aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/radeon_acpi.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2014-03-13ipv6: Avoid unnecessary temporary addresses being generatedHeiner Kallweit1-1/+4
tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore age needs to be added to the condition. Age calculation in ipv6_create_tempaddr is different from the one in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS. This can cause age in ipv6_create_tempaddr to be less than the one in addrconf_verify and therefore unnecessary temporary address to be generated. Use age calculation as in addrconf_modify to avoid this. Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13eth: fec: Fix lost promiscuous mode after reconnecting cableStefan Wahren1-7/+7
If the Freescale fec is in promiscuous mode and network cable is reconnected then the promiscuous mode get lost. The problem is caused by a too soon call of set_multicast_list to re-enable promisc mode. The FEC_R_CNTRL register changes are overwritten by fec_restart. This patch fixes this by moving the call behind the init of FEC_R_CNTRL register in fec_restart. Successful tested on a i.MX28 board. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13bonding: set correct vlan id for alb xmit pathdingtianhong1-1/+1
The commit d3ab3ffd1d728d7ee77340e7e7e2c7cfe6a4013e (bonding: use rlb_client_info->vlan_id instead of ->tag) remove the rlb_client_info->tag, but occur some issues, The vlan_get_tag() will return 0 for success and -EINVAL for error, so the client_info->vlan_id always be set to 0 if the vlan_get_tag return 0 for success, so the client_info would never get a correct vlan id. We should only set the vlan id to 0 when the vlan_get_tag return error. Fixes: d3ab3ffd1d7 (bonding: use rlb_client_info->vlan_id instead of ->tag) CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13at86rf230: fix lockdep splatsAlexander Aring1-5/+6
This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13net/mlx4_en: Deregister multicast vxlan steering rules when going downOr Gerlitz1-0/+2
When mlx4_en_stop_port() is called, we need to deregister also the tunnel steering rules that relate to multicast. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13vmxnet3: fix building without CONFIG_PCI_MSIArnd Bergmann1-2/+5
Since commit d25f06ea466e "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13MAINTAINERS: add networking selftests to NETWORKINGDaniel Borkmann1-0/+1
Add it to NETWORKING [GENERAL] to make sure patches for selftests go to the netdev list as well. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13drm/vmwgfx: Fix a surface reference corner-case in legacy emulation modeThomas Hellstrom1-0/+18
If running on a gb-object capable device with a non-gb capable surface exporter (X server) and a gb capable surface referencing client (GL driver), the referencing client expects to find a shareable backing buffer attached to the surface at reference time. This may not be the case if the surface has not yet been validated. This would cause the surface reference IOCTL to return an error. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2014-03-12net: socket: error on a negative msg_namelenMatthew Leach1-0/+4
When copying in a struct msghdr from the user, if the user has set the msg_namelen parameter to a negative value it gets clamped to a valid size due to a comparison between signed and unsigned values. Ensure the syscall errors when the user passes in a negative value. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12drm/radeon/cik: properly set compute ring status on disableAlex Deucher1-1/+4
When we disable the rings, set the status properly. If not other code pathes may try and use the rings which are not functional at this point. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-12MAINTAINERS: Add tools/net to NETWORKING [GENERAL]Tobias Klauser1-0/+1
Make sure patches for these tools go to the netdev list as well. References: https://marc.info/?l=linux-kernel&m=139450284501328&w=2 Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12packet: doc: Spelling s/than/that/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12net/mlx4_core: Load the IB driver when the device supports IBoEOr Gerlitz1-1/+1
When checking what protocol drivers to load, the IB driver should be requested also over Ethernet ports, if the device supports IBoE (RoCE). Fixes: b046ffe 'net/mlx4_core: Load higher level modules according to ports type' Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12net/mlx4_en: Handle vxlan steering rules for mac address changesOr Gerlitz1-0/+8
When the device mac address is changed, we must deregister the vxlan steering rule associated with the previous mac, and register a new steering rule using the new mac. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12net/mlx4_core: Fix wrong dump of the vxlan offloads device capabilityOr Gerlitz1-2/+3
Fix the value used to dump the vxlan offloads device capability to align with the MLX4_DEV_CAP_FLAG2_yyy definition. While on that, add dump to the IPoIB flow-steering device capability and fix small typo. The vxlan cap value wasn't fully handled when a conflict was resolved between MLX4_DEV_CAP_FLAG2_DMFS_IPOIB coming from the IB tree to MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS coming from net-next. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12drm/radeon/cik: stop the sdma engines in the enable() functionAlex Deucher1-7/+5
We always stop the rings when disabling the engines so just call the stop functions directly from the sdma enable function. This way the rings' status is set correctly on suspend so there are no problems on resume. Fixes resume failures that result in acceleration getting disabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-12drm/radeon/cik: properly set sdma ring status on disableAlex Deucher1-0/+2
When we disable the rings, set the status properly. If not other code pathes may try and use the rings which are not functional at this point. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-12drm/radeon: fix runpm disabling on non-PX harderAlex Deucher1-1/+9
Make sure runtime pm is disabled on non-PX hardware. Should fix powerdown problems without displays attached. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-12xen-netback: use skb_is_gso in xenvif_start_xmitWei Liu1-2/+1
In 5bd076708 ("Xen-netback: Fix issue caused by using gso_type wrongly") we use skb_is_gso to determine if we need an extra slot to accommodate the SKB. There's similar error in interface.c. Change that to use skb_is_gso as well. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Annie Li <annie.li@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Paul Durrant <paul.durrant@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12drm/ttm: don't oops if no invalidate_caches()Rob Clark1-3/+5
A few of the simpler TTM drivers (cirrus, ast, mgag200) do not implement this function. Yet can end up somehow with an evicted bo: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 16e761067 PUD 16e6cf067 PMD 0 Oops: 0010 [#1] SMP Modules linked in: bnep bluetooth rfkill fuse ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables sg btrfs zlib_deflate raid6_pq xor dm_queue_length iTCO_wdt iTCO_vendor_support coretemp kvm dcdbas dm_service_time microcode serio_raw pcspkr lpc_ich mfd_core i7core_edac edac_core ses enclosure ipmi_si ipmi_msghandler shpchp acpi_power_meter mperf nfsd auth_rpcgss nfs_acl lockd uinput sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sr_mod cdrom sd_mod usb_storage mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit lpfc drm_kms_helper ttm crc32c_intel ata_piix bfa drm ixgbe libata i2c_core mdio crc_t10dif ptp crct10dif_common pps_core scsi_transport_fc dca scsi_tgt megaraid_sas bnx2 dm_mirror dm_region_hash dm_log dm_mod CPU: 16 PID: 2572 Comm: X Not tainted 3.10.0-86.el7.x86_64 #1 Hardware name: Dell Inc. PowerEdge R810/0H235N, BIOS 0.3.0 11/14/2009 task: ffff8801799dabc0 ti: ffff88016c884000 task.ti: ffff88016c884000 RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff88016c885ad8 EFLAGS: 00010202 RAX: ffffffffa04e94c0 RBX: ffff880178937a20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000240004 RDI: ffff880178937a00 RBP: ffff88016c885b60 R08: 00000000000171a0 R09: ffff88007cf171a0 R10: ffffea0005842540 R11: ffffffff810487b9 R12: ffff880178937b30 R13: ffff880178937a00 R14: ffff88016c885b78 R15: ffff880179929400 FS: 00007f81ba2ef980(0000) GS:ffff88007cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000016e763000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0306fae ffff8801799295c0 0000000000260004 0000000000000001 ffff88016c885b60 ffffffffa0307669 00ff88007cf17738 ffff88017cf17700 ffff880178937a00 ffff880100000000 ffff880100000000 0000000079929400 Call Trace: [<ffffffffa0306fae>] ? ttm_bo_handle_move_mem+0x54e/0x5b0 [ttm] [<ffffffffa0307669>] ? ttm_bo_mem_space+0x169/0x340 [ttm] [<ffffffffa0307bd7>] ttm_bo_move_buffer+0x117/0x130 [ttm] [<ffffffff81130001>] ? perf_event_init_context+0x141/0x220 [<ffffffffa0307cb1>] ttm_bo_validate+0xc1/0x130 [ttm] [<ffffffffa04e7377>] mgag200_bo_pin+0x87/0xc0 [mgag200] [<ffffffffa04e56c4>] mga_crtc_cursor_set+0x474/0xbb0 [mgag200] [<ffffffff811971d2>] ? __mem_cgroup_commit_charge+0x152/0x3b0 [<ffffffff815c4182>] ? mutex_lock+0x12/0x2f [<ffffffffa0201433>] drm_mode_cursor_common+0x123/0x170 [drm] [<ffffffffa0205231>] drm_mode_cursor_ioctl+0x41/0x50 [drm] [<ffffffffa01f5ca2>] drm_ioctl+0x502/0x630 [drm] [<ffffffff815cbab4>] ? __do_page_fault+0x1f4/0x510 [<ffffffff8101cb68>] ? __restore_xstate_sig+0x218/0x4f0 [<ffffffff811b4445>] do_vfs_ioctl+0x2e5/0x4d0 [<ffffffff8124488e>] ? file_has_perm+0x8e/0xa0 [<ffffffff811b46b1>] SyS_ioctl+0x81/0xa0 [<ffffffff815d05d9>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff88016c885ad8> CR2: 0000000000000000 Signed-off-by: Rob Clark <rclark@redhat.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org
2014-03-12KVM: SVM: fix cr8 intercept windowRadim Krčmář1-3/+3
We always disable cr8 intercept in its handler, but only re-enable it if handling KVM_REQ_EVENT, so there can be a window where we do not intercept cr8 writes, which allows an interrupt to disrupt a higher priority task. Fix this by disabling intercepts in the same function that re-enables them when needed. This fixes BSOD in Windows 2008. Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-12PCI: Don't check resource_size() in pci_bus_alloc_resource()Bjorn Helgaas1-2/+0
Paul reported that after f75b99d5a77d ("PCI: Enforce bus address limits in resource allocation") on a 32-bit kernel (CONFIG_PHYS_ADDR_T_64BIT not set), intel-gtt complained "can't ioremap flush page - no chipset flushing". In addition, other PCI resource allocations, e.g., for bridge windows, failed. This happens because we incorrectly skip bus resources of [mem 0x00000000-0xffffffff] because we think they are of size zero. When resource_size_t is 32 bits wide, resource_size() on [mem 0x00000000-0xffffffff] returns 0 because (r->end - r->start + 1) overflows. Therefore, we can't use "resource_size() == 0" to decide that allocation from this resource will fail. allocate_resource() should fail anyway if it can't satisfy the address constraints, so we should just depend on that. A [mem 0x00000000-0xffffffff] bus resource is obviously not really valid, but we do fall back to it as a default when we don't have information about host bridge apertures. Link: https://bugzilla.kernel.org/show_bug.cgi?id=71611 Fixes: f75b99d5a77d PCI: Enforce bus address limits in resource allocation Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-03-12PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabledBjorn Helgaas1-0/+3
Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691 Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-12drm/ttm: Work around performance regression with VM_PFNMAPThomas Hellstrom1-5/+7
A performance regression was introduced in TTM in linux 3.13 when we started using VM_PFNMAP for shared mappings. In theory this should've been faster due to less page book-keeping but it appears like VM_PFNMAP + x86 PAT + write-combine is a particularly cpu-hungry combination, as seen by largely increased cpu-usage on r200 GL video playback. Until we've sorted out why, revert to always use VM_MIXEDMAP. Reference: freedesktop.org bugzilla bug #75719 Reported-and-tested-by: <smoki00790@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org
2014-03-12r8169: fix the incorrect tx descriptor versionhayeswang1-1/+1
The tx descriptor version of RTL8111B belong to RTL_TD_0. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tools/net/Makefile: Define PACKAGE to fix build problemsMarkos Chandras1-1/+1
Fixes the following build problem with binutils-2.24 gcc -Wall -O2 -c -o bpf_jit_disasm.o bpf_jit_disasm.c In file included from bpf_jit_disasm.c:25:0: /usr/include/bfd.h:35:2: error: #error config.h must be included before this header #error config.h must be included before this header This is similar to commit 3ce711a6abc27abce1554e1d671a8762b7187690 "perf tools: bfd.h/libbfd detection fails with recent binutils" See: https://sourceware.org/bugzilla/show_bug.cgi?id=14243 CC: David S. Miller <davem@davemloft.net> CC: Daniel Borkmann <dborkman@redhat.com> CC: netdev@vger.kernel.org Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11x86: bpf_jit: support negative offsetsAlexei Starovoitov1-1/+1
Commit a998d4342337 claimed to introduce negative offset support to x86 jit, but it couldn't be working, since at the time of the execution of LD+ABS or LD+IND instructions via call into bpf_internal_load_pointer_neg_helper() the %edx (3rd argument of this func) had junk value instead of access size in bytes (1 or 2 or 4). Store size into %edx instead of %ecx (what original commit intended to do) Fixes: a998d4342337 ("bpf jit: Let the x86 jit handle negative offsets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Jan Seiffert <kaffeemonster@googlemail.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11bridge: multicast: enable snooping on general queries onlyLinus Lüssing1-3/+5
Without this check someone could easily create a denial of service by injecting multicast-specific queries to enable the bridge snooping part if no real querier issuing periodic general queries is present on the link which would result in the bridge wrongly shutting down ports for multicast traffic as the bridge did not learn about these listeners. With this patch the snooping code is enabled upon receiving valid, general queries only. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11bridge: multicast: add sanity check for general query destinationLinus Lüssing1-0/+19
General IGMP and MLD queries are supposed to have the multicast link-local all-nodes address as their destination according to RFC2236 section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810 section 5.1.15. Without this check, such malformed IGMP/MLD queries can result in a denial of service: The queries are ignored by most IGMP/MLD listeners therefore they will not respond with an IGMP/MLD report. However, without this patch these malformed MLD queries would enable the snooping part in the bridge code, potentially shutting down the according ports towards these hosts for multicast traffic as the bridge did not learn about these listeners. Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11tcp: tcp_release_cb() should release socket ownershipEric Dumazet3-1/+20
Lars Persson reported following deadlock : -000 |M:0x0:0x802B6AF8(asm) <-- arch_spin_lock -001 |tcp_v4_rcv(skb = 0x8BD527A0) <-- sk = 0x8BE6B2A0 -002 |ip_local_deliver_finish(skb = 0x8BD527A0) -003 |__netif_receive_skb_core(skb = 0x8BD527A0, ?) -004 |netif_receive_skb(skb = 0x8BD527A0) -005 |elk_poll(napi = 0x8C770500, budget = 64) -006 |net_rx_action(?) -007 |__do_softirq() -008 |do_softirq() -009 |local_bh_enable() -010 |tcp_rcv_established(sk = 0x8BE6B2A0, skb = 0x87D3A9E0, th = 0x814EBE14, ?) -011 |tcp_v4_do_rcv(sk = 0x8BE6B2A0, skb = 0x87D3A9E0) -012 |tcp_delack_timer_handler(sk = 0x8BE6B2A0) -013 |tcp_release_cb(sk = 0x8BE6B2A0) -014 |release_sock(sk = 0x8BE6B2A0) -015 |tcp_sendmsg(?, sk = 0x8BE6B2A0, ?, ?) -016 |sock_sendmsg(sock = 0x8518C4C0, msg = 0x87D8DAA8, size = 4096) -017 |kernel_sendmsg(?, ?, ?, ?, size = 4096) -018 |smb_send_kvec() -019 |smb_send_rqst(server = 0x87C4D400, rqst = 0x87D8DBA0) -020 |cifs_call_async() -021 |cifs_async_writev(wdata = 0x87FD6580) -022 |cifs_writepages(mapping = 0x852096E4, wbc = 0x87D8DC88) -023 |__writeback_single_inode(inode = 0x852095D0, wbc = 0x87D8DC88) -024 |writeback_sb_inodes(sb = 0x87D6D800, wb = 0x87E4A9C0, work = 0x87D8DD88) -025 |__writeback_inodes_wb(wb = 0x87E4A9C0, work = 0x87D8DD88) -026 |wb_writeback(wb = 0x87E4A9C0, work = 0x87D8DD88) -027 |wb_do_writeback(wb = 0x87E4A9C0, force_wait = 0) -028 |bdi_writeback_workfn(work = 0x87E4A9CC) -029 |process_one_work(worker = 0x8B045880, work = 0x87E4A9CC) -030 |worker_thread(__worker = 0x8B045880) -031 |kthread(_create = 0x87CADD90) -032 |ret_from_kernel_thread(asm) Bug occurs because __tcp_checksum_complete_user() enables BH, assuming it is running from softirq context. Lars trace involved a NIC without RX checksum support but other points are problematic as well, like the prequeue stuff. Problem is triggered by a timer, that found socket being owned by user. tcp_release_cb() should call tcp_write_timer_handler() or tcp_delack_timer_handler() in the appropriate context : BH disabled and socket lock held, but 'owned' field cleared, as if they were running from timer handlers. Fixes: 6f458dfb4092 ("tcp: improve latencies of timer triggered events") Reported-by: Lars Persson <lars.persson@axis.com> Tested-by: Lars Persson <lars.persson@axis.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11skbuff: skb_segment: orphan frags before copyingMichael S. Tsirkin1-0/+6
skb_segment copies frags around, so we need to copy them carefully to avoid accessing user memory after reporting completion to userspace through a callback. skb_segment doesn't normally happen on datapath: TSO needs to be disabled - so disabling zero copy in this case does not look like a big deal. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11skbuff: skb_segment: s/fskb/list_skb/Michael S. Tsirkin1-13/+13
fskb is unrelated to frag: it's coming from frag_list. Rename it list_skb to avoid confusion. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11skbuff: skb_segment: s/skb/head_skb/Michael S. Tsirkin1-22/+24
rename local variable to make it easier to tell at a glance that we are dealing with a head skb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11skbuff: skb_segment: s/skb_frag/frag/Michael S. Tsirkin1-7/+7
skb_frag can in fact point at either skb or fskb so rename it generally "frag". Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11skbuff: skb_segment: s/frag/nskb_frag/Michael S. Tsirkin1-9/+9
frag points at nskb, so name it appropriately Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11stmmac: dwmac-sti: fix broken STiD127 compatibilityGiuseppe CAVALLARO1-1/+1
This is to fix the compatibility to the STiD127 SoC. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11stmmac: fix chained modeGiuseppe CAVALLARO4-53/+34
This patch is to fix the chain mode that was broken and generated a panic. This patch reviews the chain/ring modes now shaing the same structure and taking care about the pointers and callbacks. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11stmmac: fix and better tune the default buffer sizesGiuseppe CAVALLARO1-6/+6
This patch is to fix and tune the default buffer sizes. It reduces the default bufsize used by the driver from 4KiB to 1536 bytes. Patch has been tested on both ARM and SH4 platform based. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11stmmac: disable at run-time the EEE if not supportedGiuseppe CAVALLARO1-4/+19
This patch is to disable the EEE (so HW and timers) for example when the phy communicates that the EEE can be supported anymore. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11vmxnet3: fix netpoll race conditionNeil Horman1-5/+11
vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> CC: stable@vger.kernel.org Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11x86: Remove CONFIG_X86_OOSTOREDave Jones6-290/+5
This was an optimization that made memcpy type benchmarks a little faster on ancient (Circa 1998) IDT Winchip CPUs. In real-life workloads, it wasn't even noticable, and I doubt anyone is running benchmarks on 16 year old silicon any more. Given this code has likely seen very little use over the last decade, let's just remove it. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10vlan: Set correct source MAC address with TX VLAN offload enabledPeter Boström1-0/+3
With TX VLAN offload enabled the source MAC address for frames sent using the VLAN interface is currently set to the address of the real interface. This is wrong since the VLAN interface may be configured with a different address. The bug was introduced in commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ("vlan: Fix header ops passthru when doing TX VLAN offload."). This patch sets the source address before calling the create function of the real interface. Signed-off-by: Peter Boström <peter.bostrom@netrounds.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-10Xen-netback: Fix issue caused by using gso_type wronglyAnnie Li1-21/+18
Current netback uses gso_type to check whether the skb contains gso offload, and this is wrong. Gso_size is the right one to check gso existence, and gso_type is only used to check gso type. Some skbs contains nonzero gso_type and zero gso_size, current netback would treat these skbs as gso and create wrong response for this. This also causes ssh failure to domu from other server. V2: use skb_is_gso function as Paul Durrant suggested Signed-off-by: Annie Li <annie.li@oracle.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-10cris: convert ffs from an object-like macro to a function-like macroGeert Uytterhoeven1-1/+1
This avoids bad interactions with code using identifiers called "ffs": drivers/usb/gadget/f_fs.c: In function 'ffsmod_init': drivers/usb/gadget/f_fs.c:2693:494: error: 'ffsusb_func' undeclared (first use in this function) drivers/usb/gadget/f_fs.c:2693:494: note: each undeclared identifier is reported only once for each function it appears in drivers/usb/gadget/f_fs.c: In function 'ffsmod_exit': drivers/usb/gadget/f_fs.c:2693:677: error: 'ffsusb_func' undeclared (first use in this function) drivers/usb/gadget/f_fs.c: At top level: drivers/usb/gadget/f_fs.c:2693:35: warning: 'kernel_ffsusb_func' defined but not used [-Wunused-variable] drivers/usb/gadget/f_fs.c: In function 'ffsmod_init': drivers/usb/gadget/f_fs.c:2693:15: warning: control reaches end of non-void function [-Wreturn-type] See http://kisskb.ellerman.id.au/kisskb/buildresult/10715817/ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10hfsplus: add HFSX subfolder count supportSergei Antonov4-2/+55
Adds support for HFSX 'HasFolderCount' flag and a corresponding 'folderCount' field in folder records. (For reference see HFS_FOLDERCOUNT and kHFSHasFolderCountBit/kHFSHasFolderCountMask in Apple's source code.) Ignoring subfolder count leads to fs errors found by Mac: ... Checking catalog hierarchy. HasFolderCount flag needs to be set (id = 105) (It should be 0x10 instead of 0) Incorrect folder count in a directory (id = 2) (It should be 7 instead of 6) ... Steps to reproduce: Format with "newfs_hfs -s /dev/diskXXX". Mount in Linux. Create a new directory in root. Unmount. Run "fsck_hfs /dev/diskXXX". The patch handles directory creation, deletion, and rename. Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10tools/testing/selftests/ipc/msgque.c: handle msgget failure return correctlyColin Ian King1-0/+1
A failed msgget causes the test to return an uninitialised value in ret. Assign ret to -errno on error exit. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10MAINTAINERS: blackfin: add git repositoryMichael Opdenacker1-0/+1
Add the git repository currently in use for blackfin architecture development. This information was obtained from Steven Miao. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Cc: Steven Miao <realmz6@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10revert "kallsyms: fix absolute addresses for kASLR"Andrew Morton1-1/+2
Revert the recently applied 0f55159d091c ("kallsyms: fix absolute addresses for kASLR"). Kees said : This got NAKed, please don't apply -- this patch works for x86 and : ARM, but may cause problems for others: : : https://lkml.org/lkml/2014/2/24/718 It appears that Kees will be fixing all this up for 3.15. Cc: Andy Honig <ahonig@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10mm/Kconfig: fix URL for zsmalloc benchmarkBen Hutchings1-2/+2
The help text for CONFIG_PGTABLE_MAPPING has an incorrect URL. While we're at it, remove the unnecessary footnote notation. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10fs/proc/base.c: fix GPF in /proc/$PID/map_filesArtem Fetishev1-0/+1
The expected logic of proc_map_files_get_link() is either to return 0 and initialize 'path' or return an error and leave 'path' uninitialized. By the time dname_to_vma_addr() returns 0 the corresponding vma may have already be gone. In this case the path is not initialized but the return value is still 0. This results in 'general protection fault' inside d_path(). Steps to reproduce: CONFIG_CHECKPOINT_RESTORE=y fd = open(...); while (1) { mmap(fd, ...); munmap(fd, ...); } ls -la /proc/$PID/map_files Addresses https://bugzilla.kernel.org/show_bug.cgi?id=68991 Signed-off-by: Artem Fetishev <artem_fetishev@epam.com> Signed-off-by: Aleksandr Terekhov <aleksandr_terekhov@epam.com> Reported-by: <wiebittewas@gmail.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.