aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
2021-10-15drm/msm/dp: Allow sub-regions to be specified in DTBjorn Andersson1-11/+38
Not all platforms has P0 at an offset of 0x1000 from the base address, so add support for specifying each sub-region in DT. The code falls back to the predefined offsets in the case that only a single reg is specified, in order to support existing DT. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211001174400.981707-6-bjorn.andersson@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dp: Store each subblock in the io regionBjorn Andersson3-48/+53
Not all platforms has DP_P0 at offset 0x1000 from the beginning of the DP block. So split the dss_io_data memory region into a set of sub-regions, to make it possible in the next patch to specify each of the sub-regions individually. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211001174400.981707-5-bjorn.andersson@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dp: Refactor ioremap wrapperBjorn Andersson2-25/+12
In order to deal with multiple memory ranges in the following commit change the ioremap wrapper to not poke directly into the dss_io_data struct. While at it, devm_ioremap_resource() already prints useful error messages on failure, so omit the unnecessary prints from the caller. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211001174400.981707-4-bjorn.andersson@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dp: Use devres for ioremap()Bjorn Andersson1-25/+4
The non-devres version of ioremap is used, which requires manual cleanup. But the code paths leading here is mixed with other devres users, so rely on this for ioremap as well to simplify the code. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211001174400.981707-3-bjorn.andersson@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: potential error pointer dereference in init()Dan Carpenter1-0/+4
The msm_iommu_new() returns error pointers on failure so check for that to avoid an Oops. Fixes: ccac7ce373c1 ("drm/msm: Refactor address space initialization") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211004103806.GD25015@kili Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: Fix potential Oops in a6xx_gmu_rpmh_init()Dan Carpenter1-3/+3
There are two problems here: 1) The "seqptr" is used uninitalized when we free it at the end. 2) The a6xx_gmu_get_mmio() function returns error pointers. It never returns true. Fixes: 64245fc55172 ("drm/msm/a6xx: use AOP-initialized PDC for a650") Fixes: f8fc924e088e ("drm/msm/a6xx: Fix PDC register overlap") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211004134530.GB11689@kili Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: do not enable irq handler before powering up the hostDmitry Baryshkov3-17/+49
The DSI host might be left in some state by the bootloader. If this state generates an IRQ, it might hang the system by holding the interrupt line before the driver sets up the DSI host to the known state. Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to it. Call enable/disable_irq after msm_dsi_host_power_on/_off() functions, so that we can be sure that the interrupt is delivered when the host is in the known state. It is not possible to defer the interrupt enablement to a later point, because drm_panel_prepare might need to communicate with the panel over the DSI link and that requires working interrupt. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/mdp5: Add configuration for MDP v1.16Vladimir Lypak1-0/+89
MDP version v1.16 is almost identical to v1.15 with most significant difference being presence of second DSI interface. MDP v1.16 is found on SoCs such as MSM8x53, SDM450, SDM632 (All with Adreno 506). Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210928131929.18567-4-sireeshkodali1@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: Add phy configuration for MSM8953Vladimir Lypak3-0/+24
Add phy configuration for 14nm dsi phy found on MSM8953 SoC. Only difference from existing configurations are io_start addresses. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Link: https://lore.kernel.org/r/20210928131929.18567-3-sireeshkodali1@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm: Use IS_ERR() instead of IS_ERR_OR_NULL()Wang Qing1-2/+2
dev_pm_opp_find_freq_exact never return null but ERR_PTR(),so we should use IS_ERR() to clarify and avoid compilation warnings. Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1604630714-6163-1-git-send-email-wangqing@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm: msm: adreno: use DEFINE_DEBUGFS_ATTRIBUTE with debugfs_create_file_unsafe()Deepak R Varma1-3/+3
Using DEFINE_DEBUGFS_ATTRIBUTE macro with debugfs_create_file_unsafe() function in place of the debugfs_create_file() function will make the file operation struct "reset" aware of the file's lifetime. Additional details here: https://lists.archive.carbon60.com/linux/kernel/2369498 Issue reported by Coccinelle script: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com> Link: https://lore.kernel.org/r/9ca2c2e4cbd9ebb282b90f742305fd9b481aacc2.1603998014.git.mh12gx2825@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: delete conversion from bool value to bool returnBernard1-1/+1
Delete the conversion from bool value to bool function return. Signed-off-by: Bernard Zhao <bernard@vivo.com> Link: https://lore.kernel.org/r/AI*ANACSDfnjQejyeNXUnKoQ.1.1604995827401.Hmail.bernard@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/mdp5: Remove redundant null check before clk_prepare_enable/clk_disable_unprepareXu Wang2-20/+10
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201231094935.25737-1-vulab@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: dsi: Remove redundant null check before clk_prepare_enable/clk_disable_unprepareXu Wang1-9/+6
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201231095616.25973-1-vulab@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/mdp4: Remove redundant null check before clk_prepare_enable/clk_disable_unprepareXu Wang1-12/+6
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201231094155.25481-1-vulab@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: fix warning "using plain integer as NULL pointer"Bernard Zhao1-2/+2
Fix sparse warning: drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1195:41: warning: Using plain integer as NULL pointer drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1348:32: warning: Using plain integer as NULL pointer Signed-off-by: Bernard Zhao <bernard@vivo.com> Link: https://lore.kernel.org/r/20210510031250.5303-1-bernard@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: prevent NULL dereference in msm_gpu_crashstate_capture()Tim Gardner1-1/+1
Coverity complains of a possible NULL dereference: CID 120718 (#1 of 1): Dereference null return value (NULL_RETURNS) 23. dereference: Dereferencing a pointer that might be NULL state->bos when calling msm_gpu_crashstate_get_bo. [show details] 301 msm_gpu_crashstate_get_bo(state, submit->bos[i].obj, 302 submit->bos[i].iova, submit->bos[i].flags); Fix this by employing the same state->bos NULL check as is used in the next for loop. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210929162554.14295-1-tim.gardner@canonical.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dp: Remove redundant initialization of variable bppColin Ian King1-1/+1
The variable bpp is being initialized with a value that is never read, it is being updated later on in both paths of an if statement. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210929105458.209895-1-colin.king@canonical.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dpu: Remove some nonsenseRob Clark2-14/+0
These aren't used. And if we add use for them later, we should probably do something a bit more structured than string parsing. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210928162903.1104847-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: Support NO_CONNECTOR bridgesRob Clark2-13/+39
For now, since we have a mix of bridges which support this flag, which which do *not* support this flag, or work both ways, try it once with NO_CONNECTOR and then fall back to the old way if that doesn't work. Eventually we can drop the fallback path. v2: Add missing drm_connector_attach_encoder() so display actually comes up when the bridge properly handles the NO_CONNECTOR flag Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210920225801.227211-2-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm: msm: hdmi: Constify static structsRikard Falkeborn1-2/+2
The only usage of hdmi_8996_pll_ops is to assign its address to the ops field in the clk_init_data struct, and the only usage of pll_init is to assign its address to the init field in the clk_hw struct, both which are pointers to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210920212014.40520-1-rikard.falkeborn@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: Use division result from div_u64_rem in 7nm and 14nm PLLMarijn Suijten2-6/+2
div_u64_rem provides the result of the division and additionally the remainder; don't use this function to solely calculate the remainder while calculating the division again with div_u64. A similar improvement was applied earlier to the 10nm pll in 5c191fef4ce2 ("drm/msm/dsi_pll_10nm: Fix dividing the same numbers twice"). Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211011201642.167700-1-marijn.suijten@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: Remove initialization of static variableszhaoxiao1-2/+2
Address the following checkpatch errors: ERROR: do not initialise statics to false FILE: :drivers/gpu/drm/msm/msm_drv.c:21: -static bool reglog = false; FILE: :drivers/gpu/drm/msm/msm_drv.c:31: -bool dumpstate = false; Signed-off-by: zhaoxiao <long870912@gmail.com> Link: https://lore.kernel.org/r/20210906064315.4975-1-long870912@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: remove unneeded variableChi Minghao1-3/+1
Fix the following coccicheck REVIEW: ./drivers/gpu/drm/msm/edp/edp_ctrl.c:1245:5-8 Unneeded variable Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Chi Minghao <chi.minghao@zte.com.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210831115127.18236-1-chi.minghao@zte.com.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: Change dpu_crtc_get_vblank_counter to use vsync count.Mark Yacoub3-19/+9
[why] vsync_cnt atomic counter increments for every hw vsync. On the other hand, frame count is a register that increments when the frame gets actually pushed out. We cannnot read this register whenever the timing engine is off, but vblank counter should still return a valid number. This behavior also matches the downstream driver. [How] Read the encoder vsync count instead of the dpu_encoder_phys frame count. Suggested-by: Abhinav Kumar <abhinavk@codeaurora.org> CC: Rob Clark <robdclark@chromium.org> Signed-off-by: Mark Yacoub <markyacoub@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210830181359.124267-1-markyacoub@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dpu: merge struct dpu_irq into struct dpu_hw_intrDmitry Baryshkov3-41/+28
As dpu_core_irq was merged into dpu_hw_intr, merge data structures too, removing the need for a separate data structure. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210617222029.463045-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dpu: don't clear IRQ register twiceDmitry Baryshkov1-17/+0
We already clear the IRQ status register before processing IRQs, so do not clear the register again. Especially do not clear the IRQ status _after_ processing the IRQ as this way we can loose the event. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210617222029.463045-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dpu: squash dpu_core_irq into dpu_hw_interruptsDmitry Baryshkov4-399/+214
With dpu_core_irq being the wrapper around dpu_hw_interrupts, there is little sense in having them separate. Squash them together to remove another layer of abstraction (hw_intr ops). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210617222029.463045-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-12Merge tag 'drm-msm-fixes-2021-10-11' of https://gitlab.freedesktop.org/drm/msm into drm-fixesDave Airlie20-112/+256
* Fix a new crash on dev file close if the dev file was opened when GPU is not loaded (such as missing fw in initrd) * Switch to single drm_sched_entity per priority level per drm_file to unbreak multi-context userspace * Serialize GMU access to fix GMU OOB errors * Various error path fixes * A couple integer overflow fixes * Fix mdp5 cursor plane WARNs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtD4u7yyiy+BQLmibUCbn=AdDRu7FrmdViHVx0QrcGf8g@mail.gmail.com
2021-10-11drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handlingDan Carpenter1-1/+1
This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52eba9e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()Dan Carpenter1-1/+3
Return an error code if msm_dsi_manager_validate_current_config(). Don't return success. Fixes: 8b03ad30e314 ("drm/msm/dsi: Use one connector for dual DSI mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211001123308.GF2283@kili Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_readyMarijn Suijten1-15/+15
The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302 Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dsi/phy: fix clock names in 28nm_8960 phyDmitry Baryshkov1-2/+2
The commit 9f91f22aafcd ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") mistakenly changed registered clock names. While the platform is in progress of migration to using clock properties in the dts rather than the global clock names, we should provide backwards compatibility. Thus restore registerd global clock names. Fixes: 9f91f22aafcd ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210921162245.1858118-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dpu: Fix address of SM8150 PINGPONG5 IRQ registerRobert Foss1-1/+1
Both PINGPONG4 and PINGPONG5 IRQ registers are using the same address, which is incorrect. PINGPONG4 should use the register offset 30, and PINGPONG5 should use the register offset 31 according to the downstream driver. Fixes: 667e9985ee24 ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog") Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210819133636.2045766-1-robert.foss@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm: Do not run snapshot on non-DPU devicesFabio Estevam1-4/+5
Since commit 98659487b845 ("drm/msm: add support to take dpu snapshot") the following NULL pointer dereference is seen on i.MX53: [ 3.275493] msm msm: bound 30000000.gpu (ops a3xx_ops) [ 3.287174] [drm] Initialized msm 1.8.0 20130625 for msm on minor 0 [ 3.293915] 8<--- cut here --- [ 3.297012] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 3.305244] pgd = (ptrval) [ 3.307989] [00000028] *pgd=00000000 [ 3.311624] Internal error: Oops: 805 [#1] SMP ARM [ 3.316430] Modules linked in: [ 3.319503] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+g682d702b426b #1 [ 3.326652] Hardware name: Freescale i.MX53 (Device Tree Support) [ 3.332754] PC is at __mutex_init+0x14/0x54 [ 3.336969] LR is at msm_disp_snapshot_init+0x24/0xa0 i.MX53 does not use the DPU controller. Fix the problem by only calling msm_disp_snapshot_init() on platforms that use the DPU controller. Cc: stable@vger.kernel.org Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210914174831.2044420-1-festevam@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/a3xx: fix error handling in a3xx_gpu_init()Dan Carpenter1-4/+5
These error paths returned 1 on failure, instead of a negative error code. This would lead to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" did not work because "ret" was set to 1. Fixes: 5785dd7a8ef0 ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211001125904.GK2283@kili Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/a4xx: fix error handling in a4xx_gpu_init()Dan Carpenter1-4/+5
This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1. Fixes: 5785dd7a8ef0 ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211001125759.GJ2283@kili Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm: Fix null pointer dereference on pointer edpColin Ian King1-1/+2
The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: ab5b0107ccf3 ("drm/msm: Initial add eDP support in msm drm driver (v5)") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210929121857.213922-1-colin.king@canonical.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/mdp5: fix cursor-related warningsDmitry Baryshkov1-0/+16
Since f35a2a99100f ("drm/encoder: make encoder control functions optional") drm_mode_config_validate would print warnings if both cursor plane and cursor functions are provided. Restore separate set of drm_crtc_funcs to be used if separate cursor plane is provided. [ 6.556046] ------------[ cut here ]------------ [ 6.556071] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_set func [ 6.556091] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:648 drm_mode_config_validate+0x238/0x4d0 [ 6.567453] Modules linked in: [ 6.577604] CPU: 1 PID: 76 Comm: kworker/u8:2 Not tainted 5.15.0-rc1-dirty #43 [ 6.580557] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.587763] Workqueue: events_unbound deferred_probe_work_func [ 6.593926] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.599740] pc : drm_mode_config_validate+0x238/0x4d0 [ 6.606596] lr : drm_mode_config_validate+0x238/0x4d0 [ 6.611804] sp : ffff8000121b3980 [ 6.616838] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.620140] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.627258] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.634376] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.641494] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c78709 [ 6.648613] x14: 0000000000000000 x13: ffff800011a22850 x12: 00000000000009ab [ 6.655730] x11: 0000000000000339 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.662848] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.669966] x5 : 000000000000bff4 x4 : 40000000fffff339 x3 : 0000000000000000 [ 6.677084] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.684205] Call trace: [ 6.691319] drm_mode_config_validate+0x238/0x4d0 [ 6.693577] drm_dev_register+0x17c/0x210 [ 6.698435] msm_drm_bind+0x4b4/0x694 [ 6.702429] try_to_bring_up_master+0x164/0x1d0 [ 6.706075] __component_add+0xa0/0x170 [ 6.710415] component_add+0x14/0x20 [ 6.714234] msm_hdmi_dev_probe+0x1c/0x2c [ 6.718053] platform_probe+0x68/0xe0 [ 6.721959] really_probe.part.0+0x9c/0x30c [ 6.725606] __driver_probe_device+0x98/0x144 [ 6.729600] driver_probe_device+0xc8/0x15c [ 6.734114] __device_attach_driver+0xb4/0x120 [ 6.738106] bus_for_each_drv+0x78/0xd0 [ 6.742619] __device_attach+0xdc/0x184 [ 6.746351] device_initial_probe+0x14/0x20 [ 6.750172] bus_probe_device+0x9c/0xa4 [ 6.754337] deferred_probe_work_func+0x88/0xc0 [ 6.758158] process_one_work+0x1d0/0x370 [ 6.762671] worker_thread+0x2c8/0x470 [ 6.766839] kthread+0x15c/0x170 [ 6.770483] ret_from_fork+0x10/0x20 [ 6.773870] ---[ end trace 5884eb76cd26d274 ]--- [ 6.777500] ------------[ cut here ]------------ [ 6.782043] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_move func [ 6.782063] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:654 drm_mode_config_validate+0x290/0x4d0 [ 6.794362] Modules linked in: [ 6.804600] CPU: 1 PID: 76 Comm: kworker/u8:2 Tainted: G W 5.15.0-rc1-dirty #43 [ 6.807555] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.816148] Workqueue: events_unbound deferred_probe_work_func [ 6.822311] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.828126] pc : drm_mode_config_validate+0x290/0x4d0 [ 6.834981] lr : drm_mode_config_validate+0x290/0x4d0 [ 6.840189] sp : ffff8000121b3980 [ 6.845223] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.848525] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.855643] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.862763] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.869879] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c790c2 [ 6.876998] x14: 0000000000000000 x13: ffff800011a22850 x12: 0000000000000a2f [ 6.884116] x11: 0000000000000365 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.891234] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.898351] x5 : 000000000000bff4 x4 : 40000000fffff365 x3 : 0000000000000000 [ 6.905470] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.912590] Call trace: [ 6.919702] drm_mode_config_validate+0x290/0x4d0 [ 6.921960] drm_dev_register+0x17c/0x210 [ 6.926821] msm_drm_bind+0x4b4/0x694 [ 6.930813] try_to_bring_up_master+0x164/0x1d0 [ 6.934459] __component_add+0xa0/0x170 [ 6.938799] component_add+0x14/0x20 [ 6.942619] msm_hdmi_dev_probe+0x1c/0x2c [ 6.946438] platform_probe+0x68/0xe0 [ 6.950345] really_probe.part.0+0x9c/0x30c [ 6.953991] __driver_probe_device+0x98/0x144 [ 6.957984] driver_probe_device+0xc8/0x15c [ 6.962498] __device_attach_driver+0xb4/0x120 [ 6.966492] bus_for_each_drv+0x78/0xd0 [ 6.971004] __device_attach+0xdc/0x184 [ 6.974737] device_initial_probe+0x14/0x20 [ 6.978556] bus_probe_device+0x9c/0xa4 [ 6.982722] deferred_probe_work_func+0x88/0xc0 [ 6.986543] process_one_work+0x1d0/0x370 [ 6.991057] worker_thread+0x2c8/0x470 [ 6.995223] kthread+0x15c/0x170 [ 6.998869] ret_from_fork+0x10/0x20 [ 7.002255] ---[ end trace 5884eb76cd26d275 ]--- Fixes: aa649e875daf ("drm/msm/mdp5: mdp5_crtc: Restore cursor state only if LM cursors are enabled") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210925192824.3416259-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm: Avoid potential overflow in timeout_to_jiffies()Marek Vasut1-2/+2
The return type of ktime_divns() is s64. The timeout_to_jiffies() currently assigns the result of this ktime_divns() to unsigned long, which on 32 bit systems may overflow. Furthermore, the result of this function is sometimes also passed to functions which expect signed long, dma_fence_wait_timeout() is one such example. Fix this by adjusting the type of remaining_jiffies to s64, so we do not suffer overflow there, and return a value limited to range of 0..INT_MAX, which is safe for all usecases of this timeout. The above overflow can be triggered if userspace passes in too large timeout value, larger than INT_MAX / HZ seconds. The kernel detects it and complains about "schedule_timeout: wrong timeout value %lx" and generates a warning backtrace. Note that this fixes commit 6cedb8b377bb ("drm/msm: avoid using 'timespec'"), because the previously used timespec_to_jiffies() function returned unsigned long instead of s64: static inline unsigned long timespec_to_jiffies(const struct timespec *value) Fixes: 6cedb8b377bb ("drm/msm: avoid using 'timespec'") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@chromium.org> Cc: stable@vger.kernel.org # 5.6+ Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210917005913.157379-1-marex@denx.de Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm: Fix devfreq NULL pointer dereference on a3xxStephan Gerhold1-0/+6
There is no devfreq on a3xx at the moment since gpu_busy is not implemented. This means that msm_devfreq_init() will return early and the entire devfreq setup is skipped. However, msm_devfreq_active() and msm_devfreq_idle() are still called unconditionally later, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 0 PID: 133 Comm: ring0 Not tainted 5.15.0-rc1 #4 Hardware name: Longcheer L8150 (DT) pc : mutex_lock_io+0x2bc/0x2f0 lr : msm_devfreq_active+0x3c/0xe0 [msm] Call trace: mutex_lock_io+0x2bc/0x2f0 msm_gpu_submit+0x164/0x180 [msm] msm_job_run+0x54/0xe0 [msm] drm_sched_main+0x2b0/0x4a0 [gpu_sched] kthread+0x154/0x160 ret_from_fork+0x10/0x20 Fix this by adding a check in msm_devfreq_active/idle() which ensures that devfreq was actually initialized earlier. Fixes: 9bc95570175a ("drm/msm: Devfreq tuning") Reported-by: Nikita Travkin <nikita@trvn.ru> Tested-by: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210913164556.16284-1-stephan@gerhold.net Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dp: only signal audio when disconnected detected at dp_pm_resumeKuogee Hsieh1-5/+5
Currently there is audio not working problem after system resume from suspend if hdmi monitor stay plugged in at DUT. However this problem does not happen at normal operation but at a particular test case. The root cause is DP driver signal audio with connected state at resume which trigger audio trying to setup audio data path through DP main link but failed due to display port is not setup and enabled by upper layer framework yet. This patch only have DP driver signal audio only when DP is in disconnected state so that audio option shows correct state after system resume. DP driver will not signal audio with connected state until display enabled executed by upper layer framework where display port is setup completed and main link is running. Changes in V2: -- add details commit text Fixes: afc9b8b6bab8 ("drm/msm/dp: signal audio plugged change at dp_pm_resume") Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1632932224-25102-1-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-07qcom_scm: hide Kconfig symbolArnd Bergmann1-2/+2
Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-04Revert "drm/msm: cleanup: drm_modeset_lock_all_ctx() --> DRM_MODESET_LOCK_ALL_BEGIN()"Sean Paul1-6/+6
This reverts commit 4c048437ef7adb2d81fe4ddc5c04179126eefcf2. This patchset breaks on intel platforms and was previously NACK'd by Ville. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Fernando Ramos <greenfoo@u92.eu> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-14-sean@poorly.run
2021-10-04Revert "drm/msm: cleanup: drm_modeset_lock_all() --> DRM_MODESET_LOCK_ALL_BEGIN()"Sean Paul1-6/+4
This reverts commit fd49ef52e2db015ce69ad02bab0702489d141a41. This patchset breaks on intel platforms and was previously NACK'd by Ville. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Fernando Ramos <greenfoo@u92.eu> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-6-sean@poorly.run
2021-10-01drm/msm/submit: fix overflow check on 64-bit architecturesArnd Bergmann1-1/+2
The overflow check does causes a warning from clang-14 when 'sz' is a type that is smaller than size_t: drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (sz == SIZE_MAX) { Change the type accordingly. Fixes: 20224d715a88 ("drm/msm/submit: Move copy_from_user ahead of locking bos") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210927113632.3849987-1-arnd@kernel.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-01drm/msm: One sched entity per process per priorityRob Clark3-21/+75
Some userspace apps make assumptions that rendering against multiple contexts within the same process (from the same thread, with appropriate MakeCurrent() calls) provides sufficient synchronization without any external synchronization (ie. glFenceSync()/glWaitSync()). Since a submitqueue maps to a gl/vk context, having multiple sched entities of the same priority only works with implicit sync enabled. To fix this, limit things to a single sched entity per priority level per process. An alternative would be sharing submitqueues between contexts in userspace, but tracking of per-context faults (ie. GL_EXT_robustness) is already done at the submitqueue level, so this is not an option. Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-01drm/msm: A bit more docs + cleanupRob Clark2-45/+57
msm_file_private is more gpu related, and in the next commit it will need access to other GPU specific #defines. While we're at it, add some comments. Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-01drm/msm/a6xx: Track current ctx by seqnoRob Clark4-4/+17
In theory a context can be destroyed and a new one allocated at the same address, making the pointer comparision to detect when we don't need to update the current pagetables invalid. Instead assign a sequence number to each context on creation, and use this for the check. Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-01drm/msm/a6xx: Serialize GMU communicationRob Clark3-6/+43
I've seen some crashes in our crash reporting that *look* like multiple threads stomping on each other while communicating with GMU. So wrap all those paths in a lock. Signed-off-by: Rob Clark <robdclark@chromium.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.