aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/hisilicon/kirin (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-11-01drm/hisilicon: Ensure LDI regs are properly configured.Peter Griffin1-0/+3
This patch fixes the following soft lockup: BUG: soft lockup - CPU#0 stuck for 23s! [weston:307] On weston idle-timeout the IP is powered down and reset asserted. On weston resume we get a massive vblank IRQ storm due to the LDI registers having lost some state. This state loss is caused by ade_crtc_atomic_begin() not calling ade_ldi_set_mode(). With this patch applied resuming from Weston idle-timeout works well. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Cc: stable@vger.kernel.org Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
2017-10-12drm/kirin: Checking for IS_ERR() instead of NULLDan Carpenter1-2/+2
The of_graph_get_remote_node() function doesn't return error pointers, it returns NULL on error so I've updated the check. Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171005125751.jvtjms62vbtxuvak@mwanda
2017-10-03Merge airlied/drm-next into drm-misc-nextDaniel Vetter2-0/+81
Just catching up with upstream. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-10-01drm/hisilicon/kirin: Use drm_gem_fb_create()Noralf Trønnes1-1/+2
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-4-git-send-email-noralf@tronnes.org
2017-08-29drm: kirin: Add mode_valid logic to avoid mode clocks we can't generateJohn Stultz2-0/+81
Currently the hikey dsi logic cannot generate accurate byte clocks values for all pixel clock values. Thus if a mode clock is selected that cannot match the calculated byte clock, the device will boot with a blank screen. This patch uses the new mode_valid callback (many thanks to Jose Abreu for upstreaming it!) to ensure we don't select modes we cannot generate. Also, since the ade crtc code will adjust the mode in mode_set, this patch also adds a mode_fixup callback which we use to make sure we are validating the mode clock that will eventually be used. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-16drm/kirin: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes1-2/+0
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-2-git-send-email-noralf@tronnes.org
2017-08-08drm: Nuke drm_atomic_helper_plane_set_propertyDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_plane_set_property. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-08-08drm: Nuke drm_atomic_helper_crtc_set_propertyDaniel Vetter1-1/+0
It's dead code because this is now handled in the core. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-5-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-08-01drm: Plumb modifiers through plane initBen Widawsky1-1/+1
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Stone <daniels@collabora.com>
2017-07-26drm/hisilicon: fix build error without fbdev emulationArnd Bergmann2-9/+2
We cannot reference priv->fbdev outside of the #ifdef: drivers/net/virtio_net.c:1881:12: error: 'virtnet_restore_up' defined but not used [-Werror=unused-function] static int virtnet_restore_up(struct virtio_device *vdev) drivers/net/virtio_net.c:1859:13: error: 'virtnet_freeze_down' defined but not used [-Werror=unused-function] static void virtnet_freeze_down(struct virtio_device *vdev) As the #ifdef is a bit annoying here, this removes it entirely and uses an IS_ENABLED() check in it place where needed. Fixes: b4dd9f1ffaba ("drm/hisilicon: Remove custom FB helper deferred setup") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [danvet: One step further, also remove the IS_ENABLED checks, core no-ops out the fb helper functions that the cma helpers use. Discussed with Arnd on dri-devel.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170725180555.3699056-1-arnd@arndb.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-26drm/hisilicon: Remove custom FB helper deferred setupThierry Reding1-10/+10
The FB helper core now supports deferred setup, so the driver's custom implementation can be removed. v2: Dont' resurrect drm_vblank_cleanup. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Thierry Reding <treding@nvidia.com> (v1) Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-5-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-26drm: Convert to using %pOF instead of full_nameRob Herring1-2/+1
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul changed subject prefix and fixed conflict in stm/ltdc.c] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-06-30drm: Convert atomic drivers from CRTC .disable() to .atomic_disable()Laurent Pinchart1-2/+3
The CRTC .disable() helper operation is deprecated for atomic drivers, the new .atomic_disable() helper operation being preferred. Convert all atomic drivers to .atomic_disable() to avoid cargo-cult use of .disable() in new drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com
2017-06-30drm: Add old state pointer to CRTC .enable() helper functionLaurent Pinchart1-2/+3
The old state is useful for drivers that need to perform operations at enable time that depend on the transition between the old and new states. While at it, rename the operation to .atomic_enable() to be consistent with .atomic_disable(), as the .enable() operation is used by atomic helpers only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
2017-06-27Merge remote-tracking branch 'airlied/drm-next' into drm-misc-nextSean Paul1-1/+1
Required for Daniel's drm_vblank_cleanup cleanup
2017-06-26drm/kirin: Drop drm_vblank_cleanupDaniel Vetter1-1/+0
Again we probably want a drm_atomic_helper_shutdown somewhere, but that's a bit more analysis. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-4-daniel.vetter@ffwll.ch
2017-06-06drm: kirin: Fix drm_of_find_panel_or_bridge conversionJohn Stultz1-1/+1
This fixes a regression introduced by ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") that was recently merged, causing HDMI output to not work. For the kirin driver, the port value should be 1 instead of 0, so this oneline patch fixes it and gets graphics working again. Cc: Rob Herring <robh@kernel.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Xinliang Liu <xinliang.liu@linaro.org> Fix-suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1495557626-25285-1-git-send-email-john.stultz@linaro.org
2017-04-06drm: convert drivers to use drm_of_find_panel_or_bridgeRob Herring1-23/+4
Similar to the previous commit, convert drivers open coding OF graph parsing to use drm_of_find_panel_or_bridge instead. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul dropped rockchip changes since they're now obsolete] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2017-04-06drm: convert drivers to use of_graph_get_remote_nodeRob Herring1-29/+1
Convert drivers to use the new of_graph_get_remote_node() helper instead of parsing the endpoint node and then getting the remote device node. Now drivers can just specify the device node and which port/endpoint and get back the connected remote device node. The details of the graph binding are nicely abstracted into the core OF graph code. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Liviu Dudau <liviu.dudau@arm.com> Tested-by: Eric Anholt <eric@anholt.net> Tested-by: Jyri Sarha <jsarha@ti.com> Tested by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2017-03-14drm: Create DEFINE_DRM_GEM_CMA_FOPS and roll it out to driversDaniel Vetter1-11/+1
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
2017-02-21drm: kirin: use vblank hooks in struct drm_crtc_funcsShawn Guo1-6/+4
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-12-git-send-email-shawnguo@kernel.org
2017-02-07drm: remove drm_vblank_no_hw_counter assignment from driver codeShawn Guo1-1/+0
Core code already makes drm_driver.get_vblank_counter hook optional by letting drm_vblank_no_hw_counter be the default implementation for the function hook. So the drm_vblank_no_hw_counter assignment in the driver code becomes redundant and can be removed now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-3-git-send-email-shawnguo@kernel.org
2017-02-02drm: Rely on mode_config data for fb_helper initializationGabriel Krisman Bertazi1-2/+1
Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-01-18drm: kirin: use crtc helper drm_crtc_from_index()Shawn Guo2-7/+4
Use drm_crtc_from_index() to find drm_crtc for given index, so that we do not need to maintain a pointer array in struct kirin_drm_private. Reviewed-by: Xinliang Liu<z.liuxinliang@hisilicon.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-3-git-send-email-shawnguo@kernel.org
2016-12-30drm: Deduplicate driver initialization messageGabriel Krisman Bertazi1-4/+0
Several DRM drivers print the same initialization message right after drm_dev_register, so move that to common code. The exception is i915, which uses its own register handle, so let it keep its own message. Notice that this was tested only with Exynos, but looks simple enough for the other drivers. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161228143216.26821-2-krisman@collabora.co.uk
2016-12-18drm: bridge: Link encoder and bridge in core codeLaurent Pinchart1-4/+1
Instead of linking encoders and bridges in every driver (and getting it wrong half of the time, as many drivers forget to set the drm_bridge encoder pointer), do so in core code. The drm_bridge_attach() function needs the encoder and optional previous bridge to perform that task, update all the callers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Stefan Agner <stefan@agner.ch> # For DCU Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä1-3/+3
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-13drm/hisilicon: Don't set drm_device->platformdevDaniel Vetter3-15/+8
It's deprecated and only should be used by drivers which still use drm_platform_init, not by anyone else. And indeed it's entirely unused and can be nuked. This required a bit more fudging, but I guess kirin_dc_ops really wants to operate on the platform_device, not something else. Also bonus points for implementing abstraction, and then storing the vfunc in a global variable. v2: Don't break the build soooo badly :( Note that the cleanup function is a bit confused: ade_data was never set as drvdata, and calling drm_crtc_cleanup directly is a bug - this is called indirectly through drm_mode_config_cleanup, which calls into crtc->destroy, which already has the call to drm_crtc_cleanup. Which means we can just nuke it. Note this is the 2nd attempt after the first one failed and had to be reverted again in commit 9cd2e854d61ccfa51686f3ed7b0c917708fc641f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Aug 17 13:59:40 2016 +0200 Revert "drm/hisilicon: Don't set drm_device->platformdev" Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161209141944.22121-1-daniel.vetter@ffwll.ch
2016-11-12drm: move allocation out of drm_get_format_name()Eric Engestrom1-4/+3
The function's behaviour was changed in 90844f00049e, without changing its signature, causing people to keep using it the old way without realising they were now leaking memory. Rob Clark also noticed it was also allocating GFP_KERNEL memory in atomic contexts, breaking them. Instead of having to allocate GFP_ATOMIC memory and fixing the callers to make them cleanup the memory afterwards, let's change the function's signature by having the caller take care of the memory and passing it to the function. The new parameter is a single-field struct in order to enforce the size of its buffer and help callers to correctly manage their memory. Fixes: 90844f00049e ("drm: make drm_get_format_name thread-safe") Cc: Rob Clark <robdclark@gmail.com> Cc: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Eric Engestrom <eric@engestrom.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch
2016-11-02drm: define drm_compat_ioctl NULL on CONFIG_COMPAT=n and reduce #ifdefsJani Nikula1-2/+0
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to check for the config everywhere. Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478014844-27454-1-git-send-email-jani.nikula@intel.com
2016-10-25drm: convert DT component matching to component_match_add_release()Russell King1-3/+4
Convert DT component matching to use component_match_add_release(). Acked-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/E1bwo6l-0005Io-Q1@rmk-PC.armlinux.org.uk
2016-09-22drm: Don't swallow error codes in drm_dev_alloc()Tom Gundersen1-2/+2
There are many reasons other than ENOMEM that drm_dev_init() can fail. Return ERR_PTR rather than NULL to be able to distinguish these in the caller. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
2016-08-19drm: Don't implement empty prepare_fb()/cleanup_fb()Laurent Pinchart1-15/+0
The plane .prepare_fb() and .cleanup_fb() helpers are optional, there's no need to implement empty stubs, and no need to explicitly set the function pointers to NULL either. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [danvet: Resolved conflicts with Chris' patch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-08-19drm: Allow drivers to modify plane_state in prepare_fb/cleanup_fbChris Wilson1-2/+2
The drivers have to modify the atomic plane state during the prepare_fb callback so they track allocations, reservations and dependencies for this atomic operation involving this fb. In particular, how else do we set the plane->fence from the framebuffer! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160818180017.20508-1-chris@chris-wilson.co.uk
2016-08-17Revert "drm/hisilicon: Don't set drm_device->platformdev"Daniel Vetter3-9/+11
This reverts commit d25bcfb8c2e18b9b36f037f38be4d4792ebf8d57. I somehow missed that it only compiles on arm64 and broke the driver rather badly. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-08-16drm/hisilicon: Don't set drm_device->platformdevDaniel Vetter3-11/+9
It's deprecated and only should be used by drivers which still use drm_platform_init, not by anyone else. And indeed it's entirely unused and can be nuked. This required a bit more fudging, but I guess kirin_dc_ops really wants to operate on the platform_device, not something else. Also bonus points for implementing abstraction, and then storing the vfunc in a global variable. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Archit Taneja <architt@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-7-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: drop DRIVER_HAVE_IRQ flag for some driversShawn Guo1-1/+1
Since commit 4984979b9b90 ("drm/irq: simplify irq checks in drm_wait_vblank"), the drm driver feature flag DRIVER_HAVE_IRQ is only required for drivers that have an IRQ handler managed by the DRM core. Some drivers, armada, etnaviv, kirin and sti, set this flag without .irq_handler setup in drm_driver. These drivers manage IRQ handler by themselves and the flag DRIVER_HAVE_IRQ makes no sense there. Drop the flag for these drivers to avoid confusion. Signed-off-by: Shawn Guo <shawnguo@kernel.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> (for armada and etnaviv) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471331168-5601-1-git-send-email-shawnguo@kernel.org
2016-08-16drm: remove `const` attribute to hint at caller that they now own the memoryEric Engestrom1-1/+1
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-08-15drm: make drm_get_format_name thread-safeEric Engestrom1-2/+4
Signed-off-by: Eric Engestrom <eric@engestrom.ch> [danvet: Clarify that the returned pointer must be freed with kfree().] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-07-04drm/hisilicon: Fix ADE vblank on/off handlingXinliang Liu1-0/+2
Vblank turn on should be called in crtc's enable callback. And turn off called in crtc's disable callback. Thanks to Daniel Vetter, this bug is reported by him. Reported-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
2016-07-04drm/hisilicon: add select HISI_KIRIN_DW_DSIZoltan Kuscsik1-0/+1
Add select HISI_KIRIN_DW_DSI to Kconfig. The DRM driver depends on dsi sub-driver. Signed-off-by: Zoltan Kuscsik <zoltan.kuscsik@linaro.org> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
2016-07-04drm/hisilicon: Fix return value check in ade_dts_parse()Wei Yongjun1-6/+6
In case of error, the function devm_clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Chen Feng <puck.chen@hisilicon.com>
2016-06-21drm: Lobotomize set_busid nonsense for !pci driversDaniel Vetter1-1/+0
We already have a fallback in place to fill out the unique from dev->unique, which is set to something reasonable in drm_dev_alloc. Which means we only need to have a special set_busid for pci devices, to be able to care the backwards compat code for drm 1.1 around, which libdrm still needs. While developing and testing this patch things blew up in really interesting ways, and the code is rather confusing in naming things between the kernel code, ioctl #defines and libdrm. For the next brave dragon slayer, document all this madness properly in the userspace interface section of gpu.tmpl. v2: Make drm_dev_set_unique static and update kerneldoc. v3: Entire rewrite, plus document what's going on for posterity in the gpu docbook uapi section. v4: Drop accidental amdgpu hunk (Emil). v5: Drop accidental omapdrm vblank counter change (Emil). v6: Rebase on top of the sphinx conversion. Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Emil Velikov <emil.l.velikov@gmail.com> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (virt_gpu) Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-06-21drm/hisilicon: Remove redundant calls to drm_connector_register_all()Chris Wilson1-8/+0
Up to now, the recommendation was for drivers to call drm_dev_register() followed by drm_connector_register_all(). Now that drm_connector_register() is safe against multiple invocations, we can move drm_connector_register_all() to drm_dev_register() and not suffer from any backwards compatibility issues with drivers not following the more rigorous init ordering. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-5-git-send-email-chris@chris-wilson.co.uk
2016-06-09drm/hisilicon: Implement some semblance of vblank event handlingDaniel Vetter1-8/+12
atomic_flush seems to be the right place, but I'm not entirely sure whether this will catch them all. It could be that when disabling the crtc we'll miss the vblank. While at it nuke the dummy functions. v2: Be more robust and either arm, when the CRTC is on, or just send the event out right away. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Archit Taneja <architt@codeaurora.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-5-git-send-email-daniel.vetter@ffwll.ch
2016-05-31drm/hisilicon: Use lockless gem BO free callbackDaniel Vetter1-1/+1
No dev->struct_mutex anywhere to be seen. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-27-git-send-email-daniel.vetter@ffwll.ch
2016-05-11drm/hisilicon: Fix DRM_INFO printed issueXinliang Liu1-1/+2
This patch fixed the bellow no DRM_INFO is printed issue: if (!delay_count) DRM_INFO("phylock and phystopstateclklane is not ready.\n"); There will some printed issues with above info, under certain circumstances: If ((BIT(0) | BIT(2)) & val) is never true, break will not happen and delay_count will be max u32 value (?), and no DRM_INFO is printed. Also if ((BIT(0) | BIT(2)) & val) is true at the last possible loop round, break happens, but now delay_count is already zero ( because of earlier delay_count-- ) and DRM_INFO is erroneously printed. Thanks to Juha Leppänen, he reports to me this issue. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Reported-by: Juha Leppänen <juha_efku@dnainternet.net>
2016-05-11drm/hisilicon: Make kirin_drm_unbind sufficientXinliang Liu1-1/+6
Remove deprecated drm_put_dev. Clean up everything needed in unbind. Thanks to Daniel Vetter, this issue is reported by him. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
2016-05-11drm/hisilicon: Use drm_connector_register_allDaniel Vetter1-30/+1
Use drm_connector_register_all helper to register connectors. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-04-29drm/hisilicon: Add support for external bridgeXinliang Liu1-0/+52
Add support for external HDMI bridge. v8: None. v7: None. v6: None. v5: None. v4: None. v3: - Fix a typo: s/exteranl/external. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Archit Taneja <architt@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.