aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_dp_mst_topology.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-03-22drm/dp: Split drm_dp_mst_allocate_vcpiPandiyan, Dhinakaran1-11/+10
drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure, also finds if there are enough slots available. This check is a duplicate of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check if there are enough vcpi slots before allocating them. This brings the check to one place. Additionally drivers that will use MST state tracking for atomic modesets can use the atomic version of find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi() Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com
2017-03-22drm/dp: Kill unused MST vcpi slot availability trackingPandiyan, Dhinakaran1-7/+8
The avail_slots member in the MST topology manager is never updated to reflect the available vcpi slots. The check is effectively against total slots, 63. So, let's make that check obvious and remove avail_slots. While at it, make debug messages more descriptive. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-3-git-send-email-dhinakaran.pandiyan@intel.com
2017-03-22drm/dp: Kill total_pbn and total_slots in struct drm_dp_mst_topology_mgrPandiyan, Dhinakaran1-3/+2
The total vcpi time slots is always 63 and does not depend on the link BW, remove total_slots from MST topology manager struct. The next change is to remove total_pbn which is hardcoded to 2560. The total PBN that the topology manager allocates from depends on the link rate and is not a constant. So, fix this by removing the total_pbn member itself. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-2-git-send-email-dhinakaran.pandiyan@intel.com
2017-02-23Merge tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-3/+3
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.11. Nothing too major, the tinydrm and mmu-less support should make writing smaller drivers easier for some of the simpler platforms, and there are a bunch of documentation updates. Intel grew displayport MST audio support which is hopefully useful to people, and FBC is on by default for GEN9+ (so people know where to look for regressions). AMDGPU has a lot of fixes that would like new firmware files installed for some GPUs. Other than that it's pretty scattered all over. I may have a follow up pull request as I know BenH has a bunch of AST rework and fixes and I'd like to get those in once they've been tested by AST, and I've got at least one pull request I'm just trying to get the author to fix up. Core: - drm_mm reworked - Connector list locking and iterators - Documentation updates - Format handling rework - MMU-less support for fbdev helpers - drm_crtc_from_index helper - Core CRC API - Remove drm_framebuffer_unregister_private - Debugfs cleanup - EDID/Infoframe fixes - Release callback - Tinydrm support (smaller drivers for simple hw) panel: - Add support for some new simple panels i915: - FBC by default for gen9+ - Shared dpll cleanups and docs - GEN8 powerdomain cleanup - DMC support on GLK - DP MST audio support - HuC loading support - GVT init ordering fixes - GVT IOMMU workaround fix amdgpu/radeon: - Power/clockgating improvements - Preliminary SR-IOV support - TTM buffer priority and eviction fixes - SI DPM quirks removed due to firmware fixes - Powerplay improvements - VCE/UVD powergating fixes - Cleanup SI GFX code to match CI/VI - Support for > 2 displays on 3/5 crtc asics - SI headless fixes nouveau: - Rework securre boot code in prep for GP10x secure boot - Channel recovery improvements - Initial power budget code - MMU rework preperation vmwgfx: - Bunch of fixes and cleanups exynos: - Runtime PM support for MIC driver - Cleanups to use atomic helpers - UHD Support for TM2/TM2E boards - Trigger mode fix for Rinato board etnaviv: - Shader performance fix - Command stream validator fixes - Command buffer suballocator rockchip: - CDN DisplayPort support - IOMMU support for arm64 platform imx-drm: - Fix i.MX5 TV encoder probing - Remove lower fb size limits msm: - Support for HW cursor on MDP5 devices - DSI encoder cleanup - GPU DT bindings cleanup sti: - stih410 cleanups - Create fbdev at binding - HQVDP fixes - Remove stih416 chip functionality - DVI/HDMI mode selection fixes - FPS statistic reporting omapdrm: - IRQ code cleanup dwi-hdmi bridge: - Cleanups and fixes adv-bridge: - Updates for nexus sii8520 bridge: - Add interlace mode support - Rework HDMI and lots of fixes qxl: - probing/teardown cleanups ZTE drm: - HDMI audio via SPDIF interface - Video Layer overlay plane support - Add TV encoder output device atmel-hlcdc: - Rework fbdev creation logic tegra: - OF node fix fsl-dcu: - Minor fixes mali-dp: - Assorted fixes sunxi: - Minor fix" [ This was the "fixed" pull, that still had build warnings due to people not even having build tested the result. I'm not a happy camper I've fixed the things I noticed up in this merge. - Linus ] * tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits) lib/Kconfig: make PRIME_NUMBERS not user selectable drm/tinydrm: helpers: Properly fix backlight dependency drm/tinydrm: mipi-dbi: Fix field width specifier warning drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files drm/amd/powerplay: fix PSI feature on Polars12 drm/amdgpu: refuse to reserve io mem for split VRAM buffers drm/ttm: fix use-after-free races in vm fault handling drm/tinydrm: Add support for Multi-Inno MI0283QT display dt-bindings: Add Multi-Inno MI0283QT binding dt-bindings: display/panel: Add common rotation property of: Add vendor prefix for Multi-Inno drm/tinydrm: Add MIPI DBI support drm/tinydrm: Add helper functions drm: Add DRM support for tiny LCD displays drm/amd/amdgpu: post card if there is real hw resetting performed drm/nouveau/tmr: provide backtrace when a timeout is hit drm/nouveau/pci/g92: Fix rearm drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios drm/nouveau/hwmon: expose power_max and power_crit ..
2017-02-15drm/dp/mst: fix kernel oops when turning off secondary monitorPierre-Louis Bossart1-1/+1
100% reproducible issue found on SKL SkullCanyon NUC with two external DP daisy-chained monitors in DP/MST mode. When turning off or changing the input of the second monitor the machine stops with a kernel oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly. This issue is traced to an inconsistent control flow in drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the same time as 'req_payload.num_slots' is set to zero, but the pointer is dereferenced even when req_payload.num_slot is zero. The problematic dereference was introduced in commit dfda0df34 ("drm/mst: rework payload table allocation to conform better") and may impact all versions since v3.18 The fix suggested by Chris Wilson removes the kernel oops and was found to work well after 10mn of monkey-testing with the second monitor power and input buttons Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990 Fixes: dfda0df34264 ("drm/mst: rework payload table allocation to conform better.") Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: <stable@vger.kernel.org> # v3.18+ Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com
2017-01-25drm/dp: Store drm_device in MST topology managerDhinakaran Pandiyan1-3/+3
struct drm_dp_mst_topology_mgr currently stores a pointer to struct dev. Changing this to instead hold a pointer to drm_device is more useful as it gives access to DRM structures. This also makes it consistent with other DRM structures like drm_crtc, drm_connector etc. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485301777-3465-2-git-send-email-dhinakaran.pandiyan@intel.com
2016-10-26drm/dp/mst: Check peer device type before attempting EDID readVille Syrjälä1-1/+3
Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: stable@vger.kernel.org Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com
2016-10-26drm/dp/mst: Clear port->pdt when tearing down the i2c adapterVille Syrjälä1-0/+2
The i2c adapter is only relevant for some peer device types, so let's clear the pdt if it's still the same as the old_pdt when we tear down the i2c adapter. I don't really like this design pattern of updating port->whatever before doing the accompanying changes and passing around old_whatever to figure stuff out. Would make much more sense to me to the pass the new value around and only update the port->whatever when things are consistent. But let's try to work with what we have right now. Quoting a follow-up from Ville: "And naturally I forgot to amend the commit message w.r.t. this guy [the change in drm_dp_destroy_port]. We don't really need to do this here, but I figured I'd try to be a bit more consistent by having it, just to avoid accidental mistakes if/when someone changes this stuff again later." v2: Clear port->pdt in the caller, if needed (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> (v1) Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com
2016-07-19drm/dp-mst: Missing kernel docDaniel Vetter1-0/+1
Cc: Dave Airlie <airlied@redhat.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-7-git-send-email-daniel.vetter@ffwll.ch
2016-07-19drm/dp-mst: Remove tx_down_in_progressDaniel Vetter1-10/+3
Just replicates whether the list is empty or not. Nuke code to avoid writing docs for it! Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-6-git-send-email-daniel.vetter@ffwll.ch
2016-06-15drm/dp/mst: Always clear proposed vcpi table for port.Andrey Grodzovsky1-5/+3
Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch. Fixes: 91a25e463130 ("drm/dp/mst: deallocate payload on port destruction") Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Cc: Mykola Lysenko <Mykola.Lysenko@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com>
2016-05-09Merge tag 'v4.6-rc7' into drm-nextDave Airlie1-1/+16
Merge this back as we've built up a fair few conflicts, and I have some newer trees to pull in.
2016-04-27drm/dp/mst: Restore primary hub guid on resumeLyude1-0/+12
Some hubs are forgetful, and end up forgetting whatever GUID we set previously after we do a suspend/resume cycle. This can lead to hotplugging breaking (along with probably other things) since the hub will start sending connection notifications with the wrong GUID. As such, we need to check on resume whether or not the GUID the hub is giving us is valid. Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460580618-7421-1-git-send-email-cpaul@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()cpaul@redhat.com1-0/+8
We can thank KASAN for finding this, otherwise I probably would have spent hours on it. This fixes a somewhat harder to trigger kernel panic, occuring while enabling MST where the port we were currently updating the payload on would have all of it's refs dropped before we finished what we were doing: ================================================================== BUG: KASAN: use-after-free in drm_dp_update_payload_part1+0xb3f/0xdb0 [drm_kms_helper] at addr ffff8800d29de018 Read of size 4 by task Xorg/973 ============================================================================= BUG kmalloc-2048 (Tainted: G B W ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] age=16477 cpu=0 pid=2175 ___slab_alloc+0x472/0x490 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x151/0x190 drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] drm_dp_send_link_address+0x526/0x960 [drm_kms_helper] drm_dp_check_and_send_link_address+0x1ac/0x210 [drm_kms_helper] drm_dp_mst_link_probe_work+0x77/0xd0 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 INFO: Freed in drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] age=7521 cpu=0 pid=2175 __slab_free+0x17f/0x2d0 kfree+0x169/0x180 drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] drm_dp_destroy_connector_work+0x2b8/0x490 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 which on this T460s, would eventually lead to kernel panics in somewhat random places later in intel_mst_enable_dp() if we got lucky enough. Signed-off-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22drm/dp/mst: Validate port in drm_dp_payload_send_msg()cpaul@redhat.com1-1/+8
With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-15drm/dp/mst: Restore primary hub guid on resumeLyude1-0/+12
Some hubs are forgetful, and end up forgetting whatever GUID we set previously after we do a suspend/resume cycle. This can lead to hotplugging breaking (along with probably other things) since the hub will start sending connection notifications with the wrong GUID. As such, we need to check on resume whether or not the GUID the hub is giving us is valid. Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460580618-7421-1-git-send-email-cpaul@redhat.com
2016-04-15drm/dp/mst: Enhance DP MST debugfs outputJim Bride1-5/+24
Add some additional information (input vs. output port, sink associated with VC, peer device type, max number of VCs supported) and ensure that any embedded '\0' characters in a branch device's devid string are not written to debugfs. v2: Rebase + change drm_edid_get_monitor_name() call to reflect new signature. v3: Minor changes suggested by Jani + rebase. v4: Rebase cc: dri-devel@lists.freedesktop.org cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460654317-31288-2-git-send-email-jim.bride@linux.intel.com
2016-02-17Revert "drm/dp/mst: change MST detection scheme"Dave Airlie1-19/+18
This reverts commit cfcfa086d43ced33e1099b9befb12f17fca102e1. This causes the tiling properties to break in some unexpected ways, Revert it for now. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: deallocate payload on port destructionMykola Lysenko1-8/+83
This is needed to properly deallocate port payload after downstream branch get unplugged. In order to do this unplugged MST topology should be preserved, to find first alive port on path to unplugged MST topology, and send payload deallocation request to branch device of found port. For this mstb and port kref's are used in reversed order to track when port and branch memory could be freed. Added additional functions to find appropriate mstb as described above. Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: Reverse order of MST enable and clearing VC payload table.Andrey Grodzovsky1-6/+6
On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: move GUID storage from mgr, port to only mst branchHersen Wu1-36/+28
Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: change MST detection schemeMykola Lysenko1-18/+19
1. Get edid for all connected MST displays, not only on logical ports, in the same thread as MST topology detection is done: There are displays that have branches inside w/o logical ports. So in case another SST display connected downstream system can end-up in situation when 3 DOWN requests sent: two for ‘remote i2c read’ and one for ‘enum path resources’, making slots full. 2. Call notification callback in one place in the end of topology discovery/update: This is done to reduce number of events sent to userspace in case complex topology discovery is going, adding multiple number of connectors; 3. Remove notification callback call from short pulse interrupt processing function: This is done in order not to block interrupt processing function, in case any MST request will be made from it. Notification will be send from topology discovery/update work item. Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: Calculate MST PBN with 31.32 fixed pointHarry Wentland1-28/+39
Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/mst: Add range check for max_payloads during initImre Deak1-0/+3
max_payload is limited by the space we have in drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id(). Add a sanity check for this. Caught by coverity. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: David Weinehall <david.weinehall@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/mst: Don't ignore the MST PBN self-test resultImre Deak1-1/+3
Otherwise this call would have no effect. Caught by Coverity. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: David Weinehall <david.weinehall@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm: fix missing reference counting decreaseInsu Yun1-0/+1
In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by: Insu Yun <wuninsu@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-01-04drm/dp/mst: fix in RAD element accessMykola Lysenko1-2/+2
This is needed to receive correct port number from RAD, so MSTB could be found Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-04drm/dp/mst: fix in MSTB RAD initializationMykola Lysenko1-6/+6
This fix is needed to support more then two branch displays, so RAD address consist at least of 2 elements Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-04drm/dp/mst: always send reply for UP requestMykola Lysenko1-19/+11
We should always send reply for UP request in order to make downstream device clean-up resources appropriately. Issue was that reply for UP request was sent only once. Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-04drm/dp/mst: process broadcast messages correctlyMykola Lysenko1-11/+84
In case broadcast message received in UP request, RAD cannot be used to identify message originator. Message should be parsed, originator should be found by GUID from parsed message. Also reply with broadcast in case broadcast message received (for now it is always broadcast) Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-12-23Merge tag 'drm-intel-next-2015-12-18' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie1-3/+35
- fix atomic watermark recomputation logic (Maarten) - modeset sequence fixes for LPT (Ville) - more kbl enabling&prep work (Rodrigo, Wayne) - first bits for mst audio - page dirty tracking fixes from Dave Gordon - new get_eld hook from Takashi, also included in the sound tree - fixup cursor handling when placed at address 0 (Ville) - refactor VBT parsing code (Jani) - rpm wakelock debug infrastructure ( Imre) - fbdev is pinned again (Chris) - tune the busywait logic to avoid wasting cpu cycles (Chris) * tag 'drm-intel-next-2015-12-18' of git://anongit.freedesktop.org/drm-intel: (81 commits) drm/i915: Update DRIVER_DATE to 20151218 drm/i915/skl: Default to noncoherent access up to F0 drm/i915: Only spin whilst waiting on the current request drm/i915: Limit the busy wait on requests to 5us not 10ms! drm/i915: Break busywaiting for requests on pending signals drm/i915: don't enable autosuspend on platforms without RPM support drm/i915/backlight: prefer dev_priv over dev pointer drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2) drm/i915: Pin the ifbdev for the info->system_base GGTT mmapping drm/i915: Set the map-and-fenceable flag for preallocated objects drm/i915: mdelay(10) considered harmful drm/i915: check that we are in an RPM atomic section in GGTT PTE updaters drm/i915: add support for checking RPM atomic sections drm/i915: check that we hold an RPM wakelock ref before we put it drm/i915: add support for checking if we hold an RPM reference drm/i915: use assert_rpm_wakelock_held instead of opencoding it drm/i915: add assert_rpm_wakelock_held helper drm/i915: remove HAS_RUNTIME_PM check from RPM get/put/assert helpers drm/i915: get a permanent RPM reference on platforms w/o RPM support drm/i915: refactor RPM disabling due to RC6 being disabled ...
2015-12-15drm/dp/mst: save vcpi with payloadsHarry Wentland1-0/+2
This makes it possibly for drivers to find the associated mst_port by looking at the payload allocation table. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449514552-10236-3-git-send-email-harry.wentland@amd.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-15drm/dp/mst: reply with ACK for UP reqsMykola Lysenko1-1/+1
Currently we reply with NACK to UP requests which might confuse receivers. We haven't seen any actual issues with this but should still respond to UP requests correctly. Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449514552-10236-2-git-send-email-harry.wentland@amd.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-10dp/mst: add SDP stream supportLibin Yang1-3/+35
This adds code to initialise the SDP streams for a sink in the simplest ordering. I've no idea how you'd want to control the ordering at this level, so don't bother until someone comes up with a use case. Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449036584-105393-1-git-send-email-libin.yang@linux.intel.com
2015-10-22drm: fix mutex leak in drm_dp_get_mst_branch_deviceAdam Richter1-3/+4
In Linux 4.3-rc5, there is an error case in drm_dp_get_branch_device that returns without releasing mgr->lock, resulting a spew of kernel messages about a kernel work function possibly having leaked a mutex and presumably more serious adverse consequences later. This patch changes the error to "goto out" to unlock the mutex before returning. [airlied: grabbed from drm-next as it fixes something we've seen] Signed-off-by: Adam J. Richter <adam_richter2004@yahoo.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-15drm/dp/mst: make mst i2c transfer code more robust.Dave Airlie1-1/+2
This zeroes the msg so no random stack data ends up getting sent, it also limits the function to not accepting > 4 i2c msgs. Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: add some defines for logical/physical portsDave Airlie1-1/+1
This just removes the magic number. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: drop cancel work sync in the mstb destroy path (v2)Dave Airlie1-2/+3
Since 9eb1e57f564d4e6e10991402726cc83fe0b9172f drm/dp/mst: make sure mst_primary mstb is valid in work function we validate the mstb structs in the work function, and doing that takes a reference. So we should never get here with the work function running using the mstb device, only if the work function hasn't run yet or is running for another mstb. So we don't need to sync the work here, this was causing lockdep spew as below. [ +0.000160] ============================================= [ +0.000001] [ INFO: possible recursive locking detected ] [ +0.000002] 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 Tainted: G W ------------ [ +0.000001] --------------------------------------------- [ +0.000001] kworker/4:2/1262 is trying to acquire lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b29a5>] flush_work+0x5/0x2e0 [ +0.000007] but task is already holding lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] other info that might help us debug this: [ +0.000001] Possible unsafe locking scenario: [ +0.000002] CPU0 [ +0.000000] ---- [ +0.000001] lock((&mgr->work)); [ +0.000002] lock((&mgr->work)); [ +0.000001] *** DEADLOCK *** [ +0.000001] May be due to missing lock nesting notation [ +0.000002] 2 locks held by kworker/4:2/1262: [ +0.000001] #0: (events_long){.+.+.+}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] #1: ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000003] stack backtrace: [ +0.000003] CPU: 4 PID: 1262 Comm: kworker/4:2 Tainted: G W ------------ 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 [ +0.000001] Hardware name: LENOVO 20EGS0R600/20EGS0R600, BIOS GNET71WW (2.19 ) 02/05/2015 [ +0.000008] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ +0.000001] ffffffff82c26c90 00000000a527b914 ffff88046399bae8 ffffffff816fe04d [ +0.000004] ffff88046399bb58 ffffffff8110f47f ffff880461438000 0001009b840fc003 [ +0.000002] ffff880461438a98 0000000000000000 0000000804dc26e1 ffffffff824a2c00 [ +0.000003] Call Trace: [ +0.000004] [<ffffffff816fe04d>] dump_stack+0x19/0x1b [ +0.000004] [<ffffffff8110f47f>] __lock_acquire+0x115f/0x1250 [ +0.000002] [<ffffffff8110fd49>] lock_acquire+0x99/0x1e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000002] [<ffffffff810b29ee>] flush_work+0x4e/0x2e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000004] [<ffffffff81025905>] ? native_sched_clock+0x35/0x80 [ +0.000002] [<ffffffff81025959>] ? sched_clock+0x9/0x10 [ +0.000002] [<ffffffff810da1f5>] ? local_clock+0x25/0x30 [ +0.000002] [<ffffffff8110dca9>] ? mark_held_locks+0xb9/0x140 [ +0.000003] [<ffffffff810b4ed5>] ? __cancel_work_timer+0x95/0x160 [ +0.000002] [<ffffffff810b4ee8>] __cancel_work_timer+0xa8/0x160 [ +0.000002] [<ffffffff810b4fb0>] cancel_work_sync+0x10/0x20 [ +0.000007] [<ffffffffa0160d17>] drm_dp_destroy_mst_branch_device+0x27/0x120 [drm_kms_helper] [ +0.000006] [<ffffffffa0163968>] drm_dp_mst_link_probe_work+0x78/0xa0 [drm_kms_helper] [ +0.000002] [<ffffffff810b5850>] process_one_work+0x220/0x710 [ +0.000002] [<ffffffff810b57e4>] ? process_one_work+0x1b4/0x710 [ +0.000005] [<ffffffff810b5e5b>] worker_thread+0x11b/0x3a0 [ +0.000003] [<ffffffff810b5d40>] ? process_one_work+0x710/0x710 [ +0.000002] [<ffffffff810beced>] kthread+0xed/0x100 [ +0.000003] [<ffffffff810bec00>] ? insert_kthread_work+0x80/0x80 [ +0.000003] [<ffffffff817121d8>] ret_from_fork+0x58/0x90 v2: add flush_work. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: split connector registration into two parts (v2)Dave Airlie1-3/+5
In order to cache the EDID properly for tiled displays, we need to retrieve it before we register the connector with userspace, otherwise userspace can call get resources and try and get the edid before we've even cached it. This fixes some problems when hotplugging mst monitors, with X/mutter running. As mutter seems to get 0 modes for one of the monitors in the tile. v2: fix warning in radeon handle tile setting in cached path rather than get edid path. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: update the link_address_sent before sending the link address (v3)Dave Airlie1-13/+12
Update the state before sending the msg to close it. v2: reset value if return indicates we haven't send the msg. v3: just clean the code up. Pointed out by Adam J Richter on Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91481 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: fixup handling hotplug on port removal.Dave Airlie1-10/+26
output ports should always have a connector, unless in the rare case connector allocation fails in the driver. In this case we only need to teardown the pdt, and free the struct, and there is no need to send a hotplug msg. In the case were we add the port to the destroy list we need to send a hotplug if we destroy any connectors, so userspace knows to reprobe stuff. this patch also handles port->connector allocation failing which should be a rare event, but makes the code consistent. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: don't pass port into the path builder functionDave Airlie1-4/+5
This is unnecessary and it makes it easier to see what is needed from port. also add blank line to make things nicer. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-24Merge tag 'v4.2-rc8' into drm-nextDave Airlie1-6/+13
Linux 4.2-rc8 Backmerge required for Intel so they can fix their -next tree up properly.
2015-08-21drm/dp/mst: dump branch OUI in debugfs (v2)Dave Airlie1-0/+10
It appears some MST docks are worse than other, but the only way to know is to see the sw revisions in here, so dump the branch OUI so we can look at the sw revision. v2: Thierry made me feel guilty, so I parsed the branch OUI. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-15Merge tag 'topic/drm-fixes-2015-08-14' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie1-6/+13
single MST fixes from Maarten. * tag 'topic/drm-fixes-2015-08-14' of git://anongit.freedesktop.org/drm-intel: drm/dp/mst: Remove port after removing connector.
2015-08-11drm/dp/mst: Remove port after removing connector.Maarten Lankhorst1-6/+13
The port is removed synchronously, but the connector delayed. This causes a use after free which can cause a kernel BUG with slug_debug=FPZU. This is fixed by freeing the port after the connector. This fixes a regression introduced with 6b8eeca65b18ae77e175cc2b6571731f0ee413bf "drm/dp/mst: close deadlock in connector destruction." Cc: stable@vger.kernel.org Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-04drm/dp-mst: Remove debug WARN_ONDaniel Vetter1-1/+0
Apparently been in there since forever and fairly easy to hit when hotplugging really fast. I can do that since my mst hub has a manual button to flick the hpd line for reprobing. The resulting WARNING spam isn't pretty. Cc: Dave Airlie <airlied@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-06-25drm/dp/mst: close deadlock in connector destruction.Dave Airlie1-2/+38
I've only seen this once, and I failed to capture the lockdep backtrace, but I did some investigations. If we are calling into the MST layer from EDID probing, we have the mode_config mutex held, if during that EDID probing, the MST hub goes away, then we can get a deadlock where the connector destruction function in the driver tries to retake the mode config mutex. This offloads connector destruction to a workqueue, and avoid the subsequenct lock ordering issue. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-23drm/dp/mst: take lock around looking up the branch device on hpd irqDave Airlie1-0/+3
If we are doing an MST transaction and we've gotten HPD and we lookup the device from the incoming msg, we should take the mgr lock around it, so that mst_primary and mstb->ports are valid. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-23drm/dp/mst: make sure mst_primary mstb is valid in work functionDaniel Vetter1-5/+19
This validates the mst_primary under the lock, and then calls into the check and send function. This makes the code a lot easier to understand the locking rules in. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.