aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-11-03drm/amdgpu: use correct register mask to extract fieldOak Zeng1-5/+13
Aldebaran has different register mask definitions for regiter MC_VM_XGMI_LFB_CNTL. Use the correct masks to interpret fields of this register. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03drm/amd/amdgpu: fix bad job hw_fence use after free in advance tdrJingwen Chen1-0/+4
[Why] In advance tdr mode, the real bad job will be resubmitted twice, while in drm_sched_resubmit_jobs_ext, there's a dma_fence_put, so the bad job is put one more time than other jobs. [How] Adding dma_fence_get before resbumit job in amdgpu_device_recheck_guilty_jobs and put the fence for normal jobs Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-02Merge tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds362-6622/+53772
Pull drm updates from Dave Airlie: "Summary below. i915 starts to add support for DG2 GPUs, enables DG1 and ADL-S support by default, lots of work to enable DisplayPort 2.0 across drivers. Lots of documentation updates and fixes across the board. core: - improve dma_fence, lease and resv documentation - shmem-helpers: allocate WC pages on x86, use vmf_insert_pin - sched fixes/improvements - allow empty drm leases - add dma resv iterator - add more DP 2.0 headers - DP MST helper improvements for DP2.0 dma-buf: - avoid warnings, remove fence trace macros bridge: - new helper to get rid of panels - probe improvements for it66121 - enable DSI EOTP for anx7625 fbdev: - efifb: release runtime PM on destroy ttm: - kerneldoc switch - helper to clear all DMA mappings - pool shrinker optimizaton - remove ttm_tt_destroy_common - update ttm_move_memcpy for async use panel: - add new panel-edp driver amdgpu: - Initial DP 2.0 support - Initial USB4 DP tunnelling support - Aldebaran MCE support - Modifier support for DCC image stores for GFX 10.3 - Display rework for better FP code handling - Yellow Carp/Cyan Skillfish updates - Cyan Skillfish display support - convert vega/navi to IP discovery asic enumeration - validate IP discovery table - RAS improvements - Lots of fixes i915: - DG1 PCI IDs + LMEM discovery/placement - DG1 GuC submission by default - ADL-S PCI IDs updated + enabled by default - ADL-P (XE_LPD) fixed and updates - DG2 display fixes - PXP protected object support for Gen12 integrated - expose multi-LRC submission interface for GuC - export logical engine instance to user - Disable engine bonding on Gen12+ - PSR cleanup - PSR2 selective fetch by default - DP 2.0 prep work - VESA vendor block + MSO use of it - FBC refactor - try again to fix fast-narrow vs slow-wide eDP training - use THP when IOMMU enabled - LMEM backup/restore for suspend/resume - locking simplification - GuC major reworking - async flip VT-D workaround changes - DP link training improvements - misc display refactorings bochs: - new PCI ID rcar-du: - Non-contiguious buffer import support for rcar-du - r8a779a0 support prep omapdrm: - COMPILE_TEST fixes sti: - COMPILE_TEST fixes msm: - fence ordering improvements - eDP support in DP sub-driver - dpu irq handling cleanup - CRC support for making igt happy - NO_CONNECTOR bridge support - dsi: 14nm phy support for msm8953 - mdp5: msm8x53, sdm450, sdm632 support stm: - layer alpha + zpo support v3d: - fix Vulkan CTS failure - support multiple sync objects gud: - add R8/RGB332/RGB888 pixel formats vc4: - convert to new bridge helpers vgem: - use shmem helpers virtio: - support mapping exported vram zte: - remove obsolete driver rockchip: - use bridge attach no connector for LVDS/RGB" * tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits) drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits drm/amd/display: MST support for DPIA drm/amdgpu: Fix even more out of bound writes from debugfs drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts drm/amdgpu/UAPI: rearrange header to better align related items drm/amd/display: Enable dpia in dmub only for DCN31 B0 drm/amd/display: Fix USB4 hot plug crash issue drm/amd/display: Fix deadlock when falling back to v2 from v3 drm/amd/display: Fallback to clocks which meet requested voltage on DCN31 drm/amd/display: move FPU associated DCN301 code to DML folder drm/amd/display: fix link training regression for 1 or 2 lane drm/amd/display: add two lane settings training options drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings drm/amd/display: implement decide lane settings drm/amd/display: adopt DP2.0 LT SCR revision 8 drm/amd/display: FEC configuration for dpia links in MST mode drm/amd/display: FEC configuration for dpia links drm/amd/display: Add workaround flag for EDID read on certain docks drm/amd/display: Set phy_mux_sel bit in dmub scratch register ...
2021-11-01Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+3
Pull generic confidential computing updates from Borislav Petkov: "Add an interface called cc_platform_has() which is supposed to be used by confidential computing solutions to query different aspects of the system. The intent behind it is to unify testing of such aspects instead of having each confidential computing solution add its own set of tests to code paths in the kernel, leading to an unwieldy mess" * tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide: Replace the use of mem_encrypt_active() with cc_platform_has() x86/sev: Replace occurrences of sev_es_active() with cc_platform_has() x86/sev: Replace occurrences of sev_active() with cc_platform_has() x86/sme: Replace occurrences of sme_active() with cc_platform_has() powerpc/pseries/svm: Add a powerpc version of cc_platform_has() x86/sev: Add an x86 version of cc_platform_has() arch/cc: Introduce a function to check for confidential computing features x86/ioremap: Selectively build arch override encryption functions
2021-10-28drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bitsAlex Deucher1-2/+2
The DMA mask on SI parts is 40 bits not 44. Copy paste typo. Fixes: 244511f386ccb9 ("drm/amdgpu: simplify and cleanup setting the dma mask") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1762 Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: MST support for DPIAMeenakshikumar Somasundaram4-0/+111
[Why] - DPIA MST slot registers are not programmed during payload allocation and hence MST does not work with DPIA. - HPD RX interrupts are not handled for DPIA. [How] - Added inbox command to program the MST slots whenever payload allocation happens for DPIA links. - Added support for handling HPD RX interrupts Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu: Fix even more out of bound writes from debugfsPatrik Jakobsson1-9/+9
CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) Fixes: 918698d5c2b5 ("drm/amd/display: Return the number of bytes parsed than allocated") Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu/discovery: add SDMA IP instance info for soc15 partsAlex Deucher1-0/+14
Add secondary instance version info for soc15 parts. Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 partsAlex Deucher1-0/+3
Add secondary instance version info for vega20, arcturure, and aldebaran. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Enable dpia in dmub only for DCN31 B0Jude Shih3-0/+16
[Why] DMUB binary is common for both A0 and B0. Hence, driver should notify FW about the support for DPIA in B0. [How] Added dpia_supported bit in dmub_fw_boot_options and will be set only for B0. Assign dpia_supported to true before dm_dmub_hw_init in B0 case. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix USB4 hot plug crash issueJude Shih1-7/+16
[Why] Notify data from outbox corrupt, the notify type should be 2 (HPD) instead of 0 (No data). We copied the address instead of the value. The memory might be freed in the end of outbox IRQ [How] We should allocate the memory of notify and copy the whole content from outbox to hpd handle function Fixes: 88f52b1fff891e ("drm/amd/display: Support for SET_CONFIG processing with DMUB") Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix deadlock when falling back to v2 from v3Nicholas Kazlauskas1-4/+2
[Why] A deadlock in the kernel occurs when we fallback from the V3 to V2 add_topology_to_display or remove_topology_to_display because they both try to acquire the dtm_mutex but recursive locking isn't supported on mutex_lock(). [How] Make the mutex_lock/unlock more fine grained and move them up such that they're only required for the psp invocation itself. Fixes: bf62221e9d0e ("drm/amd/display: Add DCN3.1 HDCP support") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fallback to clocks which meet requested voltage on DCN31Michael Strauss1-3/+10
[WHY] On certain configs, SMU clock table voltages don't match which cause parser to behave incorrectly by leaving dcfclk and socclk table entries unpopulated. [HOW] Currently the function that finds the corresponding clock for a given voltage only checks for exact voltage level matches. In the case that no match gets found, parser now falls back to searching for the max clock which meets the requested voltage (i.e. its corresponding voltage is below requested). Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: move FPU associated DCN301 code to DML folderQingqing Zhuo7-365/+450
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN301 to DML, where all FPU code should locate. Cc: Christian König <christian.koenig@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: fix link training regression for 1 or 2 laneWenjing Liu1-3/+32
[why] We have a regression that cause maximize lane settings to use uninitialized data from unused lanes. This will cause link training to fail for 1 or 2 lanes because the lane adjust is populated incorrectly sometimes. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: add two lane settings training optionsWenjing Liu2-2/+13
[why] option 1: disallow different lanes to have different lane settings option 2: dpcd lane settings will always use the same hw lane settings even if it doesn't match requested lane adjust Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: decouple hw_lane_settings from dpcd_lane_settingsWenjing Liu4-106/+63
[why] As DP features expands, we have encountered many situations where we must configure a different DPCD lane setting from hw lane settings we output. The change is to decouple hw lane settings from dpcd lane settings to provide flexibility to configure dpcd and hw individually. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: implement decide lane settingsWenjing Liu4-232/+155
[why] Decouple lane settings decision logic all to its own function. The function takes in lane adjust array and link training settings and decide what hw lane setting and dpcd lane setting should be used. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: adopt DP2.0 LT SCR revision 8Wenjing Liu1-8/+13
[how] revision 8 SCR requires DP Source to write TPS2 and FFE lane adjustment in one 5 byte write aux transaction. It specifies to read aux rd interval value as soon as we turn on TPS1 pattern. Cc: Wayne Lin <wayne.lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: FEC configuration for dpia links in MST modeMeenakshikumar Somasundaram1-1/+1
[Why] To fix the check condition for fec enable for dpia links in MST mode. [How] dc_link_should_enable_fec() to be used to check whether fec should be enabled in MST mode. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: FEC configuration for dpia linksMeenakshikumar Somasundaram1-1/+1
[Why] To fix the check condition for fec enable for dpia links. [How] dc_link_should_enable_fec() to be used to check whether fec should be enabled. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add workaround flag for EDID read on certain docksJimmy Kizito2-0/+4
[Why] Certain docks appear to NAK I2C writes to the segment pointer with the MOT (middle of transaction) bit clear. This behaviour can cause EDID reads from higher segments to fail. [How] Add workaround flag for links which connect to docks exhibiting this issue. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Set phy_mux_sel bit in dmub scratch registerHansen5-3/+9
[Why] B0 has pipe mux for DIGC and DIGD which can be connected to PHYF/PHYG or PHYC/PHY D. [How] Based on chip internal hardware revision id determine it is B0 and set DMUB scratch register so DMUBFW can connect the display pipe is connected correctly to the dig. Cc: Wayne Lin <wayne.lin@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Manually adjust strobe for DCN303Martin Leung1-0/+14
why: DCN303's 4 channel SOC BB causes problems at strobe how: workaround to manually adjust strobe calculation using FCLK restrict. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: 3.2.159Aric Cyr1-1/+1
This new DC version brings improvements in the following areas: - Improvements for USB4; - Isolate FPU code for DCN20, DCN301, and DSC; - Fixes on Linking training; - Refactoring some parts of the code, such as PSR; Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: [FW Promotion] Release 0.0.90Anthony Koo1-2/+2
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Remove unused macrosAnson Jacob3-8/+0
fixed16_to_double & fixed16_to_double_to_cpu are not used. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: allow windowed mpo + odmDmytro Laktyushkin3-17/+28
This change adds a config flag to allow non fullscreen MPO during ODM. Scaling calculation will still fail configurations where video is only one one side of the screen. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: set Layout properly for 8ch audio at timing validationGuo, Bing1-2/+4
Why: For audio packet type 0x02, there are 2 Layouts: Layout = 0 for 2 channels and Layout = 1 for > 2 channels. Layout will affect bandwidth check. Currently, for HDMI FRL, Layout field isn't set and has a default value of 0, so theoretically only 2-channel audio for audio packet type 0x02 is supported now. How: 1. Set Layout properly according to maximum audio channel numbers for audios with audio packet type 0x02. 2. 8ch LPCM audio is not supported for timing modes with v_active <= 576. Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix 3DLUT skipped programmingAric Cyr2-0/+5
We found a compilation error that we thought was caused by the 3DLUT patch; later on, we figured out the root cause of the problem, but we already applied the revert in the wrong patch. This commit brings it back the 3DLUT fix. Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: 3.2.158Aric Cyr1-1/+1
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: [FW Promotion] Release 0.0.89Anthony Koo1-3/+6
- Add flag to control root clock gating in init_hw - Add flag to indicate a diags environment is being used Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Handle I2C-over-AUX write channel status updateAric Cyr4-10/+44
[Why] When writing long AUX commands some sinks will respond will write status update requiring source to read status. [How] When a write request is replied with data (AUX_ACK_M), retry a read of write status to determine when the write is completed. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add comment for preferred_training_settingsGeorge Shen1-0/+4
[Why] Currently the naming of preferred_training_settings is ambiguous and has caused confusion regarding its purpose and usage. [How] Add comment to clarify the intention. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Implement fixed DP drive settingsGeorge Shen6-1/+27
[Why] Currently there are use cases that require DP link to maintain fixed VS and PE in HW regardless of what the sink requests. BIOS integrated info table will specify whether we need to use the fixed drive settings, and the drive settings to use. [How] Implement changes to parse the integrated info table and set the fixed drive settings accordingly. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: restyle dcn31 resource header inline with other asicsDmytro Laktyushkin2-2/+12
Style change for better consistency across codebase Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: clean up dcn31 revision checkDmytro Laktyushkin1-8/+2
This is unnecessary in clk_mgr Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Defer GAMCOR and DSCL power down sequence to vupdateMichael Strauss6-6/+38
[WHY] Every other CM LUT power down sequence is deferred to next vupdate as memory powerdown updates immediately while selecting LUTs is double buffered. Previous update to defer LUT power down missed GAMCOR and DSCL, causing some visible flicker when entering/exiting fullscreen video playback. [HOW] Update dpp deferred update loop to check for valid DPPs in res_pool instead of referencing dcn_ip which turns out to not be populated during runtime. Move GAMCOR and DSCL powerdown to dpp deferred updates. Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Set i2c memory to light sleep during hw initMichael Strauss3-2/+9
[WHY] i2c memory doesn't get set to light sleep on hw init as intended [HOW] Set i2c to light sleep after reg gets zeroed, ensuring memory power control doesn't get disabled for any other DIO memory Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: fix a crash on USB4 over C20 PHYAhmad Othman1-5/+20
[Why] Crash when USB4 is connected. [How] Added an ASIC specific code guard. Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: move FPU associated DSC code to DML folderQingqing Zhuo8-338/+389
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DSC to DML, where all FPU code should locate. This change does not refactor any functions but move code around. Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add support for USB4 on C20 PHY for DCN3.1Ahmad Othman4-6/+64
[Why] Created new fields that matches new B0 structs On DCN31 the mapping of DIO output to PHY differs from A0 to B0 boards with new PHY C20 & this new mapping needed to be handled. [How] Mapped new structure based on new structs Added logic for mapping over A0 and B0 boards Hooked all new structs together. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: dc_link_set_psr_allow_active refactoringRobin Chen10-23/+125
[Why] To expose new power optimization flags to PSR interface. It allows the PSR related power features can be enabled separately base on different use scenarios. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Robin Chen <po-tchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Get ceiling for v_total calcGuo, Bing1-3/+12
Updating certain variable blanking calculations to use ceiling function. Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: dcn20_resource_construct reduce scope of FPU enabledAnson Jacob1-7/+9
Limit when FPU is enabled to only functions that does FPU operations for dcn20_resource_construct, which gets called during driver initialization. Enabling FPU operation disables preemption. Sleeping functions(mutex (un)lock, memory allocation using GFP_KERNEL, etc.) should not be called when preemption is disabled. Fixes the following case caught by enabling CONFIG_DEBUG_ATOMIC_SLEEP in kernel config [ 1.338434] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 1.347395] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 197, name: systemd-udevd [ 1.356356] CPU: 7 PID: 197 Comm: systemd-udevd Not tainted 5.13.0+ #3 [ 1.356358] Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021 [ 1.356360] Call Trace: [ 1.356361] dump_stack+0x6b/0x86 [ 1.356366] ___might_sleep.cold+0x87/0x98 [ 1.356370] __might_sleep+0x4b/0x80 [ 1.356372] mutex_lock+0x21/0x50 [ 1.356376] smu_get_uclk_dpm_states+0x3f/0x80 [amdgpu] [ 1.356538] pp_nv_get_uclk_dpm_states+0x35/0x50 [amdgpu] [ 1.356711] init_soc_bounding_box+0xf9/0x210 [amdgpu] [ 1.356892] ? create_object+0x20d/0x340 [ 1.356897] ? dcn20_resource_construct+0x46f/0xd30 [amdgpu] [ 1.357077] dcn20_resource_construct+0x4b1/0xd30 [amdgpu] ... Tested on: 5700XT (NAVI10 0x1002:0x731F 0x1DA2:0xE410 0xC1) Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Align bw context with hw config when system resumeLewis Huang1-0/+6
[Why] When the vbios config and driver config are different, if we update clock to lower before call program_timing and program_pixel_clk, garbage appear. [How] Align bw context with hw config when system resume Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu/pm: look up current_level for asics without pm callbackAlex Deucher1-1/+3
For asics without a callback, use the current level rather than 0xff. This can avoid an unnecesary forced level set on older asics when set by the user. Reviewed-by: Kevin Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu/display: add quirk handling for stutter modeAlex Deucher1-0/+33
Stutter mode is a power saving feature on GPUs, however at least one early raven system exhibits stability issues with it. Add a quirk to disable it for that system. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214417 Fixes: 005440066f929b ("drm/amdgpu: enable gfxoff again on raven series (v2)") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu: remove GPRs init for ALDEBARAN in gpu reset (v3)Tao Zhou1-3/+3
Remove GPRs init for ALDEBARAN in gpu reset temporarily, will add the init once the algorithm is stable. v2: Only remove GPRs init in gpu reset. v3: Suspend needs it, only skip it in gpu reset. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdkfd: Remove cu mask from struct queue_properties(v2)Lang Yu8-54/+57
Actually, cu_mask has been copied to mqd memory and does't have to persist in queue_properties. Remove it from queue_properties. And use struct mqd_update_info to store such properties, then pass it to update queue operation. v2: * Rename pqm_update_queue to pqm_update_queue_properties. * Rename struct queue_update_info to struct mqd_update_info. * Rename pqm_set_cu_mask to pqm_update_mqd. Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.