aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_hdmi.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-01-09drm/i915: drop all drmP.h includesJani Nikula1-1/+0
Needs just a few additional includes here and there. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190108082709.3748-1-jani.nikula@intel.com
2018-11-29drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPsManasi Navare1-2/+19
Infoframes are used to send secondary data packets. This patch adds support for DSC Picture parameter set secondary data packets in the existing write_infoframe helpers. v3: * Unused variables cleanup (Ville) v2: * Rebase on drm-tip (Manasi) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-9-manasi.d.navare@intel.com
2018-11-20Merge drm/drm-next into drm-intel-next-queuedJani Nikula1-1/+2
Pull in v4.20-rc3 via drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-15drm/i915/bios: rename intel_aux_ch() to intel_bios_port_aux_ch()Jani Nikula1-1/+1
Conform to function naming in intel_bios.c. Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181115105237.1237-1-jani.nikula@intel.com
2018-11-02drm/i915: Allow "max bpc" property to limit pipe_bppRadhakrishna Sripada1-0/+5
Use the newly added "max bpc" connector property to limit pipe bpp. V3: Use drm_connector_state to access the "max bpc" property V4: Initialize the drm property, add suuport to DP(Ville) V5: Use the property in the connector and fix CI failure(Ville) V6: Use the core function to attach max_bpc property, remove the redundant clamping of pipe bpp based on connector info V7: Fix Checkpatch warnings V9: Cleanup connected_sink_max_bpp and fix initial value in DP(Ville) V12: Fix debug message(Ville) V13: Remove the redundant check and simplify the check logic(Stan) V14: Fix the check in connected_sink_max_bpp(Stan) v15 (From Manasi): Add missing break (Stan) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Kishore Kadiyala <kishore.kadiyala@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023014400.16055-1-manasi.d.navare@intel.com
2018-11-02drm/i915: Init aux_ch for HDMI ports tooImre Deak1-0/+1
From ICL onwards DDI/TypeC ports - even in HDMI static mode - need to know which AUX CH belongs to them, so initialize aux_ch for those ports too. For consistency do this for all HDMI ports, not only for DDI/TypeC ones. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-4-imre.deak@intel.com
2018-11-01drm/i915/icl: Implement Display WA_1405510057Radhakrishna Sripada1-1/+10
Display WA_1405510057 asks to not enable YUV 420 HDMI 10bpc when horizontal blank size mod 8 reminder is 2. V2: Rebase(r-b: Anusha) V3: crtc_state->s/ycbcr420/output_format/ Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-2-radhakrishna.sripada@intel.com
2018-10-26drm/i915/hdmi: Detect HDMI 2.0 monitors using multiple EDID capabilitiesClint Taylor1-1/+2
HDMI 2.0 monitors may not support SCDC and still be able to accept VICs above 63. Use multiple EDID capbilities to determine if the SINK is actually an HDMI 2.0 device. The QD980B HDMI 2.0 Analyzer generates unique EDIDs during CTS tests that don't contain a HDMI Forum VSDB if the block is not used during the test. The current HDMI AVI infoframe code only uses the SCDC supported information in the HDMI Forum VSDB to determine if the sink is HDMI 2.0. This patch adds a check for YCbCr420 present in the EDID supported formats as well as the existing SCDC supported check. HDMI 2.0 CTS HF1-51 test fails on the QD980B. V2: Make check for display_info->color formats == YCbCR420 and SCDC Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107894 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540415073-5102-1-git-send-email-clinton.a.taylor@intel.com
2018-10-24drm/i915: Move the DDC/AUX failure msgs to debug logRamalingam C1-9/+9
When a HDCP authentication is in progress, if the display sink is hot unplugged, all DDC/AUX transaction related to the HDCP authentication will fail. This patch moves those kind of HDCP DDC/AUX failures into the debug logs instead of errors. v2: Bksv invalid state is provided as debug msg Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1540291288-22185-1-git-send-email-ramalingam.c@intel.com
2018-10-24drm/i915/debugfs: hdcp capability of a sinkRamalingam C1-1/+15
Add a debugfs entry for providing the hdcp capabilities of the sink connected to the HDCP capable connectors. v2: Squashed the sink's hdcp capability into this patch. [Daniel] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1540286550-20399-4-git-send-email-ramalingam.c@intel.com
2018-10-15drm/i915: Write AVI infoframes for MCA LSPCONShashank Sharma1-0/+2
LSPCON is a DP branch device, so LSPCON vendors define specific methods to pass AVI infoframes to the the chip. This patch adds: - a generic wrapper function for writing AVI infoframes for all LSPCON devices. - a vendor specific function to wrire AVI infoframes into MCA LSPCON devices. V2: Rebase V3: Added r-b from Maarten V4: Rebase V5: Rebase V6: Rebase V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Added the retry logic, with 50ms incremental delays while writing AVI IF V10: Changed the return value check V11: Fixed checkpatch warning V12: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-6-git-send-email-shashank.sharma@intel.com
2018-10-15drm/i915: Add AVI infoframe support for LSPCONShashank Sharma1-3/+10
In order to pass AVI infoframes to LSPCON devices, a source has to write them in a vendor recommended method and location. This patch series: - adds generic LSPCON infoframe setup functions. - registers these functions into existing AVI infoframe framework. - triggers these functions from modeset sequence. Next patches in the series will add vendor specific code. V2: Added new parameter to align with new definition of drm_hdmi_avi_infoframe_quant_range V3: Added r-b from Maarten (for V2) Added new parameter output_format in struct lspcon to accommodate Ville's review comments on last patch of the series V4: Addressed Ville's review comment - Do not add output_format in LSPCON state, as its non-atomic. Add this into CRTC state (added in a later patch). V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase V11: Accommodated rebasing changes in intel_git_port fptrs (set_infoframes and infoframe_enabled) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-5-git-send-email-shashank.sharma@intel.com
2018-10-15drm/i915: Add CRTC output format YCBCR 4:4:4Shashank Sharma1-0/+2
This patch adds support for YCBCR 4:4:4 CRTC output format. To do this, this patch extends the existing YCBCR 4:2:0 framework by: - Adding new parameter in for YCBCR 4:4:4 enum crtc_iutput_format. - Adding case for YCBCR 4:4:4 in while setting AVI infoframes. - Adding necessary checks in modeset sequence. V3: Added this patch in the series V4: Added r-b from Maarten (for v3) Addressed review comment from Ville: Do not use (config->output_format > CRTC_OUTPUT_RGB) V5: Rebase V6: Rebase and small change, to accommodate changes in patch 2 V7: Fixed checkpatch alignment warnings V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comment from Ville Missing output_format_str[INTEL_OUTPUT_FORMAT_YCBCR444] Added Ville's R-B. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-3-git-send-email-shashank.sharma@intel.com
2018-10-15drm/i915: Add CRTC output format YCBCR 4:2:0Shashank Sharma1-3/+3
Currently, we are using a bool in CRTC state (state->ycbcr420), to indicate modeset, that the output format is YCBCR 4:2:0. Now in order to support other YCBCR formats, we will need more such flags. This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the CRTC output formats and then plugs it during the modeset. V3: Added this patch in the series, to address review comments from second patchset. V4: Added r-b from Maarten (on v3) Addressed review comments from Ville: - Change the enum name to intel_output_format. - Start the enum value (INVALID) from 0 instaed of 1. - Set the crtc's output_format to RGB in encoder's compute_config. V5: Broke previous patch 1 into two parts, - first patch to add CRTC output format in general - second patch (this one) to add YCBCR 4:2:0 output format specifically. - Use ARRAY_SIZE(format_str) for output format validity check (Ville) V6: Added a separate function to calculate crtc_state->output_format, and calling it from various get_config function (Fix CI build warning) V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comments from Ville: - Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE. - Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary. - No need to get CRTC YCBCR config, for pre-BDW functions. Added Ville's r-b. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-2-git-send-email-shashank.sharma@intel.com
2018-10-15drm/i915: Introduce CRTC output formatShashank Sharma1-0/+1
This patch adds an enum "intel_output_format" to represent the output format of a particular CRTC. This enum will be used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format during the atomic modeset calculations. V5: - Created this separate patch to introduce and init output_format. - Initialize parameters of output_format_str respectively (Jani N). - Call it intel_output_format than crtc_output_format(Ville). - Set output format in pipe_config for every encoder (Ville). - Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville) V6: Rebase V7: Fixed alignment warnings (checkpatch) V8: Another check[atch warning for alignment V9: Rebase V10: Rebase on top of DSI restructure V11: Addressed review comment from Ville - Set CRTC format for pre-HSW get_pipe_config() function too. Added Ville's R-B Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-1-git-send-email-shashank.sharma@intel.com
2018-10-09drm/i915: add a common connector type independent destroy hookJani Nikula1-3/+2
Almost all of the connector destroy functions do the same thing. The differences are in the edid, detect_edid and panel cleanups, but those are safely NULL when not initialized. Roll out a common connector destroy hook. Inspired by commit bc3213c44415 ("drm/i915: Drop the eDP check from intel_dp_connector_destroy()"). Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181009141103.20387-1-jani.nikula@intel.com
2018-10-01drm/i915: Pass intel_encoder to infoframe functionsVille Syrjälä1-66/+63
Make life simpler by passing around intel_encoder instead of drm_encoder. @r1@ identifier F =~ "infoframe"; identifier I, M; @@ F( - struct drm_encoder *I + struct intel_encoder *I , ...) { <... ( - I->M + I->base.M | - I + &I->base ) ...> } @r2@ identifier F =~ "infoframe"; identifier I; type T, ST; @@ ST { ... T (*F)( - struct drm_encoder *I + struct intel_encoder *encoder , ...); ... }; @@ identifier r1.F; expression E; @@ F( - E + to_intel_encoder(E) ,...) @@ identifier r2.F; expression E, X; @@ ( X.F( - E + to_intel_encoder(E) ,...) | X->F( - E + to_intel_encoder(E) ,...) ) @@ expression E; @@ ( - to_intel_encoder(&E->base) + E | - to_intel_encoder(&E->base.base) + &E->base ) @@ identifier D, M; expression E; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D; expression E; type T; @@ - T D = enc_to_dig_port(E); ... when != D Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-10-ville.syrjala@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-10-01drm/i915: Use memmove() for punching the hole into infoframesVille Syrjälä1-3/+1
Replace the hand rolled memmove() with the real thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-9-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-09-11Merge tag 'drm-intel-next-2018-09-06-2' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie1-3/+7
Merge tag 'gvt-next-2018-09-04' drm-intel-next-2018-09-06-1: UAPI Changes: - GGTT coherency GETPARAM: GGTT has turned out to be non-coherent for some platforms, which we've failed to communicate to userspace so far. SNA was modified to do extra flushing on non-coherent GGTT access, while Mesa will mitigate by always requiring WC mapping (which is non-coherent anyway). - Neuter Resource Streamer uAPI: There never really were users for the feature, so neuter it while keeping the interface bits for compatibility. This is a long due item from past. Cross-subsystem Changes: - Backmerge of branch drm-next-4.19 for DP_DPCD_REV_14 changes Core Changes: - None Driver Changes: - A load of Icelake (ICL) enabling patches (Paulo, Manasi) - Enabled full PPGTT for IVB,VLV and HSW (Chris) - Bugzilla #107113: Distribute DDB based on display resolutions (Mahesh) - Bugzillas #100023,#107476,#94921: Support limited range DP displays (Jani) - Bugzilla #107503: Increase LSPCON timeout (Fredrik) - Avoid boosting GPU due to an occasional stall in interactive workloads (Chris) - Apply GGTT coherency W/A only for affected systems instead of all (Chris) - Fix for infinite link training loop for faulty USB-C MST hubs (Nathan) - Keep KMS functional on Gen4 and earlier when GPU is wedged (Chris) - Stop holding ppGTT reference from closed VMAs (Chris) - Clear error registers after error capture (Lionel) - Various Icelake fixes (Anusha, Jyoti, Ville, Tvrtko) - Add missing Coffeelake (CFL) PCI IDs (Rodrigo) - Flush execlists tasklet directly from reset-finish (Chris) - Fix LPE audio runtime PM (Chris) - Fix detection of out of range surface positions (GLK/CNL) (Ville) - Remove wait-for-idle for PSR2 (Dhinakaran) - Power down existing display hardware resources when display is disabled (Chris) - Don't allow runtime power management if RC6 doesn't exist (Chris) - Add debugging checks for runtime power management paths (Imre) - Increase symmetry in display power init/fini paths (Imre) - Isolate GVT specific macros from i915_reg.h (Lucas) - Increase symmetry in power management enable/disable paths (Chris) - Increase IP disable timeout to 100 ms to avoid DRM_ERROR (Imre) - Fix memory leak from HDMI HDCP write function (Brian, Rodrigo) - Reject Y/Yf tiling on interlaced modes (Ville) - Use a cached mapping for the physical HWS on older gens (Chris) - Force slow path of writing relocations to buffer if unable to write to userspace (Chris) - Do a full device reset after being wedged (Chris) - Keep forcewake counts over reset (in case of debugfs user) (Imre, Chris) - Avoid false-positive errors from power wells during init (Imre) - Reset engines forcibly in exchange of declaring whole device wedged (Mika) - Reduce context HW ID lifetime in preparation for Icelake (Chris) - Attempt to recover from module load failures (Chris) - Keep select interrupts over a reset to avoid missing/losing them (Chris) - GuC submission backend improvements (Jakub) - Terminate context images with BB_END (Chris, Lionel) - Make GCC evaluate GGTT view struct size assertions again (Ville) - Add selftest to exercise suspend/hibernate code-paths for GEM (Chris) - Use a full emulation of a user ppgtt context in selftests (Chris) - Exercise resetting in the middle of a wait-on-fence in selftests (Chris) - Fix coherency issues on selftests for Baytrail (Chris) - Various other GEM fixes / self-test updates (Chris, Matt) - GuC doorbell self-tests (Daniele) - PSR mode control through debugfs for IGTs (Maarten) - Degrade expected WM latency errors to DRM_DEBUG_KMS (Chris) - Cope with errors better in MST link training (Dhinakaran) - Fix WARN on KBL external displays (Azhar) - Power well code cleanups (Imre) - Fixes to PSR debugging (Dhinakaran) - Make forcewake errors louder for easier catching in CI (WARNs) (Chris) - Fortify tiling code against programmer errors (Chris) - Bunch of fixes for CI exposed corner cases (multiple authors, mostly Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907105446.GA22860@jlahtine-desk.ger.corp.intel.com
2018-08-28drm/i915: Free write_buf that we allocated with kzalloc.Rodrigo Vivi1-2/+6
We use kzalloc to allocate the write_buf that we use for i2c transfer on hdcp write. But it seems that we are forgetting to free the memory that is not needed after i2c transfer is completed. Reported-by: Brian J Wood <brian.j.wood@intel.com> Fixes: 2320175feb74 ("drm/i915: Implement HDCP for HDMI") Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180823205136.31310-1-rodrigo.vivi@intel.com (cherry picked from commit 62d3a8deaa10b8346d979d0dabde56c33b742afa) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-08-24drm/i915/icl: implement the tc/legacy HPD {dis,}connect flowsPaulo Zanoni1-3/+8
Unlike the other ports, TC ports are not available to use as soon as we get a hotplug. The TC PHYs can be shared between multiple controllers: display, USB, etc. As a result, handshaking through FIA is required around connect and disconnect to cleanly transfer ownership with the controller and set the type-C power state. This patch implements the flow sequences described by our specification. We opt to grab ownership of the ports as soon as we get the hotplugs in order to simplify the interactions and avoid surprises in the user space side. We may consider changing this in the future, once we improve our testing capabilities on this area. v2: * This unifies the DP and HDMI patches so we can discuss everything at once so people looking at random single patches can actually understand the direction. * I found out the spec was updated a while ago. There's a small difference in the connect flow and the patch was updated for that. * Our spec also now gives a good explanation on what is really happening. As a result, comments were added. * Add some more comments as requested by Rodrigo (Rodrigo). v3: * Downgrade a DRM_ERROR that shouldn't ever happen but we can't act on in case it does (Chris). BSpec: 21750, 4250. Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180801173441.9789-1-paulo.r.zanoni@intel.com
2018-08-23drm/i915: Free write_buf that we allocated with kzalloc.Rodrigo Vivi1-2/+6
We use kzalloc to allocate the write_buf that we use for i2c transfer on hdcp write. But it seems that we are forgetting to free the memory that is not needed after i2c transfer is completed. Reported-by: Brian J Wood <brian.j.wood@intel.com> Fixes: 2320175feb74 ("drm/i915: Implement HDCP for HDMI") Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180823205136.31310-1-rodrigo.vivi@intel.com
2018-08-20Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds1-0/+13
Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
2018-07-27Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', 'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-mergedLee Jones1-0/+19
Immutable branch (mfd, chrome) due for the v4.19 window Immutable Branch which moves the cros_ec_i2c and cros_ec_spi transport drivers from mfd to platform/chrome. Changes in arm are a simple rename in defconfigs. Change in input is a rename in help text.
2018-07-13drm/i915: hdmi: add CEC notifier to intel_hdmiNeil Armstrong1-0/+13
This patchs adds the cec_notifier feature to the intel_hdmi part of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate between each HDMI ports. The changes will allow the i915 HDMI code to notify EDID and HPD changes to an eventual CEC adapter. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-28Merge tag 'drm-intel-next-2018-06-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie1-30/+74
Chris is doing many reworks that allow us to get full-ppgtt supported on all platforms back to HSW. As well many other fix and improvements, Including: - Use GEM suspend when aborting initialization (Chris) - Change i915_gem_fault to return vm_fault_t (Chris) - Expand VMA to Non gem object entities (Chris) - Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris) - Other page directory handling fixes and improvements for gen6 (Chris) - Other gtt clean-up removing redundancies and unused checks (Chris) - Reorder aliasing ppgtt fini (Chris) - Refactor of unsetting obg->mm.pages (Chris) - Apply batch location restrictions before pinning (Chris) - Ringbuffer fixes for context restore (Chris) - Execlist fixes on freeing error pointer on allocation error (Chris) - Make closing request flush mandatory (Chris) - Move GEM sanitize from resume_early to resume (Chris) - Improve debug dumps (Chris) - Silent compiler for selftest (Chris) - Other execlists changes to improve hangcheck and reset. - Many gtt page directory fixes and improvements (Chris) - Reorg context workarounds (Chris) - Avoid ERR_PTR dereference on selftest (Chris) Other GEM related work: - Stop trying to reset GPU if reset failed (Mika) - Add HW workaround for KBL to fix GPU reset (Mika) - Fix context ban and hang accounting for client (Mika) - Fixes on OA perf (Michel, Jani) - Refactor on GuC log mechanisms (Piotr) - Enable provoking vertex fix on Gen9 system (Kenneth) More ICL patches for Display enabling: - ICL - 10-bit support for HDMI (RK) - ICL - Start adding TBT PLL (Paulo) - ICL - DDI HDMK level selection (Manasi) - ICL - GMBUS GPIO pin mapping fix (Mahesh) - ICL - Adding DP_AUX_E support (James) - ICL - Display interrupts handling (DK) Other display fixes and improvements: - Fix sprite destination color keying on SKL+ (Ville) - Fixes and improvements on PCH detection, specially for non PCH systems (Jani) - Document PCH_NOP (Lucas) - Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville) - Opregion and ACPI cleanup and organization (Jani) - Kill delays when activation psr (Rodrigo) - ...and a consequent fix of the psr activation flow (DK) - Fix HDMI infoframe setting (Imre) - Fix Display interrupts and modes on old gens (Ville) - Start switching to kernel unsigned int types (Jani) - Introduction to Amber Lake and Whiskey Lake platforms (Jose) - Audio clock fixes for HBR3 (RK) - Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo) - Remove unused timespec_to_jiffies_timeout function (Arnd) - Increase the scope of PSR wake fix for other VBTs out there (Vathsala) - Improve debug msgs with prop name/id (Ville) - Other clean up on unecessary cursor size defines (Ville) - Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville) - Make ELD pointers constant (Jani) - Fix for PSR VBT parse (Colin) - Add warn about unsupported CDCLK rates (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 21 Jun 2018 07:12:10 AM AEST # gpg: using RSA key FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA Link: https://patchwork.freedesktop.org/patch/msgid/20180625165622.GA21761@intel.com
2018-06-22Merge tag 'drm-misc-next-2018-06-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-6/+11
drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma
2018-06-20drm/i915/icl: Add 10-bit support for hdmiRadhakrishna Sripada1-16/+48
Starting Icelake silicon supports 10-bpc hdmi to support certain media workloads. Currently hdmi supports 8 and 12 bpc. Plumbed in support for 10 bit hdmi. Cc: James Ausmus <james.ausmus@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180522002558.29262-18-paulo.r.zanoni@intel.com
2018-06-19drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSIVille Syrjälä1-0/+6
When encountering a connector with the scaling mode property both intel and modesetting ddxs sometimes add tons of DBLSCAN modes to the output's mode list. The idea presumably being that since the output will be going through the panel fitter anyway we can pretend to use any kind of mode. Sadly that means we can't reject user modes with the DBLSCAN flag until we know whether we're going to be using the panel's native mode or the user mode directly. Doing otherwise means X clients using xf86vidmode/xrandr will get a protocol error (and often self terminate as a result) when the kernel refuses to use the requested mode with the DBLSCAN flag. To undo the regression we'll move the DBLSCAN checks into the connector->mode_valid() and encoder->compute_config() hooks. Cc: stable@vger.kernel.org Cc: Vito Caputo <vcaputo@pengaru.com> Reported-by: Vito Caputo <vcaputo@pengaru.com> Fixes: e995ca0b8139 ("drm/i915: Provide a device level .mode_valid() hook") References: https://lkml.org/lkml/2018/5/21/715 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180524125403.23445-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106804 Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl> (cherry picked from commit e4dd27aadd205417a2e9ea9902b698a0252ec3a0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-18drm/i915/hdmi: switch to kernel unsigned int typesJani Nikula1-7/+7
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try to stick to kernel types at least where it's more prevalent. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d8b79de3d52e1fcaeabf3abfbb2ed99c4397ff2b.1528794959.git.jani.nikula@intel.com
2018-06-15drm/i915: s/IS_G4X && !IS_GM45/IS_G45/Ville Syrjälä1-1/+1
We have IS_G45 these days. Let's use it instead of the 'IS_G4X && !IS_GM45' construct. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180614180500.2565-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-06-14drm/i915/ddi: Removed unused var from hsw_write_infoframe()Imre Deak1-3/+0
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180613170710.15080-6-imre.deak@intel.com
2018-06-14drm/i915/ddi: Check transcoder instead of port when setting HDMI infoframeImre Deak1-2/+11
The only requirement by BSpec for setting the HDMI infoframes is on DDI platforms to do that before enabling the HDMI transcoder function, see VIDEO_DIP_CTL bit 16. Accordingly check for the transcoder function disabled state instead of the port's disabled state on DDI platforms. This is needed by the next patch as it will set the infoframe during crtc disabling where the port is still enabled. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180613170710.15080-4-imre.deak@intel.com
2018-06-13drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSIVille Syrjälä1-0/+6
When encountering a connector with the scaling mode property both intel and modesetting ddxs sometimes add tons of DBLSCAN modes to the output's mode list. The idea presumably being that since the output will be going through the panel fitter anyway we can pretend to use any kind of mode. Sadly that means we can't reject user modes with the DBLSCAN flag until we know whether we're going to be using the panel's native mode or the user mode directly. Doing otherwise means X clients using xf86vidmode/xrandr will get a protocol error (and often self terminate as a result) when the kernel refuses to use the requested mode with the DBLSCAN flag. To undo the regression we'll move the DBLSCAN checks into the connector->mode_valid() and encoder->compute_config() hooks. Cc: stable@vger.kernel.org Cc: Vito Caputo <vcaputo@pengaru.com> Reported-by: Vito Caputo <vcaputo@pengaru.com> Fixes: e995ca0b8139 ("drm/i915: Provide a device level .mode_valid() hook") References: https://lkml.org/lkml/2018/5/21/715 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180524125403.23445-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106804 Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
2018-06-12drm/i915/icl: fix gmbus gpio pin mappingMahesh Kumar1-1/+1
ICP has GPIO pin 1/2 mapped to combo-phy ports & GPIO pins 9/10/11/12 mapped to tc ports[1-4]. This patch defines GPIOCTL registers for GPIO pins 9-12 & uses them in GPIO pin mapping table. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180612002512.29783-1-paulo.r.zanoni@intel.com
2018-05-17drm/i915: Clean up SDVO pipe select bitsVille Syrjälä1-21/+4
Clean up the SDVO pipe select bits. To make the whole situation a bit less ugly we'll start to share the same code between .get_hw_state() and the port state asserts. v2: Order the defines shift,mask,value (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-3-ville.syrjala@linux.intel.com
2018-05-17i915: content-type property for HDMI connectorStanislav Lisovskiy1-6/+11
Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-03-23drm/i915: Don't spew errors when resetting HDMI scrambling/bit clock ratio failsVille Syrjälä1-24/+16
When we're disabling the HDMI link we try to reset the scrambling and TMDS bit clock ratio back to the default values. This will fail if the sink has already been disconnected. Thus we should not print an error message when resetting the scrambling/TMDS bit clock ratio fail during disable. During enable we do want the error, and during disable we may still want to know what happended for debug purposes so let's use DRM_DEBUG_KMS() there. v2: Remember them consts v3: Go back to just one function and print the errors/debugs from callers (Shashank) Cc: Shashank Sharma <shashank.sharma@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105644 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105655 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322154707.22103-1-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2018-03-06drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPDVille Syrjälä1-0/+1
The LG 4k TV I have doesn't deassert HPD when I turn the TV off, but when I turn it back on it will pulse the HPD line. By that time it has forgotten everything we told it about scrambling and the clock ratio. Hence if we want to get a picture out if it again we have to tell it whether we're currently sending scrambled data or not. Implement that via the encoder->hotplug() hook. v2: Force a full modeset to not follow the HDMI 2.0 spec more closely (Shashank) [pushed with whitespace fixes to make sparse happy] Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180117192149.17760-1-ville.syrjala@linux.intel.com
2018-02-16Merge tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-0/+250
Add HDCP support to i915 drm driver. * tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits) drm/i915: fix misalignment in HDCP register def drm/i915: Reauthenticate HDCP on failure drm/i915: Detect panel's hdcp capability drm/i915: Optimize HDCP key load drm/i915: Retry HDCP bksv read drm/i915: Connector info in HDCP debug msgs drm/i915: Stop encryption for repeater with no sink drm/i915: Handle failure from 2nd stage HDCP auth drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS drm/i915: Restore HDCP DRM_INFO when with no downstream drm/i915: Check for downstream topology errors drm/i915: Start repeater auth on READY/CP_IRQ drm/i915: II stage HDCP auth for repeater only drm/i915: Extending HDCP for HSW, BDW and BXT+ drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link drm/i915: Only disable HDCP when it's active drm/i915: Don't allow HDCP on PORT E/F drm/i915: Implement HDCP for DisplayPort drm/i915: Implement HDCP for HDMI drm/i915: Add function to output Aksv over GMBUS ...
2018-02-16Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-3/+0
drm-misc-next for 4.17: UAPI Changes: - drm/vc4: Expose performance counters to userspace (Boris) Cross-subsystem Changes: - MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus) Core Changes: - Only use swiotlb when necessary (Chunming) Driver Changes: - drm/panel: Add support for ARM Versatile panels (Linus) - pl111: Improvements around versatile panel support (Linus) ---------------------------------------- Tagged on 2018-02-06: drm-misc-next for 4.17: UAPI Changes: - Validate mode flags + type (Ville) - Deprecate unused mode flags PIXMUX, BCAST (Ville) - Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville) Cross-subsystem Changes: - MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel) Core Changes: - gem: Export gem functions for drivers to use (Samuel) - bridge: Introduce bridge timings in drm_bridge (Linus) - dma-buf: Allow exclusive fence to be bundled in fence array when calling reservation_object_get_fences_rcu (Christian) - dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi) - fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime) - mode: Various cleanups + add new device-wide .mode_valid hook (Ville) - atomic: Fix state leak when non-blocking commits fail (Leo) NOTE: IIRC, this was cross-picked to -fixes so it might fall out - crc: Allow polling on the data fd (Maarten) Driver Changes: - bridge/vga-dac: Add THS8134* support (Linus) - tinydrm: Various MIPI DBI improvements/cleanups (Noralf) - bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian) - drm/sun4i: Add Display Engine frontend support (Maxime) - drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime) - various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville) - stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe) Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Samuel Li <Samuel.Li@amd.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> * tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits) drm/radeon: only enable swiotlb path when need v2 drm/amdgpu: only enable swiotlb alloc when need v2 drm: add func to get max iomem address v2 drm/vc4: Expose performance counters to userspace drm: Print the pid when debug logging an ioctl error. drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw drm/stm: ltdc: add non-alpha color formats drm/bridge/synopsys: dsi: Add 1.31 version support drm/bridge/synopsys: dsi: Add read feature drm/pl111: Support multiple endpoints on the CLCD drm/pl111: Support variants with broken VBLANK drm/pl111: Support variants with broken clock divider drm/pl111: Handle the Versatile RGB/BGR565 mode drm/pl111: Properly detect the ARM PL110 variants drm/panel: Add support for ARM Versatile panels drm/panel: Device tree bindings for ARM Versatile panels drm/bridge: Rename argument from crtc to bridge drm/crc: Add support for polling on the data fd. drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle ...
2018-01-30drm/i915/cnl: Add HPD support for Port F.Rodrigo Vivi1-1/+1
On CNP boards that are using DDI F, bit 25 (SDE_PORTE_HOTPLUG_SPT) is representing the Digital Port F hotplug line when the Digital Port F hotplug detect input is enabled. v2: Reuse all existent structure instead of adding a new HPD_PORT_F pointing to pin of port E. v3: Use IS_CNL_WITH_PORT_F so we can start upstreaming this right now. If that SKU ever get a proper name we come back and update it. v4: Rebase on top of digital connected port using encoder instead of port. v5: Moved IS_CNL_WITH_PORT_F definition to the PCI IDs patch. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-8-rodrigo.vivi@intel.com
2018-01-30drm/i915/cnl: Add right GMBUS pin number for HDMI on Port F.Rodrigo Vivi1-0/+3
On CNP Pin 3 is for misc of Port F usage depending on the configuration. For CNL that uses Port F, pin 3 is the one. v2: Make it more generic and update commit message. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-6-rodrigo.vivi@intel.com
2018-01-29drm/i915: Provide a device level .mode_valid() hookVille Syrjälä1-3/+0
We never support certain mode flags etc. Reject those early on in the mode_config.mode_valid() hook. That allows us to remove some duplicated checks from the connector .mode_valid() hooks, and it guarantees that we never see those flags even from user mode as the mode_config.mode_valid() hooks gets executed for those as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-11-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-01-19drm/i915/icp: add ICP gmbus and gpio supportAnusha Srivatsa1-0/+33
In ICP, there are three TC ports and 3 DDI ports. v2: - Correct Pin mapping. v3: - Update pin mapping into per platform implementation rather than previous approach of port wise mapping. v4: - Update GMBUS_NUM_PINS (Paulo) v5: - rebase. v6: - Update function name, GMBUS_PIN_NUM (Paulo) v7 (from Paulo): - Make it apply. v8 (from Paulo): - Maintain consistent if ladder ordering. Suggested by: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-8-paulo.r.zanoni@intel.com
2018-01-19drm/i915: Ignore TMDS clock limit for DP++ when EDID override is setAbdiel Janulgue1-1/+4
4K modes testing by using dummy EDID data has never been working properly on boxes with DP++ (dual-mode) adaptors. The reason for this is that those modes got pruned during hdmi mode validation. intel_hdmi_mode_valid returns CLOCK_HIGH because the pixel clock reported by the 4k mode is higher than dual port TMDS clock limit. However 4k injection does work properly on machines that don't have DP++ adapters because the mode is never validated against the DP++ TMDS clock limit. v2: Don't detect the DP++ limits when we're testing using overridden EDIDs. Make sure to check for the override condition after respecting the value of drm_dp_dual_mode_detect (Jani Nikula). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101649 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171215102055.11729-1-abdiel.janulgue@linux.intel.com
2018-01-18drm/i915: Extending HDCP for HSW, BDW and BXT+Ramalingam C1-2/+1
This patch extends the Key load process and hdcp initialization for few more capable intel platforms i.e. HSW, BDW and BXT+. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> [seanpaul fixed checkpatch issues] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1516254488-4971-2-git-send-email-ramalingam.c@intel.com
2018-01-09drm/i915: Don't allow HDCP on PORT E/FSean Paul1-1/+2
Port E doesn't have HDCP support, and Port F is disabled. Don't setup the hdcp shim on those. Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180109185401.16911-1-seanpaul@chromium.org
2018-01-09drm/i915: Try EDID bitbanging on HDMI after failed readStefan Brüns1-3/+11
The ACK/NACK implementation as found in e.g. the G965 has the falling clock edge and the release of the data line after the ACK for the received byte happen at the same time. This is conformant with the I2C specification, which allows a zero hold time, see footnote [3]: "A device must internally provide a hold time of at least 300 ns for the SDA signal (with respect to the V IH(min) of the SCL signal) to bridge the undefined region of the falling edge of SCL." Some HDMI-to-VGA converters apparently fail to adhere to this requirement and latch SDA at the falling clock edge, so instead of an ACK sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the transfer. The bitbanging releases the data line for the ACK only 1/4 bit time after the falling clock edge, so a slave will see the correct value no matter if it samples at the rising or the falling clock edge or in the center. Fallback to bitbanging is already done for the CRT connector. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685 Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58daca3@rwthex-w2-a.rwth-ad.de
2018-01-08drm/i915: Implement HDCP for HDMISean Paul1-0/+250
This patch adds HDCP support for HDMI connectors by implementing the intel_hdcp_shim. Nothing too special, just a bunch of DDC reads/writes. Changes in v2: - Rebased on drm-intel-next Changes in v3: - Initialize new worker Changes in v4: - Remove SKL_ prefix from most register names (Daniel) - Wrap sanity checks in WARN_ON (Daniel) - Consolidate the enable/disable functions into one toggle fn - Use intel_hdcp_init (Daniel) Changes in v5: - checkpatch whitespace nits Changes in v6: - None Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-9-seanpaul@chromium.org
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.