aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2020-01-14drm/amdgpu: enable S/G display on PCO and RV2 (v2)Alex Deucher1-6/+16
It should work on all Raven variants, but some users have reported issues with original Raven with IOMMU enabled. So far there have been no issues observed with PCO or RV2. v2: split out the dm init and domain changes into separate patches. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu/display: set gpu vm flag for all asics which support itAlex Deucher1-6/+8
It won't get used unless the driver allows the gtt domain for display buffers which is controlled elsewhere. Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu/gfx9: remove unused sdma headersAlex Deucher1-9/+0
All of the sdma stuff these were used for moves to the sdma code, so remove them. Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amd/amdgpu: add missing umc_6_1_2_sh_mask.h header file (v2)Tom St Denis1-0/+91
(v2): Fix preprocessor tag Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: check sdma ras funcs pointer before accessingHawking Zhang1-2/+6
sdma ras funcs are not supported by ASIC prior to vega20 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: calculate MCUMC_ADDRT0 per asic's UMC offsetGuchun Chen1-4/+6
Hardcoded offset is not friendly. And another benifit of this patch is to keep read and write access to this register be consistent with other similar UMC regsiters in this file. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: add MCUMC_ADDRT0 offset to ip header fileGuchun Chen2-0/+4
Both are needed on vega20 and arcturus chip. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu/powerplay: fix warning in smu_v11_0.cAlex Deucher1-1/+1
Cast to make min() happy. The values are well within range. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amd/powerplay: sw ctf for arcturusKenneth Feng1-2/+3
change the sw ctf setting to smu_v11_0_set_thermal_range() since software_shutdown_temp shares the same definition and name in all the smu11 project. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu/sriov: workaround on rev_id for Navi12 under sriovTiecheng Zhou1-0/+6
guest vm gets 0xffffffff when reading RCC_DEV0_EPF0_STRAP0, as a consequence, the rev_id and external_rev_id are wrong. workaround it by hardcoding the rev_id to 0, which is the default value. v2. add comment in the code Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amd/display: Don't disable DP PHY when link loss happensZhan Liu1-1/+0
[Why] There is a use case that link loss happens accidentally, and we need to recover that link loss as soon as possible. Under this circumstance, we will perform link training, and try to recover the link that's just lost. However, if link PHY is disabled before link training happens, then DP display will never come back again. Also, please note that dropping this disable_phy function call won't break USB-C hotplug functionality. (This line of code was firstly introduced associated with a patch to fix USB-C hotplug issue) [How] Don't disable DP transmitter and its encoder before link training happens, even if link loss is detected. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: read sdma edc counter to clear the countersHawking Zhang2-10/+8
SDMA edc counter registers were added in gfx edc counters array. When querying gfx error counter in that array, there is no way to differentiate sdma instance number for different asic and then results to NULL pointer access when trying to read sdma register base address for instances greater than 2 on Vega20. In addition, this also results to wrong gfx error counters since it actually added sdma edc counters. Therefore, sdma edc counter registers should be separated from gfx edc counter regsiter array and only get initialized when driver tries to enable sdma ras. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: add ras_late_init and ras_fini for sdma v4Hawking Zhang2-2/+7
move ras_late_init and ras_fini to sdma_ras_funcs table Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: support error reporting for sdma ip blockHawking Zhang1-0/+8
invoke sdma query_ras_error_count to get sdma single bit error count Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: add query_ras_error_count function for sdma v4Hawking Zhang2-0/+169
query_ras_error_count function will be invoked to query single bit error count detected in sdma ip block Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: enable VCN2.5 IP block for ArcturusLeo Liu1-2/+1
With default PSP FW loading Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu/vcn2.5: fix PSP FW loading for the second instanceLeo Liu1-2/+2
ucodes for instances are from different location Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu: catch amdgpu_irq_add_id failureNirmoy Das1-0/+4
Do not ignore amdgpu_irq_add_id return value while registering VMC page fault interrupt. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amd/powerplay: cover the powerplay implementation details V3Evan Quan12-208/+212
This can save users much troubles. As they do not actually need to care whether swSMU or traditional powerplay routine should be used. V2: apply the fixes to vi.c and cik.c also V3: squash in oops fix Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdkfd: Improve function get_sdma_rlc_reg_offset() (v2)Yong Zhao1-21/+45
The SOC15_REG_OFFSET() macro needs to dereference adev->reg_offset[IP] pointer, which is sometimes NULL when there are fewer than 8 sdma engines. Avoid that by not initializing the array regardless. v2: squash in warning fixes Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu/display: Use u64 divide macro for round up divisionMikita Lipski1-1/+1
[why] Fix compilation warnings on i386 architecture: undefined reference to `__udivdi3' [how] Switch DIV_ROUND_UP to DIV64_U64_ROUND_UP Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-13Merge tag 'amd-drm-next-5.6-2020-01-10-dp-mst-dsc' of git://people.freedesktop.org/~agd5f/linux into drm-nextDave Airlie9-11/+571
amd-drm-next-5.6-2020-01-10-dp-mst-dsc: drm: - Add MST helper for PBN calculation of DSC modes - Parse FEC caps on MST ports - Add MST DPCD R/W functions - Add MST helpers for virtual DPCD aux - Add MST HUB quirk - Add MST DSC enablement helpers amdgpu: - Enable MST DSC - Add fair share algo for DSC bandwidth calcs - Fix for 32 bit builds Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110214328.308549-1-alexander.deucher@amd.com
2020-01-13Merge tag 'amd-drm-next-5.6-2020-01-09' of git://people.freedesktop.org/~agd5f/linux into drm-nextDave Airlie178-1952/+8423
amd-drm-next-5.6-2020-01-09: amdgpu: - Enable DCN support on POWER - Enable GFXOFF for Raven1 refresh - Clean up MM engine idle handlers - HDMI 2.0 audio fixes - Fixes for some 10 bpc EDP panels - Watermark fixes for renoir - SR-IOV fixes - Runtime pm robustness fixes - Arcturus VCN fixes - RAS fixes - BACO fixes for Arcturus - Stable pstate fixes for swSMU - HDCP fixes - PSP cleanup - HDMI fixes - Misc cleanups amdkfd: - Spread interrupt work across cores to reduce latency - Topology fixes for APUs - GPU reset improvements UAPI: - Enable DRIVER_SYNCOBJ_TIMELINE for vulkan - Return better error values for kfd process ioctl Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200109230338.8022-1-alexander.deucher@amd.com
2020-01-10drm/amd/display: Fix compilation warnings on i386Mikita Lipski1-2/+2
[why] Compilation error "undefined reference to `__udivdi3'" was thrown on i386 architecture. [how] Use div_u64 for unsigned long division instead of a divide operator. Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amdgpu/display: protect new DSC code with CONFIG_DRM_AMD_DC_DCNAlex Deucher3-1/+17
Otherwise we get undefined symbols. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amd/display: Trigger modesets on MST DSC connectorsMikita Lipski1-0/+33
Whenever a connector on an MST network is attached, detached, or undergoes a modeset, the DSC configs for each stream on that topology will be recalculated. This can change their required bandwidth, requiring a full reprogramming, as though a modeset was performed, even if that stream did not change timing. Therefore, whenever a crtc has drm_atomic_crtc_needs_modeset, for each crtc that shares a MST topology with that stream and supports DSC, add that crtc (and all affected connectors and planes) to the atomic state and set mode_changed on its state v2: Do this check only on Navi and before adding connectors and planes on modesetting crtcs v3: Call the drm_dp_mst_add_affected_dsc_crtcs() to update all affected CRTCs Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amd/display: Recalculate VCPI slots for new DSC connectorsMikita Lipski1-5/+71
[why] Since for DSC MST connector's PBN is claculated differently due to compression, we have to recalculate both PBN and VCPI slots for that connector. [how] The function iterates through all the active streams to find, which have DSC enabled, then recalculates PBN for it and calls drm_dp_helper_update_vcpi_slots_for_dsc to update connector's VCPI slots. v2: - use drm_dp_mst_atomic_enable_dsc per port to enable/disable DSC v3: - Iterate through connector states from the state passed - On each connector state get stream from dc_state, instead CRTC state Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amd/display: Check return value of drm helperMikita Lipski1-45/+54
If driver fails to update update VCPI allocation during compute_mst_dsc_configs_for_state - fail the function by return early. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amd/display: MST DSC compute fair shareDavid Francis5-2/+376
If there is limited link bandwidth on a MST network, it must be divided fairly between the streams on that network Implement an algorithm to determine the correct DSC config for each stream The algorithm: This [ ] ( ) represents the range of bandwidths possible for a given stream. The [] area represents the range of DSC configs, and the () represents no DSC. The bandwidth used increases from left to right. First, try disabling DSC on all streams [ ] (|) [ ] (|) Check this against the bandwidth limits of the link and each branch (including each endpoint). If it passes, the job is done Second, try maximum DSC compression on all streams that support DSC [| ] ( ) [| ] ( ) If this does not pass, then enabling this combination of streams is impossible Otherwise, divide the remaining bandwidth evenly amongst the streams [ | ] ( ) [ | ] ( ) If one or more of the streams reach minimum compression, evenly divide the reamining bandwidth amongst the remaining streams [ |] ( ) [ |] ( ) [ | ] ( ) [ | ] ( ) If all streams can reach minimum compression, disable compression greedily [ |] ( ) [ |] ( ) [ ] (|) Perform this algorithm on each full update, on each MST link with at least one DSC stream on it After the configs are computed, call dcn20_add_dsc_to_stream_resource on each stream with DSC enabled. It is only after all streams are created that we can know which of them will need DSC. Do all of this at the end of amdgpu atomic check. If it fails, fail check; This combination of timings cannot be supported. v2: Use drm_dp_mst_atomic_check to validate bw for certain dsc configurations v3: Use dc_dsc_policy structure to get min and max bpp rate for DSC configuration Acked-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amd/display: Add PBN per slot calculation for DSCMikita Lipski2-0/+10
[why] Need to calculate VCPI slots differently for DSC to take in account current link rate, link count and FEC. [how] Add helper to get pbn_div from dc_link Acked-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Manually overwrite PBN divider for calculating timeslotsMikita Lipski1-1/+2
[why] For DSC case we cannot use topology manager's PBN divider variable. The default divider does not take FEC into account. Therefore the driver has to calculate its own divider based on the link rate and lane count its handling, as it is hw specific. [how] Pass pbn_div as an argument, which is used if its more than zero, otherwise default topology manager's pbn_div will be used. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amd/display: Write DSC enable to MST DPCDDavid Francis1-1/+18
Rework the dm_helpers_write_dsc_enable callback to handle the MST case. Use the cached dsc_aux field. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amd/display: Validate DSC caps on MST endpointsDavid Francis2-1/+29
During MST mode enumeration, if a new dc_sink is created, populate it with dsc caps as appropriate. Use drm_dp_mst_dsc_aux_for_port to get the raw caps, then parse them onto dc_sink with dc_dsc_parse_dsc_dpcd. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amd/display: Initialize DSC PPS variables to 0David Francis2-0/+6
For DSC MST, sometimes monitors would break out in full-screen static. The issue traced back to the PPS generation code, where these variables were being used uninitialized and were picking up garbage. memset to 0 to avoid this Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add PBN calculation for DSC modesDavid Francis1-1/+1
With DSC, bpp can be fractional in multiples of 1/16. Change drm_dp_calc_pbn_mode to reflect this, adding a new parameter bool dsc. When this parameter is true, treat the bpp parameter as having units not of bits per pixel, but 1/16 of a bit per pixel v2: Don't add separate function for this v3: In the equation divide bpp by 16 as it is expected not to leave any remainder v4: Added DSC test parameters for selftest Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amdkfd: Improve kfd_process lookup in kfd_ioctlFelix Kuehling2-4/+28
Use filep->private_data to store a pointer to the kfd_process data structure. Take an extra reference for that, which gets released in the kfd_release callback. Check that the process calling kfd_ioctl is the same that opened the file descriptor. Return -EBADF if it's not, so that this error can be distinguished in user mode. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Reduce HDMI pixel encoding if max clock is exceededThomas Anderson1-22/+23
For high-res (8K) or HFR (4K120) displays, using uncompressed pixel formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the "interesting" modes would be disabled, leaving only low-res or low framerate modes. This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS clock is exceeded. Verified that 8K30 and 4K120 are now available and working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Thomas Anderson <thomasanderson@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: add event type check before restart the authenticationXiaodong Yan1-2/+7
[Why] Some combined docks will always trigger CP_IRQ but there's nothing the driver needs to take care of, but the CP_IRQ breaks the original hdcp state and triggers the driver to restart the authentication. [How] Add the event type check before restart the authentication or resend the stream management Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Add delay after h' watchdog timeout eventMichael Strauss1-4/+4
[WHY] Some monitors trigger HDCP2.x timeout after reinitializing (e.g. toggling HDR) by taking longer than expected to return h' (h prime) Previously the 200ms watchdog timer retry count would hit MAX_NUM_OF_ATTEMPTS (4), causing fallback to HDCP1.x [HOW] Adding a 1s delay after an h' watchdog timeout provides enough time for affected monitors to return h' in time without hitting MAX_NUM_OF_ATTEMPTS Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: rx_validation failed resume from sleepJing Zhou1-4/+16
[why] Most DP/HDMI monitors need more time to response rx_validation request. [how] Add generic 1000ms delay. Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Return correct Error code for validate h_primeBhawanpreet Lakha1-1/+1
[Why] We are returning incorrect error code for validate h prime [How] Return the right Error code Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Fix hdcp1 create sessionBhawanpreet Lakha1-1/+2
[Why] PSP needs session ID to destroy a session, In the case where we fail create session we don't have a session ID [How] Set the session ID before returning Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: fix psp return condition for hdcp moduleBhawanpreet Lakha1-1/+1
We are returning SUCCESS when hdcp_status != Success. Fix it. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd: use list_for_each_entry for list iteration.Wambui Karuga1-15/+4
list_for_each() can be replaced by the more concise list_for_each_entry() here for iteration over the lists. This change was reported by coccinelle. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07Revert "drm/amdgpu: Set no-retry as default."Alex Deucher1-2/+2
This reverts commit 51bfac71cade386966791a8db87a5912781d249f. This causes stability issues on some raven boards. Revert for now until a proper fix is completed. Bug: https://gitlab.freedesktop.org/drm/amd/issues/934 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206017 Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amdgpu/gfx: simplify old firmware warningAlex Deucher2-4/+2
Put it on one line to avoid whitespace issues when printing in the log. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amdgpu/gmc10: use common invalidation engine helperAlex Deucher2-16/+5
Rather than open coding it. This also changes the free masks to better reflect the usage by other components. Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amdgpu/gmc: move invaliation bitmap setup to common codeAlex Deucher4-41/+42
So it can be shared with newer GMC versions. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amdgpu: updated UMC error address record with correct channel indexJohn Clements1-31/+30
defined macros for repetitive for loops Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amdgpu: resolved bug in UMC RAS CE queryJohn Clements1-12/+20
switch CE counter register access' to use SMN disable UMC indexing mode Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.