aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-12-01Merge tag 'tilcdc-4.10' of https://github.com/jsarha/linux into drm-nextDave Airlie1-0/+1
tilcdc changes for v4.10 * tag 'tilcdc-4.10' of https://github.com/jsarha/linux: (23 commits) drm/tilcdc: fix parsing of some DT properties drm/tilcdc: Enable frame done irq and functionality for LCDC rev 1 drm/tilcdc: Configure video mode to HW in enable() not in mode_set_nofb() drm/tilcdc: Load palette at the end of mode_set_nofb() drm/tilcdc: Add timeout wait for palette loading to complete drm/tilcdc: Enable palette loading for revision 2 LCDC too drm/tilcdc: Fix load mode bit-field setting in tilcdc_crtc_enable() drm/tilcdc: Add tilcdc_write_mask() to tilcdc_regs.h drm/tilcdc: Fix tilcdc_crtc_create() return value handling drm/tilcdc: implement palette loading for rev1 drm/tilcdc: Enable sync lost error and recovery handling for rev 1 LCDC drm/tilcdc: Add drm bridge support for attaching drm bridge drivers drm/bridge: Add ti-tfp410 DVI transmitter driver dt-bindings: Move "ti,tfp410.txt" from display/ti to display/bridge drm/tilcdc: Recover from sync lost error flood by resetting the LCDC drm/tilcdc: Fix race from forced shutdown of crtc in unload drm/tilcdc: Use unload to handle initialization failures drm/tilcdc: Stop using struct drm_driver load() callback drm/tilcdc: Remove obsolete drm_connector_register() calls drm/tilcdc: Correct misspelling in error message ...
2016-11-30drm/bridge: Add ti-tfp410 DVI transmitter driverJyri Sarha1-0/+1
Add very basic ti-tfp410 DVI transmitter driver. The only feature separating this from a completely dummy bridge is the EDID read support trough DDC I2C. Even that functionality should be in a separate generic connector driver. However, because of missing DRM infrastructure support the connector is implemented within the bridge driver. Some tfp410 HW specific features may be added later if needed, because there is a set of registers behind i2c if it is connected. This implementation is tested against my new tilcdc bridge support and it works with BeagleBone DVI-D Cape Rev A3. A DT binding document is also updated. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Rob Herring <robh@kernel.org>
2016-11-24drm: bridge: add DesignWare HDMI I2S audio supportKuninori Morimoto1-0/+1
Current dw-hdmi is supporting sound via AHB bus, but it has I2S audio feature too. This patch adds I2S audio support to dw-hdmi. This HDMI I2S is supported by using ALSA SoC common HDMI encoder driver. Tested-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/8737j2bxba.wl%kuninori.morimoto.gx@renesas.com
2016-10-26drm/bridge: add Silicon Image SiI8620 driverAndrzej Hajda1-0/+1
SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0. It is controlled via I2C bus. Its interaction with other devices in video pipeline is performed mainly on HW level. The only interaction it does on device driver level is filtering-out unsupported video modes, it exposes drm_bridge interface to perform this operation. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1476085157-5266-1-git-send-email-a.hajda@samsung.com
2016-10-10drm/bridge: Add RGB to VGA bridge supportMaxime Ripard1-0/+1
Some boards have an entirely passive RGB to VGA bridge, based on DACs implemented by resistor ladders. Those might or might not have an i2c bus routed to the VGA connector in order to access the screen EDIDs. Add a bridge that doesn't do anything but expose the modes available on the screen, either based on the EDIDs if available, or based on the XGA standards. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com
2016-07-17drm/bridge: tc358767: Add DPI to eDP bridge driverAndrey Gusakov1-0/+1
Add a drm_bridge driver for the Toshiba TC358767 DPI/DSI to eDP/DP bridge. Currently only DPI input with 24-bit RGB is supported. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Archit Taneja <architt@codeaurora.org>
2016-07-13drm/i2c: adv7511: Move to bridge folderArchit Taneja1-0/+1
The driver has been converted to use drm_bridge instead of drm_i2c_slave_encoder. We can now move it to the bridge folder. Create a separate folder since we already have a couple of files and expect more when we support audio and ADV7533. Rename the driver to adv7511_drv.c. This will come in handy later when the driver module will need to be built from multiple object files. Signed-off-by: Archit Taneja <architt@codeaurora.org>
2016-06-20drm/bridge: Add sii902x driverBoris Brezillon1-0/+1
Add basic support for the sii902x RGB -> HDMI bridge. This driver does not support audio output yet. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> --- Changes in v8: - remove useless headers inclusion - fix macro names (s/SIL/SII) - drop unneeded hotplug_work field from struct sii902x - drop drm_connector_unregister() call in the ->destroy() method - add a timeout when polling a register value Changes in v6: - use HDMI_INFOFRAME_SIZE(AVI) - fix reset_gpio initialization - reduce the reset time based on Ming feedback Changes in v5: - drop the best_encoder() implementation Changes in v4: - make reset GPIO optional - only support attaching to DRM devices supporting atomic updates Changes in v3: - fix get_modes() implementation to avoid turning the screen in power save mode - rename the driver (sil902x -> sii902x) Changes in v2: - fix errors reported by the kbuild robot fixup! drm: bridge: Add sii902x driver
2016-05-12drm/bridge: Add Analogix anx78xx supportEnric Balletbo i Serra1-0/+1
Although there are other chips from the same family that can reuse this driver, at the moment we only tested ANX7814 chip. The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices. This driver adds initial support for HDMI to DP pass-through mode. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Thierry Reding <treding@nvidia.com> [treding@nvidia.com: coding style, propagate regulator_get() errors] Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-05drm: bridge: analogix/dp: split exynos dp driver to bridge directoryYakir Yang1-0/+1
Split the dp core driver from exynos directory to bridge directory, and rename the core driver to analogix_dp_*, rename the platform code to exynos_dp. Beside the new analogix_dp driver would export six hooks. "analogix_dp_bind()" and "analogix_dp_unbind()" "analogix_dp_suspned()" and "analogix_dp_resume()" "analogix_dp_detect()" and "analogix_dp_get_modes()" The bind/unbind symbols is used for analogix platform driver to connect with analogix_dp core driver. And the detect/get_modes is used for analogix platform driver to init the connector. They reason why connector need register in helper driver is rockchip drm haven't implement the atomic API, but Exynos drm have implement it, so there would need two different connector helper functions, that's why we leave the connector register in helper driver. Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-24drm/bridge: dw-hdmi: Use dashes in filenamesThierry Reding1-2/+2
For consistency with other drivers, use dashes instead of underscores in filenames. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-09drm: bridge/dw_hdmi-ahb-audio: add audio driverRussell King1-0/+1
Add ALSA based HDMI AHB audio driver for dw_hdmi. The only buffer format supported by the hardware is its own special IEC958 based format, which is not compatible with any ALSA format. To avoid doing too much data manipulation within the driver, we support only ALSAs IEC958 LE and 24-bit PCM formats for 2 to 6 channels, which we convert to its hardware format. A more desirable solution would be to have this conversion in userspace, but ALSA does not appear to allow such transformations outside of libasound itself. Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-14drm/bridge: Add vendor prefixesThierry Reding1-2/+2
Use vendor prefixes for Kconfig symbols and filenames. This should make it easier to identify the various bridge drivers and to organize the directory. v2: fix object name for dw-hdmi (Fabio Estevam) Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-24drm/bridge: Add I2C based driver for ps8622/ps8625 bridgeVincent Palatin1-0/+1
This patch adds drm_bridge driver for parade DisplayPort to LVDS bridge chip. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> [treding@nvidia.com: break cyclic dependency, add KMS helper dependency] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-07drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmiAndy Yan1-0/+1
the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-03-24drm/bridge: Add PTN3460 bridge driverSean Paul1-0/+3
This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS bridge chip. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.