aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/imx (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-11-05Revert "drm/imx: Annotate dma-fence critical section in commit path"Fabio Estevam1-2/+0
This reverts commit f4b34faa08428d813fc3629f882c503487f94a12. Since commit f4b34faa0842 ("drm/imx: Annotate dma-fence critical section in commit path") the following possible circular dependency is detected: [ 5.001811] ====================================================== [ 5.001817] WARNING: possible circular locking dependency detected [ 5.001824] 5.14.9-01225-g45da36cc6fcc-dirty #1 Tainted: G W [ 5.001833] ------------------------------------------------------ [ 5.001838] kworker/u8:0/7 is trying to acquire lock: [ 5.001848] c1752080 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x40/0x294 [ 5.001903] [ 5.001903] but task is already holding lock: [ 5.001909] c176df78 (dma_fence_map){++++}-{0:0}, at: imx_drm_atomic_commit_tail+0x10/0x160 [ 5.001957] [ 5.001957] which lock already depends on the new lock. ... Revert it for now. Tested on a imx6q-sabresd. Fixes: f4b34faa0842 ("drm/imx: Annotate dma-fence critical section in commit path") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211104001112.4035691-1-festevam@gmail.com
2021-09-01Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds6-27/+3
Pull drm updates from Dave Airlie: "Highlights: - i915 has seen a lot of refactoring and uAPI cleanups due to a change in the upstream direction going forward This has all been audited with known userspace, but there may be some pitfalls that were missed. - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs - i915 enables Jasper and Elkhart Lake by default and has preliminary XeHP/DG2 support - amdgpu adds support for Cyan Skillfish - lots of implicit fencing rules documented and fixed up in drivers - msm now uses the core scheduler - the irq midlayer has been removed for non-legacy drivers - the sysfb code now works on more than x86. Otherwise the usual smattering of stuff everywhere, panels, bridges, refactorings. Detailed summary: core: - extract i915 eDP backlight into core - DP aux bus support - drm_device.irq_enabled removed - port drivers to native irq interfaces - export gem shadow plane handling for vgem - print proper driver name in framebuffer registration - driver fixes for implicit fencing rules - ARM fixed rate compression modifier added - updated fb damage handling - rmfb ioctl logging/docs - drop drm_gem_object_put_locked - define DRM_FORMAT_MAX_PLANES - add gem fb vmap/vunmap helpers - add lockdep_assert(once) helpers - mark drm irq midlayer as legacy - use offset adjusted bo mapping conversion vgaarb: - cleanups fbdev: - extend efifb handling to all arches - div by 0 fixes for multiple drivers udmabuf: - add hugepage mapping support dma-buf: - non-dynamic exporter fixups - document implicit fencing rules amdgpu: - Initial Cyan Skillfish support - switch virtual DCE over to vkms based atomic - VCN/JPEG power down fixes - NAVI PCIE link handling fixes - AMD HDMI freesync fixes - Yellow Carp + Beige Goby fixes - Clockgating/S0ix/SMU/EEPROM fixes - embed hw fence in job - rework dma-resv handling - ensure eviction to system ram amdkfd: - uapi: SVM address range query added - sysfs leak fix - GPUVM TLB optimizations - vmfault/migration counters i915: - Enable JSL and EHL by default - preliminary XeHP/DG2 support - remove all CNL support (never shipped) - move to TTM for discrete memory support - allow mixed object mmap handling - GEM uAPI spring cleaning - add I915_MMAP_OBJECT_FIXED - reinstate ADL-P mmap ioctls - drop a bunch of unused by userspace features - disable and remove GPU relocations - revert some i915 misfeatures - major refactoring of GuC for Gen11+ - execbuffer object locking separate step - reject caching/set-domain on discrete - Enable pipe DMC loading on XE-LPD and ADL-P - add PSF GV point support - Refactor and fix DDI buffer translations - Clean up FBC CFB allocation code - Finish INTEL_GEN() and friends macro conversions nouveau: - add eDP backlight support - implicit fence fix msm: - a680/7c3 support - drm/scheduler conversion panfrost: - rework GPU reset virtio: - fix fencing for planes ast: - add detect support bochs: - move to tiny GPU driver vc4: - use hotplug irqs - HDMI codec support vmwgfx: - use internal vmware device headers ingenic: - demidlayering irq rcar-du: - shutdown fixes - convert to bridge connector helpers zynqmp-dsub: - misc fixes mgag200: - convert PLL handling to atomic mediatek: - MT8133 AAL support - gem mmap object support - MT8167 support etnaviv: - NXP Layerscape LS1028A SoC support - GEM mmap cleanups tegra: - new user API exynos: - missing unlock fix - build warning fix - use refcount_t" * tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits) drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box drm/amd/display: Remove duplicate dml init drm/amd/display: Update bounding box states (v2) drm/amd/display: Update number of DCN3 clock states drm/amdgpu: disable GFX CGCG in aldebaran drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amdgpu: Add support for RAS XGMI err query drm/amdkfd: Account for SH/SE count when setting up cu masks. drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain drm/amdgpu: drop redundant cancel_delayed_work_sync call drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend drm/amdkfd: map SVM range with correct access permission drm/amdkfd: check access permisson to restore retry fault drm/amdgpu: Update RAS XGMI Error Query drm/amdgpu: Add driver infrastructure for MCA RAS drm/amd/display: Add Logging for HDMI color depth information drm/amd/amdgpu: consolidate PSP TA init shared buf functions drm/amd/amdgpu: add name field back to ras_common_if drm/amdgpu: Fix build with missing pm_suspend_target_state module export ...
2021-08-16drm/imx: ipuv3-plane: fix accidental partial revert of 8 pixel alignment fixPhilipp Zabel1-1/+1
This fixes an accidental partial revert of commit 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix") during a rebase of commit fc1e985b67f9 ("drm/imx: ipuv3-plane: add color encoding and range properties"). Fixes: fc1e985b67f9 ("drm/imx: ipuv3-plane: add color encoding and range properties") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210816131728.30987-1-p.zabel@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-07-28drm/bridge: Centralize error message when bridge attach failsLaurent Pinchart3-11/+3
Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
2021-06-29drm/imx/dcss: Don't set struct drm_device.irq_enabledThomas Zimmermann1-3/+0
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in dcss. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-13-tzimmermann@suse.de
2021-06-29drm/imx: Don't set struct drm_device.irq_enabledThomas Zimmermann1-11/+0
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in imx. v3: * move dcss changes into separate patch (Laurentiu) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-12-tzimmermann@suse.de
2021-06-24drm/<driver>: drm_gem_plane_helper_prepare_fb is now the defaultDaniel Vetter2-2/+0
No need to set it explicitly. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jyri Sarha <jyri.sarha@iki.fi> Cc: Tomi Valkeinen <tomba@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-9-daniel.vetter@ffwll.ch
2021-05-20Merge tag 'imx-drm-next-2021-05-12' of git://git.pengutronix.de/git/pza/linux into drm-nextDave Airlie4-21/+131
drm/imx: fixes, dma-fence annotation, and color encoding/range plane properties - Annotate dma-fence critical section in atomic_commit_tail - Fix PRG modifiers after drmm resource conversion to regain tiled scanout capability - Add 8 pixel alignment fix to support 1366x768 resolution - Stop advertising YUV formats on planes that don't support them - Add COLOR_ENCODING and COLOR_RANGE plane properties on planes that support them - Remove unnecessarily exported symbols Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/858310d193e10fc17221418dee6172af367eb046.camel@pengutronix.de
2021-05-10drm/imx: ipuv3-plane: add color encoding and range propertiesPhilipp Zabel1-1/+31
Add COLOR_ENCODING and COLOR_RANGE plane properties and use them to control the DP CSC matrix. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10gpu: ipu-v3: Add Rec.709 limited range support to DPPhilipp Zabel1-3/+6
Add YCbCr encoding and quantization range parameters to ipu_dp_setup_channel() and configure the CSC DP matrix accordingly. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10drm/imx: ipuv3-plane: fix PRG modifiers after drm managed resource conversionLucas Stach1-7/+9
The conversion to drm managed resources introduced two bugs: the plane is now always initialized with the linear-only list, while the list with the Vivante GPU modifiers should have been used when the PRG/PRE engines are present. This masked another issue, as ipu_plane_format_mod_supported() is now called before the private plane data is set up, so if a non-linear modifier is supplied in the plane modifier list, we run into a NULL pointer dereference checking for the PRG presence. To fix this just remove the check from this function, as we know that it will only be called with a non-linear modifier, if the plane init code has already determined that the PRG/PRE is present. Fixes: 699e7e543f1a ("drm/imx: ipuv3-plane: use drm managed resources") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210510145927.988661-1-l.stach@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10drm/imx: ipuv3-plane: Remove two unnecessary export symbolsLiu Ying1-2/+0
The ipu_plane_disable_deferred() and ipu_planes_assign_pre() functions have not been used by any other modules but only imxdrm itself internally since imxdrm and imx-ipuv3-crtc were merged in one module. So, this patch removes export symbols for the two functions. Fixes: 3d1df96ad468 (drm/imx: merge imx-drm-core and ipuv3-crtc in one module) Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10drm/imx: Add 8 pixel alignment fixSebastian Reichel4-6/+48
Some standard resolutions like 1366x768 do not work properly with i.MX6 SoCs, since the horizontal resolution needs to be aligned to 8 pixels (so 1360x768 or 1368x768 would work). This patch allocates framebuffers allocated to 8 pixels. The extra time required to send the extra pixels are removed from the blank time. In order to expose the correct display size to userspace, the stride is increased without increasing the width. Without this patch systems with this display resolution hang indefinitely during boot up. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210428222953.235280-3-sebastian.reichel@collabora.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10drm/imx: Annotate dma-fence critical section in commit pathDaniel Vetter1-0/+2
drm_atomic_helper_commit_hw_done() is the last thing (no plane cleanup apparrently), so it's the entire function. And a nice comment explaining why the wait_for_flip_done is ahead, unlike the usual sequence. Aside, I think since the atomic helpers do track plane disabling now separately this might no longer be a real problem since: commit 21a01abbe32a3cbeb903378a24e504bfd9fe0648 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Sep 4 12:48:37 2017 +0200 drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3. Plus the subsequent bugfixes of course, this was tricky to get right. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10drm/imx: ipuv3-plane: do not advertise YUV formats on planes without CSCPhilipp Zabel1-4/+37
Only planes that are displayed via the Display Processor (DP) path support color space conversion. Limit formats on planes that are shown via the direct Display Controller (DC) path to RGB. Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-04-26Merge drm/drm-next into drm-misc-nextMaxime Ripard2-2/+12
Christian needs some patches from drm/next Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-04-15drm/imx: Don't set allow_fb_modifiers explicitlyDaniel Vetter2-2/+0
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here for both dcss and imx-drm drivers. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-5-daniel.vetter@ffwll.ch
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter2-2/+12
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-03-25drm/imx: imx-ldb: fix out of bounds array access warningArnd Bergmann1-0/+10
When CONFIG_OF is disabled, building with 'make W=1' produces warnings about out of bounds array access: drivers/gpu/drm/imx/imx-ldb.c: In function 'imx_ldb_set_clock.constprop': drivers/gpu/drm/imx/imx-ldb.c:186:8: error: array subscript -22 is below array bounds of 'struct clk *[4]' [-Werror=array-bounds] Add an error check before the index is used, which helps with the warning, as well as any possible other error condition that may be triggered at runtime. The warning could be fixed by adding a Kconfig depedency on CONFIG_OF, but Liu Ying points out that the driver may hit the out-of-bounds problem at runtime anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-03-25drm/imx: imx-ldb: Register LDB channel1 when it is the only channel to be usedLiu Ying1-1/+1
LDB channel1 should be registered if it is the only channel to be used. Without this patch, imx_ldb_bind() would skip registering LDB channel1 if LDB channel0 is not used, no matter LDB channel1 needs to be used or not. Fixes: 8767f4711b2b (drm/imx: imx-ldb: move initialization into probe) Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-03-25drm/imx: fix memory leak when fails to initPan Bian1-1/+1
Put DRM device on initialization failure path rather than directly return error code. Fixes: a67d5088ceb8 ("drm/imx: drop explicit drm_mode_config_cleanup") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie2-71/+85
drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard2-2/+4
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard2-4/+8
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Rename plane->state variables in atomic update and disableMaxime Ripard2-34/+36
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
2021-02-24drm: Use state helper instead of plane state pointer in atomic_checkMaxime Ripard1-1/+2
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_check hook, which would be the old plane state in the global atomic state since _swap_state hasn't happened when atomic_check is run. Use the drm_atomic_get_old_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ replaces_old_state @ identifier plane_atomic_func.func; identifier plane, state, plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = plane->state; + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @@ identifier plane_atomic_func.func; identifier plane, state, plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <... - plane->state + plane_state ...> } @ adds_old_state @ identifier plane_atomic_func.func; identifier plane, state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); <... - plane->state + old_plane_state ...> } @ include depends on adds_old_state || replaces_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && (adds_old_state || replaces_old_state) @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-6-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard2-2/+2
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard2-2/+6
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard2-28/+29
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann2-4/+4
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-01-07drm/imx: dw_hdmi-imx: depend on OF to fix randconfig compile tests on x86_64Philipp Zabel1-1/+1
The i.MX6 HDMI driver uses of_drm_find_bridge() and thus cannot be built with CONFIG_OF disabled: ld: drivers/gpu/drm/imx/dw_hdmi-imx.o: in function `dw_hdmi_imx_probe': dw_hdmi-imx.c:(.text+0x29f): undefined reference to `of_drm_find_bridge' Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Fixes: c805ec7eb210 ("drm/imx: dw_hdmi-imx: move initialization into probe") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-01-04drm/imx: ipuv3-crtc: use drm managed resourcesPhilipp Zabel1-71/+43
Use use drmm_crtc_alloc_with_planes() to align crtc memory lifetime with the drm device. drm_crtc_cleanup() is called automatically before the memory is freed. Also use drmm_add_action_or_reset() to make sure IPU resources are released automatically. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: ipuv3-plane: use drm managed resourcesPhilipp Zabel3-63/+36
Use drmm_universal_plane_alloc() to align plane memory lifetime with the drm device. drm_plane_cleanup() is called automatically before the memory is freed. Also move the call to ipu_plane_get_resources() into ipu_plane_init() and use drm managed resources to put IPU resources automatically when required. Handle error return values of the plane property creation functions. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: parallel-display: use drm managed resourcesPhilipp Zabel1-28/+29
Use drmm_simple_encoder_alloc() to align encoder memory lifetime with the drm device. drm_encoder_cleanup() is called automatically before the memory is freed. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: imx-tve: use drm managed resourcesPhilipp Zabel1-35/+39
Use drmm_simple_encoder_alloc() to align encoder memory lifetime with the drm device. drm_encoder_cleanup() is called automatically before the memory is freed. Also fold imx_tve_register() into imx_tve_bind(). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: imx-ldb: use drm managed resourcesPhilipp Zabel1-9/+22
Use drmm_simple_encoder_alloc() to align encoder memory lifetime with the drm device. drm_encoder_cleanup() is called automatically before the memory is freed. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: dw_hdmi-imx: use drm managed resourcesPhilipp Zabel1-8/+17
Use drmm_simple_encoder_alloc() to align encoder memory lifetime with the drm device. drm_encoder_cleanup() is called automatically. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: parallel-display: move initialization into probePhilipp Zabel1-22/+20
Parts of the initialization that do not require the drm device can be done once during probe instead of possibly multiple times during bind. The bind function only creates the encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: parallel-display: use local bridge and connector variablesPhilipp Zabel1-10/+10
Use local variables for bridge and connector. This simplifies the following commits. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: imx-tve: use devm_clk_registerPhilipp Zabel1-1/+1
Avoid leaking the clock provider when the driver is unbound. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: imx-tve: move initialization into probePhilipp Zabel1-23/+19
Parts of the initialization that do not require the drm device can be done once during probe instead of possibly multiple times during bind. The bind function only creates the encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: imx-tve: use local encoder and connector variablesPhilipp Zabel1-7/+8
Introduce local variables for encoder and connector. This simplifies the following commits. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: imx-ldb: move initialization into probePhilipp Zabel1-35/+37
Parts of the initialization that do not require the drm device can be done once during probe instead of possibly multiple times during bind. The bind function only creates the encoders. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: imx-ldb: use local connector variablePhilipp Zabel1-6/+6
Use a local variable for the connector. This simplifies the following commits. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: dw_hdmi-imx: move initialization into probePhilipp Zabel1-48/+26
Parts of the initialization that do not require the drm device can be done once during probe instead of possibly multiple times during bind. The bind function only creates the encoder and attaches the bridge. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04gpu: drm: imx: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-01-04drm/imx: depend on COMMON_CLK to fix compile testsKrzysztof Kozlowski1-0/+1
The iMX DRM LVDS driver uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with RALINK and SOC_RT305X): /usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/imx/imx-ldb.o: in function `imx_ldb_encoder_disable': imx-ldb.c:(.text+0x400): undefined reference to `clk_set_parent' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-11-26drm/imx/dcss: allow using nearest neighbor interpolation scalingLaurentiu Palcu3-10/+50
This patch adds support for using NN interpolation scaling by setting the SCALING_FILTER plane property to 1. Otherwise, the default method is used. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105145018.27255-1-laurentiu.palcu@oss.nxp.com
2020-11-26drm/imx/dcss: fix coccinelle warningLaurentiu Palcu1-2/+1
This small patch fixes a warning that I got while running coccinelle: CHECK drivers/gpu/drm/imx/dcss/dcss-plane.c drivers/gpu/drm/imx/dcss/dcss-plane.c:107:21-23: WARNING !A || A && B is equivalent to !A || B Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ") Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105140127.25249-3-laurentiu.palcu@oss.nxp.com
2020-11-26drm/imx/dcss: fix rotations for Vivante tiled formatsLaurentiu Palcu1-2/+9
DCSS supports 90/180/270 degree rotations for Vivante tiled and super-tiled formats. Unfortunately, with the current code, they didn't work properly. This simple patch makes the rotations work by fixing the way the scaler is set up for 90/270 degree rotations. In this particular case, the source width and height need to be swapped since DPR is sending the buffer to scaler already rotated. Also, make sure to allow full rotations for DRM_FORMAT_MOD_VIVANTE_SUPER_TILED. Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ") Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105140127.25249-2-laurentiu.palcu@oss.nxp.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.