aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2021-10-19drm/amd/display: Disable dpstreamclk, symclk32_se, and symclk32_leJake Wang3-11/+130
[Why & How] Disable dpstreamclk, symclk32_se, and symclk32_le when not in use. Reviewed-by: Ariel Bernstein <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Increase watermark latencies for DCN3.1Nikola Cornij1-8/+8
[why] The original latencies were causing underflow in some modes [how] Replace with the up-to-date watermark values based on new measurments Reviewed-by: Ahmad Othman <ahmad.othman@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: increase Z9 latency to workaround underflow in Z9Eric Yang1-2/+2
[Why] Z9 latency is higher than when we originally tuned the watermark parameters, causing underflow. Increasing the value until the latency issues is resolved. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Require immediate flip support for DCN3.1 planesNicholas Kazlauskas1-0/+7
[Why] Immediate flip can be enabled dynamically and has higher BW requirements when validating which voltage mode to use. If we validate when it's not set then potentially DCFCLK will be too low and we will underflow. [How] DM always requires support so always require it as part of DML input parameters. This can't be enabled unconditionally on older ASIC because it blocks some expected modes so only target DCN3.1 for now. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Disable dsc root clock when not being usedJake Wang5-3/+129
[Why & How] Disable root clock for dsc when not being used. Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Add missing PSR stateMikita Lipski2-0/+3
[why] PSR_STATE2b was introduced on DMCUB side, but not on the driver side, which caused convert_psr_state helper function to return PSR_STATE_INVALID. That caused visual lagging during state transition. [how] Add PSR_STATE2b to dc_psr_state and convert_psr_state Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Fix prefetch bandwidth calculation for DCN3.1Nicholas Kazlauskas1-3/+3
[Why] Prefetch BW calculated is lower than the DML reference because of a porting error that's excluding cursor and row bandwidth from the pixel data bandwidth. [How] Change the dml_max4 to dml_max3 and include cursor and row bandwidth in the same calculation as the rest of the pixel data during vactive. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Fix DP2 SE and LE SYMCLK selection for B0 PHYHansen1-0/+17
Remap phyd32clk to PHYF and PHYG for B0, PHYC and PHYD are unused Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1Nikola Cornij1-1/+1
[why] The requirement is that image width up to 4096 shall be supported Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Removed power down on boot from DCN31Lai, Derek1-43/+0
[Why] Error message on Linux when booting. [How] Removed power down on boot from DCN31 HW init to match DCN10 HW init. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Derek Lai <derek.lai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Validate plane rects before useAric Cyr1-0/+5
[Why] Calculation of scaling ratio can result in a crash due to zero'd src or dst plane rects. [How] Validate that src and dst rects are valid before using for scaling calculations. Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: correct apg audio channel enable golden valueWenjing Liu1-1/+1
Hardware team has recommended to generically hard code this register to 0xFF as part of the effort to eventually remove this control. However we set it to 0xF instead. This causes 4 of audio 8ch to be muted. Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: do not compare integers of different widthsJosip Pavic1-2/+2
[Why & How] Increase width of some variables to avoid comparing integers of different widths Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Clean Up VPG Low Mem PowerMichael Strauss3-14/+13
[WHAT] One of the current VPG power on calls is unnecessary Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: add DP2.0 debug option to set MST_EN for SST streamWenjing Liu2-1/+7
[why] Some DP2.0 RX requires us to set MST_EN even for SST configuration. We added this debug option so we can configure this temporary workaround for the RX. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Do not skip link training on DP quick hot plugJimmy Kizito3-5/+8
[Why] When rapidly plugging and unplugging a DP sink, detection link training can be mistakenly skipped. This is due to the hotplug processing occurring before the encoder assignment logic has had a chance to process the removal of a stream. The encoder that would be used for detection link training is then erroneously reported as already in use and detection link training is skipped. [How] During hot plug processing, only determine a link encoder to be unavailable for a particular link if it has been assigned to a different link. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Clear encoder assignment for copied streamsJimmy Kizito1-0/+4
[Why] When copying a stream, the encoder assigned to it is copied too. Encoder assignment should only happen when executing the encoder assignment function link_encs_assign(). [How] Clear the link encoder pointer for copied stream. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Disable dpp root clock when not being usedJake Wang2-2/+44
[Why & How] Disable root clock for dpp when not being used. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Fully switch to dmub for all dcn21 asicsRoman Li1-2/+1
[Why] On renoir usb-c port stops functioning on resume after f/w update. New dmub firmware caused regression due to conflict with dmcu. With new dmub f/w dmcu is superseded and should be disabled. [How] - Disable dmcu for all dcn21. Check dmesg for dmub f/w version. The old firmware (before regression): [drm] DMUB hardware initialized: version=0x00000001 All other versions require this patch for renoir. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/amdgpu: Do irq_fini_hw after ip_fini_earlyYuBiao Wang1-2/+2
[Why] drm_irq_uninstall is called in irq_fini_hw so that irq is disabled in sw stage. SMU (and maybe other IP blocks) fini_hw will call irq_put for cleanup and the whole cleanup process will be skipped because of drm->irq_enable = false. [How] Move ip_fini_early before irq_fini_hw. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amdkfd: map gpu hive id to xgmi connected cpuJonathan Kim1-1/+18
ROCr needs to be able to identify all devices that have direct access to fine grain memory, which should include CPUs that are connected to GPUs over xGMI. The GPU hive ID can be mapped onto the CPU hive ID since the CPU is part of the hive. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amdgpu: load PSP RL in resume pathTao Zhou1-0/+6
Some registers' access will fail without PSP RL after resume. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amdkfd: Fix an inappropriate error handling in allloc memory of gpuLang Yu1-1/+1
We should unreference a gem object instead of an amdgpu bo here. Fixes: fd9a9f8801de ("drm/amdgpu: Use GEM obj reference for KFD BOs") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdgpu/psp: add some missing cases to psp_check_pmfw_centralized_cstate_managementAlex Deucher1-1/+2
Missed a few asics. v2: update comment Fixes: 82d05736c47b19 ("drm/amdgpu/amdgpu_psp: convert to IP version checking") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdgpu/swsmu: fix is_support_sw_smu() for VEGA20Alex Deucher1-0/+4
VEGA20 is 11.0.2, but it's handled by powerplay, not swsmu. Fixes: a8967967f6a554 ("drm/amdgpu/amdgpu_smu: convert to IP version checking") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdkfd: unregistered svm range not overlap with TTM rangePhilip Yang3-7/+94
When creating unregistered new svm range to recover retry fault, avoid new svm range to overlap with ranges or userptr ranges managed by TTM, otherwise svm migration will trigger TTM or userptr eviction, to evict user queues unexpectedly. Change helper amdgpu_ttm_tt_affect_userptr to return userptr which is inside the range. Add helper svm_range_check_vm_userptr to scan all userptr of the vm, and return overlap userptr bo start, last. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdgpu: fix out of bounds writeThelford Williams1-1/+1
Size can be any value and is user controlled resulting in overwriting the 40 byte array wr_buf with an arbitrary length of data from buf. Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdgpu/smu11: fix firmware version check for vangoghAlex Deucher1-1/+1
Was missed in the conversion to IP version checking. Fixes: af3b89d3a639d5 ("drm/amdgpu/smu11.0: convert to IP version checking") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdkfd: fix resume error when iommu disabled in PicassoYifan Zhang1-0/+1
When IOMMU disabled in sbios and kfd in iommuv2 path, IOMMU resume failure blocks system resume. Don't allow kfd to use iommu v2 when iommu is disabled. Reported-by: youling <youling257@gmail.com> Tested-by: youling <youling257@gmail.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdkfd: fix boot failure when iommu is disabled in Picasso.Yifan Zhang2-4/+3
When IOMMU disabled in sbios and kfd in iommuv2 path, iommuv2 init will fail. But this failure should not block amdgpu driver init. Reported-by: youling <youling257@gmail.com> Tested-by: youling <youling257@gmail.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdkfd: handle svm partial migration cpages 0Philip Yang1-34/+52
migrate_vma_setup may return cpages 0, means 0 page can be migrated, treat this as error case to skip the rest of vma migration steps. Change svm_migrate_vma_to_vram and svm_migrate_vma_to_ram to return the number of pages migrated successfully or error code. The caller add up all the successful migration pages and update prange->actual_loc only if the total migrated pages is not 0. This also removes the warning message "VRAM BO missing during validation" if migration cpages is 0. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdkfd: ratelimited svm debug messagesPhilip Yang2-21/+30
No function change, use pr_debug_ratelimited to avoid per page debug message overflowing dmesg buf and console log. use dev_err to show error message from unexpected situation, to provide clue to help debug without enabling dynamic debug log. Define dev_fmt to output function name in error message. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amd/pm: Fix incorrect power limit readback in smu11 if POWER_SOURCE_DCDarren Powell1-4/+5
when smu->adev->pm.ac_power == 0, message parameter with bit 16 set is saved to smu->current_power_limit. Fixes: 0cb4c62125a9 ("drm/amd/pm: correct power limit setting for SMU V11)" Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13amdgpu/pm: (v2) add limit_type to (pptable_funcs)->set_power_limit signatureDarren Powell8-19/+39
v2 add check for SMU_DEFAULT_PPT_LIMIT v1 modify (pptable_funcs)->set_power_limit signature modify smu11 set_power_limit signature (arcturus, navi10, sienna_cichlid) modify smu13 set_power_limit signature (aldabaran) modify vangogh_set_power_limit signature (vangogh) === Test === sudo bash AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_show_power_cap.log cp $LOGFILE{,.old} lspci -nn | grep "VGA\|Display" > $LOGFILE FILES=" power1_cap power2_cap" for f in $FILES do if test -f "$HWMON_DIR/$f"; then echo === $f === >> $LOGFILE cat $HWMON_DIR/$f >> $LOGFILE RESTORE_VALUE=`cat $HWMON_DIR/$f` 2>&1 >> $LOGFILE echo RESTORE_VALUE $RESTORE_VALUE >> $LOGFILE echo 120000000 > $HWMON_DIR/$f sleep 3 cat $HWMON_DIR/$f >> $LOGFILE echo $RESTORE_VALUE > $HWMON_DIR/$f sleep 3 cat $HWMON_DIR/$f >> $LOGFILE else echo === $f === >> $LOGFILE echo File Not Found >> $LOGFILE fi done cat $LOGFILE Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdgpu: Fix RAS page retirement with mode2 reset on AldebaranMukul Joshi1-12/+21
During mode2 reset, the GPU is temporarily removed from the mgpu_info list. As a result, page retirement fails because it cannot find the GPU in the GPU list. To fix this, create our own list of GPUs that support MCE notifier based page retirement and use that list to check if the UMC error occurred on a GPU that supports MCE notifier based page retirement. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdgpu: Enable RAS error injection after mode2 reset on AldebaranMukul Joshi1-0/+2
Add the missing call to re-enable RAS error injections on the Aldebaran mode2 reset code path. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amd/display: fix null pointer deref when plugging in displayAurabindo Pillai1-1/+2
[Why&How] When system boots in headless mode, connecting a 4k display creates a null pointer dereference due to hubp for a certain plane being null. Add a condition to check for null hubp before dereferencing it. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amd/display: Fix surface optimization regression on CarrizoNicholas Kazlauskas1-2/+13
[Why] DCE legacy optimization path isn't well tested under new DC optimization flow which can result in underflow occuring when initializing X11 on Carrizo. [How] Retain the legacy optimization flow for DCE and keep the new one for DCN to satisfy optimizations being correctly applied for ASIC that can support it. Fixes: 34316c1e561db0 ("drm/amd/display: Optimize bandwidth on following fast update") Reported-by: Tom St Denis <tom.stdenis@amd.com> Tested-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amd/display: Enable PSR by default on newer DCNNicholas Kazlauskas2-3/+19
[Why] For optimal power savings on panels that can support it. This was previously left disabled by default because of issues with compositors that do not pageflip and scan out directly to the frontbuffer. For these compositors we now have detection methods that wait for x number of pageflips after a full update - triggered by a buffer or format change typically. This may introduce bugs or new cases not tested by users so this is only currently targeting newer DCN. [How] Add code in DM to set PSR state by default for newer DCN while falling back to the feature mask for older. Add a global debug flag that can be set to disable it for either. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdgpu: enable display for cyan skillfishLang Yu1-2/+1
Display support for cyan skillfish is ready now. Enable it! Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13amd/display: check cursor plane matches underlying planeSimon Ser1-15/+34
The current logic checks whether the cursor plane blending properties match the primary plane's. However that's wrong, because the cursor is painted on all planes underneath. If the cursor is over the primary plane and the overlay plane, it's painted on both pipes. Iterate over the CRTC planes and check their scaling match the cursor's. v4: fix typo in commit message (Harry) Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13amd/amdkfd: remove svms declaration to avoid werrorAlex Sierra1-6/+5
svm_range_list svms declaration removed to avoid werror when CONFIG_HSA_AMD_SVM is not enabled. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdkfd: fix KFDSVMRangeTest.PartialUnmapSysMemTest failsYifan Zhang1-0/+5
[ RUN ] KFDSVMRangeTest.PartialUnmapSysMemTest /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:245: Failure Value of: (hsaKmtAllocMemory(m_Node, m_Size, m_Flags, &m_pBuf)) Actual: 1 Expected: HSAKMT_STATUS_SUCCESS Which is: 0 /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:248: Failure Value of: (hsaKmtMapMemoryToGPUNodes(m_pBuf, m_Size, __null, mapFlags, 1, &m_Node)) Actual: 1 Expected: HSAKMT_STATUS_SUCCESS Which is: 0 /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:306: Failure Expected: ((void *)__null) != (ptr), actual: NULL vs NULL Segmentation fault (core dumped) [ ] Profile: Full Test [ ] HW capabilities: 0x9 kernel log: [ 102.029150] ret_from_fork+0x22/0x30 [ 102.029158] ---[ end trace 15c34e782714f9a3 ]--- [ 3613.603598] amdgpu: Address: 0x7f7149ccc000 already allocated by SVM [ 3613.610620] show_signal_msg: 27 callbacks suppressed These is race with deferred actions from previous memory map changes (e.g. munmap).Flush pending deffered work to avoid such case. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdkfd: export svm_range_list_lock_and_flush_workYifan Zhang2-1/+2
export svm_range_list_lock_and_flush_work to make other kfd parts be able to sync svm_range_list. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdkfd: avoid conflicting address mappingsAlex Sierra2-17/+75
[Why] Avoid conflict with address ranges mapped by SVM mechanism that try to be allocated again through ioctl_alloc in the same process. And viceversa. [How] For ioctl_alloc_memory_of_gpu allocations Check if the address range passed into ioctl memory alloc does not exist already in the kfd_process svms->objects interval tree. For SVM allocations Look for the address range into the interval tree VA from the VM inside of each pdds used in a kfd_process. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-13drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12Alex Deucher3-1/+36
It's used internally by firmware. Using it in the driver could conflict with firmware. v2: squash in fix for navi1x (Alex) Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-11drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12Alex Deucher1-9/+12
It's used internally by firmware. Using it in the driver could conflict with firmware. Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-11drm/amdgpu: query default sclk from smu for cyan_skillfishLang Yu1-5/+12
Query default sclk instead of hard code. Signed-off-by: Lang Yu <lang.yu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-11Merge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-6/+19
drm-misc-next for v5.16: UAPI Changes: - Allow empty drm leases for creating separate GEM namespaces. Cross-subsystem Changes: - Slightly rework dma_buf_poll. - Add dma_resv_for_each_fence_unlocked to iterate, and use it inside the lockless dma-resv functions. Core Changes: - Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing. - Add more DP2 headers. - fix CONFIG_FB dependency in fb_helper. - Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888. - Fix crash on a 0 or invalid EDID. Driver Changes: - Apply and revert DRM_MODESET_LOCK_ALL_BEGIN. - Add mode_valid to ti-sn65dsi86 bridge. - Support multiple syncobjs in v3d. - Add R8, RGB332 and RGB888 pixel formats to GUD. - Use devm_add_action_or_reset in dw-hdmi-cec. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Wed 06 Oct 2021 20:48:12 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2602f4e9-a8ac-83f8-6c2a-39fd9ca2e1ba@linux.intel.com
2021-10-08drm/amd/display: fix duplicated inclusionkernel test robot1-1/+0
Generated by: scripts/checkincludes.pl Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.