aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-03drm/msm: dpu: Don't reset dpu_enc->cur_master on .disable()Sean Paul1-2/+2
cur_master in dpu_encoder is assigned at modeset and cleared on .disable(). Unfortunately dpms (or enable/disable) does not guarantee a modeset, so cur_master is NULL when we try to re-enable it. This patch moves the NULL assignment to setup_display where it will be re-assigned later in the function. Tested-by: Bruce Wang <bzwang@chromium.org> Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Add extra_flush_bits to trigger_flush traceSean Paul1-1/+2
It's useful to know which bits of the flush come from extra_flush_bits Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Clear frame_busy_mask bit after traceSean Paul1-1/+1
We're printing the frame_busy_mask in a trace, but after it's been cleared. This, as it turns out, is pretty pointless. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove RM topology definitionJeykumar Sankaran1-3/+0
RM maintained a redundant definition for display topology to identify the no. of hw blocks needed for a display and their hardware dependencies. This information can be implicitly deduced from the msm_display_topology structure available in RM reserve request. In addition to getting rid of the redundant topology, this change also removes the topology name enums and their usages. changes in v4: - remove the topology name enum entirely (Sean) changes in v5: - remove RM topology definition and their references (Sean) - Implement helper for dual mixer CRTC (Sean) changes in v6: - avoid heap memory for topology (Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: relax parameter validation in encodersJeykumar Sankaran1-6/+0
DPU, being over protective, validates every parameter of a module. This change traces the call stack for some of encoder functions affected by previous set of clean up patches and cleans up unwanted validations. changes in v5: - Introduced in the series changes in v6: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove RM dependency on connector stateJeykumar Sankaran1-8/+7
Connector states were passed around RM to update the custom topology connector property with chosen topology data. Now that we got rid of both custom properties and topology names, this change cleans up the mechanism to pass connector states across RM helpers and encoder functions. changes in v5: - Introduced in the series changes in v6: - remove parameter checking in rm reserve (Jordan) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove display H_TILE from encoderJeykumar Sankaran1-5/+0
Encoder H_TILE values are not used for allocating the hw blocks. no. of hw_intf blocks provides the info. changes in v4: - remove irrelevant changes (Sean) - retain log macros (Sean) changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: iterate for assigned hw ctl in virtual encoderJeykumar Sankaran1-3/+20
In virtual encoder modeset, DPU makes RM request to assign hw blocks for the display. It is also expected in modeset to iterate and associate the physical encoders with their relevant hw blocks. Ping pong blocks are already handled here but hw ctl blocks are not. This change moves the hw_ctl iteration and mapping from physical encoder to virtual encoder. changes in v4: - Fix hw_ctl initialization (Sean) changes in v5: - Update commit text with details on why the change is needed (Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: enable master-slave encoders explicitlyJeykumar Sankaran1-31/+12
Identify slave-master encoders during initialization and enable the encoders explicitly as the current logic has redundant and ambiguous loops. changes in v4: - identify master/slave encoder while adding adding physical encoders(Sean) changes in v5: - get rid of temporary variable for phys enc(Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove debugfs support for misrJeykumar Sankaran1-127/+0
MISR support is the debug feature present in Snapdragon chipsets. At the layer mixer and interfaces, MISR algorithm can generate CRC signatures of the pixel data which can be used for validating the frames generated. Since there are no clients for this feature, strip down the support from the driver. changes in v4: - changed introduced in the series changes in v5: - update commit text with the need for the change(Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: use encoder type to identify display typeJeykumar Sankaran1-4/+4
With patch [1], DPU is broken since it continues to use incorrect connector_type to identify the display type. Update DPU to use the encoder type to get the info. [1] https://patchwork.kernel.org/patch/10568269/ Acked-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove unwanted encoder type mappingJeykumar Sankaran1-14/+6
This change gets rid of unwanted connector-encoder type mapping used for dsi-staging driver. Now that DPU will be using upstream DSI driver, remove the stale code. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove stale display port programmingJeykumar Sankaran1-6/+0
Remove stale display port programming. It can be added back with DPU support for display port. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-08-10drm/msm/disp/dpu: fix early dereference of physical encoderJeykumar Sankaran1-1/+3
This change validates the physical encoder before it is dereferenced. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-31drm/msm/disp/dpu: fix two spelling mistakesColin Ian King1-1/+1
Trivial fix to spelling mistake in error messages "diable" -> "disable" "cliend" -> "client" Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-30drm/msm/disp/dpu: Mark a handful of functions as staticJordan Crouse1-2/+5
Mark a number of static functions that are only unsed in the file that defines them and remove the prototypes from the headers where needed. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-30drm/msm/disp/dpu: Remove unused code from drm_encoder.cJordan Crouse1-80/+0
Remove dpu_encoder_check_mode and dpu_encoder_helper_hw_release frmo drm_encoder.c as they appear to be unused. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: Add SDM845 DPU supportJeykumar Sankaran1-0/+2575
SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.