Age | Commit message (Collapse) | Author | Files | Lines |
|
lmem_size is used to limit the amount of lmem for testing purposes.
Default is to use hardware available lmem size.
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324143123.348590-2-matthew.auld@intel.com
|
|
On error the "new" allocation is not freed, so add the required kfree.
Fixes: 247f8071d5893 ("drm/i915/guc: Pre-allocate output nodes for extraction")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324000439.2370440-1-daniele.ceraolospurio@intel.com
|
|
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
|
|
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
|
|
Print the GuC captured error state register list (string names
and values) when gpu_coredump_state printout is invoked via
the i915 debugfs for flushing the gpu error-state that was
captured prior.
Since GuC could have reported multiple engine register dumps
in a single notification event, parse the captured data
(appearing as a stream of structures) to identify each dump as
a different 'engine-capture-group-output'.
Finally, for each 'engine-capture-group-output' that is found,
verify if the engine register dump corresponds to the
engine_coredump content that was previously populated by the
i915_gpu_coredump function. That function would have copied
the context's vma's including the bacth buffer during the
G2H-context-reset notification that occurred earlier. Perform
this verification check by comparing guc_id, lrca and engine-
instance obtained from the 'engine-capture-group-output' vs a
copy of that same info taken during i915_gpu_coredump. If
they match, then print those vma's as well (such as the batch
buffers).
NOTE: the output format was verified using the gem_exec_capture
IGT test.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-14-alan.previn.teres.alexis@intel.com
|
|
Add a flags parameter through all of the coredump creation
functions. Add a bitmask flag to indicate if the top
level gpu_coredump event is triggered in response to
a GuC context reset notification.
Using that flag, ensure all coredump functions that
read or print mmio-register values related to work submission
or command-streamer engines are skipped and replaced with
a calls guc-capture module equivalent functions to retrieve
or print the register dump.
While here, split out display related register reading
and printing into its own function that is called agnostic
to whether GuC had triggered the reset.
For now, introduce an empty printing function that can
filled in on a subsequent patch just to handle formatting.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-13-alan.previn.teres.alexis@intel.com
|
|
In the rare but possible scenario where we are in the midst of
multiple GuC error-capture (and engine reset) events and the
user also triggers a forced full GT reset or the internal watchdog
triggers the same, intel_guc_submission_reset_prepare's call
to flush_work(&guc->ct.requests.worker) can cause the G2H message
handler to trigger intel_guc_capture_store_snapshot upon
receiving new G2H error-capture notifications. This can happen
despite the prior call to disable_submission(guc);. However,
there's no race-free way for intel_guc_capture_store_snapshot to
know that we are in the midst of a reset. That said, we can never
dynamically allocate the output nodes in this handler. Thus, we
shall pre-allocate a fixed number of empty nodes up front (at the
time of ADS registration) that we can consume from or return to
an internal cached list of nodes.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-12-alan.previn.teres.alexis@intel.com
|
|
- Upon the G2H Notify-Err-Capture event, parse through the
GuC Log Buffer (error-capture-subregion) and generate one or
more capture-nodes. A single node represents a single "engine-
instance-capture-dump" and contains at least 3 register lists:
global, engine-class and engine-instance. An internal link
list is maintained to store one or more nodes.
- Because the link-list node generation happen before the call
to i915_gpu_codedump, duplicate global and engine-class register
lists for each engine-instance register dump if we find
dependent-engine resets in a engine-capture-group.
- When i915_gpu_coredump calls into capture_engine, (in a
subsequent patch) we detach the matching node (guc-id,
LRCA, etc) from the link list above and attach it to
i915_gpu_coredump's intel_engine_coredump structure when have
matching LRCA/guc-id/engine-instance.
Additional notes to be aware of:
- GuC generates the error capture dump into the GuC log buffer but
this buffer is one big log buffer with 3 independent subregions
within it. Each subregion is populated with different content
and used in different ways and timings but all regions operate
behave as independent ring buffers. Each guc-log subregion
(general-logs, crash-dump and error- capture) has it's own
guc_log_buffer_state that contain independent read and write
pointers.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-11-alan.previn.teres.alexis@intel.com
|
|
Add intel_guc_capture_output_min_size_est function to
provide a reasonable minimum size for error-capture
region before allocating the shared buffer.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-10-alan.previn.teres.alexis@intel.com
|
|
GuC log buffer regions for debug-log-events, crash-dumps and
error-state-capture are all part of a single bo allocation that
also includes the guc_log_buffer_state structures. Now that we
support it, increase the size allocation for error-capture.
Since the error-capture region is accessed at non-deterministic
times (as part of GuC triggered context reset) while debug-log-
events region is accessed as part of relay logging or during
debugfs triggered dumps, move the mapping and unmapping of the
shared buffer into intel_guc_log_create and intel_guc_log_destroy
so that it's always mapped throughout life of GuC operation.
Additionally, while here, update the guc log region layout
diagram to follow the order according to the enum definition
as per the GuC interface.
NOTE: A future effort to visit (part of baseline code) is that
buf_addr should be updated to be a io_sys_map and use the
io_sys_map wrapper functions to access the various GuC log
buffer regions.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-9-alan.previn.teres.alexis@intel.com
|
|
For the sake of better code readibility, change previous
relay logging function names with "capture_logs" to
"copy_debug_logs" to differentiate from error capture
functions that will use a different region of the same buffer.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-8-alan.previn.teres.alexis@intel.com
|
|
Add GuC's error capture output structures and definitions as how
they would appear in GuC log buffer's error capture subregion after
an error state capture G2H event notification.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-7-alan.previn.teres.alexis@intel.com
|
|
Abstract out a Gen9 register list as the default for all other
platforms we don't yet formally support GuC submission on.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-6-alan.previn.teres.alexis@intel.com
|
|
Add additional DG2 registers for GuC error state capture.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-5-alan.previn.teres.alexis@intel.com
|
|
Add the ability for runtime allocation and freeing of
steered register list extentions that depend on the
detected HW config fuses.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-4-alan.previn.teres.alexis@intel.com
|
|
Add device specific tables and register lists to cover different engines
class types for GuC error state capture for XE_LP products.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-3-alan.previn.teres.alexis@intel.com
|
|
Update GuC ADS size allocation to include space for
the lists of error state capture register descriptors.
Then, populate GuC ADS with the lists of registers we want
GuC to report back to host on engine reset events. This list
should include global, engine-class and engine-instance
registers for every engine-class type on the current hardware.
Ensure we allocate a persistent store for the register lists
that are populated into ADS so that we don't need to allocate
memory during GT resets when GuC is reloaded and ADS population
happens again.
NOTE: Start with a sample static table of register lists to
layout the framework before adding real registers in subsequent
patch. This static register tables are a different format from
the ADS populated list.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-2-alan.previn.teres.alexis@intel.com
|
|
Replace all occurrence of cache_clflush_range with drm_clflush_virt_range.
This will prevent compile errors on non-x86 platforms.
Signed-off-by: Michael Cheng <michael.cheng@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321223819.72833-6-michael.cheng@intel.com
|
|
Use drm_clflush_virt_range instead of directly invoking clflush. This
will prevent compiler errors when building for non-x86 architectures.
v2(Michael Cheng): Remove extra clflush
v3(Michael Cheng): Remove memory barrier since drm_clflush_virt_range
takes care of it.
v4(Michael Cheng): Get the size of value and not the size of the pointer
when passing in execlists->csb_write. Thanks to Matt
Roper for pointing this out.
Signed-off-by: Michael Cheng <michael.cheng@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321223819.72833-4-michael.cheng@intel.com
|
|
Drop invalidate_csb_entries and directly call drm_clflush_virt_range.
This allows for one less function call, and prevent complier errors when
building for non-x86 architectures.
v2(Michael Cheng): Drop invalidate_csb_entries function and directly
invoke drm_clflush_virt_range. Thanks to Tvrtko for the
sugguestion.
v3(Michael Cheng): Use correct parameters for drm_clflush_virt_range.
Thanks to Tvrtko for pointing this out.
v4(Michael Cheng): Simplify &execlists->csb_status[0] to
execlists->csb_status. Thanks to Matt Roper for the
suggestion.
Signed-off-by: Michael Cheng <michael.cheng@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321223819.72833-3-michael.cheng@intel.com
|
|
Re-work intel_write_status_page to use drm_clflush_virt_range. This
will prevent compiler errors when building for non-x86 architectures.
Signed-off-by: Michael Cheng <michael.cheng@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321223819.72833-2-michael.cheng@intel.com
|
|
The initialization is there only to silence the compiler, but use the
correct initializer for i915_reg_t.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135955.922791-1-jani.nikula@intel.com
|
|
Change functions that always return '0' to be void type.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321122759.227091-1-andi.shyti@linux.intel.com
|
|
Throttling here refers to the GT frequency being clipped. Each of
the throttle reason attributes will have a 0 or 1 value depending
upon whether there is throttling and also the specific reason for
it.
The following is a brief description of the sysfs throttle
frequency attributes added:
- throttle_reason_status: when set indicates that there is GT
frequency clipping.
- throttle_reason_pl1: when set indicates that PBM PL1 (platform
or package PL1) has caused GT frequency clipping.
- throttle_reason_pl2: when set indicates that PBM PL2 or PL3
(platform or package PL2 or PL3) has caused GT frequency
clipping.
- throttle_reason_pl4: when set indicates that PL4 or IccMax has
caused GT frequency clipping.
- throttle_reason_thermal: when set indicates that Thermal event
has caused GT frequency clipping.
- throttle_reason_prochot: when set indicates that PROCHOT# has
caused GT frequency clipping.
- throttle_reason_ratl: when set indicates that Running Average
Thermal Limit has caused GT frequency clipping.
- throttle_reason_vr_thermalert: when set indicates that Hot VR
(any processor VR) has caused GT frequency clipping.
- throttle_reason_vr_tdc: when set indicates that VR TDC
(Thermal Design Current) has caused GT frequency clipping.
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Dale B Stimson <dale.b.stimson@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-8-andi.shyti@linux.intel.com
|
|
Now tiles have their own sysfs interfaces under the gt/
directory. Because RPS is a property that can be configured on a
tile basis, then each tile should have its own interface
The new sysfs structure will have a similar layout for the 4 tile
case:
/sys/.../card0
├── gt
│ ├── gt0
│ │ ├── id
│ │ ├── rc6_enable
│ │ ├── rc6_residency_ms
│ │ ├── rps_act_freq_mhz
│ │ ├── rps_boost_freq_mhz
│ │ ├── rps_cur_freq_mhz
│ │ ├── rps_max_freq_mhz
│ │ ├── rps_min_freq_mhz
│ │ ├── rps_RP0_freq_mhz
│ │ ├── rps_RP1_freq_mhz
│ │ └── rps_RPn_freq_mhz
. .
. .
. .
│ └── gtN
│ ├── id
│ ├── rc6_enable
│ ├── rc6_residency_ms
│ ├── rps_act_freq_mhz
│ ├── rps_boost_freq_mhz
│ ├── rps_cur_freq_mhz
│ ├── rps_max_freq_mhz
│ ├── rps_min_freq_mhz
│ ├── rps_RP0_freq_mhz
│ ├── rps_RP1_freq_mhz
│ └── rps_RPn_freq_mhz
├── gt_act_freq_mhz -+
├── gt_boost_freq_mhz |
├── gt_cur_freq_mhz | Original interface
├── gt_max_freq_mhz +─-> kept as existing ABI;
├── gt_min_freq_mhz | it points to gt0/
├── gt_RP0_freq_mhz |
├── gt_RP1_freq_mhz |
└── gt_RPn_freq_mhz -+
The existing interfaces have been kept in their original location
to preserve the existing ABI. They act on all the GTs: when
writing they loop through all the GTs and write the information
on each interface. When reading they provide the average value
from all the GTs.
This patch is not really adding exposing new interfaces (new
ABI) other than adapting the existing one to more tiles. In any
case this new set of interfaces will be a basic tool for system
managers and administrators when using i915.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-7-andi.shyti@linux.intel.com
|
|
Now tiles have their own sysfs interfaces under the gt/
directory. Because RC6 is a property that can be configured on a
tile basis, then each tile should have its own interface
The new sysfs structure will have a similar layout for the 4 tile
case:
/sys/.../card0
├── gt
│ ├── gt0
│ │ ├── id
│ │ ├── rc6_enable
│ │ ├── rc6_residency_ms
. . .
. . .
. .
│ └── gtN
│ ├── id
│ ├── rc6_enable
│ ├── rc6_residency_ms
│ .
│ .
│
└── power/ -+
├── rc6_enable | Original interface
├── rc6_residency_ms +-> kept as existing ABI;
. | it multiplexes over
. | the GTs
-+
The existing interfaces have been kept in their original location
to preserve the existing ABI. They act on all the GTs: when
reading they provide the average value from all the GTs.
This patch is not really adding exposing new interfaces (new
ABI) other than adapting the existing one to more tiles. In any
case this new set of interfaces will be a basic tool for system
managers and administrators when using i915.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-6-andi.shyti@linux.intel.com
|
|
Now that we have tiles we want each of them to have its own
interface. A directory "gt/" is created under "cardN/" that will
contain as many diroctories as the tiles.
In the coming patches tile related interfaces will be added. For
now the sysfs gt structure simply has an id interface related
to the current tile count.
The directory structure will follow this scheme:
/sys/.../card0
└── gt
├── gt0
│ └── id
:
:
└─- gtN
└── id
This new set of interfaces will be a basic tool for system
managers and administrators when using i915.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-5-andi.shyti@linux.intel.com
|
|
On a multi-tile platform, each tile has its own registers + GGTT
space, and BAR 0 is extended to cover all of them.
Up to four GTs are supported in i915->gt[], with slot zero
shadowing the existing i915->gt0 to enable source compatibility
with legacy driver paths. A for_each_gt macro is added to iterate
over the GTs and will be used by upcoming patches that convert
various parts of the driver to be multi-gt aware.
Only the primary/root tile is initialized for now; the other
tiles will be detected and plugged in by future patches once the
necessary infrastructure is in place to handle them.
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-4-andi.shyti@linux.intel.com
|
|
The "gt_is_root(struct intel_gt *gt)" helper return true if the
gt is the root gt, which means that its id is 0. Return false
otherwise.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-3-andi.shyti@linux.intel.com
|
|
With the upcoming multitile support each tile will have its own
local memory. Mark the current LMEM with the suffix '0' to
emphasise that it belongs to the root tile.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-2-andi.shyti@linux.intel.com
|
|
Add logical mapping for VDBOXs. This mapping is required for
split-frame workloads, which otherwise fail with
00000000-F8C53528: [GUC] 0441-INVALID_ENGINE_SUBMIT_MASK
... if the application is using the logical id to reorder the engines and
then using it for the batch buffer submission. It's not a big problem on
media version 11 and 12 as they have only 2 instances of VCS and the
logical to physical mapping is monotonically increasing - if the
application is not using the logical id.
Changing it for the previous platforms allows the media driver
implementation for the next ones (12.50 and above) to be the same,
checking the logical id. It should also not introduce any bug for the
old versions of userspace not checking the id.
The mapping added here is the complete map needed by XEHPSDV. Previous
platforms with only 2 instances will just use a partial map and should
still work.
v2: Remove static from map variable (José)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
[ Extend the mapping to media versions 11 and 12 and give proper
justification in the commit message why ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-2-lucas.demarchi@intel.com
|
|
Starting with DG2, preemption can no longer be controlled using userspace
on a per-context basis. Instead, the hardware only allows us to enable or
disable preemption in a global, system-wide basis. Also, we lose the
ability to specify the preemption granularity (such as batch-level vs
command-level vs object-level).
v2 (MattR):
- Move debugfs interface to a separate patch. (Jani)
v3 (MattR):
- Drop the debugfs support completely for now.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318021051.2073847-1-matthew.d.roper@intel.com
|
|
Implement support for fetching the hardware description table from the
GuC. The call is made twice - once without a destination buffer to
query the size and then a second time to fill in the buffer.
The table is stored in the GT structure so that it can be fetched once
at driver load time. Keeping inside a GuC structure would mean it
would be release and reloaded on a GuC reset (part of a full GT
reset). However, the table does not change just because the GT has been
reset and the GuC reloaded. Also, dynamic memory allocations inside
the reset path are a problem.
Note that the table is only available on ADL-P and later platforms.
v2 (John's v2 patch):
* Move to GT level to avoid memory allocation during reset path (and
unnecessary re-read of the table on a reset).
v5 (of Jordan's posting):
* Various changes made by Jordan and recommended by Michal
- Makefile ordering
- Adjust "struct intel_guc_hwconfig hwconfig" comment
- Set Copyright year to 2022 in intel_guc_hwconfig.c/.h
- Drop inline from hwconfig_to_guc()
- Replace hwconfig param with guc in __guc_action_get_hwconfig()
- Move zero size check into guc_hwconfig_discover_size()
- Change comment to say zero size offset/size is needed to get size
- Add has_guc_hwconfig to devinfo and drop has_table()
- Change drm_err to notice in __uc_init_hw() and use %pe
v6 (of Jordan's posting):
* Added a couple more small changes recommended by Michal
* Merge in John's v2 patch, but note:
- Using drm_notice as recommended by Michal
- Reverted Michal's suggestion of using devinfo
v7 (of Jordan's posting):
* Change back to drm_err as preferred by John
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220306232157.1174335-2-jordan.l.justen@intel.com
|
|
Add a generic interface for allocating an object at some specific
offset, and convert stolen over. Later we will want to hook this up to
different backends.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-4-matthew.auld@intel.com
|
|
Just pass along the probed io_size. The backend should be able to
utilize the entire range here, even if some of it is non-mappable.
It does leave open with what to do with stolen local-memory.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-1-matthew.auld@intel.com
|
|
Upcoming patches will need to steer writes to multicast registers as
well as reading them.
Although the setting of the 'multicast' bit should only really matter
for write operations (reads always operate in a unicast manner and give
us the result from one specific instance), Wa_22013088509 suggests that
we leave the multicast bit enabled when performing read operations, so
we follow suit here.
Cc: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314234203.799268-4-matthew.d.roper@intel.com
|
|
GuC has its own steering mechanism and can't use the default set by i915,
so we need to provide the steering information that the FW will need to
save/restore registers while processing an engine reset. The GUC
interface allows us to do so as part of the register save/restore list
and it requires us to specify the steering for all multicast register, even
those that would be covered by the default setting for cpu access. Given
that we do not distinguish between registers that do not need steering and
registers that are guaranteed to work the default steering, we set the
steering for all entries in the guc list that do not require a special
steering (e.g. mslice) to the default settings; this will cost us a few
extra writes during engine reset but allows us to keep the steering
logic simple.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314234203.799268-3-matthew.d.roper@intel.com
|
|
Add a new 'steering' node in each gt's debugfs directory that tells
whether we're using explicit steering for various types of MCR ranges
and, if so, what MMIO ranges it applies to.
We're going to be transitioning away from implicit steering, even for
slice/dss steering soon, so the information reported here will become
increasingly valuable once that happens.
v2:
- Adding missing 'static' on intel_steering_types[] (Jose, sparse)
v3:
- "static const char *" -> "static const char * const" (sparse)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315170250.954380-1-matthew.d.roper@intel.com
|
|
sseu_dev_info is already a pretty large structure which will likely
continue to grow when future platforms increase potential DSS and EU
counts. Let's switch the stack placement of this structure in debugfs
with a dynamic allocation.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315020805.844962-1-matthew.d.roper@intel.com
|
|
When running on Xe_HP or beyond, let's use an updated format for
describing topology in our error state dumps and debugfs to give a
more accurate view of the hardware:
- Just report DSS directly without the legacy "slice0" output that's no
longer meaningful.
- Indicate whether each DSS is accessible for geometry and/or compute.
- Rename "rcs_topology" to "sseu_topology" since the information
reported is common to both RCS and CCS engines now.
v2:
- Name static functions in a more consistent manner. (Lucas)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311225459.385515-2-matthew.d.roper@intel.com
|
|
Xe_HP removed "slice" as a first-class unit in the hardware design.
Instead we now have a single pool of subslices (which are now referred
to as "DSS") that different hardware units have different ways of
grouping ("compute slices," "geometry slices," etc.). For the purposes
of topology representation, we treat Xe_HP-based platforms as having a
single slice that contains all of the platform's DSS. There's no need
to allocate storage space for (max legacy slices * max dss); let's
update some of our macros to minimize the storage requirement for sseu
topology. We'll also document some of the constants to make it a little
bit more clear what they represent.
v2:
- s/LEGACY/HSW/ in macro names. (Lucas)
- Rename MAX() to SSEU_MAX() to avoid any potential clashes with other
definitions elsewhere. Unfortunately max()/max_t() from
linux/minmax.h cannot be used in this context. (Lucas)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311225459.385515-1-matthew.d.roper@intel.com
|
|
We shouldn't really be keeping track of how many SFC_DONE registers
our platforms can have, but rather how many SFC hardware units there can
be (each SFC unit will have one corresponding SFC_DONE register). So
drop the stray GEN12_SFC_DONE_MAX definition we had in the register
definition file and replace it with an I915_MAX_SFC that follows the
pattern we use for other hardware units. Note that our hardware has a
2:1:1 ratio of VD:VE:SFC, and as far as we know that pattern should
carry forward to future platforms, so we'll define it as #VCS/2.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311062835.163744-1-matthew.d.roper@intel.com
|
|
Currently this will enforce both 2M alignment and padding for any LMEM
pages inserted into the GGTT. However, this was only meant to be applied
to the compact-pt layout with the ppGTT. For the GGTT we can reduce the
alignment and padding to 64K.
Bspec: 45015
Fixes: 87bd701ee268 ("drm/i915: enforce min GTT alignment for discrete cards")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303100229.839282-1-matthew.auld@intel.com
(cherry picked from commit c64fa77dd4609cb8cd53fbb73b02434ae8212c7a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Platforms with FlatCCS do not use auxiliary planes for compression
control data and thus do not need traditional aux table invalidation
(and the registers no longer even exist).
Original-author: CQ Tang
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301052952.1706597-1-matthew.d.roper@intel.com
|
|
Currently this will enforce both 2M alignment and padding for any LMEM
pages inserted into the GGTT. However, this was only meant to be applied
to the compact-pt layout with the ppGTT. For the GGTT we can reduce the
alignment and padding to 64K.
Bspec: 45015
Fixes: 87bd701ee268 ("drm/i915: enforce min GTT alignment for discrete cards")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303100229.839282-1-matthew.auld@intel.com
|
|
vms are not getting properly closed. Rather than fixing that,
Remove the vm open count and instead rely on the vm refcount.
The vm open count existed solely to break the strong references the
vmas had on the vms. Now instead make those references weak and
ensure vmas are destroyed when the vm is destroyed.
Unfortunately if the vm destructor and the object destructor both
wants to destroy a vma, that may lead to a race in that the vm
destructor just unbinds the vma and leaves the actual vma destruction
to the object destructor. However in order for the object destructor
to ensure the vma is unbound it needs to grab the vm mutex. In order
to keep the vm mutex alive until the object destructor is done with
it, somewhat hackishly grab a vm_resv refcount that is released late
in the vma destruction process, when the vm mutex is no longer needed.
v2: Address review-comments from Niranjana
- Clarify that the struct i915_address_space::skip_pte_rewrite is a hack
and should ideally be replaced in an upcoming patch.
- Remove an unneeded continue in clear_vm_list and update comment.
v3:
- Documentation update
- Commit message formatting
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-2-thomas.hellstrom@linux.intel.com
|
|
If RCS is not enumerated, GuC will return invalid parameters.
Make sure we do not send RCS supported when we have not enumerated
it.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303223435.2793124-2-matthew.d.roper@intel.com
|
|
In the past we've always assumed that an RCS engine is present on every
platform. However now that we have compute engines there may be
platforms that have CCS engines but no RCS, or platforms that are
designed to have both, but have the RCS engine fused off.
Various engine-centric initialization that only needs to be done a
single time for the group of RCS+CCS engines can't rely on being setup
with the RCS now; instead we add a I915_ENGINE_FIRST_RENDER_COMPUTE flag
that will be assigned to a single engine in the group; whichever engine
has this flag will be responsible for some of the general setup
(RCU_MODE programming, initialization of certain workarounds, etc.).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303223435.2793124-1-matthew.d.roper@intel.com
|
|
Include linux/highmem.h and linux/swap.h explicitly where needed so we
can drop the linux/i2c.h include from i915_drv.h where it pulled in the
dependencies implicitly.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303181931.1661767-5-jani.nikula@intel.com
|
|
Some G2H handlers were reading the context id field from the payload
before checking the payload met the minimum length required.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-9-John.C.Harrison@Intel.com
|