aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/selftests (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-08-19drm/i915/selftests: Avoid passing a random 0 into ilog2George Spelvin1-8/+10
igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number s>>12. Once in 2 million seeds, this is zero and ilog2 summons the nasal demons. There was an attempt to handle this case with a max(), but that's too late; ms could already be something bizarre. Given that the low 12 bits of s and ms are always zero, it's a lot simpler just to divide them by 4096, then everything fits into 32 bits, and we can easily generate a random number 1 <= s <= 0x1fffff. Fixes: 14d1b9a6247c ("drm/i915: buddy allocator") Signed-off-by: George Spelvin <lkml@sdf.org> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200325192429.GA8865@SDF.ORG Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 21118e8e56479ef33460fbd63a5ad0535843b666) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-08-19drm/i915: Copy default modparams to mock i915_deviceChris Wilson1-0/+3
Since we use the module parameters stored inside the drm_i915_device itself, we need to ensure the mock i915_device also sets up the right defaults. Fixes: 8a25c4be583d ("drm/i915/params: switch to device specific parameters") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728150600.4509-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 98ef067453709444a264939940f7b3a5dfdfa09e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-08-11Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-2/+8
Pull iommu updates from Joerg Roedel: - Remove of the dev->archdata.iommu (or similar) pointers from most architectures. Only Sparc is left, but this is private to Sparc as their drivers don't use the IOMMU-API. - ARM-SMMU updates from Will Deacon: - Support for SMMU-500 implementation in Marvell Armada-AP806 SoC - Support for SMMU-500 implementation in NVIDIA Tegra194 SoC - DT compatible string updates - Remove unused IOMMU_SYS_CACHE_ONLY flag - Move ARM-SMMU drivers into their own subdirectory - Intel VT-d updates from Lu Baolu: - Misc tweaks and fixes for vSVA - Report/response page request events - Cleanups - Move the Kconfig and Makefile bits for the AMD and Intel drivers into their respective subdirectory. - MT6779 IOMMU Support - Support for new chipsets in the Renesas IOMMU driver - Other misc cleanups and fixes (e.g. to improve compile test coverage) * tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits) iommu/amd: Move Kconfig and Makefile bits down into amd directory iommu/vt-d: Move Kconfig and Makefile bits down into intel directory iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu iommu: Add gfp parameter to io_pgtable_ops->map() iommu: Mark __iommu_map_sg() as static iommu/vt-d: Rename intel-pasid.h to pasid.h iommu/vt-d: Add page response ops support iommu/vt-d: Report page request faults for guest SVA iommu/vt-d: Add a helper to get svm and sdev for pasid iommu/vt-d: Refactor device_to_iommu() helper iommu/vt-d: Disable multiple GPASID-dev bind iommu/vt-d: Warn on out-of-range invalidation address iommu/vt-d: Fix devTLB flush for vSVA iommu/vt-d: Handle non-page aligned address iommu/vt-d: Fix PASID devTLB invalidation iommu/vt-d: Remove global page support in devTLB flush iommu/vt-d: Enforce PASID devTLB field mask iommu: Make some functions static iommu/amd: Remove double zero check ...
2020-07-14drm/i915/selftest: Fix an error code in live_noa_gpr()Dan Carpenter1-0/+1
The error code needs to be set on this path. It currently returns success. Fixes: ed2690a9ca89 ("drm/i915/selftest: Check that GPR are restored across noa_wait") Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200714143652.GA337376@mwanda
2020-07-13drm/i915/selftest: fix an error return path where err is not being setColin Ian King1-0/+1
There is an error condition where err is not being set and an uninitialized garbage value in err is being returned. Fix this by assigning err to an appropriate error return value before taking the error exit path. Addresses-Coverity: ("Uninitialized scalar value") Fixes: ed2690a9ca89 ("drm/i915/selftest: Check that GPR are restored across noa_wait") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200713142551.423649-1-colin.king@canonical.com
2020-07-10drm/i915/selftest: Check that GPR are restored across noa_waitChris Wilson1-0/+131
Perf implements a GPU delay (noa_wait) by looping until the CS timestamp has passed a certain point. This use MI_MATH and the general purpose registers of the user's context, and since it is clobbering the user state it must carefully save and restore the user's data around the noa_wait. We can verify this by loading some values in the GPR that we know will be clobbered by the noa_wait, and then inspecting the GPR after the noa_wait completes and confirming that they have been restored. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-2-chris@chris-wilson.co.uk
2020-07-08drm/i915: Move the engine mask to intel_gt_infoDaniele Ceraolo Spurio2-2/+3
Since the engines belong to the GT, move the runtime-updated list of available engines to the intel_gt struct. The original mask has been renamed to indicate it contains the maximum engine list that can be found on a matching device. In preparation for other info being moved to the gt in follow up patches (sseu), introduce an intel_gt_info structure to group all gt-related runtime info. v2: s/max_engine_mask/platform_engine_mask (tvrtko), fix selftest Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-5-daniele.ceraolospurio@intel.com
2020-07-03drm/i915: Export ppgtt_bind_vmaChris Wilson1-4/+8
Reuse the ppgtt_bind_vma() for aliasing_ppgtt_bind_vma() so we can reduce some code near-duplication. The catch is that we need to then pass along the i915_address_space and not rely on vma->vm, as they differ with the aliasing-ppgtt. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703102519.26539-1-chris@chris-wilson.co.uk
2020-06-30iommu/vt-d: Use dev_iommu_priv_get/set()Joerg Roedel1-2/+8
Remove the use of dev->archdata.iommu and use the private per-device pointer provided by IOMMU core code instead. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200625130836.1916-3-joro@8bytes.org
2020-06-25Merge drm/drm-next into drm-intel-next-queuedJani Nikula1-9/+23
Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments"). Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-06-18drm/i915/gt: Always report the sample time for busy-statsChris Wilson1-22/+41
Return the monotonic timestamp (ktime_get()) at the time of sampling the busy-time. This is used in preference to taking ktime_get() separately before or after the read seqlock as there can be some large variance in reported timestamps. For selftests trying to ascertain that we are reporting accurate to within a few microseconds, even a small delay leads to the test failing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617130916.15261-2-chris@chris-wilson.co.uk
2020-06-18drm/i915/selftests: Enable selftesting of busy-statsChris Wilson1-18/+3
A couple of very simple tests to ensure that the basic properties of per-engine busyness accounting [0% and 100% busy] are faithful. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617130916.15261-1-chris@chris-wilson.co.uk
2020-06-16drm/i915/gt: Incrementally check for rewindingChris Wilson1-0/+1
In commit 5ba32c7be81e ("drm/i915/execlists: Always force a context reload when rewinding RING_TAIL"), we placed the check for rewinding a context on actually submitting the next request in that context. This was so that we only had to check once, and could do so with precision avoiding as many forced restores as possible. For example, to ensure that we can resubmit the same request a couple of times, we include a small wa_tail such that on the next submission, the ring->tail will appear to move forwards when resubmitting the same request. This is very common as it will happen for every lite-restore to fill the second port after a context switch. However, intel_ring_direction() is limited in precision to movements of upto half the ring size. The consequence being that if we tried to unwind many requests, we could exceed half the ring and flip the sense of the direction, so missing a force restore. As no request can be greater than half the ring (i.e. 2048 bytes in the smallest case), we can check for rollback incrementally. As we check against the tail that would be submitted, we do not lose any sensitivity and allow lite restores for the simple case. We still need to double check upon submitting the context, to allow for multiple preemptions and resubmissions. Fixes: 5ba32c7be81e ("drm/i915/execlists: Always force a context reload when rewinding RING_TAIL") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Bruce Chang <yu.bruce.chang@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200609151723.12971-1-chris@chris-wilson.co.uk (cherry picked from commit e36ba817fa966f81fb1c8d16f3721b5a644b2fa9) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-13drm/i915/selftests: Trim execlists runtimeChris Wilson1-2/+2
Reduce the smoke depth by trimming the number of contexts, repetitions and wait times. This is in preparation for a less greedy scheduler that tries to be fair across contexts, resulting in a great many more context switches. A thousand context switches may be 50-100ms, causing us to timeout as the HW is not fast enough to complete the deep smoketests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200607222108.14401-5-chris@chris-wilson.co.uk
2020-06-10drm/i915/gt: Incrementally check for rewindingChris Wilson1-0/+1
In commit 5ba32c7be81e ("drm/i915/execlists: Always force a context reload when rewinding RING_TAIL"), we placed the check for rewinding a context on actually submitting the next request in that context. This was so that we only had to check once, and could do so with precision avoiding as many forced restores as possible. For example, to ensure that we can resubmit the same request a couple of times, we include a small wa_tail such that on the next submission, the ring->tail will appear to move forwards when resubmitting the same request. This is very common as it will happen for every lite-restore to fill the second port after a context switch. However, intel_ring_direction() is limited in precision to movements of upto half the ring size. The consequence being that if we tried to unwind many requests, we could exceed half the ring and flip the sense of the direction, so missing a force restore. As no request can be greater than half the ring (i.e. 2048 bytes in the smallest case), we can check for rollback incrementally. As we check against the tail that would be submitted, we do not lose any sensitivity and allow lite restores for the simple case. We still need to double check upon submitting the context, to allow for multiple preemptions and resubmissions. Fixes: 5ba32c7be81e ("drm/i915/execlists: Always force a context reload when rewinding RING_TAIL") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Bruce Chang <yu.bruce.chang@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200609151723.12971-1-chris@chris-wilson.co.uk
2020-06-05drm/i915: Fix comments mentioning typo in IS_ENABLED()Kees Cook3-5/+5
This has no code changes, but the typo is clearly getting copy/pasted, so better to avoid this now and fix the typo. IS_ENABLED() takes full names, and must have the "CONFIG_" prefix. Reported-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/lkml/b08611018fdb6d88757c6008a5c02fa0e07b32fb.camel@perches.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/202006050718.9D4FCFC2E@keescook
2020-06-03drm/i915: Drop i915_request.i915 backpointerChris Wilson2-8/+8
We infrequently use the direct i915 backpointer from the i915_request, so do we really need to waste the space in the struct for it? 8 bytes from the most frequently allocated struct vs an 3 bytes and pointer chasing in using rq->engine->i915? Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200602220953.21178-1-chris@chris-wilson.co.uk
2020-05-29drm/i915/gem: Give each object class a friendly nameChris Wilson2-0/+2
Name the object classes and their offspring for easier lockdep debugging. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200529183204.16850-2-chris@chris-wilson.co.uk
2020-05-20Merge tag 'drm-intel-next-2020-05-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie5-22/+54
UAPI Changes: - drm/i915: Show per-engine default property values in sysfs By providing the default values configured into the kernel via sysfs, it is much more convenient for userspace to restore those sane defaults, or at least know what are considered good baseline. This is useful, for example, to cleanup after any failed userspace prior to commencing new jobs. Cross-subsystem Changes: - video/hdmi: Add Unpack only function for DRM infoframe - Includes pull request gvt-next-2020-05-12 Driver Changes: - Restore Cherryview back to full-ppgtt (Chris, Mika) - Document locking guidelines for i915 (Chris, Daniel, Joonas) - Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris) - Display WA #1105: Require linear fb stride to be multiple of 512 bytes on gen9/glk (Ville) - Add Wa_14010685332 for ICP/ICL (Matt R) - Restrict w/a 1607087056 for EHL/JSL (Swathi) - Fix interrupt handling for DP AUX transactions on Tigerlake (Imre) - Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika) - Fix HDC pipeline flush hardware bit on Gen12 (Mika) - Flush L3 when flushing render on Gen12 (Mika) - Invalidate aux table entries forcibly between BB on Gen12 (Mika) - Add aux table invalidate for all engines on Gen12 (Mika) - Force pte cacheline to main memory Gen8+ (Mika) - Add and enable TGL+ SAGV support (Stanislav) - Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian) - Replace zero-length array with flexible-array (Gustavo) - Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris) - Remove wait priority boosting (Chris) - Keep driver module referenced when PMU is active (Chris) - Sanitize RPS interrupts upon resume (Chris) - Extend pcode read timeout to 20 ms (Chris) - Wait for ACT sent before enabling MST pipe (Ville) - Extend support to async relocations to SNB (Chris) - Remove CNL pre-prod workarounds (Ville) - Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan) - Record the active CCID from before reset (Chris) - Mark concurrent submissions with a weak-dependency (Chris) - Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel) - Prevent using semaphores to chain up to external fences (Chris) - Fix GLK watermark calculations (Ville) - Emit await(batch) before MI_BB_START (Chris) - Reset execlists registers before HWSP (Chris) - Drop no-semaphore boosting in favor of fast timeslicing (Chris) - Fix enabled infoframe states of lspcon (Gwan-gyeong) - Program DP SDPs on pipe updates (Gwan-gyeong) - Stop sending DP SDPs on ddi disable (Gwan-gyeong) - Store CS timestamp frequency in Hz (Ville) - Remove unused HAS_FWTABLE macro (Pascal) - Use batchbuffer chaining for relocations to save ring space (Chris) - Try different engines for relocs if MI ops not supported (Chris, Tvrtko) - Lazily acquire the device wakeref for freeing objects (Chris) - Streamline display code arithmetics around rounding etc. (Ville) - Use bw state for per crtc SAGV evaluation (Stanislav) - Track active_pipes in bw_state (Stanislav) - Nuke mode.vrefresh usage (Ville) - Warn if the FBC is still writing to stolen on removal (Chris) - Added new PCode commands prepping for QGV rescricting (Stansilav) - Stop holding onto the pinned_default_state (Chris) - Propagate error from completed fences (Chris) - Ignore submit-fences on the same timeline (Chris) - Pull waiting on an external dma-fence into its routine (Chris) - Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris) - Mark up the racy read of execlists->context_tag (Chris) - Tidy up the return handling for completed dma-fences (Chris) - Introduce skl_plane_wm_level accessor (Stanislav) - Extract SKL SAGV checking (Stanislav) - Make active_pipes check skl specific (Stanislav) - Suspend tasklets before resume sanitization (Chris) - Remove redundant exec_fence (Chris) - Mark the addition of the initial-breadcrumb in the request (Chris) - Transfer old virtual breadcrumbs to irq_worker (Chris) - Read the DP SDPs from the video DIP (Gwan-gyeong) - Program DP SDPs with computed configs (Gwan-gyeong) - Add state readout for DP VSC and DP HDR Metadata Infoframe SDP (Gwan-gyeong) - Add compute routine for DP PSR VSC SDP (Gwan-gyeong) - Use new DP VSC SDP compute routine on PSR (Gwan-gyeong) - Restrict qgv points which don't have enough bandwidth. (Stanislav) - Nuke pointless div by 64bit (Ville) - Static checker code fixes (Nathan, Mika, Chris) - Add logging function for DP VSC SDP (Gwan-gyeong) - Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the crtc state dump (Gwan-gyeong) - Make timeslicing explicit engine property (Chris, Tvrtko) - Selftest and debugging improvements (Chris) - Align variable names with BSpec (Ville) - Tidy up gen8+ breadcrumb emission code (Chris) - Turn intel_digital_port_connected() in a vfunc (Ville) - Use stashed away hpd isr bits in intel_digital_port_connected() (Ville) - Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200515160703.GA19043@jlahtine-desk.ger.corp.intel.com
2020-05-19drm/i915/selftests: Measure dispatch latencyChris Wilson1-0/+823
A useful metric of the system's health is how fast we can tell the GPU to do various actions, so measure our latency. v2: Refactor all the instruction building into emitters. v3: Mark the error handling if not perfect, at least consistent. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200519130802.4067-1-chris@chris-wilson.co.uk
2020-05-14drm/i915: Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}()Ville Syrjälä1-2/+1
Pull the code to do the CS timestamp ns<->ticks conversion into helpers and use them all over. The check in i915_perf_noa_delay_set() seems a bit dubious, so we switch it to do what I assume it wanted to do all along (ie. make sure the resulting delay in CS timestamp ticks doesn't exceed 32bits)? Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-5-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2020-05-14drm/i915: Store CS timestamp frequency in HzVille Syrjälä1-2/+2
kHz isn't accurate enough for storing the CS timestamp frequency on some of the platforms. Store the value in Hz instead. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
2020-05-14drm/i915/selftests: Always call the provided engine->emit_init_breadcrumbChris Wilson2-4/+2
While this does not appear to fix any issues, the backend itself knows when it wants to emit a breadcrumb, so let it make the final call. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-16-chris@chris-wilson.co.uk
2020-05-14Merge tag 'drm-intel-next-2020-04-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie7-24/+621
Driver Changes: - Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on Iris Plus 655 and 4K screen (Chris) - Add Wa_14011059788 for Tigerlake (Matt A) - Add per ctx batchbuffer wa for timestamp for Gen12 (Mika) - Use indirect ctx bb to load cmd buffer control value from context image to avoid corruption (Mika) - Enable DP Display Audio WA (Uma, Jani) - Update forcewake firmware ranges for Icelake (Radhakrishna) - Add missing deinitialization cases of load failure for display (Jose) - Implement TC cold sequences for Icelake and Tigerlake (Jose) - Unbreak enable_dpcd_backlight modparam (Lyude) - Move the late flush_submission in retire to the end (Chris) - Demote "Reducing compressed framebufer size" message to info (Peter) - Push MST link retraining to the hotplug work (Ville) - Hold obj->vma.lock over for_each_ggtt_vma() (Chris) - Fix timeout handling during TypeC AUX power well enabling for ICL (Imre) - Fix skl+ non-scaled pfit modes (Ville) - Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris) - Sanitize GT first before poisoning HWSP (Chris) - Fix up clock RPS frequency readout (Chris) - Avoid reusing the same logical CCID (Chris) - Avoid dereferencing a dead context (Chris) - Always enable busy-stats for execlists (Chris) - Apply the aggressive downclocking to parking (Chris) - Restore aggressive post-boost downclocking (Chris) - Scrub execlists state on resume (Chris) - Add debugfs attributes for LPSP (Ansuman) - Improvements to kernel selftests (Chris, Mika) - Add tiled blits selftest (Zbigniew) - Fix error handling in __live_lrc_indirect_ctx_bb() (Dan) - Add pre/post plane updates for SAGV (Stanislav) - Add ICL PG3 PW ID for EHL (Anshuman) - Fix Sphinx build duplicate label warning (Jani) - Error log non-zero audio power refcount after unbind (Jani) - Remove object_is_locked assertion from unpin_from_display_plane (Chris) - Use single set of AUX powerwell ops for gen11+ (Matt R) - Prefer drm_WARN_ON over WARN_ON (Pankaj) - Poison residual state [HWSP] across resume (Chris, Tvrtko) - Convert request-before-CS assertion to debug (Chris) - Carefully order virtual_submission_tasklet (Chris) - Check carefully for an idle engine in wait-for-idle (Chris) - Only close vma we open (Chris) - Trace RPS events (Chris) - Use the RPM config register to determine clk frequencies (Chris) - Drop rq->ring->vma peeking from error capture (Chris) - Check preempt-timeout target before submit_ports (Chris) - Check HWSP cacheline is valid before acquiring (Chris) - Use proper fault mask in interrupt postinstall too (Matt R) - Keep a no-frills swappable copy of the default context state (Chris) - Add atomic helpers for bandwidth (Stanislav) - Refactor setting dma info to a common helper from device info (Michael) - Refactor DDI transcoder code for clairty (Ville) - Extend PG3 power well ID to ICL (Anshuman) - Refactor PFIT code for readability and future extensibility (Ville) - Clarify code split between intel_ddi.c and intel_dp.c (Ville) - Move out code to return the digital_port of the aux ch (Jose) - Move rps.enabled/active and use of RPS interrupts to flags (Chris) - Remove superfluous inlines and dead code (Jani) - Re-disable -Wframe-address from top-level Makefile (Nick) - Static checker and spelling fixes (Colin, Nathan) - Split long lines (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200430124904.GA100924@jlahtine-desk.ger.corp.intel.com
2020-05-11drm/i915/selftests: Always flush before unpining after writingChris Wilson1-2/+7
Be consistent, and even when we know we had used a WC, flush the mapped object after writing into it. The flush understands the mapping type and will only clflush if !I915_MAP_WC, but will always insert a wmb [sfence] so that we can be sure that all writes are visible. v2: Add the unconditional wmb so we are know that we always flush the writes to memory/HW at that point. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200511141304.599-1-chris@chris-wilson.co.uk
2020-05-11drm/i915: Emit await(batch) before MI_BB_STARTChris Wilson1-14/+14
Be consistent and ensure that we always emit the asynchronous waits prior to issuing instructions that use the address. This ensures that if we do emit GPU commands to do the await, they are before our use! Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200510102431.21959-1-chris@chris-wilson.co.uk
2020-05-04drm/i915/gem: Implement legacy MI_STORE_DATA_IMMChris Wilson2-0/+30
The older arches did not convert MI_STORE_DATA_IMM to using the GTT, but left them writing to a physical address. The notes suggest that the primary reason would be so that the writes were cache coherent, as the CPU cache uses physical tagging. As such we did not implement the legacy variant of MI_STORE_DATA_IMM and so left all the relocations synchronous -- but with a small function to convert from the vma address into the physical address, we can implement asynchronous relocs on these older arches, fixing up a few tests that require them. In order to be able to test the legacy paths, refactor the gpu relocations so that we can hook them up to a selftest. v2: Use an array of offsets not enum labels for the selftest v3: Refactor the common igt_hexdump() Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/757 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200504140629.28240-1-chris@chris-wilson.co.uk
2020-04-30drm/i915/gt: Always enable busy-stats for execlistsChris Wilson1-12/+4
In the near future, we will utilize the busy-stats on each engine to approximate the C0 cycles of each, and use that as an input to a manual RPS mechanism. That entails having busy-stats always enabled and so we can remove the enable/disable routines and simplify the pmu setup. As a consequence of always having the stats enabled, we can also show the current active time via sysfs/engine/xcs/active_time_ns. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-1-chris@chris-wilson.co.uk
2020-04-29drm/i915/gt: Keep a no-frills swappable copy of the default context stateChris Wilson1-0/+1
We need to keep the default context state around to instantiate new contexts (aka golden rendercontext), and we also keep it pinned while the engine is active so that we can quickly reset a hanging context. However, the default contexts are large enough to merit keeping in swappable memory as opposed to kernel memory, so we store them inside shmemfs. Currently, we use the normal GEM objects to create the default context image, but we can throw away all but the shmemfs file. This greatly simplifies the tricky power management code which wants to run underneath the normal GT locking, and we definitely do not want to use any high level objects that may appear to recurse back into the GT. Though perhaps the primary advantage of the complex GEM object is that we aggressively cache the mapping, but here we are recreating the vm_area everytime time we unpark. At the worst, we add a lightweight cache, but first find a microbenchmark that is impacted. Having started to create some utility functions to make working with shmemfs objects easier, we can start putting them to wider use, where GEM objects are overkill, such as storing persistent error state. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429172429.6054-1-chris@chris-wilson.co.uk
2020-04-28drm/i915/execlists: Track inflight CCIDChris Wilson1-1/+1
The presumption is that by using a circular counter that is twice as large as the maximum ELSP submission, we would never reuse the same CCID for two inflight contexts. However, if we continually preempt an active context such that it always remains inflight, it can be resubmitted with an arbitrary number of paired contexts. As each of its paired contexts will use a new CCID, eventually it will wrap and submit two ELSP with the same CCID. Rather than use a simple circular counter, switch over to a small bitmap of inflight ids so we can avoid reusing one that is still potentially active. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796 Fixes: 2935ed5339c4 ("drm/i915: Remove logical HW ID") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-2-chris@chris-wilson.co.uk
2020-04-24drm/i915: Only close vma we openChris Wilson1-22/+10
The history of i915_vma_close() is confusing, as is its use. As the lifetime of the i915_vma is currently bounded by the object it is attached to, we needed a means of identify when a vma was no longer in use by userspace (via the user's fd). This is further complicated by that only ppgtt vma should be closed at the user's behest, as the ggtt were always shared. Now that we attach the vma to a lut on the user's context, the open count does indicate how many unique and open context/vm are referencing this vma from the user. As such, we can and should just use the open_count to track when the vma is still in use by userspace. It's a poor man's replacement for reference counting. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1193 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422190558.30509-1-chris@chris-wilson.co.uk
2020-04-23drm/i915/selftests: Add request throughput measurement to perfChris Wilson2-1/+580
Under ideal circumstances, the driver should be able to keep the GPU fully saturated with work. Measure how close to ideal we get under the harshest of conditions with no user payload. v2: Also measure throughput using only one thread. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422074203.9799-1-chris@chris-wilson.co.uk
2020-04-22Merge tag 'drm-misc-next-2020-04-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-9/+23
drm-misc-next for 5.8: UAPI Changes: - drm: error out with EBUSY when device has existing master - drm: rework SET_MASTER and DROP_MASTER perm handling Cross-subsystem Changes: - mm: export two symbols from slub/slob - fbdev: savage: fix -Wextra build warning - video: omap2: Use scnprintf() for avoiding potential buffer overflow Core Changes: - Remove drm_pci.h - drm_pci_{alloc/free)() are now legacy - Introduce managed DRM resourcesA - Allow drivers to subclass struct drm_framebuffer - Introduce struct drm_afbc_framebuffer and helpers - fbdev: remove return value from generic fbdev setup - Introduce simple-encoder helper - vram-helpers: set fence on plane - dp_mst: ACT timeout improvements - dp_mst: Remove drm_dp_mst_has_audio() - TTM: ttm_trace_dma_{map/unmap}() cleanups - dma-buf: add flag for PCIP2P support - EDID: Various improvements - Encoder: cleanup semantics of possible_clones and possible_crtcs - VBLANK documentation updates - Writeback documentation updates Driver Changes: - Convert several drivers to i2c_new_client_device() - Drop explicit drm_mode_config_cleanup() calls from drivers - Auto-release device structures with drmm_add_final_kfree() - Init bfdev console after registering DRM device - Make various .debugfs functions return 0 unconditionally; ignore errors - video: Use scnprintf() to avoid buffer overflows - Convert drivers to simple encoders - drm/amdgpu: note that we can handle peer2peer DMA-buf - drm/amdgpu: add support for exporting VRAM using DMA-buf v3 - drm/kirin: Revert change to register connectors - drm/lima: Add optional devfreq and cooling device support - drm/lima: Various improvements wrt. task handling - drm/panel: nt39016: Support multiple modes and 50Hz - drm/panel: Support Leadtek LTK050H3146W - drm/rockchip: Add support for afbc - drm/virtio: Various cleanups - drm/hisilicon/hibmc: Enforce 128-byte stride alignment - drm/qxl: Fix notify port address of cursor ring buffer - drm/sun4i: Improvements to format handling - drm/bridge: dw-hdmi: Various improvements Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200414090738.GA16827@linux-uq9g
2020-04-17drm/i915/selftests: Move gpu energy measurement into its own little libChris Wilson2-0/+37
Move the handy utility to measure the GPU energy consumption using RAPL msr into a common lib so that it can be reused easily. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200417152018.13079-1-chris@chris-wilson.co.uk
2020-04-02drm/i915/gem: Drop cached obj->bind_countChris Wilson2-26/+1
We cached the number of vma bound to the object in order to speed up shrinker decisions. This has been superseded by being more proactive in removing objects we cannot shrink from the shrinker lists, and so we can drop the clumsy attempt at atomically counting the bind count and comparing it to the number of pinned mappings of the object. This will only get more clumsier with asynchronous binding and unbinding. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200401223924.16667-1-chris@chris-wilson.co.uk
2020-03-30drm/i915: Allow for different modes of interruptible i915_active_waitChris Wilson1-5/+5
Allow some users the discretion to not immediately return on a normal signal. Hopefully, they will opt to use TASK_KILLABLE instead. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200327112212.16046-1-chris@chris-wilson.co.uk
2020-03-26drm: Garbage collect drm_dev_finiDaniel Vetter1-2/+0
It has become empty. Given the few users I figured not much point splitting this up. v2: Rebase over i915 changes. v3: Rebase over patch split fix. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-26-daniel.vetter@ffwll.ch
2020-03-26drm/i915: Use drmm_add_final_kfreeDaniel Vetter1-7/+23
With this we can drop the final kfree from the release function. The mock device in the selftests needed it's pci_device split up from the drm_device. In the future we could simplify this again by allocating the pci_device as a managed allocation too. v2: I overlooked that i915_driver_destroy is also called in the unwind code of the error path. There we need a drm_dev_put. Similar for the mock object. Now the problem with that is that the drm_driver->release callbacks for both the real driver and the mock one assume everything has been set up. Hence going through that path for a partially set up driver will result in issues. Quickest fix is to disable the ->release() hook until the driver is fully initialized, and keep the onion unwinding. Long term would be cleanest to move everything over to drmm_ release actions, but that's a lot of work for a big driver like i915. Plus more core work needed first anyway. v3: Fix i915_drm pointer wrangling in mock_gem_device. Also switch over to start using drm_dev_put() to clean up even on the error path. Aside I think the current error path is leaking the allocation. v4: more fixes for intel-gfx-ci, some if it damage from v3 :-/ Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-9-daniel.vetter@ffwll.ch
2020-03-26drm/i915: Drop final few uses of drm_i915_private.engineChris Wilson2-7/+13
We've migrated all the heavy users over to the intel_gt, and can finally drop the last few users and with that the mirror in dev_priv->engine[]. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200325234803.6175-1-chris@chris-wilson.co.uk
2020-03-23drm/i915/selftests/perf: watch out for stolen objectsMatthew Auld1-1/+4
Stolen memory is allocated at creation, returning -ENOSPC if we run out space. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1424 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200323110301.38806-1-matthew.auld@intel.com
2020-03-19drm/i915: Prefer '%ps' for printing function symbol namesChris Wilson2-2/+2
%pS includes the offset, which is useful for return addresses but noise when we are pretty printing a known (and expected) function entry point. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319091943.7815-1-chris@chris-wilson.co.uk
2020-03-17drm/i915/perf: remove generated codeLionel Landwerlin1-3/+95
A little bit of history : Back when i915-perf was introduced (4.13), there was no way to dynamically add new OA configurations to i915. Only the generated configs baked in at build time were allowed. It quickly became obvious that we would need to allow applications to upload their own configurations, for instance to be able to test new ones, and so by the next stable version (4.14) we added uAPIs to allow uploading new configurations. When adding that capability, we took the opportunity to remove most HW configurations except the TestOa one which is a configuration IGT would rely on to verify that the HW is outputting correct values. At the time it made sense to have that confiuration in at the same time a given HW platform added to the i915-perf driver. Now that IGT has become the reference point for HW configurations (see commit 53f8f541ca ("lib: Add i915_perf library"), previously this was located in the GPUTop repository), the need for having those configurations in i915-perf is gone. On the Mesa side, we haven't relied on this test configuration for a while. The MDAPI library always required 4.14 feature level and always loaded its configuration into i915. I'm sure nobody will miss this generated stuff in i915 :) v2: Fix selftests by creating an empty config v3: Fix unlocking on allocation error (Dan Carpenter) v4: Fixup checkpatch warnings v5: Fix incorrect unlock in error path (Umesh) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200317132222.2638719-1-lionel.g.landwerlin@intel.com
2020-03-16drm/i915/gt: Pull restoration of GGTT fences underneath the GTChris Wilson1-2/+0
Make the GT responsible for restoring its fence when it wakes up from suspend. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-2-chris@chris-wilson.co.uk
2020-03-16drm/i915: Move GGTT fence registers under gt/Chris Wilson1-1/+1
Since the fence registers control HW detiling through the GGTT aperture, make them a part of the intel_ggtt under gt/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-1-chris@chris-wilson.co.uk
2020-03-07drm/i915/selftests: Apply a heavy handed flush to i915_activeChris Wilson1-8/+21
Due to the ordering of cmpxchg()/dma_fence_signal() inside node_retire(), we must also use the xchg() as our primary memory barrier to flush the outstanding callbacks after expected completion of the i915_active. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306133852.3420322-1-chris@chris-wilson.co.uk
2020-03-06drm/i915/selftests: try to rein in alloc_smokeMatthew Auld1-5/+20
Depending on RNG we might try to fill an 8G region for every possible order, using the smallest possible chunk size of 4K, which seems to be very slow. Try to remedy the situation by adding an overall timeout for the test, while also selecting each order level in a random fashion. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1310 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200305204711.217783-2-matthew.auld@intel.com
2020-03-06drm/i915: Add mechanism to submit a context WA on ring submissionMika Kuoppala1-0/+1
This patch adds framework to submit an arbitrary batchbuffer on each context switch to clear residual state for render engine on Gen7/7.5 devices. The idea of always emitting the context and vm setup around each request is primary to make reset recovery easy, and not require rewriting the ringbuffer. As each request would set up its own context, leaving it to the HW to notice and elide no-op context switches, we could restart the ring at any point, and reorder the requests freely. However, to avoid emitting clear_residuals() between consecutive requests in the ringbuffer of the same context, we do want to track the current context in the ring. In doing so, we need to be careful to only record a context switch when we are sure the next request will be emitted. This security mitigation change does not trigger any performance regression. Performance is on par with current mainline/drm-tip. v2: Update vm_alias params to point to correct address space "vm" due to changes made in the patch "f21613797bae98773" v3-v4: none Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Balestrieri Francesco <francesco.balestrieri@intel.com> Cc: Bloomfield Jon <jon.bloomfield@intel.com> Cc: Dutt Sudeep <sudeep.dutt@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200306000957.2836150-1-chris@chris-wilson.co.uk
2020-03-04drm/i915: Apply i915_request_skip() on submissionChris Wilson1-1/+1
Trying to use i915_request_skip() prior to i915_request_add() causes us to try and fill the ring upto request->postfix, which has not yet been set, and so may cause us to memset() past the end of the ring. Instead of skipping the request immediately, just flag the error on the request (only accepting the first fatal error we see) and then clear the request upon submission. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200304121849.2448028-1-chris@chris-wilson.co.uk
2020-02-28drm/i915/selftests: Disable heartbeat around manual pulse testsChris Wilson1-2/+1
Still chasing the mystery of the stray idle flush, let's ensure that the heartbeat does not run at the same time as our test and confuse us. References: https://gitlab.freedesktop.org/drm/intel/issues/541 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-8-chris@chris-wilson.co.uk
2020-02-26drm/i915: stop assigning drm->dev_private pointerJani Nikula1-1/+0
We no longer need or use it as we subclass struct drm_device in our struct drm_i915_private, and can always use to_i915() to get at i915. Stop assigning the pointer to catch anyone trying to add new users for ->dev_private. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Dale B Stimson <dale.b.stimson@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200224113312.13674-1-jani.nikula@intel.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.