs() to use old connector state if new connector state has no crtc (undergoes modeset due to unplug) Fixes: 44be939ff7ac58 ("drm/amd/display: Trigger modesets on MST DSC connectors") Reviewed-by: Hersen Wu <hersenwu@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: enable z9 denial interface by defaultEric Yang1-1/+1
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: make sure pipe power gating reach requested hw stateCharlene Liu1-3/+18
[why] display mapping change will involved pipe power gating on and off. when doing this too fase, sometimes usbc will have no display. check HW status, it is still in pipe power gating. [how] insert polling HW status to make sure the required state reached. also add dal registry key handling. Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: dsc mst re-compute pbn for changes on hubHersen Wu1-8/+45
[why] when unplug 1 dp from dsc mst hub, atomic_check new request dc_state only include info for the unplug dp. this will not trigger re-compute pbn for displays still connected to hub. [how] all displays connected to dsc hub are available in dc->current_state, by comparing dc->current_state and new request from atomic_chceck, it will provide info of displays connected to hub and do pbn re-compute. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: Fix for dmub outbox notification enableMeenakshikumar Somasundaram6-24/+80
[Why] Currently driver enables dmub outbox notification before oubox ISR is registered. During boot scenario, sometimes dmub issues hpd outbox message before driver registers ISR and those messages are missed. [How] Enable dmub outbox notification after outbox ISR is registered. Also, restructured outbox enable code to call from dm layer and renamed APIs. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: Protect update_bw_bounding_box FPU code.Bas Nieuwenhuizen2-2/+7
For DCN3/3.01/3.02 at least these use the fpu. v2: squash in build fix for when DCN is not enabled (Leo) Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-14drm/amd/display: reset lane settings after each PHY repeater LTSung Joon Kim1-5/+10
[why] In LTTPR non-transparent mode, we need to reset the cached lane settings before performing link training on the next PHY repeater. Otherwise, the cached lane settings will be used for the next clock recovery e.g. VS = MAX (3) which should not be the case according to the DP specs. We expect to use minimum lane settings on each clock recovery sequence. [how] Reset DPCD and HW lane settings on each repeater LT. Set training pattern to 0 for the repeater that failed LT at the proper place. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-14Merge tag 'amd-drm-next-5.18-2022-02-11-1' of https://gitlab.freedesktop.org/agd5f/linux into drm-nextDave Airlie116-3162/+3524
amd-drm-next-5.18-2022-02-11-1: amdgpu: - Clean up of power management code - Enable freesync video mode by default - Clean up of RAS code - Improve VRAM access for debug using SDMA - Coding style cleanups - SR-IOV fixes - More display FP reorg - TLB flush fixes for Arcuturus, Vega20 - Misc display fixes - Rework special register access methods for SR-IOV - DP2 fixes - DP tunneling fixes - DSC fixes - More IP discovery cleanups - Misc RAS fixes - Enable both SMU i2c buses where applicable - s2idle improvements - DPCS header cleanup - Add new CAP firmware support for SR-IOV amdkfd: - Misc cleanups - SVM fixes - CRIU support - Clean up MQD manager UAPI: - Add interface to amdgpu CTX ioctl to request a stable power state for profiling https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207 - Add amdkfd support for CRIU https://github.com/checkpoint-restore/criu/pull/1709 - Remove old unused amdkfd debugger interface Was only implemented for Kaveri and was only ever used by an old HSA tool that was never open sourced radeon: - Fix error handling in radeon_driver_open_kms - UVD suspend fix - Misc fixes From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211220706.5803-1-alexander.deucher@amd.com
2022-02-11drm/amd/display: extend dcn201 supportOliver Logush2-1/+2
Signed-off-by: Oliver Logush <ollogush@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amdgpu: move dpcs_3_0_3 headers from dcn to dpcsAlex Deucher1-2/+2
To align with other headers. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amdgpu: move dpcs_3_0_0 headers from dcn to dpcsAlex Deucher7-14/+14
To align with other headers. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amdgpu/display: change pipe policy for DCN 2.0Alex Deucher1-1/+1
Fixes hangs on driver load with multiple displays on DCN 2.0 parts. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215511 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1877 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1886 Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amd/display: handle null link encoderMartin Tsai2-31/+5
[Why] The link encoder mapping could return a null one and causes system crash. [How] Let the mapping can get an available link encoder without endpoint identification check. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Martin Tsai <martin.tsai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amd/display: 3.2.172Aric Cyr1-1/+1
This version brings along the following fixes: -fix for build failure uninitalized error -Bug fix for DP2 using uncertified cable -limit unbounded request to 5k -fix DP LT sequence on EQ fail -Bug fixes for S3/S4 Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amd/display: [FW Promotion] Release 0.0.103.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.