aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-18Merge tag 'drm-intel-fixes-2014-02-14' of ssh://git.freedesktop.org/git/drm-intel into drm-fixesDave Airlie4-6/+49
3 fixes plus 1 prep patch, all four cc: stable. Jani will take over from here and the plan is that he'll do 3.14-fixes for the entire release just to work things out a bit. * tag 'drm-intel-fixes-2014-02-14' of ssh://git.freedesktop.org/git/drm-intel: drm/i915/dp: add native aux defer retry limit drm/i915/dp: increase native aux defer retry timeout drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVB drm/i915: Add intel_ring_cachline_align()
2014-02-13drm/i915/dp: add native aux defer retry limitJani Nikula1-4/+11
Retrying indefinitely places too much trust on the aux implementation of the sink devices. Reported-by: Daniel Martin <consume.noise@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71267 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Tested-by: Theodore Ts'o <tytso@mit.edu> Tested-by: Sree Harsha Totakura <freedesktop@h.totakura.in> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-13drm/i915/dp: increase native aux defer retry timeoutJani Nikula1-2/+2
Give more slack to sink devices before retrying on native aux defer. AFAICT the 100 us timeout was not based on the DP spec. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org (on Jani's request) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12Merge tag 'drm-intel-fixes-2014-02-11' of ssh://git.freedesktop.org/git/drm-intel into drm-nextDave Airlie5-11/+14
3 regression fixes in i915 * tag 'drm-intel-fixes-2014-02-11' of ssh://git.freedesktop.org/git/drm-intel: drm/i915: Pair va_copy with va_end in i915_error_vprintf drm/i915: Fix intel_pipe_to_cpu_transcoder for UMS drm/i915: Disable dp aux irq on g4x
2014-02-11drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVBVille Syrjälä1-0/+14
According to BSpec the entire MI_DISPLAY_FLIP packet must be contained in a single cacheline. Make sure that happens. v2: Use intel_ring_begin_cacheline_safe() v3: Use intel_ring_cacheline_align() (Chris) Cc: Bjoern C <lkml@call-home.ch> Cc: Alexandru DAMIAN <alexandru.damian@intel.com> Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74053 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11drm/i915: Add intel_ring_cachline_align()Ville Syrjälä2-0/+22
intel_ring_cachline_align() emits MI_NOOPs until the ring tail is aligned to a cacheline boundary. Cc: Bjoern C <lkml@call-home.ch> Cc: Alexandru DAMIAN <alexandru.damian@intel.com> Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org (prereq for the next patch) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11drm/i915: Pair va_copy with va_end in i915_error_vprintfMika Kuoppala1-1/+4
Each invocation of va_copy() must be matched by a corresponding invocation of va_end() in the same function. This regression has been introduced in commit e29bb4ebbf000ff9ac081d29784a3331618f012e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Sep 20 10:20:59 2013 +0100 drm/i915: Use a temporary va_list for two-pass string handling Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11drm/i915: Fix intel_pipe_to_cpu_transcoder for UMSDaniel Vetter1-2/+1
We don't have all the drm_crtc&co hanging around in that case. This regression has been introduced in commit 391f75e2bf13f105d9e4a120736ccdd8e3bc638b Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Sep 25 19:55:26 2013 +0300 drm/i915: Fix pre-CTG vblank counter Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69521 Cc: stable@vger.kernel.org (for 3.13 only) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11Merge tag 'drm-intel-fixes-2014-02-06' of ssh://git.freedesktop.org/git/drm-intel into drm-nextDave Airlie2-7/+12
Just minor stuff really, on vlv dp fix and two patches to tune down some opregion sanity check. Plus MAINTAINERS update for the new git repo, which is the only reason I've really bothered with this pull request. * tag 'drm-intel-fixes-2014-02-06' of ssh://git.freedesktop.org/git/drm-intel: drm/i915: demote opregion excessive timeout WARN_ONCE to DRM_INFO_ONCE drm: add DRM_INFO_ONCE() to print a one-time DRM_INFO() message MAINTAINERS: Update drm/i915 git repo drm/i915: vlv: fix DP PHY lockup due to invalid PP sequencer setup
2014-02-07drm/i915: Disable dp aux irq on g4xDaniel Vetter3-8/+9
Apparently it's broken in the exact same way as the gmbus irq. For reference of the full story see commit c12aba5aa0e60b7947bc8b6ea25ef55c4acf81a4 Author: Jiri Kosina <jkosina@suse.cz> Date: Tue Mar 19 09:56:57 2013 +0100 drm/i915: stop using GMBUS IRQs on Gen4 chips The effect is that we have a storm of unclaimed interrupts on the legacy irq line. If that one is used by a different device then the kernel will complain and rather quickly kill the irq source. Which breaks any device trying to actually use the legacy irq line. This regression has been introduced commit 4aeebd7443e36b0a40032e518a9338f48bd27efc Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 31 09:53:36 2013 +0100 drm/i915: dp aux irq support for g4x/vlv Note that disabling MSI works around the issue, but we can't do that since apparently then the hw will miss interrupts. At least if relevant comments in i915_irq.c are accurate. v2: Cross-reference dp aux and gmbus gen4 comments. v3: Consolidate harder into i915_drv.h as suggested by Chris. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04drm/i915: demote opregion excessive timeout WARN_ONCE to DRM_INFO_ONCEJani Nikula1-3/+6
The WARN_ONCE is a bit too verbose, make it a DRM_INFO_ONCE. While at it, add a #define for MAX_DSLP and make the message a bit more informative. v2: use DRM_INFO_ONCE, add MAX_DSLP, pimp the message. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-30drm/i915: vlv: fix DP PHY lockup due to invalid PP sequencer setupImre Deak1-4/+6
Atm we setup the HW panel power sequencer logic both for eDP and DP ports. On eDP we then go on and start the power on sequence and commence with link training when it's ready. On DP we don't do the power on sequencing but do the link training immediately. At this point the DP PHY block gets stuck, since - supposedly - it is waiting for the power on sequence to finish. The actual register write that seems to hold off the PHY is PIPEX_PP_ON_DELAYS[Panel Control Port Select]. Writing here a non-0 value eventually sets PIPEX_PP_STATUS[Require Asset Status] to 1 and blocks the PHY until the panel power on is ready. Fix this by not doing any PP sequencing setup for DP ports. Thanks to Ville Syrjälä, Jesse Barnes and Todd Previte for the help in tracking this down. Note that on older gmch platforms (where we have lvds instead of edp) we've hacked around this by writing the magic ABCD unlock key to PP registers, which disables the hw sanity checks. For edp all platforms thus far had the pch split, with the edp port in the north display complex and the PP registers on the pch the hw sanity checks (expressed through the "Require Asset Status" bit) was never functional, hence never a real issue. This regression has been introduce in commit bf13e81b904a37d94d83dd6c3b53a147719a3ead Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Sep 6 07:40:05 2013 +0300 drm/i915: add support for per-pipe power sequencing on vlv Signed-off-by: Imre Deak <imre.deak@intel.com> [danvet: Add note about the bigger story here.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-29Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds44-2858/+3763
Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...
2014-01-29Merge tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux into drm-nextDave Airlie1-24/+2
drm/tegra: Changes for v3.14-rc1 (update) These patches fix some issues caused by the DRM panel support from the previous pull request and add two more panels (for the Toshiba AC100 as well as the Seaboard and Ventana). * tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Obtain head number from DT drm/panel: update EDID BLOB in panel_simple_get_modes() gpu: host1x: Remove unnecessary include drm/tegra: Use proper data type drm/tegra: Clarify how panel modes override others drm/tegra: Fix possible CRTC mask for RGB outputs drm/i915: Use drm_encoder_crtc_ok() drm: Move drm_encoder_crtc_ok() to core drm: provide a helper for the encoder possible_crtcs mask drm/tegra: Don't check resource with devm_ioremap_resource() drm/panel: Add support for Chunghwa CLAA101WA01A panel drm/panel: Add support for Samsung LTN101NT05 panel
2014-01-28drm/i915: Fix the offset issue for the stolen GEM objectsAkash Goel1-1/+1
The 'offset' field of the 'scatterlist' structure was wrongly programmed with the offset value from the base of stolen area, whereas this field indicates the offset from where the interested data starts within the first PAGE pointed to by 'scattterlist' structure. As a result when a new GEM object allocated from stolen area is mapped to GTT, it could lead to an overwrite of GTT entries as the page count calculation will go wrong, refer the function 'sg_page_count'. v2: Modified the commit message. (Chris) Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71908 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69104 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27drm/i915: Decouple GPU error reporting from ring initialisationChris Wilson2-7/+16
Currently we report through our error state only the rings that have been initialised (as detected by ring->obj). This check is done after the GPU reset and ring re-initialisation, which means that the software state may not be the same as when we captured the hardware error and we may not print out any of the vital information for debugging the hang. This (and the implied object leak) is a regression from commit 3d57e5bd1284f44e325f3a52d966259ed42f9e05 Author: Ben Widawsky <ben@bwidawsk.net> Date: Mon Oct 14 10:01:36 2013 -0700 drm/i915: Do a fuller init after reset Note that we are already starting to get bug reports with incomplete error states from 3.13, which also hampers debugging userspace driver issues. v2: Prevent a NULL dereference on 830gm/845g after a GPU reset where the scratch obj may be NULL. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=74094 Cc: stable@vger.kernel.org # please don't delay since it's a vital support/debug feature for the intel gfx stack in general Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Add a bit of fluff to make it clear we need this expedited in stable.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-25i915: remove pm_qos request on errorStanislaw Gruszka1-0/+1
Not removing pm qos request and free memory for it can cause crash, when some other driver use pm qos. For example, this oops: BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff81307a6b>] plist_add+0x5b/0xd0 Call Trace: [<ffffffff810acf25>] pm_qos_update_target+0x125/0x1e0 [<ffffffff810ad071>] pm_qos_add_request+0x91/0x100 [<ffffffffa053ec14>] e1000_open+0xe4/0x5b0 [e1000e] was caused by earlier i915 probe failure: [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000 [drm:i915_driver_load] *ERROR* failed to init modeset i915: probe of 0000:00:02.0 failed with error -5 Bug report: http://bugzilla.redhat.com/show_bug.cgi?id=1057533 Reported-by: Giandomenico De Tullio <ghisha@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [danvet: Drop unnecessary code movement.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds4-120/+33
Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-24Revert "drm/i915: Mask reserved bits in display/sprite address registers"Daniel Vetter3-15/+13
This reverts commit 446f254566ea8911c9e19c7bc8a162fc0e53cf31. I've left the masking in the pageflip code since that seems to be some useful piece of preemptive robustness. Iirc I've merged this patch under the assumption that the BIOS leaves some random gunk in the lower bits and gets unhappy if we trample on them. We have quite a few case like this, so this made sense. Now I've just learned that there's actual hardware features bits in the low 12 bits, and the kernel needs to preserve them to allow a userspace blob to do its job. Given Dave Airlie's clear stance on userspace blob drivers I've quickly chatted with him and he doesn't seem too happy. So let's revert this. If there are indeed bits that we must preserve in this range then we can ressurrect this patch, but with proper documentation for those bits supplied. And we probably also need to think a bit about interactions with our driver. Cc: Armin Reese <armin.c.reese@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-23drm/i915: VLV2 - Fix hotplug detect bitsTodd Previte2-15/+35
Add new definitions for hotplug live status bits for VLV2 since they're in reverse order from the gen4x ones. Changelog: - Restored gen4 bit definitions - Added new definitions for VLV2 - Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct bit defintions - Replaced a lost trailing brace for the added switch() Signed-off-by: Todd Previte <tprevite@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951 [danvet: Switch to _VLV postfix instead of prefix and regroupg comments again so that the g4x warning is right next to those defines. Also add a _G4X suffix for those special ones. Also cc stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-3/+3
Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ...
2014-01-22drm/i915: Allow reading the TIMESTAMP register on Gen8.Kenneth Graunke1-1/+1
Nothing's changed here; we just need to bump the generation check. Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: Repeat evictions whilst pageflip completions are outstandingChris Wilson1-7/+20
Since an old pageflip will keep its scanout buffer object pinned until it has executed its unpin task on the common workqueue, we can clog up our GGTT with stale pinned objects. As we cannot flush those workqueues without dropping our locks, we have to resort to falling back to userspace and telling them to repeat the operation in order to have a chance to run our workqueues and free up the required memory. If we fail, then we are forced to report ENOSPC back to userspace causing the operation to fail and best-case scenario is that it introduces temporary corruption. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: Wait for completion of pending flips when starved of fencesChris Wilson3-4/+34
On older generations (gen2, gen3) the GPU requires fences for many operations, such as blits. The display hardware also requires fences for scanouts and this leads to a situation where an arbitrary number of fences may be pinned by old scanouts following a pageflip but before we have executed the unpin workqueue. This is unpredictable by userspace and leads to random EDEADLK when submitting an otherwise benign execbuffer. However, we can detect when we have an outstanding flip and so cause userspace to wait upon their completion before finally declaring that the system is starved of fences. This is really no worse than forcing the GPU to stall waiting for older execbuffer to retire and release their fences before we can reallocate them for the next execbuffer. v2: move the test for a pending fb unpin to a common routine for later reuse during eviction Reported-and-tested-by: dimon@gmx.net Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73696 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: don't disable DP port after a failed link trainingImre Deak1-1/+0
Atm after a failed link training we disable the DP port. This can happen during a modeset-enable or a DP link re-establishment. The latter can be a problem and we shouldn't disable the DP port, see the previous patch for the reasoning. In the former case the right thing would be to disable the DP port, but also the rest of the pipe. As a stop-gap solution leave the DP port enabled in both cases. It is an improvement on its own (avoiding HW lock ups) and the proper solution for the first case requires a bigger change, so let's keep that on the TODO list. v2: - fix explanation of change impact (Chris) Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: don't disable the DP port if the link is lostImre Deak1-2/+0
Currently if the DP link is lost (either because of a hot unplug, or failed link status check) we disable the DP port, but leave the rest of the pipe running. This is incompatible with the modeset disabling sequence of some platforms/configurations. At least this is the case for DP ports on the CPU as opposed to PCH. Atm we'll also get a warning when we do a modeset disable after the above link lost event, since we expect the DP port to be enabled at this point (see the bugzilla ticket for the related dmesg). Note that with this patch we'll still end up disabling the port, thanks to the HPD uevent and subsequent modeset disable. See also the next patch fixing the other half of this issue. Solution suggested by Ville. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70570 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: Eliminate lots of WARNs when there's no backlight presentVille Syrjälä2-11/+5
My 855gm doesn't register the intel backlight but it still ends up calling the backlight code to enable/disable the backlight via the LVDS code. This leads to some WARNs due to backlight.max being 0. Let's have intel_panel_enable_backlight() and intel_panel_disable_backlight() check whether there's a backlight present or not. Also move the backlight.present check from asle_set_backlight() into intel_panel_set_backlight() for some extra symmetry. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: g4x/vlv: fix dp aux interrupt maskImre Deak1-1/+2
Fix typo possibly leading to timed out DP aux transactions on ports C,D. Introduced in: Commmit 4aeebd7443e36b0a40032e518a9338f48bd27efc Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 31 09:53:36 2013 +0100 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72210 Signed off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915/ppgtt: Defer request freeing on resetBen Widawsky1-10/+17
We need to defer the free request until the object/vma is capable of being freed - or else we have a problem when we try to destroy the context. The exact same issue is described and fixed here: commit e20780439b26ba95aeb29d3e27cd8cc32bc82a4c Author: Ben Widawsky <ben@bwidawsk.net> Date: Fri Dec 6 14:11:22 2013 -0800 drm/i915: Defer request freeing I had this fix previously, but decided not to keep it for some reason I can no longer remember. gem_reset_stats is a really good test at hitting the problem. For the inquisitive: [ 170.516392] ------------[ cut here ]------------ [ 170.517227] WARNING: CPU: 1 PID: 105 at drivers/gpu/drm/drm_mm.c:578 drm_mm_takedown+0x2e/0x30 [drm]() [ 170.518064] Memory manager not clean during takedown. [ 170.518941] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 3.13.0-rc4-BEN+ #28 [ 170.519787] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012 [ 170.520662] Call Trace: [ 170.521517] [<ffffffff814f0589>] dump_stack+0x4e/0x7a [ 170.522373] [<ffffffff81049e6d>] warn_slowpath_common+0x7d/0xa0 [ 170.523227] [<ffffffff81049edc>] warn_slowpath_fmt+0x4c/0x50 [ 170.524079] [<ffffffffa06c414e>] drm_mm_takedown+0x2e/0x30 [drm] [ 170.524934] [<ffffffffa07213f3>] gen6_ppgtt_cleanup+0x23/0x110 [i915] [ 170.525777] [<ffffffffa07837ed>] ppgtt_release.part.5+0x24/0x29 [i915] [ 170.526603] [<ffffffffa071aaa5>] i915_gem_context_free+0x195/0x1a0 [i915] [ 170.527423] [<ffffffffa071189d>] i915_gem_free_request+0x9d/0xb0 [i915] [ 170.528247] [<ffffffffa0718af9>] i915_gem_reset+0x1f9/0x3f0 [i915] [ 170.529065] [<ffffffffa0700cce>] i915_reset+0x4e/0x180 [i915] [ 170.529870] [<ffffffffa070829d>] i915_error_work_func+0xcd/0x120 [i915] [ 170.530666] [<ffffffff8106c13a>] process_one_work+0x1fa/0x6d0 [ 170.531453] [<ffffffff8106c0d8>] ? process_one_work+0x198/0x6d0 [ 170.532230] [<ffffffff8106c72b>] worker_thread+0x11b/0x3a0 [ 170.532996] [<ffffffff8106c610>] ? process_one_work+0x6d0/0x6d0 [ 170.533771] [<ffffffff810743ef>] kthread+0xff/0x120 [ 170.534548] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.535322] [<ffffffff814f97ac>] ret_from_fork+0x7c/0xb0 [ 170.536089] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.536847] ---[ end trace 3d4c12892e42d58f ]--- v2: Whitespace fix. (Chris) Note: This is a bug that only hits the ppgtt topic branch but I've figured that doing the request cleanup in this order is generally the right thing to do. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a code comment to clarify what's actually going on since the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also add a note about why we need this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22i915: send D1 opregion notificationKristen Carlson Accardi1-1/+9
The opregion notification for runtime suspend is currently D1, not D3. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915/bdw: remove preliminary_hw_support flag from BDWJesse Barnes1-2/+0
It ought to work ok in 3.14. We have some fun stuff coming after that, but all the basics are in place now and seem relatively stable. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: Tune down reset_stat output from ERROR to debugDaniel Vetter1-1/+1
This is user-triggerable and hence we should not allow it to spam dmesg. Also, it upsets the nice dmesg tracking piglit does. Note that this is just extra debugging information, mostly unwanted, in case of a hang and that there is a separate message to the user giving instructions on how to report a bug for a GPU hang. v2: Add note as suggests in Chris' reply. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72740 Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: Make semaphore modparam ROBen Widawsky1-1/+1
A couple patches in the upcoming rework of semaphores will break if semaphores are toggled by the user at various times. Since the code cleanups there seem to be an overall win, and toggling semaphores at runtime is not a terribly useful thing to do, simply make the module parameter read-only. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: Fix disabled semaphoresBen Widawsky1-4/+6
The ring will emit too many if semaphores are disabled since we do not add the correct number to num_dwords anymore. This was introduced: commit 52ed23253b68e1cf154b03d91bed619504cf955b Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Dec 16 20:50:38 2013 -0800 drm/i915: Don't emit mbox updates without semaphores FWIW, the bug was fixed later in the series. /me hangs head in shame. Daniel: Also note that we should have merged the read-only semaphore modparam before this patch. Reported-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-22drm/i915: Clarify relocation errnosBen Widawsky1-7/+7
While trying to find a random -EINVAL from a failing test, I noticed we had a few hard to follow return values. The first two hunks in this patch replace completely useless initialization of ret. The last several hunks help to distinguish between altering 'return ret' and 'return <ERROR>' Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-20drm/i915: Add a kludge for DSL incrementing too late and ISR not workingVille Syrjälä1-40/+39
On pre-PCH platforms ISR doesn't seem to be an actual ISR, at least as far as display interrupts are concerned. Instead it sort of looks like some ISR bits just directly reflect the corresponding bit from PIPESTAT. The bit appears in the ISR only if the PIPESTAT interrupt is enabled. So in that sense it sort of looks a bit like the south interrupt scheme on PCH platforms. So it goes something a bit like this: PIPESTAT.status & PIPESTAT.enable -> ISR -> IMR -> IIR -> IER -> actual interrupt In any case that means the intel_pipe_in_vblank_locked() doesn't actually work for pre-PCH platforms. As a last resort, add a similar kludge as radeon has that fixes things up if we got called from the vblank interrupt, but the scanline counter value indicates that we're not quite there yet. We know that the scanline counter increments at hsync but is otherwise accurate, so we can limit the kludge to the line just prior to vblank start, instead of the relative distance that radeon uses. Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20drm: Pass 'flags' from the caller to .get_scanout_position()Ville Syrjälä1-1/+2
Preparation for moving the early vblank IRQ logic into radeon_get_crtc_scanoutpos(). v2: Fix radeon_drv.c compile warning (Mario) Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20drm/i915: Fix scanoutpos calculations for interlaced modesVille Syrjälä1-0/+6
The scanline counter counts lines in the current field, not the entire frame. But the crtc_ timings are the values for the entire frame. Divide the vertical timings by 2 to make them match the scanline counter. The rounding was carefully chosen to make it do the right thing wrt. the observed scanline counter and ISR vblank bit behaviour. Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20drm/i915: Call drm_calc_timestamping_constants() earlierVille Syrjälä1-9/+8
Update the pixel/line/frame duration information when we switch to the new pipe config. This will keep the timestamping constants in better sync with the real hardware state. Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20drm/i915: Kill hwmode save/restoreVille Syrjälä1-10/+3
drm core no longer uses crtc->hwmode, and neither does i915, so we can totally ignore it in i915. Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20drm: Pass the display mode to drm_calc_vbltimestamp_from_scanoutpos()Ville Syrjälä1-1/+2
Rather than using crtc->hwmode, just pass the relevant mode to drm_calc_vbltimestamp_from_scanoutpos(). This removes the last hwmode usage from core drm. Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20drm: Pass the display mode to drm_calc_timestamping_constants()Ville Syrjälä1-1/+2
We don't really use hwmode anymore in i915, so eliminating its use from the core code seems prudent. Just pass the appropriate mode to drm_calc_timestamping_constants(). Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20Merge branch 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-nextDave Airlie24-1036/+700
drm-intel-next-2014-01-10: - final bits for runtime D3 on Haswell from Paul (now enabled fully) - parse the backlight modulation freq information in the VBT from Jani (but not yet used) - more watermark improvements from Ville for ilk-ivb and bdw - bugfixes for fastboot from Jesse - watermark fix for i830M (but not yet everything) - vlv vga hotplug w/a (Imre) - piles of other small improvements, cleanups and fixes all over Note that the pull request includes a backmerge of the last drm-fixes pulled into Linus' tree - things where getting a bit too messy. So the shortlog also contains a bunch of patches from Linus tree. Please yell if you want me to frob it for you a bit. * 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits) drm/i915/bdw: make sure south port interrupts are enabled properly v2 drm/i915: Include more information in disabled hotplug interrupt warning drm/i915: Only complain about a rogue hotplug IRQ after disabling drm/i915: Only WARN about a stuck hotplug irq ONCE drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
2014-01-16Merge commit origin/master into drm-intel-nextDaniel Vetter15-126/+200
Conflicts are getting out of hand, and now we have to shuffle even more in -next which was also shuffled in -fixes (the call for drm_mode_config_reset needs to move yet again). So do a proper backmerge. I wanted to wait with this for the 3.13 relaese, but alas let's just do this now. Conflicts: drivers/gpu/drm/i915/i915_reg.h drivers/gpu/drm/i915/intel_ddi.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_pm.c Besides the conflict around the forcewake get/put (where we chaged the called function in -fixes and added a new parameter in -next) code all the current conflicts are of the adjacent lines changed type. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-14drm/i915: Use drm_encoder_crtc_ok()Thierry Reding1-24/+2
The intel_encoder_crtc_ok() is a duplicate of the drm_encoder_crtc_ok() function that used to be only available in the DRM CRTC helpers. It has recently been moved to the core, so the duplicate can now be dropped. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-12Merge branch 'acpi-dsm'Rafael J. Wysocki1-114/+30
* acpi-dsm: ACPI / extlog: replace open-coded _DSM code with helper functions ACPI / nouveau: replace open-coded _DSM code with helper functions nouveau / ACPI: fix memory leak in ACPI _DSM related code ACPI / i915: replace open-coded _DSM code with helper functions ACPI / i2c-hid: replace open-coded _DSM code with helper functions ACPI / TPM: detect PPI features by checking availability of _DSM functions ACPI / TPM: replace open-coded _DSM code with helper functions ACPI / TPM: match node name instead of full path when searching for TPM device PCI / pci-label: treat PCI label with index 0 as valid label ACPI / PCI: replace open-coded _DSM code with helper functions PCI / pci-label: release allocated ACPI object on error recovery path ACPI: introduce helper interfaces for _DSM method
2014-01-12Merge branch 'acpi-cleanup'Rafael J. Wysocki4-6/+3
* acpi-cleanup: (22 commits) ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment. ACPI / tables: Check if id is NULL in acpi_table_parse() ACPI / proc: Include appropriate header file in proc.c ACPI / EC: Remove unused functions and add prototype declaration in internal.h ACPI / dock: Include appropriate header file in dock.c ACPI / PCI: Include appropriate header file in pci_link.c ACPI / PCI: Include appropriate header file in pci_slot.c ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c ACPI / NVS: Include appropriate header file in nvs.c ACPI / OSL: Mark the function acpi_table_checksum() as static ACPI / processor: initialize a variable to silence compiler warning ACPI / processor: use ACPI_COMPANION() to get ACPI device ACPI: correct minor typos ACPI / sleep: Drop redundant acpi_disabled check ACPI / dock: Drop redundant acpi_disabled check ACPI / table: Replace '1' with specific error return values ACPI: remove trailing whitespace ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h> SFI / ACPI: Fix warnings reported during builds with W=1 ... Conflicts: drivers/acpi/nvs.c drivers/hwmon/asus_atk0110.c
2014-01-10drm/i915/bdw: make sure south port interrupts are enabled properly v2Jesse Barnes1-0/+2
We were apparently relying on the defaults on BDW, which resulted in no hotplug or AUX interrupts. So be sure to call the ibx_irq_preinstall to enable all interrupts. v2: use preinstall instead of redundant SDIER write References: https://bugs.freedesktop.org/show_bug.cgi?id=72834 References: https://bugs.freedesktop.org/show_bug.cgi?id=72833 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-10drm/i915: Include more information in disabled hotplug interrupt warningChris Wilson1-1/+2
Daniel thought that this was an opportune moment to include which pins and bits ended up being stuck in the WARN. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-10drm/i915: Only complain about a rogue hotplug IRQ after disablingChris Wilson1-1/+1
Disabling the hotplug IRQ is a two-step process. First, inside the IRQ handler we mark the rogue hotplug pin for disabling. Then later in the hotplug worker, we actually disable the hotplug pin. So we should not WARN about the rogue hotplug IRQ being sent until after we have completed disabling the pin. References: https://bugzilla.redhat.com/show_bug.cgi?id=1051170 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.