aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/nouveau/include/nvkm/engine (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-20drm/nouveau/gr/gf100-: expose method to determine current contextBen Skeggs1-0/+1
MMU will need access to this info. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-02-20drm/nouveau/gr/gf100-: expose fecs methods for pausing ctxswBen Skeggs1-0/+2
MMU will need access to these. v2. Apply fix from Rhys Kidd to send correct FECS method for STOP_CTXSW. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-02-20drm/nouveau/sec2/tu102-: instantiate SEC2 falconBen Skeggs1-0/+1
Required for ACR. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-02-20drm/nouveau/sec2: utilise engine PRI address from TOPBen Skeggs1-0/+2
Turing has its SEC2 instance in an alternate location, and this avoids needing to duplicate the code here for it. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-02-20drm/nouveau/nvdec/gp102-: utilise engine PRI address from TOPBen Skeggs1-0/+2
Turing has its NVDEC instances in an alternate location. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-02-20drm/nouveau/ce/tu102: rename implementation from tu104Ben Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-02-20drm/nouveau/fifo/tu102: rename implementation from tu104Ben Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-02-20drm/nouveau/disp/tu102: rename implementation from tu104Ben Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-12-11drm/nouveau/ce/tu104: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-12-11drm/nouveau/fifo/tu104: initial supportBen Skeggs1-0/+1
Various different bits and pieces vs GV100. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-12-11drm/nouveau/disp/tu104: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-05-18drm/nouveau/gr/gv100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-05-18drm/nouveau/ce/gv100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-05-18drm/nouveau/fifo/gv100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-05-18drm/nouveau/disp/gv100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-05-18drm/nouveau/dma/gv100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-05-18drm/nouveau/gr/gf100-: update r408840 where requiredBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-05-18drm/nouveau/fifo/gk104-: allow fault recovery code to be called by other subdevsBen Skeggs1-0/+2
This will be required to support Volta. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-11-15Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-3/+6
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman22-0/+22
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02drm/nouveau/fifo: initialise vmm with new interfacesBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-11-02drm/nouveau/mmu: handle instance block setupBen Skeggs1-2/+2
We previously required each VMM user to allocate their own page directory and fill in the instance block themselves. It makes more sense to handle this in a common location. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-11-02drm/nouveau/core/device: remove object include to prevent unnecessary rebuildsBen Skeggs3-0/+3
nvkm_device hasn't subclassed nvkm_object in a long time. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-06-16drm/nouveau/disp: fork off some new hw-specific implementationsBen Skeggs1-0/+2
Upcoming commits make supervisor handling share code between the NV50 and GF119 implementations. Because of this, and a few other cleanups, we need to allow some additional customisation. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-06-16drm/nouveau/disp: introduce input/output resource abstractionBen Skeggs1-0/+1
In order to properly support the SOR -> SOR + pad macro separation that occurred with GM20x GPUs, we need to separate OR handling out of the output path code. This will be used as the base to support ORs (DAC, SOR, PIOR). Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-06-16drm/nouveau/disp: introduce object to track per-head functions/stateBen Skeggs1-4/+1
Primarily intended as a way to pass per-head state around during supervisor handling, and share logic between NV50/GF119. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-06-16drm/nouveau/disp: delay output path / connector construction until oneinit()Ben Skeggs1-4/+4
This is to allow hw-specific code to instantiate output resources first, so we can cull unsupported output paths based on them. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-04-06drm/nouveau/gr/gp107: initial supportBen Skeggs1-0/+1
Forked from GP106 implementation. Differences: - 1 PPC/GPC - Slightly different grctx magics Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-04-06drm/nouveau/gr: support for GP10BAlexandre Courbot1-0/+1
GR is similar to GP100, with a few unavailable registers. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-04-06drm/nouveau/fifo: add GP10B supportAlexandre Courbot1-0/+1
GP10B's FIFO is similar to GP100's, but only allows 512 channels. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/gr/gp102: initial supportBen Skeggs1-0/+1
Differences from GP100: - 3 PPCs/GPC. - Another random reg to calculate/write. - Attrib CB setup a little different. - PascalB - PascalComputeB Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/secboot: add support for SEC LS firmwareAlexandre Courbot1-0/+1
Support running a message queue firmware on SEC. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/falcon: support for EMEMAlexandre Courbot1-0/+1
On SEC, DMEM is unaccessible by the CPU when the falcon is running in LS mode. This makes communication with the firmware using DMEM impossible. For this purpose, a new kind of memory (EMEM) has been added. It works similarly to DMEM, with the difference that its address space starts at 0x1000000. For this reason, it makes sense to treat it like a special case of DMEM. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/core: add SEC2 engineAlexandre Courbot1-0/+13
SEC2 is the name given by NVIDIA to the SEC engine post-Fermi (reasons unknown). Even though it shares the same address range as SEC, its usage is quite different and this justifies a new engine. Add this engine and make TOP use it all post-TOP devices should use this implementation and not the older SEC. Also quickly add the short gp102 implementation which will be used for falcon booting purposes. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/nvdec: add gp102 supportAlexandre Courbot1-0/+8
gp10x' secure boot requires a blob to be run on NVDEC. Expose the falcon through a dummy device. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/falcon: delay construction of falcons to oneinit()Alexandre Courbot1-0/+6
Reading registers at device construction time can be harmful, as there is no guarantee the underlying engine will be up, or in its runtime configuration. Defer register reading to the oneinit() hook and update users accordingly. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/falcon: protect against concurrent DMEM accessesAlexandre Courbot1-0/+1
The falcon library may be used concurrently, especially after the introduction of the msgqueue interface. Make it safe to use it that way. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-02-17drm/nouveau/fifo/gf100-: provide notification to user if channel is killedBen Skeggs1-0/+1
There are instances (such as non-recoverable GPU page faults) where NVKM decides that a channel's context is no longer viable, and will be removed from the runlist. This commit notifies the owner of the channel when this happens, so it has the opportunity to take some kind of recovery action instead of hanging. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-02-17drm/nouveau/dma: lookup objects with nvkm_object_search()Ben Skeggs1-5/+1
Custom code is no longer needed here. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-02-17drm/nouveau/core: add falcon library functionsAlexandre Courbot1-4/+72
Falcon processors are used in various places of GPU chips. Although there exist different versions of the falcon, and some variants exist, the base set of actions performed on them is the same, which results in lots of duplicated code. This patch consolidates the current nvkm_falcon structure and extends it with the following features: * Ability for an engine to obtain and later release a given falcon, * Abstractions for basic operations (IMEM/DMEM access, start, etc) * Abstractions for secure operations if a falcon is secure Abstractions make it easy to e.g. start a falcon, without having to care about its details. For instance, falcons in secure mode need to be started by writing to a different register. Right now the abstractions variants only cover secure vs. non-secure falcon, but more will come as e.g. SEC2 support is added. This is still a WIP as other functions previously done by engine/falcon.c need to be reimplemented. However this first step allows to keep things simple and to discuss basic design. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-11-17drm/nouveau/disp/gp102: rename from gp104Ben Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-11-17drm/nouveau/ce/gp102: rename from gp104Ben Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/ce/gp104: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/disp/gp104: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/gr/gp100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/ce/gp100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/fifo/gp100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/disp/gp100: initial supportBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-05-20drm/nouveau/core: remove pmc_enable argument from subdev ctorBen Skeggs2-2/+0
These are now specified directly in the MC subdev. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/ce/gm107: expose MaxwellDmaCopyABen Skeggs1-0/+1
The HW accepts KeplerDmaCopyA and MaxwellDmaCopyA classes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>