aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2021-09-23drm/amd/display: Fix dynamic encoder reassignmentJimmy Kizito13-88/+215
[Why] Incorrect encoder assignments were being used while applying a new state to hardware. (1) When committing a new state to hardware requires resetting the back-end, the encoder assignments of the current or old state should be used when disabling the back-end; and the encoder assignments for the next or new state should be used when re-enabling the back-end. (2) Link training on hot plug could take over an encoder already in use by another stream without first disabling it. [How] (1) Introduce a resource context 'link_enc_cfg_context' which includes: - a mode to indicate when transitioning from current to next state. - transient encoder assignments to use during this state transition. Update the encoder configuration interface to respond to queries about encoder assignment based on the mode of operation. (2) Check if an encoder is already in use before attempting to perform link training on hot plug. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix concurrent dynamic encoder assignmentJimmy Kizito5-75/+258
[Why] Trying to enable multiple displays simultaneously exposed shortcomings with the algorithm for dynamic link encoder assignment. The main problems were: - Assuming stream order remained constant across states would sometimes lead to invalid DIG encoder assignment. - Incorrect logic for deciding whether or not a DIG could support a stream would also sometimes lead to invalid DIG encoder assignment. - Changes in encoder assignment were wholesale while updating of the pipe backend is incremental. This would lead to the hardware state not matching the software state even with valid encoder assignments. [How] The following changes fix the identified problems. - Use stream pointer rather than stream index to track streams across states. - Fix DIG compatibility check by examining the link signal type rather than the stream signal type. - Modify assignment algorithm to make incremental updates so software and hardware states remain coherent. Additionally: - Add assertions and an encoder assignment validation function link_enc_cfg_validate() to detect potential problems with encoder assignment closer to their root cause. - Reduce the frequency with which the assignment algorithm is executed. It should not be necessary for fast state validation. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix link training fallback logicJimmy Kizito1-2/+6
[Why] Link training should fail if stream bandwidth exceeds link bandwidth. [How] Correct fallback logic and use named variables to make intention clear. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix DCN3 B0 DP Alt MappingLiu, Zhan1-0/+6
[Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: 3.2.153Aric Cyr1-1/+1
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: [FW Promotion] Release 0.0.83Anthony Koo1-2/+2
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Extend w/a for hard hang on HPD to dcn20Qingqing Zhuo3-1/+38
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans under 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enablement, causing DMUB to access an irresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off when there is any HPD status in connected state for dcn20. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Reduce stack size for dml21_ModeSupportAndSystemConfigurationFullHarry Wentland1-113/+123
[Why & How] With Werror enabled in the kernel we were failing the clang build since dml21_ModeSupportAndSystemConfigurationFull's stack frame is 1064 when building with clang, and exceeding the default 1024 stack frame limit. The culprit seems to be the Pipe struct, so pull the relevant block out into its own sub-function. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Allocate structs needed by dcn_bw_calc_rq_dlg_ttu in pipe_ctxHarry Wentland2-27/+33
[Why & How] dcn_bw_calc_rq_dlg_ttu uses a stack frame great than 1024. To solve this we could allocate the rq_param, dlg_sys_param, and input structs dynamically. Since this function is inside a kernel_fpu_begin()/end() call we want to avoid memory allocation. Instead it's much safer to pre-allocate these on the pipe_ctx. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Fixes: 3fe617ccafd6 ("Enable '-Werror' by default for all kernel builds") Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: amd-gfx@lists.freedesktop.org Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Xinhui Pan <Xinhui.Pan@amd.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: llvm@lists.linux.dev Acked-by: Christian König <christian.koenig@amd.com> Build-tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix rest of pass-by-value structs in DMLHarry Wentland8-330/+330
Passing structs adds a lot of overhead. We don't ever want to pass anything bigger than primitives by value. This patch fixes these Coverity IDs: Addresses-Coverity-ID: 1424031: ("Big parameter passed by value") Addresses-Coverity-ID: 1424055: ("Big parameter passed by value") Addresses-Coverity-ID: 1424072: ("Big parameter passed by value") Addresses-Coverity-ID: 1423779: ("Big parameter passed by value") Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: amd-gfx@lists.freedesktop.org Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Xinhui Pan <Xinhui.Pan@amd.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: llvm@lists.linux.dev Acked-by: Christian König <christian.koenig@amd.com> Build-tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Pass all structs in display_rq_dlg_helpers by pointerHarry Wentland8-232/+232
Passing structs adds a lot of overhead. We don't ever want to pass anything bigger than primitives by value. This patch fixes these Coverity IDs: Addresses-Coverity-ID: 1423868: ("Big parameter passed by value") Addresses-Coverity-ID: 1423870: ("Big parameter passed by value") Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: amd-gfx@lists.freedesktop.org Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Xinhui Pan <Xinhui.Pan@amd.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: llvm@lists.linux.dev Acked-by: Christian König <christian.koenig@amd.com> Build-tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Pass display_pipe_params_st as const in DMLHarry Wentland12-120/+120
[Why] This neither needs to be on the stack nor passed by value to each function call. In fact, when building with clang it seems to break the Linux's default 1024 byte stack frame limit. [How] We can simply pass this as a const pointer. This patch fixes these Coverity IDs Addresses-Coverity-ID: 1424031: ("Big parameter passed by value") Addresses-Coverity-ID: 1423970: ("Big parameter passed by value") Addresses-Coverity-ID: 1423941: ("Big parameter passed by value") Addresses-Coverity-ID: 1451742: ("Big parameter passed by value") Addresses-Coverity-ID: 1451887: ("Big parameter passed by value") Addresses-Coverity-ID: 1454146: ("Big parameter passed by value") Addresses-Coverity-ID: 1454152: ("Big parameter passed by value") Addresses-Coverity-ID: 1454413: ("Big parameter passed by value") Addresses-Coverity-ID: 1466144: ("Big parameter passed by value") Addresses-Coverity-ID: 1487237: ("Big parameter passed by value") Signed-off-by: Harry Wentland <harry.wentland@amd.com> Fixes: 3fe617ccafd6 ("Enable '-Werror' by default for all kernel builds") Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: amd-gfx@lists.freedesktop.org Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Xinhui Pan <Xinhui.Pan@amd.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: llvm@lists.linux.dev Acked-by: Christian König <christian.koenig@amd.com> Build-tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: fix empty debug macrosArnd Bergmann1-2/+2
Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca2309301 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix crash on device remove/driver unloadAndrey Grodzovsky1-12/+12
Why: DC core is being released from DM before it's referenced from hpd_rx wq destruction code. How: Move hpd_rx destruction before DC core destruction. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Add modifiers capable of DCC image stores for gfx10_3Joshua Ashton1-0/+21
Some games, ie. Doom Eternal, present from compute following compute post-fx and would benefit from having DCC image stores available. DCN on gfx10_3 doesn't need INDEPENDENT_128B_BLOCKS = 0 so we can expose these modifiers capable of DCC image stores. Signed-off-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Handle GFX10_RBPLUS modifiers for dcc_ind_blkJoshua Ashton1-4/+16
Adds the missing logic to set the correct value of dcc_ind_blk for this tiling version. Signed-off-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Use dcc_ind_blk value to set register directlyJoshua Ashton3-8/+7
We don't need to do this workaround if we start setting this value when we fill the plane attributes. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amdgpu/display: add a proper license to dc_link_dp.cAlex Deucher1-1/+23
Was missing. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix white screen page fault for gpuvmNicholas Kazlauskas1-0/+2
[Why] The "base_addr_is_mc_addr" field was added for dcn3.1 support but pa_config was never updated to set it to false. Uninitialized memory causes it to be set to true which results in address mistranslation and white screen. [How] Use memset to ensure all fields are initialized to 0 by default. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23amd/display: enable panel orientation quirksSimon Ser1-0/+28
This patch allows panel orientation quirks from DRM core to be used. They attach a DRM connector property "panel orientation" which indicates in which direction the panel has been mounted. Some machines have the internal screen mounted with a rotation. Since the panel orientation quirks need the native mode from the EDID, check for it in amdgpu_dm_connector_ddc_get_modes. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu/display: add a proper license to dc_link_dp.cAlex Deucher1-1/+23
Was missing. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Fix white screen page fault for gpuvmNicholas Kazlauskas1-0/+2
[Why] The "base_addr_is_mc_addr" field was added for dcn3.1 support but pa_config was never updated to set it to false. Uninitialized memory causes it to be set to true which results in address mistranslation and white screen. [How] Use memset to ensure all fields are initialized to 0 by default. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-16amd/display: enable panel orientation quirksSimon Ser1-0/+28
This patch allows panel orientation quirks from DRM core to be used. They attach a DRM connector property "panel orientation" which indicates in which direction the panel has been mounted. Some machines have the internal screen mounted with a rotation. Since the panel orientation quirks need the native mode from the EDID, check for it in amdgpu_dm_connector_ddc_get_modes. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Link training retry fix for abort caseMeenakshikumar Somasundaram1-3/+7
[Why] If link training is aborted, it shall be retried if sink is present. [How] Check hpd status to find out whether sink is present or not. If sink is present, then link training shall be tried again with same settings. Otherwise, link training shall be aborted. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Fix unstable HPCP compliance on Chrome BarceloQingqing Zhuo1-2/+20
[Why] Intermittently, there presents two occurrences of 0 stream commits in a single HPD event. Current HDCP sequence does not consider such scenerio, and will thus disable HDCP. [How] Add condition check to include stream remove and re-enable case for HDCP enable. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3Hersen Wu3-17/+34
[Why] call stack of amdgpu dsc mst pbn, slot num calculation is as below: -compute_bpp_x16_from_target_bandwidth -decide_dsc_target_bpp_x16 -setup_dsc_config -dc_dsc_compute_bandwidth_range -compute_mst_dsc_configs_for_link -compute_mst_dsc_configs_for_state from pbn -> dsc target bpp_x16 bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth. Beside pixel clock and bpp, num_slices_h and bpp_increment_div will also affect bpp_x16. from dsc target bpp_x16 -> pbn within dm_update_mst_vcpi_slots_for_dsc, pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true); drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc) { return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006), 8 * 54 * 1000 * 1000); } bpp / 16 trunc digits after decimal point. This will cause calculation delta. drm_dp_calc_pbn_mode does not have other informations, like num_slices_h, bpp_increment_div. therefore, it does not do revese calcuation properly from bpp_x16 to pbn. pbn from drm_dp_calc_pbn_mode is less than pbn from compute_mst_dsc_configs_for_state. This cause not enough mst slot allocated to display. display could not visually light up. [How] pass pbn from compute_mst_dsc_configs_for_state to dm_update_mst_vcpi_slots_for_dsc Cc: stable@vger.kernel.org Reviewed-by: Scott Foster <Scott.Foster@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Get backlight from PWM if DMCU is not initializedHarry Wentland2-14/+12
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e. directly via the PWM registers, if DMCU is not initialized. We always read it back through ABM registers which leads to a mismatch and forces atomic_commit to program the backlight each time. Instead make sure we use the same logic for backlight readback, i.e. read it from panel_cntl if DMCU is not initialized. We also need to remove some extraneous and incorrect calculations at the end of dce_get_16_bit_backlight_from_pwm. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666 Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: dc_assert_fp_enabled assert only if FPU is not enabledAnson Jacob1-1/+1
Assert only when FPU is not enabled. Fixes: 0ea7ee821701 ("drm/amd/display: Add DC_FP helper to check FPU state") Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Add NULL checks for vblank workqueueNicholas Kazlauskas1-14/+18
[Why] If we're running a headless config with 0 links then the vblank workqueue will be NULL - causing a NULL pointer exception during any commit. [How] Guard access to the workqueue if it's NULL and don't queue or flush work if it is. Reported-by: Mike Lothian <mike@fireburn.co.uk> BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700 Fixes: 58aa1c50e5a231 ("drm/amd/display: Use vblank control events for PSR enable/disable") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14amd/display: downgrade validation failure log levelSimon Ser1-1/+2
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On failure this logs a warning to the kernel journal. However warnings shouldn't be used for atomic test-only commit failures: user-space might be perfoming a lot of atomic test-only commits to find the best hardware configuration. Downgrade the log to a regular DRM atomic message. While at it, use the new device-aware logging infrastructure. This fixes error messages in the kernel when running gamescope [1]. [1]: https://github.com/Plagman/gamescope/issues/245 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Enable mem low power control for DCN3.1 sub-IP blocksMichael Strauss1-8/+8
[WHY] Sequences to handle powering down these sub-IP blocks are now ready for use Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: remove force_enable_edp_fec param.Ian Chen2-4/+2
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add VPG and AFMT low power support for DCN3.1Michael Strauss15-29/+593
[WHY] Power down VPG and AFMT blocks when not in use [HOW] Create afmt31 and vpg31 structs and add necessary fields to reg list Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Revert adding degamma coefficientsJaehyun Chung1-38/+24
[Why] Degamma coefficients are calculated in our degamma formula using the regamma coefficients. We do not need to add separate degamma coefficients. [How] Remove the change to add separate degamma coefficients. Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Link training retry fix for abort caseMeenakshikumar Somasundaram1-3/+7
[Why] If link training is aborted, it shall be retried if sink is present. [How] Check hpd status to find out whether sink is present or not. If sink is present, then link training shall be tried again with same settings. Otherwise, link training shall be aborted. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix unstable HPCP compliance on Chrome BarceloQingqing Zhuo1-2/+20
[Why] Intermittently, there presents two occurrences of 0 stream commits in a single HPD event. Current HDCP sequence does not consider such scenerio, and will thus disable HDCP. [How] Add condition check to include stream remove and re-enable case for HDCP enable. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: 3.2.152Aric Cyr1-1/+1
* Correct degamma coefficients * Optimize bandwidth on following fast update * Fix multiple memory leaks reported by coverity * Get backlight from PWM if DMCU is not initialized Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Correct degamma coefficientsJaehyun Chung1-1/+1
[Why] Some incorrect coefficients were being used Reviewed-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: [FW Promotion] Release 0.0.82Anthony Koo1-2/+2
* PSR SMU optimizations * MST dock fixes Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add periodic detection when zstate is enabledEric Yang13-6/+44
[Why] When system is in Z10 HPD interrupts cannot fire, we may miss display configuration changes. [How] When Zstate is enabled, if DMUB indicate DCN has lost power, do a complete detection periodically. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3Hersen Wu3-17/+34
[Why] call stack of amdgpu dsc mst pbn, slot num calculation is as below: -compute_bpp_x16_from_target_bandwidth -decide_dsc_target_bpp_x16 -setup_dsc_config -dc_dsc_compute_bandwidth_range -compute_mst_dsc_configs_for_link -compute_mst_dsc_configs_for_state from pbn -> dsc target bpp_x16 bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth. Beside pixel clock and bpp, num_slices_h and bpp_increment_div will also affect bpp_x16. from dsc target bpp_x16 -> pbn within dm_update_mst_vcpi_slots_for_dsc, pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true); drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc) { return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006), 8 * 54 * 1000 * 1000); } bpp / 16 trunc digits after decimal point. This will cause calculation delta. drm_dp_calc_pbn_mode does not have other informations, like num_slices_h, bpp_increment_div. therefore, it does not do revese calcuation properly from bpp_x16 to pbn. pbn from drm_dp_calc_pbn_mode is less than pbn from compute_mst_dsc_configs_for_state. This cause not enough mst slot allocated to display. display could not visually light up. [How] pass pbn from compute_mst_dsc_configs_for_state to dm_update_mst_vcpi_slots_for_dsc Cc: stable@vger.kernel.org Reviewed-by: Scott Foster <Scott.Foster@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Refine condition of cursor visibility for pipe-splitDale Zhao1-19/+24
[Why] In some scenarios like fullscreen game, major plane is scaled. Then if a upper layer owns the cursor, cursor is invisiable in the majority of the screen. [How] Instead assuming upper plane handles cursor, summing up upper split planes on the same layer. If whole upper plane covers current half/whole pipe plane, disable cursor. Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Optimize bandwidth on following fast updateNicholas Kazlauskas1-9/+8
[Why] The current call to optimize_bandwidth never occurs because flip is always pending from the FULL and FAST updates. [How] Optimize on the following flip when it's a FAST update and we know we aren't going to be modifying the clocks again. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Apply w/a for hard hang on HPDQingqing Zhuo5-2/+43
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans under 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enablement, causing DMUB to access an irresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off when there is any HPD status in connected state. Reviewed-by: Hersen Wu <hersenwu@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add regamma/degamma coefficients and set sRGB when TF is BT709Jaehyun Chung1-20/+40
[Why] In YUV case, need to set the input TF to sRGB instead of BT709, even though the input TF type is distributed. SRGB was not being used because pixel format was not being set in the surface update sequence. Also, we were using the same coefficients for degamma and regamma formula, causing the cutoff point of the linear section of the curve to be incorrect. [How] Set pixel format in the surface update sequence. Add separate coefficient arrays for regamma and degamma. Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Revert "Directly retrain link from debugfs"Anson Jacob1-1/+2
This reverts commit f5b6a20c7ef40599095c796b0500d842ffdbc639. This patch broke new settings from taking effect. Hotplug is required for new settings to take effect. Reviewed-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Get backlight from PWM if DMCU is not initializedHarry Wentland2-14/+12
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e. directly via the PWM registers, if DMCU is not initialized. We always read it back through ABM registers which leads to a mismatch and forces atomic_commit to program the backlight each time. Instead make sure we use the same logic for backlight readback, i.e. read it from panel_cntl if DMCU is not initialized. We also need to remove some extraneous and incorrect calculations at the end of dce_get_16_bit_backlight_from_pwm. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666 Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix multiple memory leaks reported by coverityAnson Jacob4-5/+25
coccinelle patch used: @@ expression enc1,vpg,afmt; @@ - if (!enc1 || !vpg || !afmt) + if (!enc1 || !vpg || !afmt) { + kfree(enc1); + kfree(vpg); + kfree(afmt); return NULL; + } Addresses-Coverity-ID: 1466017: ("Resource leaks") Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: 3.2.151Aric Cyr1-1/+1
* coverity kernel memory leak fixes * NULL pointer dereference fixes * Add periodic detection when zstate is enabled * Fork thread to offload work of hpd_rx_irq Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Revert "dc: w/a for hard hang on HPD on native DP"Qingqing Zhuo1-3/+1
This reverts commit "drm/amd/display: w/a for hard hang on HPD on native DP". [How & Why] Revert change as it does not fix the hard hang in all cases. An alternative w/a will be submitted separately. Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.