aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_crtc.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-28Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-3/+6
Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
2018-10-05drm: fix use of freed memory in drm_mode_setcrtcTomi Valkeinen1-3/+7
drm_mode_setcrtc() retries modesetting in case one of the functions it calls returns -EDEADLK. connector_set, mode and fb are freed before retrying, but they are not set to NULL. This can cause drm_mode_setcrtc() to use those variables. For example: On the first try __drm_mode_set_config_internal() returns -EDEADLK. connector_set, mode and fb are freed. Next retry starts, and drm_modeset_lock_all_ctx() returns -EDEADLK, and we jump to 'out'. The code will happily try to release all three again. This leads to crashes of different kinds, depending on the sequence the EDEADLKs happen. Fix this by setting the three variables to NULL at the start of the retry loop. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180917110054.4053-1-tomi.valkeinen@ti.com
2018-09-14drm: Differentiate the lack of an interface from invalid parameterChris Wilson1-2/+2
If the ioctl is not supported on a particular piece of HW/driver combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily distinguished from both the lack of the ioctl and from a regular invalid parameter. v2: Across all the kms ioctls we had a mixture of reporting EINVAL, ENODEV and a few ENOTSUPP (most where EINVAL) for a failed drm_core_check_feature(). Update everybody to report ENOTSUPP. v3: ENOTSUPP is an internal errno! It's value (524) does not correspond to a POSIX errno, the one we want is ENOTSUP. However, uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says "ENOTSUP and EOPNOTSUPP have the same value on Linux, but according to POSIX.1 these error values should be distinct." so use EOPNOTSUPP as its equivalent. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
2018-09-09drm: drop drmP.h include from drm_crtc.cDaniel Vetter1-1/+4
This is starting to become easy! v2: Compiles now, with drm/drm_util.h extracted. v3: Fix up commit message (Sam Ravnborg) Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-4-daniel.vetter@ffwll.ch
2018-07-13drm: Skip __drm_mode_set_config_internal() on atomic driversVille Syrjälä1-5/+10
Everything (apart from the actual ->set_config() call) __drm_mode_set_config_internal() does is now useless on atomic drivers. So let's just skip all the foreplay. v2: Use drm_drv_uses_atomic_modeset() (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180705190010.19836-1-ville.syrjala@linux.intel.com
2018-07-03drm: Remove unecessary dma_fence_opsDaniel Vetter1-7/+0
dma_fence_default_wait is the default now, same for the trivial enable_signaling implementation. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180503142603.28513-7-daniel.vetter@ffwll.ch
2018-07-02drm: Use drm_crtc_mask()Ville Syrjälä1-2/+2
Use drm_crtc_mask() where appropriate. Mostly performed with coccinelle: @@ @@ - (1<<drm_crtc_index( + drm_crtc_mask( ...) - ) @@ @@ - 1<<drm_crtc_index( + drm_crtc_mask( ...) @@ @@ - BIT(drm_crtc_index( + drm_crtc_mask( ...) - ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-2-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-06-18drm: Add checks for atomic_[duplicate/destroy]_state with atomic driversHaneen Mohammed1-0/+4
This patch add checks for atomic_[duplicate/destroy]_state of drm_[connector/crtc/plane]_funcs for atomic drivers in the relevant drm_*_init functions since these callback are mandatory for atomic drivers. Update the kerneldoc comments for those callbacks. Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180525012555.GA8448@haneen-vb
2018-06-15drm: Print bad user modesVille Syrjälä1-1/+3
Print out the modeline when we reject a bad user mode. Avoids having to guess why it was rejected. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-2-ville.syrjala@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2018-06-11drm: Stop updating plane->crtc/fb/old_fb on atomic driversVille Syrjälä1-2/+6
Stop playing around with plane->crtc/fb/old_fb with atomic drivers. Make life a lot simpler when we don't have to do the magic old_fb vs. fb dance around plane updates. That way we can't risk plane->fb getting out of sync with plane->state->fb and we're less likely to leak any refcounts as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-14-ville.syrjala@linux.intel.com Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-05-25drm: Add local 'plane' variable for tmp->primaryVille Syrjälä1-7/+12
Clean up the ugly tmp->primary-> stuff in __drm_mode_set_config_internal() with a local plane variable. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-13-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-05-11drm: Handle aspect ratio info in legacy modeset pathAnkit Nautiyal1-0/+9
If the user-space does not support aspect-ratio, and requests for a modeset with mode having aspect ratio bits set, then the given user-mode must be rejected. Secondly, while preparing a user-mode from kernel mode, the aspect-ratio info must not be given, if aspect-ratio is not supported by the user. This patch: 1. rejects the modes with aspect-ratio info, during modeset, if the user does not support aspect ratio. 2. does not load the aspect-ratio info in user-mode structure, if aspect ratio is not supported. 3. adds helper functions for determining if aspect-ratio is expected in user-mode and for allowing/disallowing the aspect-ratio, if its not expected. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: Addressed review comments from Ville: Do not corrupt the current crtc state by updating aspect-ratio on the fly. V4: rebase V5: As suggested by Ville, rejected the modeset calls for modes with aspect ratio, if the user does not set aspect-ratio cap. V6: Used the helper functions for determining if aspect-ratio is expected in the user-mode. V7: rebase V8: rebase V9: rebase V10: Modified the commit-message V11: rebase V12: Merged the patch for adding aspect-ratio helper functions with this patch. V13: Minor modifications as suggested by Ville. V14: Removed helper functions, as they were used only once in legacy modeset path, as suggested by Daniel Vetter. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-8-git-send-email-ankit.k.nautiyal@intel.com
2018-05-03Revert 190c462d5be19ba622a82f5fd0625087c870a1e6..bf3012ada1b2222e770de5c35c1bb16f73b3a01d"Daniel Vetter1-0/+7
I shouldn't have pushed this, CI was right - I failed to remove the BUG_ON(!ops->wait); Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-05-03drm: Remove unecessary dma_fence_opsDaniel Vetter1-7/+0
dma_fence_default_wait is the default now, same for the trivial enable_signaling implementation. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-8-daniel.vetter@ffwll.ch
2018-03-29drm: Use plane->state->fb over plane->fbVille Syrjälä1-2/+9
Stop looking at plane->fb on atomic drivers. Use plane->state->fb instead. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-9-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-03-29drm: Adjust whitespace for legibilityVille Syrjälä1-1/+3
Add a bit of whitespace here and there to make the code look a bit more structured. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-7-ville.syrjala@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-03-29drm: Add local 'plane' variable for primary/cursor planesVille Syrjälä1-13/+19
Make the code a bit more readable by storing the plane pointer in a local variable rather than having to do crtc->{primary,cursor} all the time. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-6-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-03-29drm: Clear crtc->primary->crtc when disabling the crtc via setcrtc()Ville Syrjälä1-1/+1
Keep the primary->crtc in sync with the state->crtc (also with primary->fb and state->fb) when disabling the crtc (and thus also the primary) via setcrtc(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-4-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-02-26drm: Check that the plane supports the request format+modifier comboVille Syrjälä1-4/+6
Currently we only check that the plane supports the pixel format of the fb we're about to feed to it. Extend it to check also the modifier, and more specifically that the combination of the format and modifier is supported. Cc: dri-devel@lists.freedesktop.org Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-8-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-01-29drm/modes: Provide global mode_valid hookVille Syrjälä1-1/+1
Allow drivers to provide a device wide .mode_valid() hook in addition to the already existing crtc/encoder/bridge/connector hooks. This can be used to validate device/driver wide constraings without having to add those to the other hooks. And since we call this hook also for user modes later on in the modeset we don't have to worry about anything the hook has already rejected. I also have some further ideas for this hook. Eg. we could replace the drm_mode_set_crtcinfo(HALVE_V) call in drm_mode_convert_umode()/etc. with a driver specific variant via this hook. At least on i915 we would like to pass CRTC_STEREO_DOUBLE to that function instead, and then we could safely use the crtc_ timings in all our .mode_valid() hooks, which would allow us to reuse those hooks for validating the adjusted_mode during a modeset. v2: Fix the language fails in the kernel docs (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-10-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-01-29drm: Warn if plane/crtc/encoder/connector index exceeds our 32bit bitmasksVille Syrjälä1-0/+4
We use 32bit bitmasks to track planes/crtcs/encoders/connectors. Naturally we can only do that if the index of those objects stays below 32. Issue a warning whenever we exceed that limit, hopefully prompting someone to fix the problem. For connectors the issue is a bit more complicated as they can be created/destroyed at runtime due to MST. So the problem is no longer a purely theoretical programmer error. As the connector indexes are allocated via ida, we can simply limit the maximum value the ida is allowed to hand out. The error handling is already in place. v2: Return an error to the caller (Harry) v3: Print a debug message so that we know what happened (Maarten) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180125133020.23845-1-ville.syrjala@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2017-10-12drm: Pass struct drm_file * to __drm_mode_object_find [v2]Keith Packard1-4/+4
This will allow __drm_mode_object_file to be extended to perform access control checks based on the file in use. v2: Also fix up vboxvideo driver in staging [airlied: merging early as this is an API change] Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-09-13drm/crtc: Convert setcrtc ioctl locking to interruptible.Maarten Lankhorst1-3/+4
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle drm_modeset_backoff which can now fail by returning the error. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-7-maarten.lankhorst@linux.intel.com Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
2017-08-08drm: Handle properties in the core for atomic driversDaniel Vetter1-1/+1
The reason behind the original indirection through the helper functions was to allow existing drivers to overwrite how they handle properties. For example when a vendor-specific userspace had expectations that didn't match atomic. That seemed likely, since atomic is standardizing a _lot_ more of the behaviour of a kms driver. But 20 drivers later there's no such need at all. Worse, this forces all drivers to hook up the default behaviour, breaking userspace if they forget to do that. And it forces us to export a bunch of core function just for those helpers. And finally, these helpers are the last places using drm_atomic_legacy_backoff() and the implicit acquire_ctx. This patch here just implements the new behaviour and updates the docs. Follow-up patches will garbage-collect all the dead code. v2: Fixup docs even better! v3: Make it actually work ... v4: Drop the uses_atomic_modeset() checks from the previous patch again, since they're now moved up in the callchain. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> (v3) Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725120204.2107-1-daniel.vetter@ffwll.ch
2017-08-08drm: Don't update property values for atomic driversDaniel Vetter1-1/+1
Atomic drivers only use the property value store for immutable (i.e. can't be set by userspace, but the kernel can still adjust it) properties. The only tricky part is the removal of the update in drm_atomic_helper_update_legacy_modeset_state(). This was added in commit 8c10342cb48f3140d9abeadcfd2fa6625d447282 (tag: topic/drm-misc-2015-07-28) Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Jul 27 13:24:29 2015 +0200 drm/atomic: Update legacy DPMS state during modesets, v3. by copying it from the i915 code, where it was originally added in commit 68d3472047a572936551f8ff0b6f4016c5a1fdef Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Sep 6 22:08:35 2012 +0200 drm/i915: update dpms property in set_mode for the legacy modeset code. The reason we needed this hack was that i915 didn't yet set DRIVER_ATOMIC, and we checked for that instead of the newer-ish drm_drv_uses_atomic_modeset(), which avoids such troubles. With the correct feature checks this isn't needed anymore at all. Also make sure that drivers don't accidentally get this wrong by making the exported version of drm_object_property_get_value() only work for legacy drivers. Only gma500 uses it anyway. v2: Fixup the uses_atomic_modeset() checks (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725120137.1903-1-daniel.vetter@ffwll.ch
2017-04-06drm: Take mode_config.mutex in setcrtc ioctlDaniel Vetter1-0/+2
Legacy drivers insist that we really take all the locks in this path, and the harm in doing so is minimal. v2: Like git add, it exists :( Fixes: 2ceb585a956c ("drm: Add explicit acquire ctx handling around ->set_config") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: Alex Deucher <alexdeucher@gmail.com> Reported-by: Alex Deucher <alexdeucher@gmail.com> Acked-and-tested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170406190654.6733-1-daniel.vetter@ffwll.ch
2017-03-29drm/atomic-helper: Remove the backoff hack from set_configDaniel Vetter1-1/+0
Another one bites the dust. Again let's not forget to remove the temporary hidden acquire_ctx assignment, now that we pass this all around explicitly it can go away again. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-20-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->set_configDaniel Vetter1-1/+1
Surprisingly a lot of legacy drivers roll their own, for runtime pm and because vmwgfx. Also make nouveau's set_config static while at it. Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
2017-03-29drm: Add explicit acquire ctx handling around ->set_configDaniel Vetter1-7/+19
Just the groundwork to have something to feed into ->set_config. Again we need a temporary hack to still fill out the legacy ctx in mode_config.acquire_ctx. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-18-daniel.vetter@ffwll.ch
2017-03-29drm: Restrict drm_mode_set_config_internal to non-atomic driversDaniel Vetter1-13/+21
This is another case where we really can't reconstruct a acquire ctx in any useful fashion because all the callers are legacy drivers. So like drm_plane_force_disable simply restrict it to non-atomic drivers so that it's clear we're ok with passing a NULL ctx. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-17-daniel.vetter@ffwll.ch
2017-03-29drm: simplify the locking in the GETCRTC ioctlDaniel Vetter1-3/+8
No need to grab both plane and crtc locks at the same time, we can do them one after the other. If userspace races it'll get what it deserves either way. This removes another user of drm_modeset_lock_crtc. There's only one left. v2: Make sure all access to primary->state is properly protected (Harry). Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170328070145.21520-1-daniel.vetter@ffwll.ch
2017-03-27drm/atomic: Introduce drm_atomic_helper_shutdownDaniel Vetter1-0/+7
The trouble here is that it does multiple atomic commits under one drm_modeset_lock_all, which breaks the behind-the-scenes acquire context magic that function pulls off. It's much better to have one overall atomic commit. That we still have multiple atomic commits prevents us from adding some pretty useful debug checks to the atomic machinery. Hence it is really a bad idea to call the legacy drm_crtc_force_disable_all() function. There's 2 atomic drivers using this still, nouveau and tinydrm. To fix this, introduce a new drm_atomic_helper_shutdown() by extracting the code from i915. While at it improve kernel-doc and catch future offenders by sprinkling a WARN_ON into the legacy function. We should probably move those into the legacy modeset helpers, too ... v2: Make it compile on arm drivers too (Noralf). v3: Correct kerneldoc to point at _disable_all(). Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Ben Skeggs <bskeggs@redhat.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch
2017-02-28drm: Introduce drm_framebuffer_{get,put}()Thierry Reding1-4/+4
For consistency with other reference counting APIs in the kernel, add drm_framebuffer_get() and drm_framebuffer_put() to reference count DRM framebuffers. Compatibility aliases are added to keep existing code working. To help speed up the transition, all the instances of the old functions in the DRM core are already replaced in this commit. The existing semantic patch for the DRM subsystem-wide conversion is extended to account for these new helpers. Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-5-thierry.reding@gmail.com
2017-02-28drm: Introduce drm_connector_{get,put}()Thierry Reding1-1/+1
For consistency with other reference counting APIs in the kernel, add drm_connector_get() and drm_connector_put() functions to reference count connectors. Compatibility aliases are added to keep existing code working. To help speed up the transition, all the instances of the old functions in the DRM core are already replaced in this commit. The existing semantic patch for mode object reference count conversion is extended for these new helpers. Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-4-thierry.reding@gmail.com
2017-02-28drm: Rename drm_mode_object_get()Thierry Reding1-1/+1
Subsequent patches will introduce reference counting APIs that are more consistent with similar APIs throughout the Linux kernel. These APIs use the _get() and _put() suffixes and will collide with this existing function. Rename the function to drm_mode_object_add() which is a slightly more accurate description of what it does. Also the kerneldoc for this function gives an indication that it's badly named because it doesn't actually acquire a reference to anything. Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-2-thierry.reding@gmail.com
2017-01-26drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/Daniel Vetter1-22/+1
The function operates on modes, not CRTCs. Also move it into drm_modes.[hc]. Spotted while reviewing CRTC docs. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-15-daniel.vetter@ffwll.ch
2017-01-25drm: Update kerneldoc for drm_crtc.[hc]Daniel Vetter1-0/+21
After going through all the trouble of splitting out parts from drm_crtc.[hc] and then properly documenting each I've entirely forgotten to show the same TLC for CRTCs themselves! Let's make amends asap. v2: Review from Eric. Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-01-25drm/kms-core: Use recommened kerneldoc for struct member refsDaniel Vetter1-3/+4
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Review from Eric. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch
2017-01-09drm: add more document for drm_crtc_from_index()Shawn Guo1-1/+4
Add a bit more document for function drm_crtc_from_index() to cross link it with drm_crtc_from_index(), and explain that the function is useful in vblank code. While at it, add cross link comment for drm_plane_from_index() as well. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483779131-19935-1-git-send-email-shawnguo@kernel.org
2016-12-30drm: add crtc helper drm_crtc_from_index()Shawn Guo1-0/+20
It adds a crtc helper drm_crtc_from_index() to find the registered CRTC with a given index, just like drm_plane_from_index(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483015290-16660-2-git-send-email-shawnguo@kernel.org
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä1-2/+2
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-13drm: Use atomic state for FB in legacy ioctlsDaniel Stone1-1/+4
If atomic state is available, use this to read the current plane in GetCrtc/GetPlane, rather than the legacy points. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161213181912.92904-1-daniels@collabora.com
2016-12-07drm/fence: add drm_crtc_create_fence()Gustavo Padovan1-1/+17
Instead of dealing with crtc details inside drm_atomic.c we should just export a function that creates a new crtc fence for us and use that. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481046437-18778-1-git-send-email-gustavo@padovan.org
2016-11-16drm/fence: add out-fences supportGustavo Padovan1-0/+2
Support DRM out-fences by creating a sync_file with a fence for each CRTC that sets the OUT_FENCE_PTR property. We use the out_fence pointer received in the OUT_FENCE_PTR prop to send the sync_file fd back to userspace. The sync_file and fd are allocated/created before commit, but the fd_install operation only happens after we know that commit succeed. v2: Comment by Rob Clark: - Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here. Comment by Daniel Vetter: - Add clean up code for out_fences v3: Comments by Daniel Vetter: - create DRM_MODE_ATOMIC_EVENT_MASK - userspace should fill out_fences_ptr with the crtc_ids for which it wants fences back. v4: Create OUT_FENCE_PTR properties and remove old approach. v5: Comments by Brian Starkey: - Remove extra fence_get() in atomic_ioctl() - Check ret before iterating on the crtc_state - check ret before fd_install - set fence_state to NULL at the beginning - check fence_state->out_fence_ptr before put_user() - change order of fput() and put_unused_fd() on failure - Add access_ok() check to the out_fence_ptr received - Rebase after fence -> dma_fence rename - Store out_fence_ptr in the drm_atomic_state - Split crtc_setup_out_fence() - return -1 as out_fence with TEST_ONLY flag v6: Comments by Daniel Vetter - Add prepare/unprepare_crtc_signaling() - move struct drm_out_fence_state to drm_atomic.c - mark get_crtc_fence() as static Comments by Brian Starkey - proper set fence_ptr fence_state array - isolate fence_idx increment - improve error handling v7: Comments by Daniel Vetter - remove prefix from internal functions - make out_fence_ptr an s64 pointer - degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail - fix doc issues - filter out OUT_FENCE_PTR == NULL and do not fail in this case - add complete_crtc_signalling() - krealloc fence_state on demand Comment by Brian Starkey - remove unused crtc_state arg from get_out_fence() v8: Comment by Brian Starkey - cancel events before check for !fence_state - convert a few lefovers u64 types for out_fence_ptr - fix memleak by assign fence_state earlier after realloc - proper accout num_fences in case of error v9: Comment by Brian Starkey - memset last position of fence_state after krealloc Comments by Sean Paul - pass install_fds in complete_crtc_signaling() instead of ret - put_user(-1, fence_ptr) when decoding props v10: Comment by Brian Starkey - remove unneeded num_fences increment on error path - kfree fence_state after installing fences fd v11: rebase against latest drm-misc v12: rebase again against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10) Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> (v10) [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org
2016-11-16drm/fence: add fence timeline to drm_crtcGustavo Padovan1-0/+38
Create one timeline context for each CRTC to be able to handle out-fences and signal them. It adds a few members to struct drm_crtc: fence_context, where we store the context we get from fence_context_alloc(), the fence seqno and the fence lock, that we pass in fence_init() to be used by the fence. v2: Comment by Daniel Stone: - add BUG_ON() to fence_to_crtc() macro v3: Comment by Ville Syrjälä - Use more meaningful name as crtc timeline name v4: Comments by Brian Starkey - Use even more meaninful name for the crtc timeline - add doc for timeline_name Comment by Daniel Vetter - use in-line style for comments - rebase after fence -> dma_fence rename v5: Comment by Daniel Vetter - Add doc for drm_crtc_fence_ops v6: Comment by Chris Wilson - Move fence_to_crtc to drm_crtc.c - Move export of drm_crtc_fence_ops to drm_crtc_internal.h - rebase against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v5) Reviewed-by: Sean Paul <seanpaul@chromium.org> (v5) Tested-by: Robert Foss <robert.foss@collabora.com> (v5) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479220628-10204-1-git-send-email-gustavo@padovan.org
2016-11-15drm: Move tile group code into drm_connector.cDaniel Vetter1-99/+0
And also put the overview section into the KMS Properties part of the docs, instead of randomly-placed within the helpers - this is part of the uabi. With this patch I think drm_crtc.[hc] is cleaned up and entirely documented. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-11-15drm: Extract drm_mode_config.[hc]Daniel Vetter1-460/+2
And shuffle the kernel-doc structure a bit since drm_crtc.[hc] now only contains CRTC-related functions and structures. v2: - rebase onto drm-misc - don't forget to move drm_mode_config_cleanup. - move 2 internal decls under the right heading (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-11-15drm: Extract drm_dumb_buffers.cDaniel Vetter1-109/+0
Just code movement, doc cleanup will follow up later. v2: Keep all the copyright notices. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-2-daniel.vetter@ffwll.ch
2016-11-15drm: don't let crtc_ww_class leak outRob Clark1-2/+0
kbuild spotted this error, with drm/msm patches that add a new modeset-lock in the driver and driver built as a module: ERROR: "crtc_ww_class" [drivers/gpu/drm/msm/msm.ko] undefined! Really the only reason for crtc_ww_class not being internal to drm_modeset_lock.c is that drm_modeset_lock_init() was static-inline (for no particularly good reason). Fix that, and move crtc_ww_class into drm_modeset_lock.c. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479163257-18703-1-git-send-email-robdclark@gmail.com
2016-11-12drm: move allocation out of drm_get_format_name()Eric Engestrom1-3/+4
The function's behaviour was changed in 90844f00049e, without changing its signature, causing people to keep using it the old way without realising they were now leaking memory. Rob Clark also noticed it was also allocating GFP_KERNEL memory in atomic contexts, breaking them. Instead of having to allocate GFP_ATOMIC memory and fixing the callers to make them cleanup the memory afterwards, let's change the function's signature by having the caller take care of the memory and passing it to the function. The new parameter is a single-field struct in order to enforce the size of its buffer and help callers to correctly manage their memory. Fixes: 90844f00049e ("drm: make drm_get_format_name thread-safe") Cc: Rob Clark <robdclark@gmail.com> Cc: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Eric Engestrom <eric@engestrom.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.