aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/exynos
AgeCommit message (Collapse)AuthorFilesLines
2016-05-10drm/exynos/dpi: use of_graph_get_endpoint_by_regs helperPhilipp Zabel1-67/+2
This allows to remove the local of_graph_get_port_by_reg(), of_graph_get_endpoint_by_reg(), of_get_child_by_name_reg(), and of_graph_get_remote_port_parent() functions. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos: Nuke dummy fb->dirty callbackDaniel Vetter1-11/+0
It's an optional hook. Might be needed for frontbuffer rendering on manual upload displays, but a simple TODO doesn't explain at all what needs to be done or why. Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos: use directly DMA mapping APIs on g2dJoonyoung Shim3-37/+5
There is no reason to be wapper functions to use DMA mapping APIs. Use directly DMA mapping APIs and remove the wapper functions. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos/hdmi: Don't print error on deferral due to regulatorsJavier Martinez Canillas1-2/+4
The regulators may not be available just because their driver's probe function was just not executed and so the regulators not registered. So, in this case the Exynos HDMI driver should not print logs since a -EPROBE_DEFER is not really an error and that will just pollute the kernel log and confuse users. This patch prevents the following misleading messages to be printed: [ 1.443638] [drm:hdmi_probe] *ERROR* failed to get regulators [ 1.449326] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos: fix imported dma-buf to be mappedJoonyoung Shim1-0/+3
The imported dma-buf should be mapped by sub-system exporting it. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos: support gem_prime_mmapJoonyoung Shim3-13/+35
This allows exported dma-bufs to be mapped using gem_prime_mmap. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos: fimd: harden fimd_calc_clkdiv()Tobias Jakobi1-1/+8
Don't use the vrefresh field of the DRM mode since this one is supposed to only be used for debug purpose. Instead use the clock field which should also provide much more precise information. Also sanitize the case in which the clock value should be zero. We then just default to the maximum clock divisor. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos: fix cancel page flip codeAndrzej Hajda1-10/+5
Driver code did not remove event from the list of pending events before destroy. As a result drm core later tried to inspect invalid memory location. The patch replaces removal code with call to core helper. The bug was detected using KASAN: [ 10.107249] ================================================================== [ 10.107518] BUG: KASAN: use-after-free in drm_release+0xe9c/0x1000 at addr ffffffc089154a18 [ 10.107784] Read of size 8 by task modetest/103 [ 10.107931] ============================================================================= [ 10.113191] BUG kmalloc-128 (Not tainted): kasan: bad access detected [ 10.119608] ----------------------------------------------------------------------------- [ 10.119608] [ 10.129243] Disabling lock debugging due to kernel taint [ 10.134551] INFO: Allocated in drm_mode_page_flip_ioctl+0x500/0xa98 age=4 cpu=0 pid=103 [ 10.142532] alloc_debug_processing+0x18c/0x198 [ 10.147043] ___slab_alloc.constprop.28+0x360/0x380 [ 10.151906] __slab_alloc.isra.25.constprop.27+0x54/0xa0 [ 10.157197] kmem_cache_alloc_trace+0x370/0x3b0 [ 10.161709] drm_mode_page_flip_ioctl+0x500/0xa98 [ 10.166400] drm_ioctl+0x4c4/0xb68 [ 10.169787] do_vfs_ioctl+0x16c/0xeb8 [ 10.173429] SyS_ioctl+0x8c/0xa0 [ 10.176642] el0_svc_naked+0x24/0x28 [ 10.180204] INFO: Freed in exynos_drm_crtc_cancel_page_flip+0xe0/0x160 age=0 cpu=0 pid=103 [ 10.188447] free_debug_processing+0x174/0x388 [ 10.192871] __slab_free+0x2e8/0x438 [ 10.196431] kfree+0x350/0x360 [ 10.199469] exynos_drm_crtc_cancel_page_flip+0xe0/0x160 [ 10.204762] exynos_drm_preclose+0x58/0xa0 [ 10.208844] drm_release+0x1f0/0x1000 [ 10.212491] __fput+0x1c4/0x5b8 [ 10.215613] ____fput+0xc/0x18 [ 10.218654] task_work_run+0x130/0x198 [ 10.222385] do_exit+0x700/0x2278 [ 10.225681] do_group_exit+0xe4/0x2c8 [ 10.229327] SyS_exit_group+0x1c/0x20 [ 10.232973] el0_svc_naked+0x24/0x28 [ 10.236532] INFO: Slab 0xffffffbdc2a45500 objects=32 used=10 fp=0xffffffc089154a00 flags=0x4080 [ 10.245210] INFO: Object 0xffffffc089154a00 @offset=2560 fp=0xffffffc089157600 [ 10.245210] ... [ 10.384532] CPU: 0 PID: 103 Comm: modetest Tainted: G B 4.5.0-rc3-00748-gd5e2881 #271 [ 10.398325] Call trace: [ 10.400764] [<ffffffc000091428>] dump_backtrace+0x0/0x328 [ 10.406141] [<ffffffc000091764>] show_stack+0x14/0x20 [ 10.411176] [<ffffffc00089c550>] dump_stack+0xb0/0xe8 [ 10.416210] [<ffffffc000395778>] print_trailer+0xf8/0x160 [ 10.421592] [<ffffffc00039b5cc>] object_err+0x3c/0x50 [ 10.426626] [<ffffffc00039d630>] kasan_report_error+0x248/0x550 [ 10.432527] [<ffffffc00039da50>] __asan_report_load8_noabort+0x40/0x48 [ 10.439039] [<ffffffc000b5b724>] drm_release+0xe9c/0x1000 [ 10.444419] [<ffffffc0003d340c>] __fput+0x1c4/0x5b8 [ 10.449280] [<ffffffc0003d3884>] ____fput+0xc/0x18 [ 10.454055] [<ffffffc000101aa8>] task_work_run+0x130/0x198 [ 10.459522] [<ffffffc0000bc058>] do_exit+0x700/0x2278 [ 10.464557] [<ffffffc0000bdcfc>] do_group_exit+0xe4/0x2c8 [ 10.469939] [<ffffffc0000bdefc>] SyS_exit_group+0x1c/0x20 [ 10.475320] [<ffffffc000087530>] el0_svc_naked+0x24/0x28 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos/decon5433: do not use unnecessary software triggerAndrzej Hajda1-1/+2
Software trigger should not be used if hardware trigger is configured. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos/decon5433: handle vblank in vblank interruptAndrzej Hajda1-2/+1
vblank should be signaled to userspace after reading framebuffers not before, signaling it in TE interrupt looks wrong. TE triggers reading framebuffers so it is the worst moment. Tearing is not observable because hardware prevents it, but there are frequently skipped vblank events. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos/hdmi: expose HDMI-PHY clock as pipeline clockAndrzej Hajda1-19/+48
HDMI-PHY clock should be accessible from other components in the pipeline. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos: Use lockless gem BO free callbackDaniel Vetter1-1/+1
No dev->struct_mutex anywhere to be seen. Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-18-git-send-email-daniel.vetter@ffwll.ch
2016-05-09Merge tag 'v4.6-rc7' into drm-nextDave Airlie1-1/+0
Merge this back as we've built up a fair few conflicts, and I have some newer trees to pull in.
2016-05-05Merge tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie2-3/+3
Ofc I promise just a few leftovers for drm-misc and somehow it's the biggest pull. But really mostly trivial stuff: - MAINTAINERS updates from Emil - rename async to nonblock in atomic_commit to avoid the confusion between nonblocking ioctl and async flip (= not vblank synced), from Maarten. Needs to be regened with newer drivers, but probably only after -rc1 to catch them all. - actually lockless gem_object_free, plus acked driver conversion patches. All the trickier prep stuff already is in drm-next. - Noralf's nice work for generic defio support in our fbdev emulation. Keeps the udl hack, and qxl is tested by Gerd. * tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm: Fixup locking WARN_ON mistake around gem_object_free_unlocked drm/etnaviv: Use lockless gem BO free callback drm/imx: Use lockless gem BO free callback drm/radeon: Use lockless gem BO free callback drm/amdgpu: Use lockless gem BO free callback drm/gem: support BO freeing without dev->struct_mutex MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver. MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers MAINTAINERS: Add a few DRM drivers by Dave Airlie MAINTAINERS: List the correct git repo for the Renesas DRM drivers MAINTAINERS: Update the files list for the Renesas DRM drivers MAINTAINERS: Update the files list for the Armada DRM driver MAINTAINERS: Update the files list for the Rockchip DRM driver MAINTAINERS: Update the files list for the Exynos DRM driver MAINTAINERS: Add maintainer entry for the VMWGFX DRM driver MAINTAINERS: Add maintainer entry for the MSM DRM driver MAINTAINERS: Add maintainer entry for the Nouveau DRM driver MAINTAINERS: Update the files list for the Etnaviv DRM driver MAINTAINERS: Remove unneded wildcard for the i915 DRM driver drm/atomic: Add WARN_ON when state->acquire_ctx is not set. ...
2016-05-02drm/exynos: Rename async to nonblock.Maarten Lankhorst2-3/+3
The async name is deprecated and should be changed to nonblocking. Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-5-git-send-email-maarten.lankhorst@linux.intel.com
2016-04-30drm/exynos: clean up register definions for fimd and deconInki Dae2-13/+12
This patch removes suffixes from I80 relevant register definitions, which are misleading. This is based on top of below patch set, http://www.spinics.net/lists/dri-devel/msg104057.html Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: decon: clean up interface typeInki Dae1-26/+29
This patch cleans up interface type relevant codes. Trigger mode is determinded only by i80 mode, which isn't related to Display types - HDMI or Display controller. So this patch makes the trigger mode to be set only in case of i80 mode - For DECON-TV, HW Trigger mode is flaged mandatorily because HDMI Timing Generator generates VSYNC signal which works as a hardware trigger. Changelog v2. - If interface type is HDMI then set out_type to I80. - fix compile warning. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fimd: add HW trigger supportInki Dae1-0/+47
This patch adds HW trigger support on i80 mode. Until now, Exynos DRM only supported SW trigger which was set SWTRGCMD bit of TRIGCON register by CPU to transfer scanout buffer to Display bus device or panel. With this patch, the transmission to Display bus device or panel will be initiated by FIMD controller. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: clean up wait_for_vblankInki Dae4-44/+0
This patch cleans up wait_for_vblank relevant codes. wait_for_vblank callback isn't used anymore in Exynos drm driver so it removes relevant codes. However, display controllers - FIMD and DECON - still use this function driver internally to ensure shadow registers to be updated, which resolves page fault issue so keep it. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: mixer: use generic of_device_get_match_data helperMarek Szyprowski1-7/+3
Simplify code by replacing custom code by generic helper. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: mixer: remove support for non-dt platformsMarek Szyprowski1-16/+0
There are no non-devicetree based Exynos platforms in mainline, so there no point keeping old platform driver data for them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: hdmi: use generic of_device_get_match_data helperMarek Szyprowski1-6/+1
Simplify code by replacing custom code by generic helper. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: rotator: use generic of_device_get_match_data helperMarek Szyprowski1-8/+3
Simplify code by replacing custom code by generic helper. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fimd: use generic of_device_get_match_data helperMarek Szyprowski1-13/+4
Simplify code by replacing custom code by generic helper. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: dsi: use generic of_device_get_match_data helperMarek Szyprowski1-18/+9
Simplify code by replacing custom code by generic helper and add missing const qualifier to driver data structures. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: exynos5433_decon: use generic of_device_get_match_data helperMarek Szyprowski1-4/+1
Simplify code by replacing custom code by generic helper. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: convert clock_enable crtc callback to pipeline clockAndrzej Hajda3-25/+16
clock_enable callback is used only by FIMD->DP pipeline. Similar but more universal functionality provides pipeline clock. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <daeinki@gmail.com>
2016-04-30drm/exynos/mixer: enable HDMI-PHY before configuring MIXERAndrzej Hajda1-0/+4
According to documentation HDMI-PHY must be on prior to MIXER configuration. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: enable HDMI-PHY before configuring DECONAndrzej Hajda1-0/+4
According to documentation and tests HDMI-PHY must be on prior to MIXER configuration. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
2016-04-30drm/exynos: add support for pipeline clock to the frameworkAndrzej Hajda1-0/+12
Components belonging to the same pipeline often requires synchronized clocks. Such clocks are sometimes provided by external clock controller, but they can be also provided by pipeline components. In latter case there should be a way to access them from another component belonging to the same pipeline. This is the case of: - DECON,FIMD -> HDMI and HDMI-PHY clock, - FIMD -> DP and DP clock in FIMD. The latter case has been solved by clock_enable callback in exynos_drm_crtc_ops. This solutin will not work with HDMI path as in this case clock is provided by encoder. This patch provides more generic solution allowing to register pipeline clock during initialization in exynos_drm_crtc structure. This way the clock will be easily accessible from both components. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: add helper to get crtc from pipeAndrzej Hajda2-6/+12
The helper abstracts out conversion from pipeline to crtc. Currently it is used in two places, but there will be more uses in next patches. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: do not protect window in plane disableAndrzej Hajda1-5/+0
decon_atomic_begin and decon_atomic_flush protects all windows already. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: reset decon on startAndrzej Hajda1-0/+2
Resetting IP at starting ensures that DECON will be in known state regardless of changes by bootloader. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: fix DECON standalone updateAndrzej Hajda1-7/+8
DECON should be updated after un-protecting windows and after changing output parameters, otherwise image is not displayed in case of HDMI path. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: remove registry dumpAndrzej Hajda1-263/+0
HDMI registry dump unnecessary spoils console and is not very helpful. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add core reset codeAndrzej Hajda1-0/+4
To ensure HDMI-PHY reprogramming will not affect HDMI the latter should be reset. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add PHY power off signal handlingAndrzej Hajda1-0/+4
HDMI-PHY power off bit defaults to 0 in older HDMI versions. In case of Exynos5433 it defaults to 1. To make code consistent across all versions this bit is always unset/set in power on/off sequences. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: fix PHY configuration sequenceAndrzej Hajda1-11/+11
Proper PHY configuration should be as follow: 1. set HDMI clock parents to OSCCLK. 2. reconfigure PHY. 3. set HDMI clock parents to PHY. 4. wait for PLL stabilization. The patch fixes it and consolidates the code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add Exynos5433 supportAndrzej Hajda2-2/+149
HDMI on Exynos5433 differs from previous versions: - different HDMI-PHY settings, - different clocks, - SYSREG registers for enabling reference clock, - MODE_SET register in HDMI-PHY. It is distinguished from other variants by different compatible string. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: stop programming registers with default valuesAndrzej Hajda1-19/+0
There is no point in rewriting default values, as the IP is reset anyway. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: code cleanupAndrzej Hajda1-53/+26
The patch performs following clean-ups: - remove unnecessary white spaces, - remove obvious comments, - fix tabulations, - remove NULL initializators, - re-order driver data. The patch does not change driver's behavior. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: use array specifier for HDMI-PHY configurationsAndrzej Hajda1-16/+18
HDMI-PHY configurations are stored as array pointer and count pair, we can re-use existing helpers to simplify their initialization. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: constify global variablesAndrzej Hajda1-5/+5
These variables should not be modified. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: clock code re-factoringAndrzej Hajda1-54/+140
With incoming support for newer SoCs different set of clocks will be required, depending on IP version. The patch prepares the driver for it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependencyJavier Martinez Canillas1-1/+1
Commit 254d4d111ee1 ("drm/exynos: Add dependency for G2D in Kconfig") made the DRM_EXYNOS_G2D symbol to only be selectable if the s5p-g2d V4L2 driver is not enabled, since both use the same HW IP block. But added the dependency as depends on !VIDEO_SAMSUNG_S5P_G2D which isn't correct since Kconfig expressions are not boolean but tristate. So it will only evaluate to 'n' if VIDEO_SAMSUNG_S5P_G2D=y but it will evaluate to m if VIDEO_SAMSUNG_S5P_G2D=m. This means that both the V4L2 and DRM drivers can be enabled if the former is enabled as a module, which is not what we want. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fix a warning messageDan Carpenter1-1/+1
The "ret = regmap_write()" assignment was missing so this error message is never printed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: mic: fix an error codeDan Carpenter1-0/+1
We accidentally return success instead of a negative error code here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fimd: fix broken dp_clock controlMarek Szyprowski1-1/+1
Commit 1feafd3afd294b03dbbedb8e8f94e0c4db526f10 ("drm/exynos: add exynos5420 support for fimd") add support for Exynos 5420 SoC, but it broke enabling display clock feature because of incorrect condition check. This patch fixes it, so display is working again on platforms requiring display clock control (i.e. Exynos5250-based SNOW platform). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: build fbdev code conditionallyAndrzej Hajda4-15/+36
Fbdev code should be compiled only if CONFIG_DRM_FBDEV_EMULATION option is enabled. The patch fixes exynos-drm code trying to manipulate fbdev data which is not initialized in case CONFIG_DRM_FBDEV_EMULATION is disabled. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_setAndrzej Hajda1-5/+7
exynos_plane_mode_set should use adjusted_mode from the same atomic state as plane state. Otherwise it will result in incorrect behavior in case crtc mode changes. The patch fixes bug with black console framebuffer in case of command mode panels. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.