aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2019-12-18drm/amd/display: AVI info package change due to spec updateQingqing Zhuo1-1/+1
YQ should be limited range for all cases. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: Add definition for number of backlight data pointsCamille Cho1-1/+2
[Why] A hardcoded number is used today [How] Add definition for number of BL data points Signed-off-by: Camille Cho <Camille.Cho@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: Add interface to adjust DSC max target bpp limitJoshua Aberback2-3/+13
[Why] For some use cases we need to be able to adjust the maximum target bpp allowed by DSC policy. [How] New interface dc_dsc_policy_set_max_target_bpp_limit Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: Disable integerscaling for downscale and MPOAidan Yang1-1/+17
[Why] Integer scaling is applied to MPO planes when downscaling, MPO planes use variable taps and integer scaling sets taps=1 [How] Disable integer scaling on MPO planes, Disable integer scaling for downscaling planes Signed-off-by: Aidan Yang <Aidan.Yang@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: Use physical addressing for DMCUB on both dcn20/21Nicholas Kazlauskas4-125/+44
[Why] CW0 and CW1 need to use physical addressing mode for dcn20 and dcn21. The current code for dcn20 is using virtual. [How] We already program the DMCUB like this on dcn21 so we should just use the same sequence for both. Copy the dcn21 sequences into the dmjub_dcn20.c file and rename them. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: Get DMUB registers from ASIC specific structsNicholas Kazlauskas7-6/+176
[Why] These values can differ per ASIC and should follow the full DC style register programming model. [How] Define a common list and fill in the common list separately for dcn20 and dcn21. Unlike DC we're not using designated initializers for better compiler compatibility since this resides in the DMUB service. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: Add wait for flip not pending on pipe unlockNoah Abradjian1-3/+36
[Why] Lack of proper timing caused intermittent underflow on unplug external DP. A previous fix was invalid and caused S0i3 regression, so had to be reverted. [How] When unlocking pipe, wait for no pipes to have flip pending before unlocking. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: disable lttpr for RNabdoulaye berthe1-1/+1
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: HDMI 2.x audio bandwidth checkCharlene Liu5-2/+57
Add HDMI 2.x audio bandwidth check Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu/vcn: remove JPEG related code from idle handler and begin useLeo Liu1-23/+5
For VCN2.0 and above, VCN has been separated from JPEG Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu/vcn1.0: use its own idle handler and begin use funcsLeo Liu5-6/+95
Because VCN1.0 power management and DPG mode are managed together with JPEG1.0 under both HW and FW, so separated them from general VCN code. Also the multiple instances case got removed, since VCN1.0 HW just have a single instance. v2: override work func with vcn1.0's own Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu: enable gfxoff for raven1 refreshchangzhu1-11/+4
When smu version is larger than 0x41e2b, it will load raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads raven_kicker_rlc.bin. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu/sriov: Tonga sriov also need load firmware with smuEmily Deng2-4/+2
Fix Tonga sriov load driver fail issue. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewd-by Yintian Tao <Yintian.tao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu: drop useless BACO arg in amdgpu_ras_reset_gpuGuchun Chen6-8/+7
BACO reset mode strategy is determined by latter func when calling amdgpu_ras_reset_gpu. So not to confuse audience, drop it. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: add missing dcn link encoder regsRoman Li5-6/+253
[Why] The earlier change: "check phy dpalt lane count config" uses link encoder registers not defined properly. That caused regression with mst-enabled display not lighting up. [How] Add missing reg definitions. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu: add dpcs20 registersRoman Li2-0/+4559
add reg headers to dpcs includes Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu: move dpcs headers to dpcs includesRoman Li2-0/+0
- create dpcs directory for dpcs asic_reg headers - move dpcs21 reg headers from dcn to dpcs directory Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu: Add CU info print logYong Zhao1-0/+6
The log will be useful for easily getting the CU info on various emulation models or ASICs. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdkfd: Use Arcturus specific set_vm_context_page_table_base()Yong Zhao3-14/+22
Since Arcturus has it own function pointer, we can move Arcturus specific logic to there rather than leaving it entangled with other GFX9 chips. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/powerplay: fix various dereferences of a pointer before it is null checkedColin Ian King2-15/+6
There are several occurrances of the pointer hwmgr being dereferenced before it is null checked. Fix these by performing the dereference of hwmgr after it has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: c9ffa427db34e6 ("drm/amd/powerplay: enable pp one vf mode for vega10") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdkfd: queue kfd interrupt work to different CPUPhilip Yang1-1/+16
Because queue_work schedule the work on the same CPU the interrupt handler is running, if there are many interrupts pending, it takes longer time for work queue to start, or even worse system will hang. v2: queue work to same NUMA node for better cache locality v3: handle cpumask_next wraparound case Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18amdgpu: Wrap FPU dependent functions in dc20Timothy Pearson1-4/+16
dc20 containes several FPU-dependent functions without proper FPU kernel mode enable/disable wrappers. Add the required wrappers for both x86 and POWER. This enables Navi DC20 support for POWER systems. v2: fix compilation Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18amdgpu: Enable initial DCN support on POWERTimothy Pearson8-1/+73
DCN requires floating point support to operate. Add the appropriate x86/ppc64 guards and FPU / AltiVec / VSX context switches to DCN. Note that the current DC20 code doesn't contain all required FPU wrappers on x86 or POWER, so this patch is insufficient to fully enable DC20 on POWER. v2: s/X86_64/X86/g to retain previous behavior. Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18amdgpu: Prepare DCN floating point macros for generic arch supportTimothy Pearson4-16/+22
Introduce DC_FP_START()/DC_FP_END() macros to help enable floating point kernel mode support across various architectures. v2: move copyright update to commit which adds the changes Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-17Merge tag 'drm-next-5.6-2019-12-11' of git://people.freedesktop.org/~agd5f/linux into drm-nextDaniel Vetter366-6472/+15977
drm-next-5.6-2019-12-11: amdgpu: - Add MST atomic routines - Add support for DMCUB (new helper microengine for displays) - Add OEM i2c support in DC - Use vstartup for vblank events on DCN - Simplify Kconfig for DC - Renoir fixes for DC - Clean up function pointers in DC - Initial support for HDCP 2.x - Misc code cleanups - GFX10 fixes - Rework JPEG engine handling for VCN - Add clock and power gating support for JPEG - BACO support for Arcturus - Cleanup PSP ring handling - Add framework for using BACO with runtime pm to save power - Move core pci state handling out of the driver for pm ops - Allow guest power control in 1 VF case with SR-IOV - SR-IOV fixes - RAS fixes - Support for power metrics on renoir - Golden settings updates for gfx10 - Enable gfxoff on supported navi10 skus - Update MAINTAINERS amdkfd: - Clean up generational gfx code - Fixes for gfx10 - DIQ fixes - Share more code with amdgpu radeon: - PPC DMA fix - Register checker fixes for r1xx/r2xx - Misc cleanups From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191211223020.7510-1-alexander.deucher@amd.com
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDaniel Vetter4-8/+7
drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-13Merge tag 'drm-fixes-5.5-2019-12-12' of git://people.freedesktop.org/~agd5f/linux into drm-fixesDave Airlie27-117/+298
drm-fixes-5.5-2019-12-12: amdgpu: - DC fixes for renoir - Gfx8 fence flush align with mesa - Power profile fix for arcturus - Freesync fix - DC I2c over aux fix - DC aux defer fix - GPU reset fix - GPUVM invalidation semaphore fixes for PCO and SR-IOV - Golden settings updates for gfx10 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191212223211.8034-1-alexander.deucher@amd.com
2019-12-12drm/amdgpu: add invalidate semaphore limit for SRIOV in gmc10changzhu1-8/+21
It may fail to load guest driver in round 2 when using invalidate semaphore for SRIOV. So it needs to avoid using invalidate semaphore for SRIOV. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-12drm/amdgpu: add invalidate semaphore limit for SRIOV and picasso in gmc9changzhu1-20/+24
It may fail to load guest driver in round 2 or cause Xstart problem when using invalidate semaphore for SRIOV or picasso. So it needs avoid using invalidate semaphore for SRIOV and picasso. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-12drm/amdgpu: avoid using invalidate semaphore for picassochangzhu1-8/+20
It may cause timeout waiting for sem acquire in VM flush when using invalidate semaphore for picasso. So it needs to avoid using invalidate semaphore for piasso. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-12Revert "drm/amdgpu: dont schedule jobs while in reset"Alex Deucher1-4/+1
This reverts commit f2efc6e60089c99c342a6b7da47f1037e06c4296. This was fixed properly for 5.5, but came back via 5.4 merge into drm-next, so revert it again. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: fix license on Kconfig and MakefilesAlex Deucher7-4/+7
amdgpu is MIT licensed. Fixes: ec8f24b7faaf3d ("treewide: Add SPDX license identifier - Makefile/Kconfig") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: log when amdgpu.dc=1 but ASIC is unsupportedSimon Ser1-0/+3
This makes it easier to figure out whether the kernel parameter has been taken into account. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Harry Wentland <hwentlan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amd/display: include linux/slab.h where neededArnd Bergmann1-0/+2
Calling kzalloc() and related functions requires the linux/slab.h header to be included: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c: In function 'dcn21_ipp_create': drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:679:3: error: implicit declaration of function 'kzalloc'; did you mean 'd_alloc'? [-Werror=implicit-function-declaration] kzalloc(sizeof(struct dcn10_ipp), GFP_KERNEL); A lot of other headers also miss a direct include in this file, but this is the only one that causes a problem for now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: fix JPEG instance checking when ctx initLeo Liu1-1/+1
Use proper structure. Fixes: 0388aee766376ed ("drm/amdgpu: use the JPEG structure for general driver support") Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: fix VCN2.x number of irq typesLeo Liu2-2/+2
The JPEG irq type has been moved to its own structure Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin1-0/+2
add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2 Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin1-0/+2
add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2 Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: enable gfxoff feature for navi10 asicKevin Wang1-1/+19
enable gfxoff feature for some navi10 asics Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin1-0/+1
add registers: mmSPI_CONFIG_CNTL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin1-0/+1
add registers: mmSPI_CONFIG_CNTL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amd/powerplay: enable pp one vf mode for vega10Yintian Tao17-298/+350
Originally, due to the restriction from PSP and SMU, VF has to send message to hypervisor driver to handle powerplay change which is complicated and redundant. Currently, SMU and PSP can support VF to directly handle powerplay change by itself. Therefore, the old code about the handshake between VF and PF to handle powerplay will be removed and VF will use new the registers below to handshake with SMU. mmMP1_SMN_C2PMSG_101: register to handle SMU message mmMP1_SMN_C2PMSG_102: register to handle SMU parameter mmMP1_SMN_C2PMSG_103: register to handle SMU response v2: remove module parameter pp_one_vf v3: fix the parens v4: forbid vf to change smu feature v5: use hwmon_attributes_visible to skip sepicified hwmon atrribute v6: change skip condition at vega10_copy_table_to_smc Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: Added RAS UMC error query support for ArcturusJohn Clements3-16/+74
Updated UMC 6.1 function set to support UMC 6.1.1 and 6.1.2 devices Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amd/powerplay: correct the value retrieved through GPU_LOAD sensor interfaceXiaomeng Hou1-1/+1
the unit of variable AverageGfxActivity defined in smu12 metrics struct is centi, so the retrieved value should be divided by 100 before return. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amd/powerplay: implement the get_enabled_mask callback for smu12Xiaomeng Hou3-0/+33
implement sensor interface of feature mask for debugfs. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amd/powerplay: implement interface to retrieve clock freq for renoirXiaomeng Hou3-0/+73
implement smu12 get_clk_freq interface to get clock frequency like MCLK/SCLK. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amd/powerplay: implement interface to retrieve gpu temperature for renoirXiaomeng Hou1-0/+22
add sensor interface of get gpu temperature for debugfs. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amd/powerplay: clear VBIOS scratchs on baco exit V2Evan Quan1-0/+7
This is needed for coming asic init on performing gpu reset. V2: use non-asic specific programing way Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: avoid using invalidate semaphore for picassochangzhu1-8/+20
It may cause timeout waiting for sem acquire in VM flush when using invalidate semaphore for picasso. So it needs to avoid using invalidate semaphore for piasso. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: add condition to enable baco for ras recoveryLe Ma1-10/+8
Switch to baco reset method for ras recovery if the PMFW supported. If not, keep the original reset method. v2: revise the condition Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.