aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/tilcdc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-12-15Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2-7/+3
Pull drm updates from Dave Airlie: "Highlights: - AMD KFD driver merge This is the AMD HSA interface for exposing a lowlevel interface for GPGPU use. They have an open source userspace built on top of this interface, and the code looks as good as it was going to get out of tree. - Initial atomic modesetting work The need for an atomic modesetting interface to allow userspace to try and send a complete set of modesetting state to the driver has arisen, and been suffering from neglect this past year. No more, the start of the common code and changes for msm driver to use it are in this tree. Ongoing work to get the userspace ioctl finished and the code clean will probably wait until next kernel. - DisplayID 1.3 and tiled monitor exposed to userspace. Tiled monitor property is now exposed for userspace to make use of. - Rockchip drm driver merged. - imx gpu driver moved out of staging Other stuff: - core: panel - MIPI DSI + new panels. expose suggested x/y properties for virtual GPUs - i915: Initial Skylake (SKL) support gen3/4 reset work start of dri1/ums removal infoframe tracking fixes for lots of things. - nouveau: tegra k1 voltage support GM204 modesetting support GT21x memory reclocking work - radeon: CI dpm fixes GPUVM improvements Initial DPM fan control - rcar-du: HDMI support added removed some support for old boards slave encoder driver for Analog Devices adv7511 - exynos: Exynos4415 SoC support - msm: a4xx gpu support atomic helper conversion - tegra: iommu support universal plane support ganged-mode DSI support - sti: HDMI i2c improvements - vmwgfx: some late fixes. - qxl: use suggested x/y properties" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits) drm: sti: fix module compilation issue drm/i915: save/restore GMBUS freq across suspend/resume on gen4 drm: sti: correctly cleanup CRTC and planes drm: sti: add HQVDP plane drm: sti: add cursor plane drm: sti: enable auxiliary CRTC drm: sti: fix delay in VTG programming drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: fix hdmi avi infoframe drm: sti: remove event lock while disabling vblank drm: sti: simplify gdp code drm: sti: clear all mixer control drm: sti: remove gpio for HDMI hot plug detection drm: sti: allow to change hdmi ddc i2c adapter drm/doc: Document drm_add_modes_noedid() usage drm/i915: Remove '& 0xffff' from the mask given to WA_REG() drm/i915: Invert the mask and val arguments in wa_add() and WA_REG() drm: Zero out DRM object memory upon cleanup drm/i915/bdw: Fix the write setting up the WIZ hashing mode ...
2014-11-21drm/tilcdc: Deletion of an unnecessary check before the function call "drm_fbdev_cma_hotplug_event"Markus Elfring1-2/+1
The drm_fbdev_cma_hotplug_event() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-15drm: flip-work: change drm_flip_work_init prototypeBoris BREZILLON1-5/+1
Now that we're using lists instead of kfifo to store drm flip-work tasks we do not need the size parameter passed to drm_flip_work_init function anymore. Moreover this function cannot fail anymore, we can thus remove the return code. Modify drm_flip_work_init users to take account of these changes. [airlied: fixed two unused variable warnings] Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-05drm: Move drm_crtc_init from drm_crtc.h to drm_plane_helper.hDaniel Vetter1-0/+1
Just a bit of OCD cleanup on headers - this function isn't the core interface any more but just a helper for drivers who haven't yet transitioned to universal planes. Put the declaration at the right spot and sprinkle necessary #includes over all drivers. Maybe this helps to encourage driver maintainers to do the switch. v2: Fix #include ordering for tegra, reported by 0-day builder. v3: Include required headers, reported by Thierry. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-10-20gpu: drm: tilcdc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-17drm/tilcdc: panel: Add support for enable GPIOEzequiel Garcia1-5/+32
In order to support the "enable GPIO" available in many panel devices, this commit adds a proper devicetree binding. By providing an enable GPIO in the devicetree, the driver can now turn off and on the panel device, and/or the backlight device. Both the backlight and the GPIO are optional properties. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-17drm/tilcdc: panel: Set return value explicitlyEzequiel Garcia1-1/+3
Instead of setting an initial value for the return code, set it explicitly on each error path. This is just a cosmetic cleanup, as preparation for the enable GPIO support. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-17drm/tilcdc: panel: Fix backlight devicetree supportEzequiel Garcia1-5/+18
The current backlight support is broken; the driver expects a backlight-class in the panel devicetree node. Fix this by implementing it properly, getting an optional backlight from a phandle. This shouldn't cause any backward-compatibility DT issue because the current implementation doesn't work and is not even documented. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-17drm/tilcdc: panel: Use devm_kzalloc to simplify the error pathEzequiel Garcia1-3/+1
Using the managed variant to allocate the resource makes the code simpler and less error-prone. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-17drm/tilcdc: panel: Spurious whitespace removalEzequiel Garcia1-1/+0
Just a cosmetic cleanup. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-17drm/tilcdc: panel: Remove unused variableEzequiel Garcia1-2/+0
Just a trivial cleanup to remove the variable. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-17drm/tilcdc: panel: Add missing of_node_putEzequiel Garcia1-0/+3
This commit adds the missing calls to of_node_put to release the node that's currently held by the of_get_child_by_name() call in the panel info parsing code. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-17drm/tilcdc: Fix the error path in tilcdc_load()Ezequiel Garcia1-10/+50
The current error path calls tilcdc_unload() in case of an error to release the resources. However, this is wrong because not all resources have been allocated by the time an error occurs in tilcdc_load(). To fix it, this commit adds proper labels to bail out at the different stages in the load function, and release only the resources actually allocated. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-10drm: add driver->set_busid() callbackDavid Herrmann1-0/+1
One step closer to dropping all the drm_bus_* code: Add a driver->set_busid() callback and make all drivers use the generic helpers. Nouveau is the only driver that uses two different bus-types with the same drm_driver. This is totally broken if both buses are available on the same machine (unlikely, but lets be safe). Therefore, we create two different drivers for each platform during module_init() and set the set_busid() callback respectively. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-10drm/tilcdc: Fix build breakageSachin Kamat3-3/+3
Commit 34ea3d386347 ("drm: add register and unregister functions for connectors") probably missed out converting the drm_sysfs_connector_remove instances in the following files. Without this patch we get the following compilation error: ERROR: "drm_sysfs_connector_remove" [drivers/gpu/drm/tilcdc/tilcdc.ko] undefined! Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> CC: Thomas Wood <thomas.wood@intel.com> CC: David Herrmann <dh.herrmann@gmail.com> CC: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-09drm/tilcdc: oops a Module.symvers snuck inDave Airlie1-0/+0
remove it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: replace late_initcall with module_initGuido Martínez1-1/+1
Use module_init instead of late_initcall, as is the norm for modular drivers. module_init was used until 6e8de0bd6a51fdeebd5d975c4fcc426f730b339b ("drm/tilcdc: add encoder slave (v2)") changed it to a late_initcall, but it does not explain why. Tests show it's working properly with module_init. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: remove submodule destroy callsGuido Martínez6-53/+50
The TI tilcdc driver is designed with a notion of submodules. Currently, at unload time, these submodules are iterated and destroyed. Now that the tilcdc remove order is fixed, this can be handled perfectly by the kernel using the device infrastructure, since each submodule is a kernel driver itself, and they are only destroy()'ed at unload time. Therefore we move the destroy() functionality to each submodule's remove(). Also, remove some checks in the unloading process since the new code guarantees the resources are allocated and need a release. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: fix double kfreeGuido Martínez1-3/+1
display_timings_release calls kfree on the display_timings object passed to it. Calling kfree after it is wrong. SLUB debug showed the following warning: ============================================================================= BUG kmalloc-64 (Tainted: G W ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in of_get_display_timings+0x2c/0x214 age=601 cpu=0 pid=884 __slab_alloc.constprop.79+0x2e0/0x33c kmem_cache_alloc+0xac/0xdc of_get_display_timings+0x2c/0x214 panel_probe+0x7c/0x314 [tilcdc] platform_drv_probe+0x18/0x48 [..snip..] INFO: Freed in panel_destroy+0x18/0x3c [tilcdc] age=0 cpu=0 pid=907 __slab_free+0x34/0x330 panel_destroy+0x18/0x3c [tilcdc] tilcdc_unload+0xd0/0x118 [tilcdc] drm_dev_unregister+0x24/0x98 [..snip..] Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: fix release order on exitGuido Martínez1-3/+3
Unregister resources in the correct order on tilcdc_drm_fini, which is the reverse order they were registered during tilcdc_drm_init. This also means unregistering the driver before releasing its resources. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: panel: fix leak when unloading the moduleGuido Martínez1-0/+1
The driver did not unregister the allocated framebuffer, which caused memory leaks (and memory manager WARNs) when unloading. Also, the framebuffer device under /dev still existed after unloading. Add a call to drm_fbdev_cma_fini when unloading the module to prevent both issues. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: tfp410: fix dangling sysfs connector nodeGuido Martínez1-0/+1
Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver, otherwise we will get a warning about a duplicate filename in sysfs. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: slave: fix dangling sysfs connector nodeGuido Martínez1-0/+1
Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: tda998x 0-0070: found TDA19988 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 825 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-HDMI-A-1' Modules linked in: [..] CPU: 0 PID: 825 Comm: modprobe Not tainted 3.15.0-rc4-00027-g9dcdef4 #82 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1b40>] (slave_modeset_init+0x120/0x1bc [tilcdc]) [<bf0b1b40>] (slave_modeset_init [tilcdc]) from [<bf0b2be8>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2be8>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [..snip..] ---[ end trace 4df8d614936ebdee ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: panel: fix dangling sysfs connector nodeGuido Martínez1-0/+1
Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 824 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-LVDS-1' Modules linked in: [...] CPU: 0 PID: 824 Comm: modprobe Not tainted 3.15.0-rc4-00027-g6484f96-dirty #81 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1fec>] (panel_modeset_init+0xb8/0x134 [tilcdc]) [<bf0b1fec>] (panel_modeset_init [tilcdc]) from [<bf0b2bf0>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2bf0>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [ .. snip .. ] ---[ end trace b2d09cd9578b0497 ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-19drm: add register and unregister functions for connectorsThomas Wood3-3/+3
Introduce generic functions to register and unregister connectors. This provides a common place to add and remove associated user space interfaces. Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-23drm: pass the irq explicitly to drm_irq_installDaniel Vetter1-1/+1
Unfortunately this requires a drm-wide change, and I didn't see a sane way around that. Luckily it's fairly simple, we just need to inline the respective get_irq implementation from either drm_pci.c or drm_platform.c. With that we can now also remove drm_dev_to_irq from drm_irq.c. Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-01drm: Replace crtc fb with primary plane fb (v3)Matt Roper1-4/+4
Now that CRTC's have a primary plane, there's no need to track the framebuffer in the CRTC. Replace all references to the CRTC fb with the primary plane's fb. This patch was generated by the Coccinelle semantic patching tool using the following rules: @@ struct drm_crtc C; @@ - (C).fb + C.primary->fb @@ struct drm_crtc *C; @@ - (C)->fb + C->primary->fb v3: Generate patch via coccinelle. Actual removal of crtc->fb has been moved to a subsequent patch. v2: Fixup several lingering crtc->fb instances that were missed in the first patch iteration. [Rob Clark] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-01-14drm: store the gem vma offset manager in a typed pointerDaniel Vetter1-1/+1
This was hidden in a generic void * dev->mm_private. But only ever used for gem. But thanks to this fake generic pretension no one noticed that Rob's drm drivers are now all broken. So just give the offset manager a type pointer and fix up msm, omapdrm and tilcdc. v2: Fixup compile fail. v3: Fixup rebase fail that David spotted. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18drm: Kill DRM_IRQ_ARGSDaniel Vetter1-1/+1
I've killed them a long time ago in drm/i915, let's get rid of this remnant of shared drm core days for good. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18drm/tilcdc: call drm_put_dev directly from ->removeDaniel Vetter1-1/+1
tilcdc already stores the drm_device in the driver data pointer. So use that. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-11drm: Add separate Kconfig option for fbdev helpersDaniel Vetter1-0/+1
For drivers which might want to disable fbdev legacy support. Select the new option in all drivers for now, so this shouldn't result in any change. Drivers need some work anyway to make fbdev support optional (if they have it implemented, that is), so the recommended way to expose this is by adding per-driver options. At least as long as most drivers don't support disabling the fbdev support. v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm driver can already take advantage of this, which allows us to build msm without any fbdev depencies in the kernel! v3: Move the MODULE_* stuff from the fbdev helper file to drm_crtc_helper.c. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Dave Airlie <airlied@linux.ie> Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-05Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-26/+47
Pull drm tree changes from Dave Airlie: "This is the main drm pull request, I have some overlap with sound and arm-soc, the sound patch is acked and may conflict based on -next reports but should be a trivial fixup, which I'll leave to you! Highlights: - new drivers: MSM driver from Rob Clark - non-drm: switcheroo and hdmi audio driver support for secondary GPU poweroff, so drivers can use runtime PM to poweroff the GPUs. This can save 5 or 6W on some optimus laptops. - drm core: combined GEM and TTM VMA manager per-filp mmap permission tracking initial rendernode support (via a runtime enable for now, until we get api stable), remove old proc support, lots of cleanups of legacy code hdmi vendor infoframes and 4k modes lots of gem/prime locking and races fixes async pageflip scaffolding drm bridge objects - i915: Haswell PC8+ support and eLLC support, HDMI 4K support, initial per-process VMA pieces, watermark reworks, convert to generic hdmi infoframes, encoder reworking, fastboot support, - radeon: CIK PM support, remove 3d blit code in favour of DMA engines, Berlin GPU support, HDMI audio fixes - nouveau: secondary GPU power down support for optimus laptops, lots of fixes, use MSI, VP3 engine support - exynos: runtime pm support for g2d, DT support, remove non-DT, - tda998x i2c driver: lots of fixes for sync issues - gma500: lots of cleanups - rcar: add LVDS support, fbdev emulation, - tegra: just minor fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits) drm/exynos: Fix build error with exynos_drm_connector.c drm/exynos: Remove non-DT support in exynos_drm_fimd drm/exynos: Remove non-DT support in exynos_hdmi drm/exynos: Remove non-DT support in exynos_drm_g2d drm/exynos: Remove non-DT support in exynos_hdmiphy drm/exynos: Remove non-DT support in exynos_ddc drm/exynos: Make Exynos DRM drivers depend on OF drm/exynos: Consider fallback option to allocation fail drm/exynos: fimd: move platform data parsing to separate function drm/exynos: fimd: get signal polarities from device tree drm/exynos: fimd: replace struct fb_videomode with videomode drm/exynos: check a pixel format to a particular window layer drm/exynos: fix fimd pixel format setting drm/exynos: Add NULL pointer check drm/exynos: Remove redundant error messages drm/exynos: Add missing of.h header include drm/exynos: Remove redundant NULL check in exynos_drm_buf drm/exynos: add device tree support for rotator drm/exynos: Add missing includes drm/exynos: add runtime pm interfaces to g2d driver ...
2013-08-30drm: Pass page flip ioctl flags to driverKeith Packard1-1/+2
This lets drivers see the flags requested by the application [airlied: fixup for rcar/imx/msm] Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-23i2c: move OF helpers into the coreWolfram Sang2-2/+0
I2C of helpers used to live in of_i2c.c but experience (from SPI) shows that it is much cleaner to have this in the core. This also removes a circular dependency between the helpers and the core, and so we can finally register child nodes in the core instead of doing this manually in each driver. So, fix the drivers and documentation, too. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-19drm/tilcdc: use flip-work helperRob Clark1-21/+12
Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: remove FASYNC supportDaniel Vetter1-1/+0
So I've stumbled over drm_fasync and wondered what it does. Digging that up is quite a story. First I've had to read up on what this does and ended up being rather bewildered why peopled loved signals so much back in the days that they've created SIGIO just for that ... Then I wondered how this ever works, and what that strange "No-op." comment right above it should mean. After all calling the core fasync helper is pretty obviously not a noop. After reading through the kernels FASYNC implementation I've noticed that signals are only sent out to the processes attached with FASYNC by calling kill_fasync. No merged drm driver has ever done that. After more digging I've found out that the only driver that ever used this is the so called GAMMA driver. I've frankly never heard of such a gpu brand ever before. Now FASYNC seems to not have been the only bad thing with that driver, since Dave Airlie removed it from the drm driver with prejudice: commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed Author: Dave Airlie <airlied@linux.ie> Date: Sun Aug 29 12:04:35 2004 +0000 Drop GAMMA DRM from a great height ... Long story short, the drm fasync support seems to be doing absolutely nothing. And the only user of it was never merged into the upstream kernel. And we don't need any fops->fasync callback since the fcntl implementation in the kernel already implements the noop case correctly. So stop this particular cargo-cult and rip it all out. v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers (somehow I've missed that one in staging). Also drop the reference in the drm DocBook. ARM compile-fail reported by Rob Clark. v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this patch here. v4: Actually git add ... tsk. Cc: Dave Airlie <airlied@linux.ie> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm/tilcdc fixup mode to workaround sync for tda998xDarren Etheridge2-2/+32
Add a fixup function that will flip the hsync priority and add a hskew value that is used to shift the tda998x to the right by a variable number of pixels depending on the mode. This works around an issue with the sync timings that tilcdc is outputing. Signed-off-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Russell King <rmk_kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07drm/gem: create drm_gem_dumb_destroyDaniel Vetter1-1/+1
All the gem based kms drivers really want the same function to destroy a dumb framebuffer backing storage object. So give it to them and roll it out in all drivers. This still leaves the option open for kms drivers which don't use GEM for backing storage, but it does decently simplify matters for gem drivers. Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org> Cc: Ben Skeggs <skeggsb@gmail.com> Reviwed-by: Rob Clark <robdclark@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: Clear bits of register we're going to set.Pantelis Antoniou1-0/+2
Bits weren't cleared so resolution changes didn't work. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc fixing i2c/slave initialization raceDarren Etheridge3-25/+40
In certain senarios drm will initialize before i2c this means that i2c slave devices like the nxp tda998x will fail to be probed. This patch detects this condition then defers the probe of the slave device and the tilcdc main driver. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: whitespace fixes and tidyupDarren Etheridge1-6/+10
keeping checkpatch happy. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: adding more guards to prevent selection of invalid modesDarren Etheridge1-0/+46
The tilcdc has a number of limitations for the allowed sizes of the various adjustable timing parameter. Some modes are outside of these timings. This commit will prune modes that report timings that will overflow the allowed sizes in the tilcdc. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: fixing off by one errors found on analyzerDarren Etheridge1-7/+12
When hooking up to an HDMI analyzer noticed some timings were off by one. Referring to the hardware technical reference manual for the lcd controller some of the timing registers use 0 to represent 1. This patch addresses that issue. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: adding some more devicetree configDarren Etheridge3-3/+57
Adding support for max-pixelclock and max-width device tree entries. As some devices that use the tilcdc hardware module have restrictions on the allowed/tested values. Also update DT bindings document to reflect new parameters. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: support pixel widths greater than 1024Darren Etheridge2-0/+16
TI LCD controller version 2 has an extended eleventh bit that enables horizontal resolutions greater than 1024 pixels to be specified (upto 2048). This patch adds support for setting this bit on LCDC V2. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-27Merge tag 'v3.10-rc7' into drm-nextDave Airlie1-0/+1
Linux 3.10-rc7 The sdvo lvds fix in this -fixes pull commit c3456fb3e4712d0448592af3c5d644c9472cd3c1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jun 10 09:47:58 2013 +0200 drm/i915: prefer VBT modes for SVDO-LVDS over EDID has a silent functional conflict with commit 990256aec2f10800595dddf4d1c3441fcd6b2616 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri May 31 12:17:07 2013 +0000 drm: Add probed modes in probe order in drm-next. W simply need to add the vbt modes before edid modes, i.e. the other way round than now. Conflicts: drivers/gpu/drm/drm_prime.c drivers/gpu/drm/i915/intel_sdvo.c
2013-06-20gpu:drm:tilcdc: get preferred_bpp value from DTBenoit Parrot5-1/+18
The preferred_bpp value in currently hard-coded to 16. This causes color corruption on the am335x-evm lcd panel which requires 32 bpp instead. This changes attempts to use the configured bpp value from the DT or built-in panel-info struct. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-17drm: Drop all the stub gamma_get, gamma_set, load_lut functions from driversVille Syrjälä1-5/+0
Many of the drivers didn't implement palette/gamma handling, but were forced to provide stubs for the hooks to avoid drm_fb_helper from oopsing. Now that the hooks are optional, we can eliminate all the stubs. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-03drm/tilcd: select BACKLIGHT_LCD_SUPPORTArnd Bergmann1-0/+1
The dependecies for BACKLIGHT_CLASS_DEVICE are defined a bit strange, but it seems one has to always select both BACKLIGHT_CLASS_DEVICE and BACKLIGHT_LCD_SUPPORT to avoid this error: drivers/gpu/drm/tilcdc/tilcdc_panel.c:396: undefined reference to `of_find_backlight_by_node' Cc: Rob Clark <robdclark@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-05-02Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-10/+9
Pull drm updates from Dave Airlie: "This is the main drm pull request for 3.10. Wierd bits: - OMAP drm changes required OMAP dss changes, in drivers/video, so I took them in here. - one more fbcon fix for font handover - VT switch avoidance in pm code - scatterlist helpers for gpu drivers - have acks from akpm Highlights: - qxl kms driver - driver for the spice qxl virtual GPU Nouveau: - fermi/kepler VRAM compression - GK110/nvf0 modesetting support. Tegra: - host1x core merged with 2D engine support i915: - vt switchless resume - more valleyview support - vblank fixes - modesetting pipe config rework radeon: - UVD engine support - SI chip tiling support - GPU registers initialisation from golden values. exynos: - device tree changes - fimc block support Otherwise: - bunches of fixes all over the place." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits) qxl: update to new idr interfaces. drm/nouveau: fix build with nv50->nvc0 drm/radeon: fix handling of v6 power tables drm/radeon: clarify family checks in pm table parsing drm/radeon: consolidate UVD clock programming drm/radeon: fix UPLL_REF_DIV_MASK definition radeon: add bo tracking debugfs drm/radeon: add new richland pci ids drm/radeon: add some new SI PCI ids drm/radeon: fix scratch reg handling for UVD fence drm/radeon: allocate SA bo in the requested domain drm/radeon: fix possible segfault when parsing pm tables drm/radeon: fix endian bugs in atom_allocate_fb_scratch() OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found OMAPDSS: VENC: Add error handling for venc_probe_pdata OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata OMAPDSS: DSI: Add error handling for dsi_probe_pdata OMAPDSS: SDI: Add error handling for sdi_probe_pdata OMAPDSS: DPI: Add error handling for dpi_probe_pdata ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.