aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/exynos (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-28Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds10-189/+234
Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
2018-10-01drm/exynos: mixer: Make plane alpha configurableChristoph Manszewski4-16/+30
The mixer hardware supports variable plane alpha. Currently planes are opaque, make this configurable. Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913 using modetest. Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: mixer: Make pixel blend mode configurableChristoph Manszewski3-6/+29
The mixer hardware supports both premultiplied alpha and non-premultiplied alpha. Currently premultiplied alpha is default, make this configurable. Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913 using modetest. Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: drm_plane: Correct exynos_drm_plane_resetChristoph Manszewski1-4/+2
Make use of helper functions in exynos_drm_plane_reset in order to set all default values. Currently alpha isn't set during reset. Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: Use selected dma_dev default iommu domain instead of a fake oneMarek Szyprowski1-28/+6
Instead of allocating a fake IOMMU domain for all Exynos DRM components, simply reuse the default IOMMU domain of the already selected DMA device. This allows some design changes in IOMMU framework without breaking IOMMU support in Exynos DRM. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: gsc: Add support for tiled formatsMarek Szyprowski1-12/+34
Add support for 16x16 tiled NV12 and NV21 formats. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: scaler: Add support for tiled formatsAndrzej Pietrasiewicz1-59/+78
Add support for 16x16 tiled formats: NV12/NV21, YUYV and YUV420. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixed line over 80 characters warning Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20gpu/drm/exynos: Convert drm_atomic_helper_suspend/resume()Souptick Joarder4-52/+2
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). exynos_drm_fbdev_suspend/resume can be removed as drm_mode_config_helper_suspend/resume has implement the same in generic way. Remove suspend_state from exynos_drm_private struct as it is no more useful. Signed-off-by: Ajit Negi <ajitn.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: enable out_bridge in exynos_dsi_enableMaciej Purski1-15/+23
As the out bridge will not be enabled directly by the framework, it should be enabled by DSI. exynos_dsi_enable() should handle a case, when there is an out_bridge connected as a DSI peripheral. Changed in v5: - fixed error path in exynos_dsi_enable Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: move connector creation to attach callbackMaciej Purski1-21/+32
The current implementation assumes that the only possible peripheral device for DSIM is a panel. Using an output bridge child device should also be possible. If an output bridge is available, don't create a new connector. Instead, call drm_bridge_attach() and set encoder's bridge to NULL in order to avoid an out bridge from being visible by the framework, as the DSI bus needs control on enabling its child output bridge. Such sequence is required by Toshiba TC358764 bridge, which is a DSI peripheral bridge device. changed in v5: - detach bridge in mipi_dsi detach callback Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Manually merged due to merge conflict. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: rename bridge_node to in_bridge_nodeMaciej Purski1-8/+8
Driver uses bridge_node to refer to bridge on input side of DSI. Since we want to add support for bridges on output side lets add "in" prefix to avoid confusion with out bridges. Changes in v5: - replace mic_ prefix with in_ Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsuung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24drm/exynos/mixer: Remove unused local variable privKrzysztof Kozlowski1-2/+0
Remove local variable 'priv' to fix GCC warning: drivers/gpu/drm/exynos/exynos_mixer.c: In function 'mixer_initialize': drivers/gpu/drm/exynos/exynos_mixer.c:840:29: warning: variable 'priv' set but not used [-Wunused-but-set-variable] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24drm/exynos: Ensure suspended runtime PM state during system suspendMarek Szyprowski8-0/+17
Add calls to pm_runtime_force_{suspend,resume} as SYSTEM_SLEEP_PM_OPS for all drivers for the real Exynos DRM hardware modules. This ensures that the resources will be released for the system PM suspend/resume cycle. Exynos DRM core already takes care of suspending the whole display pipeline before PM callbacks of the real devices are called. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24drm/exynos: Suspend/resume display pipeline as early/late as possibleMarek Szyprowski1-7/+4
In the current code, exynos_drm_suspend() function is called after all real devices (CRTCs, Encoders, etc) are suspended, because Exynos DRM virtual platform device is created as last device in the system (as a part of DRM registration). None of the devices for real hardware modules has its own system suspend/resume callbacks, so it doesn't change any order of the executed code, but it has a side-effect: runtime PM callbacks for real devices are not executed, because those devices are considered by PM core as already suspended. This might cause issues on boards with complex pipelines, where something depends on the runtime PM state of the given device. To ensure that exynos_drm_suspend() is called before any suspend callback from the real devices, assign it to .prepare callback. Same for exynos_drm_resume(), using .complete callback ensures that all real devices have been resumed when calling it. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24drm/exynos: Drop useless check from exynos_drm_{suspend,resume}Marek Szyprowski1-2/+2
The virtual Exynos DRM device has no runtime PM enabled, so checking for its runtime suspended state is useless. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24drm/exynos: Use common exynos_drm_gem_get()/put() functions for GEM lookupMarek Szyprowski2-11/+9
Use recently introduced common helpers to unify GEM handling code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24drm/exynos: gem: Simplify access to exynos GEM objectsMarek Szyprowski3-96/+35
Replace all calls to exynos_drm_gem_get_{dma_addr,size}, by a simpler function exynos_drm_gem_get(). This lets the caller to get access to exynos_drm_gem object and extract any information about GEM object without searching object tree for getting each parameter. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24drm/exynos: g2d: Convert to driver component APIMarek Szyprowski6-335/+115
Exynos G2D driver is the last client of the custom Exynos 'sub-driver' framework. In the current state it doesn't really resolve any of the issues it has been designed for, as Exynos DRM is already built only as a single kernel module. Remove the custom 'sub-driver' framework and simply use generic component framework also in G2D driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-nextInki Dae11-102/+149
Fixups - Fix several problems to IPPv2 merged to mainline recentely. . An align problem of width size that IPP driver incorrectly calculated the real buffer size. . Horizontal and vertical flip problem. . Per-plane global alpha for XRGB modes. . Incorrect variant of the YUV modes. - Fix plane overlapping problem. . The stange order of overlapping planes on XRGB modes by setting global alpha value to maximum value. Cleanup - Rename a enum type, drm_ipp_size_id, to one specific to Exynos, drm_exynos_ipp_limit_type. - Replace {un/reference} with {put,get} functions. . it replaces several reference/unreference functions with Linux kernel nameing standard.
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter4-4/+4
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter2-2/+2
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-07-10drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULLBoris Brezillon3-4/+9
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
2018-07-02drm/exynos: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-2/+2
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-02drm/exynos: Replace drm_gem_object_unreference_unlocked with put functionThomas Zimmermann2-6/+6
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-02drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functionsThomas Zimmermann1-1/+1
This patch unifies the naming of DRM functions for reference counting of struct drm_framebuffer. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: ipp: use correct enum typeStefan Agner1-1/+1
The limit_id_fallback array uses enum drm_ipp_size_id to index its content. The content itself is of type enum drm_exynos_ipp_limit_type. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: decon5433: Fix WINCONx reset valueMarek Szyprowski1-1/+1
The only bits that should be preserved in decon_win_set_fmt() is WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and are set by the mentioned function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: decon5433: Fix per-plane global alpha for XRGB modesMarek Szyprowski1-2/+2
Set per-plane global alpha to maximum value to get proper blending of XRGB and ARGB planes. This fixes the strange order of overlapping planes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: fimc: Use real buffer width for configuring the hardwareMarek Szyprowski1-7/+10
DMA hardware should respect buffer pitch, so use the width calculated from the buffer pitch instead of the virtual one. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modesMarek Szyprowski2-9/+21
Fix following issues related to planar YUV pixel format configuration: - NV16/61 modes were incorrectly programmed as NV12/21, - YVU420 was programmed as YUV420 on source, - YVU420 and YUV422 were programmed as YUV420 on output. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Fix DRM_MODE_REFLECT_{X,Y} interpretationMarek Szyprowski1-8/+8
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip were swapped in GScaler driver. Fix this by swapping code for interpreting them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Increase Exynos5433 buffer width alignment to 16 pixelsMarek Szyprowski1-1/+1
Investigation revealed that GScaler hardware requires the real buffer width (pitch) to be aligned to 16 pixels. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Use real buffer width for configuring the hardwareMarek Szyprowski1-2/+2
DMA hardware should respect buffer pitch, so use the width calculated from the buffer pitch instead of the virtual one. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: scaler: Fix support for YUV420, YUV422 and YUV444 modesMarek Szyprowski1-6/+6
Fix Cb/CR components order in two-planar YUV420, YUV422 and YUV444 modes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: scaler: Reset hardware before starting the operationAndrzej Pietrasiewicz1-3/+29
Ensure that Scaler hardware is properly reset and interrupts are cleared before processing next image. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: rotator: Fix DRM_MODE_REFLECT_{X,Y} interpretationMarek Szyprowski1-2/+2
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip were swapped in Rotator driver. Fix this by swapping code for interpreting them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: ipp: Rework checking for the correct buffer formatsMarek Szyprowski1-51/+57
Prepare a common function for size and scale checks and call it for source and destination buffers. Then also move there the state-less checks from exynos_drm_ipp_task_setup_buffer, so the format information is already available in limits processing. Finally perform the IPP_LIMIT_BUFFER check on the real width of the buffer (the width calculated from the provided buffer pitch). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-22Merge tag 'drm-misc-next-2018-06-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-2/+0
drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma
2018-06-20Merge drm-upstream/drm-next into drm-misc-nextGustavo Padovan23-2168/+3203
We got a few conflicts in drm_atomic.c after merging the DRM writeback support, now we need a backmerge to unlock develop development on drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook4-6/+8
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11drm/exynos: Stop updating plane->crtcVille Syrjälä1-2/+0
We want to get rid of plane->crtc on atomic drivers. Stop setting it. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-10-ville.syrjala@linux.intel.com Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-05-30Merge tag 'exynos-drm-next-for-v4.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-nextDave Airlie6-20/+22
Add more HW overlays support - It enables hardware overlay number 4 and 5. For this, this patch series adds required clocks. Several fixups - Fix default value of zpos according to real hardware overlay number. - Fix error value of exynos_Drm_crtc_get_by_type function correctly. - Fix static checker warning of scaler_task_done function. - Fix signedness bug in fimc_setup_clocks function. One cleanup - Disable framedone interrupt of DSI device which is not required. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1527229919-25665-1-git-send-email-inki.dae@samsung.com
2018-05-25drm/exynos: fimc: signedness bug in fimc_setup_clocks()Dan Carpenter1-1/+1
"id" needs to be signed for the error handling to work. Fixes: 7a2d5c77c558 ("drm/exynos: fimc: Convert driver to IPP v2 core API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-25drm/exynos: scaler: fix static checker warningInki Dae1-1/+1
drivers/gpu/drm/exynos/exynos_drm_scaler.c:402 scaler_task_done() warn: signedness bug returning '(-22)' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-24drm/exynos: Fix default value for zpos plane propertyMarek Szyprowski1-5/+4
The default zpos property for all planes in Exynos DRM was fixed as zero. Fix this by providing proper value provided by hardware drivers, which typically matches hardware window number. Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: e47726a11e11 ("drm/exynos: use generic code for managing zpos plane property") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-24drm/exynos: Fix error value in exynos_drm_crtc_get_by_type()Marek Szyprowski1-1/+1
EPERM is not the correct error value when the driver is not able to get its resources. Change it to ENODEV. Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-24drm/exynos/dsi: mask frame-done interruptAndrzej Hajda1-3/+3
DSI driver is not really interested in this interrupt. It causes only unnecessary code execution of interrupt handler and could possibly cause FIFO overflow - as it triggers DSI interrupt handler to process next DSI transfer. With this patch we will get rid of about 30 IRQ handler calls per second. Fixes: e6f988a45857 ("drm/exynos: dsi: add support for Exynos5433") Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-24drm/exynos: decon: Add support for hardware windows no 4 and 5Marek Szyprowski1-9/+12
Enable support for 2 more hardware windows. This require enabling a few more clocks and set proper plane type for all windows. In the new configuration primary plane uses hardware window no 3 and cursor uses window no 5. The remaining hardware windows are used for overlays. This gives us an overlay plane both below and above primary plane for both Decon and DeconTV (which uses hardware window nr 0 for background). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-15Merge tag 'exynos-drm-next-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-nextDave Airlie20-2150/+3183
- Add S5PV210 FIMD variant support. - Add IPP v2 framework. . it is a rewritten version of the Exynos mem-to-mem image processing framework which supprts color space conversion, image up/down-scaling and rotation. This new version replaces existing userspace API with new easy-to-use and simple ones so we have already applied the use of these API to real user, Tizen Platform[1], and also makes existing Scaler, FIMC, GScaler and Rotator drivers to use IPP v2 core API. And below are patch lists we have applied to a real user, https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/log/?h=tizen&qt=grep&q=ipp https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/commit/?h=tizen&id=b59be207365d10efd489e6f71c8a045b558c44fe https://git.tizen.org/cgit/platform/kernel/linux-exynos/log/?h=tizen&qt=grep&q=ipp TDM(Tizen Display Manager) is a Display HAL for Tizen platform. Ps. Only real user using IPP API is Tizen. [1] https://www.tizen.org/ - Two cleanups . One is to just remove mode_set callback from MIPI-DSI driver because drm_display_mode data is already available from crtc atomic state. . And other is to just use new return type, vm_fault_t for page fault handler. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Mon 14 May 2018 14:23:53 AEST # gpg: using RSA key 573834890C4312B8 # gpg: Can't check signature: public key not found Link: https://patchwork.freedesktop.org/patch/msgid/1526276453-29879-1-git-send-email-inki.dae@samsung.com
2018-05-14drm/exynos/dsi: remove mode_set callbackAndrzej Hajda1-30/+10
The callback was used only to copy provided mode to context for later usage. Since the mode is always available from crtc atomic state this code can be removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.