aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon
AgeCommit message (Collapse)AuthorFilesLines
2010-08-12drm/radeon: Fix pci_map_page() error checkingBenjamin Herrenschmidt2-2/+3
0 is a valid DMA address from pci_map_page(), use pci_dma_mapping_error() instead to check for errors [airlied: fix warning + two other places with errors.] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12drm/radeon/kms: allow FG_ALPHA_VALUE on r5xxMarek Olšák1-0/+1
This is a CS checker fix. I need this for FP16 alpha-test. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12drm/radeon/kms: another r6xx/r7xx CS checker fixAlex Deucher1-0/+1
add default case for buffer formats Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Andre Maasikas <amaasikas@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-11Merge branch 'master' into for-nextJiri Kosina1-1/+1
Conflicts: fs/exofs/inode.c
2010-08-10vt/console: try harder to print output when panicingJesse Barnes1-1/+1
Jesse's initial patch commit said: "At panic time (i.e. when oops_in_progress is set) we should try a bit harder to update the screen and make sure output gets to the VT, since some drivers are capable of flipping back to it. So make sure we try to unblank and update the display if called from a panic context." I've enhanced this to add a flag to the vc that console layer can set to indicate they want this behaviour to occur. This also adds support to fbcon for that flag and adds an fb flag for drivers to indicate they want to use the support. It enables this for KMS drivers. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10Merge branch 'master' into for-nextJiri Kosina51-1195/+1527
Conflicts: arch/arm/mach-omap1/board-nokia770.c
2010-08-10drm: expand gamma_setJames Simmons1-7/+3
Expand the crtc_gamma_set function to accept a starting offset. The reason for this is to eventually use this function for setcolreg from drm_fb_helper.c. The fbdev colormap function can start at any offset in the color map. Signed-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm: Use ENOENT consistently for the error return for an unmatched handle.Chris Wilson3-8/+8
This is consistent with trying to access a filename that not exist within a directory which is a good analogy here. The main reason for the change is that it is easy to confuse the error code of EBADF as an performing an ioctl on an invalid file descriptor (rather than an unknown object). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: mark 3D power states as performanceAlex Deucher1-0/+5
Fixes lack of power saving with multiple heads on some desktop cards. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16474 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: add additional quirk for Acer rv620 laptopAlex Deucher1-2/+12
HPD pins are reversed Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29387 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm: Propagate error code from fb_create()Chris Wilson1-4/+3
Change the interface to expect a PTR_ERR specifing the real error code as opposed to assuming a NULL return => -EINVAL. Just once the user may not be at fault! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10radeon: handle errors in radeon_hwmon_init()Dan Carpenter1-5/+19
Smatch complained that the ERR_PTR from hwmon_device_register() wasn't handled.  I added some error handling in radeon_hwmon_init() to silence the warning. Unfortunately errors from radeon_pm_init() aren't handled so this doesn't really make a difference beyond silencing the warning. Also I changed DRM_ERROR() to dev_err() which is the new preferred method. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: add support for router objectsAlex Deucher5-15/+147
router objects are found on systems that use a mux to control ddc line to connector routing or to control the actual clock and data routing from the chip to the connectors. This patch implements ddc line routing. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: rework combios i2c handlingAlex Deucher1-247/+168
Handle asic specific table to hw mappings in combios_setup_i2c_bus() directly. This allows us to remove most of the combios quirks and clean up the i2c bus setup. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: unify i2c handlingAlex Deucher7-32/+214
Previously we added i2c buses as needed when enumerating connectors power management, etc. This only exposed the actual buses used and could have lead to the same buse getting created more than once if one buses was used for more than one purpose. This patch sets up all i2c buses on the card in one place and users of the buses just point back to the one instance. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: r600 CS parser fixesAlex Deucher1-12/+15
- buffer offsets in the base regs are 256b aligned so shift properly when comparing, fixed by Andre Maasikas - mipmap size was calculated wrong when nlevel=0 - texture bo offsets were used after the bo base address was added - vertex resource size register is size - 1, not size Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Andre Maasikas <amaasikas@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon: add a way to revoke hyper-z accessMarek Olšák1-5/+19
Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: add missing copy from userDr. David Alan Gilbert1-1/+3
This hasn't mattered up until the ioctl started using the value, and it fell apart. fixes fd.o 29340, Ubuntu LP 606081 [airlied: cleaned up whitespace and don't need an error before pushing] Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-09fix printk typo 'faild'Paul Bolle1-1/+1
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-05drm/radeon/kms: only expose underscan on avivo chipsAlex Deucher2-11/+16
R4xx also uses the atom add connector function, but underscan is only supported on avivo chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-04drm/radeon: tone down overchatty acpi debug messages.Dave Airlie2-2/+2
On non laptop systems we'll see these the whole time, so make them less important. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-04drm/radeon/kms: enable underscan option for digital connectorsAlex Deucher5-25/+98
This connector attribute allows you to enable or disable underscan on a digital output to compensate for panels that automatically overscan (e.g., many HDMI TVs). Valid values for the attribute are: off - forces underscan off on - forces underscan on auto - enables underscan if an HDMI TV is connected, off otherwise default value is auto. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-04drm/radeon/kms: fix calculation of h/v scaling factorsAlex Deucher1-7/+13
Prior to this patch the code was dividing the src_v by the dst_h and vice versa, rather than src_v/dst_v and src_h/dst_h. This could lead to problems in the calculation of the display watermarks. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-04Merge remote branch 'intel/drm-intel-next' of /ssd/git/drm-next into drm-core-nextDave Airlie1-0/+1
* 'intel/drm-intel-next' of /ssd/git/drm-next: (230 commits) drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it. drm/agp/i915: trim stolen space to 32M drm/i915: Unset cursor if out-of-bounds upon mode change (v4) drm/i915: Unreference object not handle on creation drm/i915: Attempt to uncouple object after catastrophic failure in unbind drm/i915: Repeat unbinding during free if interrupted (v6) drm/i915: Refactor i915_gem_retire_requests() drm/i915: Warn if we run out of FIFO space for a mode drm/i915: Round up the watermark entries (v3) drm/i915: Typo in (unused) register mask for overlay. drm/i915: Check overlay stride errata for i830 and i845 drm/i915: Validate the mode for eDP by using fixed panel size drm/i915: Always use the fixed panel timing for eDP drm/i915: Enable panel fitting for eDP drm/i915: Add fixed panel mode parsed from EDID for eDP without fixed mode in VBT drm/i915/sdvo: Set sync polarity based on actual mode drm/i915/hdmi: Set sync polarity based on actual mode drm/i915/pch: Set transcoder sync polarity for DP based on actual mode drm/i915: Initialize LVDS and eDP outputs before anything else drm/i915/dp: Correctly report eDP in the core connector type ...
2010-08-04drm/radeon/kms/igp: sideport is AMD onlyAlex Deucher4-11/+11
Intel variants don't support it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-04drm/radeon/kms: handle the case of no active displays properly in the bandwidth codeAlex Deucher2-32/+18
Logic was: if (mode0 && mode1) else if (mode0) else Should be: if (mode0 && mode1) else if (mode0) else if (mode1) Otherwise we may end up calculating the priority regs with unitialized values. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16492 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-04drm: move ttm global code to core drmDave Airlie2-11/+11
I wrote this for the prime sharing work, but I also noticed other external non-upstream drivers from a large company carrying a similiar patch, so I may as well ship it in master. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: make sure HPD is set to NONE on analog-only connectorsAlex Deucher1-2/+14
HPD is digital only. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: make sure rio_mem is valid before unmapping itAlex Deucher1-1/+2
If we were not able to map the io bar in device init, don't attempt to unmap it in device fini. All radeons should have a io bar, so I doubt this would ever trigger, but just to be on the safe side... Pointed out by: Alberto Milone <alberto.milone@canonical.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-01Merge remote branch 'origin/master' into drm-intel-nextEric Anholt1-0/+1
This resolves the conflict in the EDP code, which has been rather popular to hack on recently. Conflicts: drivers/gpu/drm/i915/intel_dp.c
2010-08-02drm/radeon: add basic zmask/hiz support (v4)Dave Airlie11-57/+66
This interface allows userspace to request hyperz support, it probably needs more locking, and really reporting that you can have hyperz is racy since someone else might get it before you do. v2: modify so we pass 0 valued packets to let DDX/r300c keep working. also fixed incorrect 0x4f1c reference. v3: fixup zb_bw_cntl so older drivers keep working v4: add locking, fixup SC_HYPERZ_EN - patch stream to disable hiz Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: move a bunch of modesetting debug to correct debug usage.Dave Airlie14-116/+116
This migrates a bunch of DRM_DEBUG->DRM_DEBUG_KMS so we can get more modesetting related info without all the other ioctl handling easily. Also the PM code moves to DRM_DEBUG_DRIVER mostly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: trivial code style fixes for audioRafał Miłecki1-6/+10
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: remove viewport transform from r6xx/r7xx blit emitAlex Deucher1-18/+0
We aren't using it, so no need. Save additional dwords. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: group r6xx/r7xx newly sequential blit stateAlex Deucher1-203/+35
group state that is emitted sequentially into fewer packets. This saves a number of dwords. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: reorder r6xx/r7xx blit state emit to make more regs sequentialAlex Deucher1-184/+184
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: r6xx/r7xx move vport clipping to a single packetAlex Deucher1-248/+62
Saves lots of dwords in blit emit Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: group r6xx/r7xx sequential blit stateAlex Deucher1-376/+64
group state that is emitted sequentially into fewer packets. This saves a number of dwords. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: remove duplicate state emit in r6xx/r7xx blitAlex Deucher1-16/+0
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: add comments to r6xx/r7xx blit stateAlex Deucher1-206/+515
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms/r7xx: add workaround for hw issue with HDP flushAlex Deucher4-3/+28
Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain situations. Add workaround. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: remove rs4xx gart limitAlex Deucher1-8/+0
We used to limit the rs4xx gart aperture to 32 MB, but I suspect that was due to not meeting the alignment requirements of the aperture. This patch should only be applied after: "drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics" has been applied. This patch should probably soak for a bit in d-r-t. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02Merge tag 'v2.6.35-rc6' into drm-radeon-nextDave Airlie19-31/+63
Need this to avoid conflicts with future radeon fixes
2010-08-02drm: radeon: fix sign bugDan Carpenter1-3/+5
The "error" variable is unsigned so it's never less than zero. I changed it to check if (freq < current_freq) directly. "best_error" is also unsigned so "best_error - 100" could be a large number instead of a negative. Since "error" is unsigned it is never less than a negative and so the cases where "best_error" is less than or equal to 100 are false. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: check/restore sanity before doing anything else with GPU.Dave Airlie9-0/+42
On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset. Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system. This allows kexec to work on a Power6/RN50 system. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: fall back to GTT if bo creation/validation in VRAM fails.Michel Dänzer1-9/+18
This fixes a problem where on low VRAM cards we'd run out of space for validation. [airlied: Tested on my M7, Thinkpad T42, compiz works with no problems.] Signed-off-by: Michel Dänzer <daenzer@vmware.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: add ioport register accessAlex Deucher4-4/+68
This is required for the NB_MISC regs on rs780/rs880 which means HDMI/DVI/DP ports using PCIEPHY won't work without it. It might also help with s/r (asic init) issues on other atombios cards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28774 and similar issues reported by Alberto Milone. [airlied: Squash io fix patch] Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: enable HDMI audio on RS600/RS690/RS740Rafał Miłecki3-2/+22
We will need method of selecting encoder that should receive HDMI block. For now we assign HDMI block to first enabled encoder. Hopefully there are not many RS6x0 chips with two digital encoders. [airlied: add RS740 checks as per Alex suggestion.] Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: track audio engine state, do not use not setup timerRafał Miłecki2-2/+5
This is needed to enable audio support on devices using polling. In case user decides to disable audio (module parameter) we still will try to use timer in r600_audio_enable_polling. This would lead to BUG in kernel/timer.c. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms/r6xx+: add query for tile config (v2)Alex Deucher6-3/+21
Userspace needs this information to access tiled buffers via the CPU. v2: rebased on evergreen accel changes Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>