| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
All implementations return 0 and the return value of mipi_dsi_drv_remove()
is ignored anyhow.
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
|
|
Many DSI panel drivers fail to clean up their panel references on
mipi_dsi_attach() failure, so we're leaving a dangling drm_panel
reference to freed memory. Clean that up on failure.
Noticed by inspection, after seeing similar problems on other drivers.
Therefore, I'm not marking Fixes/stable.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.3.If9e74fa9b1d6eaa9e0e5b95b2b957b992740251c@changeid
|
|
The function "int drm_panel_add(struct drm_panel *panel)"
always returns 0, this return value is meaningless.
Also, there is no need to check return value which calls
"drm_panel_add and", error branch code will never run.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
|
|
Get rid of mode->vrefresh and just calculate it on demand. Saves
a bit of space and avoids the cached value getting out of sync
with reality.
Mostly done with cocci, with the following manual fixups:
- Remove the now empty loop in drm_helper_probe_single_connector_modes()
- Fix __MODE() macro in ch7006_mode.c
- Fix DRM_MODE_ARG() macro in drm_modes.h
- Remove leftover comment from samsung_s6d16d0_mode
- Drop the TODO
@@
@@
struct drm_display_mode {
...
- int vrefresh;
...
};
@@
identifier N;
expression E;
@@
struct drm_display_mode N = {
- .vrefresh = E
};
@@
identifier N;
expression E;
@@
struct drm_display_mode N[...] = {
...,
{
- .vrefresh = E
}
,...
};
@@
expression E;
@@
{
DRM_MODE(...),
- .vrefresh = E,
}
@@
identifier M, R;
@@
int drm_mode_vrefresh(const struct drm_display_mode *M)
{
...
- if (M->vrefresh > 0)
- R = M->vrefresh;
- else
if (...) {
...
}
...
}
@@
struct drm_display_mode *p;
expression E;
@@
(
- p->vrefresh = E;
|
- p->vrefresh
+ drm_mode_vrefresh(p)
)
@@
struct drm_display_mode s;
expression E;
@@
(
- s.vrefresh = E;
|
- s.vrefresh
+ drm_mode_vrefresh(&s)
)
@@
expression E;
@@
- drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E)
+ drm_mode_vrefresh(E)
@find_substruct@
identifier X;
identifier S;
@@
struct X {
...
struct drm_display_mode S;
...
};
@@
identifier find_substruct.S;
expression E;
identifier I;
@@
{
.S = {
- .vrefresh = E
}
}
@@
identifier find_substruct.S;
identifier find_substruct.X;
expression E;
identifier I;
@@
struct X I[...] = {
...,
.S = {
- .vrefresh = E
}
,...
};
v2: Drop TODO
v3: Rebase
v4: Rebase
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
|
|
The panel drivers used drm_panel.drm for two purposes:
1) Argument to drm_mode_duplicate()
2) drm->dev was used in error messages
The first usage is replaced with drm_connector.dev
- drm_connector is already connected to a drm_device
and we have a valid connector
The second usage is replaced with drm_panel.dev
- this makes drivers more consistent in their dev argument
used for dev_err() and friends
With these replacements there are no more uses of drm_panel.drm,
so it is removed from struct drm_panel.
With this change drm_panel_attach() and drm_panel_detach()
no longer have any use as they are empty functions.
v2:
- editorial correction in changelog (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
|
|
Today the bridge creates the drm_connector, but that is planned
to be moved to the display drivers.
To facilitate this, update drm_panel_funcs.get_modes() to
take drm_connector as an argument.
All panel drivers implementing get_modes() are updated.
v2:
- drop accidental change (Laurent)
- update docs for get_modes (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org
|
|
Add a type field to the drm_panel structure to report the panel type,
using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS,
eDP, DSI and DPI). This will be used to initialise the corresponding
connector type.
Update all panel drivers accordingly. The panel-simple driver only
specifies the type for the known to be LVDS panels, while all other
panels are left as unknown and will be converted on a case-by-case
basis as they all need to be carefully reviewed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
|
|
Instead of requiring all drivers to set the dev and funcs fields of
drm_panel manually after calling drm_panel_init(), pass the data as
arguments to the function. This simplifies the panel drivers, and will
help future refactoring when adding new arguments to drm_panel_init().
The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection to verify that no call to
drm_panel_init() with a single argument still exists.
@@
expression panel;
expression device;
identifier ops;
@@
drm_panel_init(&panel
+ , device, &ops
);
...
(
-panel.dev = device;
-panel.funcs = &ops;
|
-panel.funcs = &ops;
-panel.dev = device;
)
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com
|
|
Pull drm updates from Dave Airlie:
"The biggest thing in this is the AMD Navi GPU support, this again
contains a bunch of header files that are large. These are the new AMD
RX5700 GPUs that just recently became available.
New drivers:
- ST-Ericsson MCDE driver
- Ingenic JZ47xx SoC
UAPI change:
- HDR source metadata property
Core:
- HDR inforframes and EDID parsing
- drm hdmi infoframe unpacking
- remove prime sg_table caching into dma-buf
- New gem vram helpers to reduce driver code
- Lots of drmP.h removal
- reservation fencing fix
- documentation updates
- drm_fb_helper_connector removed
- mode name command handler rewrite
fbcon:
- Remove the fbcon notifiers
ttm:
- forward progress fixes
dma-buf:
- make mmap call optional
- debugfs refcount fixes
- dma-fence free with pending signals fix
- each dma-buf gets an inode
Panels:
- Lots of additional panel bindings
amdgpu:
- initial navi10 support
- avoid hw reset
- HDR metadata support
- new thermal sensors for vega asics
- RAS fixes
- use HMM rather than MMU notifier
- xgmi topology via kfd
- SR-IOV fixes
- driver reload fixes
- DC use a core bpc attribute
- Aux fixes for DC
- Bandwidth calc updates for DC
- Clock handling refactor
- kfd VEGAM support
vmwgfx:
- Coherent memory support changes
i915:
- HDR Support
- HDMI i2c link
- Icelake multi-segmented gamma support
- GuC firmware update
- Mule Creek Canyon PCH support for EHL
- EHL platform updtes
- move i915.alpha_support to i915.force_probe
- runtime PM refactoring
- VBT parsing refactoring
- DSI fixes
- struct mutex dependency reduction
- GEM code reorg
mali-dp:
- Komeda driver features
msm:
- dsi vs EPROBE_DEFER fixes
- msm8998 snapdragon 835 support
- a540 gpu support
- mdp5 and dpu interconnect support
exynos:
- drmP.h removal
tegra:
- misc fixes
tda998x:
- audio support improvements
- pixel repeated mode support
- quantisation range handling corrections
- HDMI vendor info fix
armada:
- interlace support fix
- overlay/video plane register handling refactor
- add gamma support
rockchip:
- RX3328 support
panfrost:
- expose perf counters via hidden ioctls
vkms:
- enumerate CRC sources list
ast:
- rework BO handling
mgag200:
- rework BO handling
dw-hdmi:
- suspend/resume support
rcar-du:
- R8A774A1 Soc Support
- LVDS dual-link mode support
- Additional formats
- Misc fixes
omapdrm:
- DSI command mode display support
stm
- fb modifier support
- runtime PM support
sun4i:
- use vmap ops
vc4:
- binner bo binding rework
v3d:
- compute shader support
- resync/sync fixes
- job management refactoring
lima:
- NULL pointer in irq handler fix
- scheduler default timeout
virtio:
- fence seqno support
- trace events
bochs:
- misc fixes
tc458767:
- IRQ/HDP handling
sii902x:
- HDMI audio support
atmel-hlcdc:
- misc fixes
meson:
- zpos support"
* tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits)
Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
Revert "mm: adjust apply_to_pfn_range interface for dropped token."
mm: adjust apply_to_pfn_range interface for dropped token.
drm/amdgpu/navi10: add uclk activity sensor
drm/amdgpu: properly guard the generic discovery code
drm/amdgpu: add missing documentation on new module parameters
drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
drm/amd/display: avoid 64-bit division
drm/amdgpu/psp11: simplify the ucode register logic
drm/amdgpu: properly guard DC support in navi code
drm/amd/powerplay: vega20: fix uninitialized variable use
drm/amd/display: dcn20: include linux/delay.h
amdgpu: make pmu support optional
drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent
drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq
drm/amd/powerplay: Use memset to initialize metrics structs
drm/amdgpu/mes10.1: Fix header guard
drm/amd/powerplay: add temperature sensor support for navi10
drm/amdgpu: fix scheduler timeout calc
drm/amdgpu: Prepare for hmm_range_register API change (v2)
...
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop use of the deprecated drmP.h header file.
While touching the list of include files:
- Divide include files in blocks of linux/* video/* drm/* etc.
Be consistent in the order of the blocks
- Sort individual blocks of include files
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190526180532.1641-3-sam@ravnborg.org
|
|
Remove all drm_panel_detach() calls from all panel drivers and update
the kerneldoc for drm_panel_detach().
Setting the connector and drm to NULL when the DRM panel device is going
away hardly serves any purpose. Usually the whole memory structure is
freed right after the remove call. However, calling the detach function
from the master DRM device, and setting the connector pointer to NULL,
has the logic of marking the panel again as available for another DRM
master to attach. The usual situation would be the same DRM master
device binding again.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com
|
|
Use backlight_enable/disable helpers instead of changing
the property and calling backlight_update_status for cleaner
and simpler code and also to avoid repetitions.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/bc80cdb5cf1a6638dce9fb9f8da674e361e3b749.1516810725.git.meghana.madhyastha@gmail.com
|
|
Add support for the JDI LT070ME05000 WUXGA DSI panel used in
Nexus 7 2013 devices.
Programming sequence for the panel is was originally found in the
android-msm-flo-3.4-lollipop-release branch from:
https://android.googlesource.com/kernel/msm.git
And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi
file in:
git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27
Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
Uwe Kleine-König
Brian Norris
Bernard Zhao
Ville Syrjälä
Sam Ravnborg
Laurent Pinchart
Linus Torvalds
Thomas Gleixner
Jyri Sarha
Meghana Madhyastha
Vinay Simha BN