aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2021-10-05drm/amd/display: USB4 bring up set correct addressJude Shih1-1/+1
[Why] YELLOW_CARP_B0 address was not correct [How] Set YELLOW_CARP_B0 to 0x1A. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Jude Shih <shenshih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-05drm/amd/display: Fix DCN3 B0 DP Alt MappingLiu, Zhan1-0/+6
[Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit 4b7786d87fb3adf3e534c4f1e4f824d8700b786b)
2021-10-05drm/amd/display: Fix B0 USB-C DP Alt modeLiu, Zhan3-2/+43
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit bdd1a21b52557ea8f61d0a5dc2f77151b576eb70)
2021-10-04drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SIAlex Deucher1-0/+2
Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: Prevent using DMUB rptr that is out-of-boundsWyatt Wood2-2/+9
[Why] Running into bugchecks during stress test where rptr is 0xFFFFFFFF. Typically this is caused by a hard hang, and can come from HW outside of DCN. [How] To prevent bugchecks when writing the DMUB rptr, fist check that the rptr is valid. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu/display: fold DRM_AMD_DC_DCN201 into DRM_AMD_DC_DCNAlex Deucher6-19/+0
No need for a separate kconfig option at this point. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu: convert IP version array to include instancesAlex Deucher1-13/+13
Allow us to query instances versions more cleanly. Instancing support is not consistent unfortunately. SDMA is a good example. Sienna cichlid has 4 total SDMA instances, each enumerated separately (HWIDs 42, 43, 68, 69). Arcturus has 8 total SDMA instances, but they are enumerated as multiple instances of the same HWIDs (4x HWID 42, 4x HWID 43). UMC is another example. On most chips there are multiple instances with the same HWID. This allows us to support both forms. v2: rebase v3: clarify instancing support Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: fix error case handlingGuchun Chen1-6/+8
Otherwise, we will run into error case path. v2: fix build when CONFIG_DRM_AMD_DC_DCN is not set Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu/display/dm: convert RAVEN to IP version checkingAlex Deucher1-16/+6
Use IP versions rather than asic_type to differentiate IP version specific features. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu/display/dm: convert to IP version checkingAlex Deucher1-94/+114
Use IP versions rather than asic_type to differentiate IP version specific features. v2: drop unrelated change Acked-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: Only define DP 2.0 symbols if not already definedHarry Wentland2-5/+50
[Why] For some reason we're defining DP 2.0 definitions inside our driver. Now that patches to introduce relevant definitions are slated to be merged into drm-next this is causing conflicts. In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c:33: In file included from ./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:70: In file included from ./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu_mode.h:36: ./include/drm/drm_dp_helper.h:1322:9: error: 'DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER' macro redefined [-Werror,-Wmacro-redefined] ^ ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dp_types.h:881:9: note: previous definition is here ^ 1 error generated. [How] Guard all display driver defines with #ifndef for now. Once we pull in the new definitions into amd-staging-drm-next we will follow up and drop definitions from our driver and provide follow-up header updates for any addition DP 2.0 definitions required by our driver. We also ensure drm_dp_helper.h is included before dc_dp_types.h. v3: Ensure drm_dp_helper.h is included before dc_dp_types.h v2: Add one missing endif Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: add cyan_skillfish display supportZhan Liu49-2/+4958
[Why] add display related cyan_skillfish files in. makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag. v2: squash in clang fixes from Harry, Nathan v3: squash in missing CONFIG_DRM_AMD_DC check (Alex) Signed-off-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Jun Lei <jun.lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29gpu: amd: replace open-coded offsetof() with builtinArnd Bergmann1-3/+1
The two AMD drivers have their own custom offsetof() implementation that now triggers a warning with recent versions of clang: drivers/gpu/drm/radeon/radeon_atombios.c:133:14: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] Change all the instances to use the normal offsetof() provided by the kernel that does not have this problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29drm/amd/display: Pass PCI deviceid into DCCharlene Liu1-0/+1
[why] pci deviceid not passed to dal dc, without proper break, dcn2.x falls into dcn3.x code path [how] pass in pci deviceid, and break once dal_version initialized. Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29drm/amd/display: Update VCP X.Y logging to improve usefulnessGeorge Shen1-24/+25
[Why] Recently debugging efforts have involved setting/checking the X.Y value used during payload allocation. Current output for Y was calculated with incorrect bitshift. Y value is also not human readable. [How] Refactor logging into separate function. Fix Y calculation error and format output to be human readable. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29drm/amd/display: Handle Y carry-over in VCP X.Y calculationGeorge Shen1-0/+6
[Why/How] Theoretically rare corner case where ceil(Y) results in rounding up to an integer. If this happens, the 1 should be carried over to the X value. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29drm/amd/display: make verified link cap not exceeding max link capWenjing Liu1-15/+28
[why] There is a chance verified link cap can be greater than max link cap. This causes software hang because we cannot power up PHY with link rate that cannot handle. The change is to guard verfieid link cap from becoming larger than max link cap our PHy can support. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29drm/amd/display: initialize backlight_ramping_override to falseJosip Pavic1-0/+1
[Why] Stack variable params.backlight_ramping_override is uninitialized, so it contains junk data [How] Initialize the variable to false Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29drm/amd/display: Defer LUT memory powerdown until LUT bypass latchesMichael Strauss4-7/+87
[WHY] Blnd, 3dlut, and shaper LUT select registers are double buffered, however their accompanying LUT memory shutdown registers are not. As a result, shutting down LUT memory immediately after setting a block to bypass causes corruption as bypass only happens at next Vupdate. [HOW] Re-enable mem low power for CM block Force optimization on next flip and disable LUT memory during optimization sequence if LUT select field is then set to bypass v2: squash in CONFIG_DRM_AMD_DC_DCN fix (Alex) Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Pass PCI deviceid into DCCharlene Liu1-0/+1
[why] pci deviceid not passed to dal dc, without proper break, dcn2.x falls into dcn3.x code path [how] pass in pci deviceid, and break once dal_version initialized. Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-28drm/amd/display: initialize backlight_ramping_override to falseJosip Pavic1-0/+1
[Why] Stack variable params.backlight_ramping_override is uninitialized, so it contains junk data [How] Initialize the variable to false Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-28drm/amd/display: Fix Display Flicker on embedded panelsPraful Swarnakar1-8/+7
[Why] ASSR is dependent on Signed PSP Verstage to enable Content Protection for eDP panels. Unsigned PSP verstage is used during development phase causing ASSR to FAIL. As a result, link training is performed with DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for eDP panels that causes display flicker on some panels. [How] - Do not change panel mode, if ASSR is disabled - Just report and continue to perform eDP link training with right settings further. Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-28drm/amd/display: Replace referral of dal with dcQingqing Zhuo6-6/+6
[Why] DC should be used in place of DAL in upstream. [How] Replace dal with dc in function names. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: 3.2.155Aric Cyr1-1/+1
This version brings along following fixes: - Fixes to backlight, LUT, PPS, MST - Use correct vpg for 128b/132b encoding - Improved logging for VCP - Replace referral of dal with dc Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: [FW Promotion] Release 0.0.86Anthony Koo1-2/+2
Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Add an extra check for dcn10 OPTC data formatOliver Logush3-8/+1
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Add PPS immediate update flag for DCN2Ilya2-3/+11
[Why] This change is needed for DCN2 to make use of the immediate_update flag. With this flag, update to PPS will be immediate, rather than always taking place on dig_update signal. [How] Set AFMT_GENERIC7_FRAME/IMMEDIATE_UPDATE bits depending on flag value. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Ilya <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Fix MST link encoder availability check.Jimmy Kizito1-5/+18
[Why] MST streams share the same link and should share the same encoder. The current availability check may erroneously determine that an encoder is unavailable for MST streams. [How] When checking for link encoder availability, check if an encoder in use shares a link with the stream for which the availability check is being conducted. If the link is shared, then the link encoder should be shared too and will be deemed available. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Fix for link encoder access for MST.Meenakshikumar Somasundaram1-2/+16
[Why] Link encoder in the link could be null for certain links. [How] If link encoder in the link is null then get the link encoder from the stream. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: add function to convert hw to dpcd lane settingsWenjing Liu2-81/+39
[why] Unify the code which handles the conversion between hw lane setting and dpcd lane setting. v2: squash in unused variable fixes (Alex) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: update cur_lane_setting to an array one for each laneWenjing Liu4-8/+8
[why] To support per lane lane setting adjustment, we need to change cur_lane_setting to an array one for each lane as the first step. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Add debug support to override the Minimum DRAM ClockDavid Galiffi2-0/+5
[Why] Requested feature to assist with Thermal, Acoustic, Power, and Performance tuning. [How] Add a debug field that will override calculated minimum DRAM clock, if the debug value is larger than the calculate value. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: add vsync notify to dmub for abm pauseEric Yang5-0/+132
[Why] To prevent unnecessary wake up of DMCUB when ABM is enabled without PSR enabled, driver will notify DMCUB to stop ABM's vertical interrupts if vsync is disabled and steady state is reached. [How] Send inbox message to notify ABM pause based on vsync on/off Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Don't enable AFMT for DP audio streamMichael Strauss2-7/+0
[WHY] AFMT is unused for DP audio, so powering it on for DP is unnecessary. [HOW] APG block should be powered down instead, however HW defaults to shutdown state when not enabled so no further work is required. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: [FW Promotion] Release 0.0.85Anthony Koo1-2/+2
Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: use correct vpg instance for 128b/132b encodingWenjing Liu1-0/+6
[why] 128b/132b uses the vpg instance assigned to hpo dp stream encoder. The current vpg used is assigned to dio stream encoder. This is incorrect and cause display black screen because the actual vpg is powered off. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Fix Display Flicker on embedded panelsPraful Swarnakar1-8/+7
[Why] ASSR is dependent on Signed PSP Verstage to enable Content Protection for eDP panels. Unsigned PSP verstage is used during development phase causing ASSR to FAIL. As a result, link training is performed with DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for eDP panels that causes display flicker on some panels. [How] - Do not change panel mode, if ASSR is disabled - Just report and continue to perform eDP link training with right settings further. Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28Merge tag 'amd-drm-next-5.16-2021-09-27' of https://gitlab.freedesktop.org/agd5f/linux into drm-nextDave Airlie125-1455/+8878
amd-drm-next-5.16-2021-09-27: amdgpu: - RAS improvements - BACO fixes - Yellow Carp updates - Misc code cleanups - Initial DP 2.0 support - VCN priority handling - Cyan Skillfish updates - Rework IB handling for multimedia engine tests - Backlight fixes - DCN 3.1 power saving improvements - Runtime PM fixes - Modifier support for DCC image stores for gfx 10.3 - Hotplug fixes - Clean up stack related warnings in display code - DP alt mode fixes - Display rework for better handling FP code - Debugfs fixes amdkfd: - SVM fixes - DMA map fixes radeon: - AGP fix From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210927212653.4575-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-09-23drm/amd/display: fix empty debug macrosArnd Bergmann1-2/+2
Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca2309301 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix wrong format specifier in amdgpu_dm.cHayden Goodfellow1-1/+1
[Why] Currently, the 32bit kernel build fails due to an incorrect string format specifier. ARRAY_SIZE() returns size_t type as it uses sizeof(). However, we specify it in a string as %ld. This causes a compiler error and causes the 32bit build to fail. [How] Change the %ld to %zu as size_t (which sizeof() returns) is an unsigned integer data type. We use 'z' to ensure it also works with 64bit build. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hayden Goodfellow <Hayden.Goodfellow@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: 3.2.154Aric Cyr1-1/+1
This new DC version brings improvements in the following areas: - New firmware version - Fix HPD problems on DCN2 - Fix generic encoder problems and null deferences - Adjust DCN301 watermark - Rework dynamic bpp for DCN3x - Improve link training fallback logic Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: [FW Promotion] Release 0.0.84Anthony Koo1-2/+2
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix null pointer dereference for encodersJimmy Kizito2-2/+2
[Why] Links which are dynamically assigned link encoders have their link encoder set to NULL. [How] Check that a pointer to a link_encoder object is non-NULL before using it. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Creating a fw boot options bit for an upcoming featureMeenakshikumar Somasundaram1-1/+2
[Why] Need a bit for x86 driver to enable a FW boot option for an upcoming feature. [How] Added a bit in dmub_fw_boot_options for an upcoming feature. Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: DIG mapping change is causing a blockerLiu, Zhan1-6/+0
[Why] DIG mapping change is causing a blocker [How] Revert the change for now. We will re-implement it later. Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix B0 USB-C DP Alt modeLiu, Zhan3-2/+43
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Disable mem low power for CM HW block on DCN3.1Michael Strauss1-1/+1
[WHY] Currently causes visible flicker in some scenarios on OLED eDPs Reviewed-by: Haonan Wang <haonan.wang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix issue with dynamic bpp change for DCN3xGuo, Bing11-97/+204
Why: Screen sometimes would have artifacts or blink once at the time when bpp is dynamically changed. How: 1. Changed to update PPS infopacket in frame mode instead of immediate mode since other updates for bpp change are double-buffered. 2. Changed double-buffering enablement programming for DCN30 as advised by ASIC team Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Use adjusted DCN301 watermarksNikola Cornij2-3/+97
[why] If DCN30 watermark calc is used for DCN301, the calculated values are wrong due to the data structure mismatch between DCN30 and DCN301. However, using the original DCN301 watermark values causes underflow. [how] - Add DCN21-style watermark calculations - Adjust DCN301 watermark values to remove the underflow Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Added power down on boot for DCN3Lai, Derek1-0/+2
[Why] The change of setting a timer callback on boot for 10 seconds is still working, just lost power down on boot and power down for DCN3. [How] Added power down on boot and power down for DCN3. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Derek Lai <Derek.Lai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.