aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/vc4/vc4_hdmi.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-06-28drm/vc4: hdmi: Clear unused infoframe packet RAM registersDom Cobley1-1/+10
Using a hdmi analyser the bytes in packet ram registers beyond the length were visible in the infoframes and it flagged the checksum as invalid. Zeroing unused words of packet RAM avoids this Fixes: 21317b3fba54 ("drm/vc4: Set up the AVI and SPD infoframes.") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Link: https://lore.kernel.org/r/20220613144800.326124-20-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-28drm/vc4: hdmi: Add all the vc5 HDMI registers into the debugfs dumpsDave Stevenson1-0/+39
The vc5 HDMI registers hadn't been added into the debugfs register sets, therefore weren't dumped on request. Add them in. Fixes: 8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-19-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-28drm/vc4: hdmi: Disable audio if dmas property is present but emptyPhil Elwell1-3/+3
The dmas property is used to hold the dmaengine channel used for audio output. Older device trees were missing that property, so if it's not there we disable the audio output entirely. However, some overlays have set an empty value to that property, mostly to workaround the fact that overlays cannot remove a property. Let's add a test for that case and if it's empty, let's disable it as well. Cc: <stable@vger.kernel.org> Signed-off-by: Phil Elwell <phil@raspberrypi.org> Link: https://lore.kernel.org/r/20220613144800.326124-18-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-27drm/vc4: Migrate to new style legacy DAI naming flagCharles Keepax1-0/+1
Change the legacy DAI naming flag from opting in to the new scheme (non_legacy_dai_naming), to opting out of it (legacy_dai_naming). This driver appears to be on the CPU side of the DAI link and currently uses the legacy naming, so add the new flag. Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22drm/vc4: hdmi: Fixed possible integer overflowSaud Farooqui1-1/+1
Multiplying ints and saving it in unsigned long long could lead to integer overflow before being type casted to unsigned long long. Addresses-Coverity: 1505113: Unintentional integer overflow. Signed-off-by: Saud Farooqui <farooqui_saud@hotmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/PA4P189MB1421E63C0FF3EBF234A80AB38BA79@PA4P189MB1421.EURP189.PROD.OUTLOOK.COM
2022-05-25Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-85/+402
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
2022-05-12drm/vc4: hdmi: Fix build error for implicit function declarationHui Tang1-0/+1
drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_connector_detect’: drivers/gpu/drm/vc4/vc4_hdmi.c:228:7: error: implicit declaration of function ‘gpiod_get_value_cansleep’; did you mean ‘gpio_get_value_cansleep’? [-Werror=implicit-function-declaration] if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_get_value_cansleep CC [M] drivers/gpu/drm/vc4/vc4_validate.o CC [M] drivers/gpu/drm/vc4/vc4_v3d.o CC [M] drivers/gpu/drm/vc4/vc4_validate_shaders.o CC [M] drivers/gpu/drm/vc4/vc4_debugfs.o drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_bind’: drivers/gpu/drm/vc4/vc4_hdmi.c:2883:23: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_clk_get_optional’? [-Werror=implicit-function-declaration] vc4_hdmi->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN); ^~~~~~~~~~~~~~~~~~~~~~~ devm_clk_get_optional drivers/gpu/drm/vc4/vc4_hdmi.c:2883:59: error: ‘GPIOD_IN’ undeclared (first use in this function); did you mean ‘GPIOF_IN’? vc4_hdmi->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN); ^~~~~~~~ GPIOF_IN drivers/gpu/drm/vc4/vc4_hdmi.c:2883:59: note: each undeclared identifier is reported only once for each function it appears in cc1: all warnings being treated as errors Fixes: 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod") Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220510135148.247719-1-tanghui20@huawei.com
2022-04-25drm/display: Move SCDC helpers into display-helper libraryThomas Zimmermann1-1/+1
SCDC is the Status and Control Data Channel for HDMI. Move the SCDC helpers into display/ and split the header into files for core and helpers. Update all affected drivers. No functional changes. To avoid the proliferation of Kconfig options, SCDC is part of DRM's support for HDMI. If necessary, a new option could make SCDC an independent feature. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-9-tzimmermann@suse.de
2022-04-25drm/display: Move HDMI helpers into display-helper moduleThomas Zimmermann1-1/+1
Move DRM's HMDI helpers into the display/ subdirectoy and add it to DRM's display helpers. Update all affected drivers. No functional changes. The HDMI helpers were implemented in the EDID and connector code, but are actually unrelated. With the move to the display-helper library, we can remove the dependency on drm_edid.{c,h} in some driver's HDMI source files. Several of the HDMI helpers remain in EDID code because both share parts of their implementation internally. With better refractoring of the EDID code, those HDMI helpers could be moved into the display-helper library as well. v3: * fix Kconfig dependencies (Javier) v2: * reduce HDMI helpers to avoid exporting functions (Jani) * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
2022-04-21drm/vc4: hdmi: Remove vc4_hdmi_encoderJosé Expósito1-12/+12
The vc4_hdmi_encoder struct was used exclusively to cache the value returned by drm_detect_hdmi_monitor() in order to avoid calling it multiple times. Now that drm_detect_hdmi_monitor() has been replaced with drm_display_info.is_hdmi, there is no need to have an extra struct. Remove vc4_hdmi_encoder. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420114500.187664-3-jose.exposito89@gmail.com
2022-04-21drm/vc4: hdmi: Replace drm_detect_hdmi_monitor() with is_hdmiJosé Expósito1-11/+6
Once EDID is parsed, the monitor HDMI support information is cached in drm_display_info.is_hdmi by drm_parse_hdmi_vsdb_video(). This driver calls drm_detect_hdmi_monitor() to receive the same information and stores its own cached value in vc4_hdmi_encoder.hdmi_monitor, which is less efficient. Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi instead. This also allows to remove vc4_hdmi_encoder.hdmi_monitor. drm_detect_hdmi_monitor() is called in vc4_hdmi_connector_detect() and vc4_hdmi_connector_get_modes(). In both cases it is safe to rely on drm_display_info.is_hdmi as shown by ftrace: $ sudo trace-cmd record -p function_graph -l "vc4_hdmi_*" -l "drm_*" vc4_hdmi_connector_detect: vc4_hdmi_connector_detect() { drm_get_edid() { drm_connector_update_edid_property() { drm_add_display_info() { drm_reset_display_info(); drm_for_each_detailed_block.part.0(); drm_parse_cea_ext() { drm_find_cea_extension(); drm_parse_hdmi_vsdb_video(); /* drm_display_info.is_hdmi is cached here */ } } } } /* drm_display_info.is_hdmi is used here */ } vc4_hdmi_connector_get_modes: vc4_hdmi_connector_get_modes() { drm_get_edid() { drm_connector_update_edid_property() { drm_add_display_info() { drm_reset_display_info(); drm_for_each_detailed_block.part.0(); drm_parse_cea_ext() { drm_find_cea_extension(); drm_parse_hdmi_vsdb_video(); /* drm_display_info.is_hdmi is cached here */ } } } } /* drm_display_info.is_hdmi is used here */ drm_connector_update_edid_property(); } Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420114500.187664-2-jose.exposito89@gmail.com
2022-04-06drm/vc4: hdmi: Remove clock rate initializationMaxime Ripard1-13/+0
Now that the clock driver makes sure we never end up with a rate of 0, the HDMI driver doesn't need to care anymore. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20220225143534.405820-13-maxime@cerno.tech
2022-04-05Merge drm/drm-next into drm-misc-nextMaxime Ripard1-9/+28
Let's start the 5.19 development cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-03-24drm/vc4: hdmi: Support HDMI YUV outputMaxime Ripard1-16/+275
In addition to the RGB444 output, the BCM2711 HDMI controller supports the YUV444 and YUV422 output formats. Let's add support for them in the driver, but still use RGB as the preferred format. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-8-maxime@cerno.tech
2022-03-24drm/vc4: hdmi: Always try to have the highest bpcMaxime Ripard1-4/+40
Currently we take the max_bpc property as the bpc value and do not try anything else. However, what the other drivers seem to be doing is that they would try with the highest bpc allowed by the max_bpc property and the hardware capabilities, test if it results in an acceptable configuration, and if not decrease the bpc and try again. Let's use the same logic. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-7-maxime@cerno.tech
2022-03-24drm/vc4: hdmi: Take bpp into account for the scramblerMaxime Ripard1-4/+12
The current code only base its decision for whether the scrambler must be enabled or not on the pixel clock of the mode, but doesn't take the bits per color into account. Let's leverage the new function to compute the clock rate in the scrambler setup code. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-6-maxime@cerno.tech
2022-03-24drm/vc4: hdmi: Take the sink maximum TMDS clock into accountMaxime Ripard1-0/+6
In the function that validates that the clock isn't too high, we've only taken our controller limitations into account so far. However, the sink can have a limit on the maximum TMDS clock it can deal with too which is exposed through the EDID and the drm_display_info. Make sure we check it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-5-maxime@cerno.tech
2022-03-24drm/vc4: hdmi: Move clock calculation into its own functionMaxime Ripard1-15/+37
The code to compute our clock rate for a given setup will be called in multiple places in the next patches, so let's create a separate function for it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-4-maxime@cerno.tech
2022-03-24drm/vc4: hdmi: Move clock validation to its own functionMaxime Ripard1-11/+15
Our code is doing the same clock rate validation in multiple instances. Let's create a helper to share the rate validation. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-3-maxime@cerno.tech
2022-03-24drm/vc4: hdmi: Rename pixel_rate variableMaxime Ripard1-20/+20
The pixel_rate field in the vc4_hdmi_connector_state struct actually stores the TMDS character rate, let's rename it for consistency. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-2-maxime@cerno.tech
2022-02-28Backmerge tag 'v5.17-rc6' into drm-nextDave Airlie1-0/+8
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-25Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-21/+5
drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
2022-02-21drm/vc4: Use drm_mode_copy()Ville Syrjälä1-3/+2
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-18-ville.syrjala@linux.intel.com
2022-02-17drm/vc4: hdmi: Unregister codec device on unbindMaxime Ripard1-0/+8
On bind we will register the HDMI codec device but we don't unregister it on unbind, leading to a device leakage. Unregister our device at unbind. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech
2022-02-14Backmerge tag 'v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-nextDave Airlie1-9/+20
Daniel asked for this for some intel deps, so let's do it now. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-03drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.Dave Stevenson1-0/+2
The 2711 pixel valve can't produce odd horizontal timings, and checks were added to vc4_hdmi_encoder_atomic_check and vc4_hdmi_encoder_mode_valid to filter out/block selection of such modes. Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing values before programming them into the PV. The PV values, therefore, can not be odd, and so the modes can be supported. Amend the filtering appropriately. Fixes: 57fb32e632be ("drm/vc4: hdmi: Block odd horizontal timings") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
2022-02-03drm/vc4: hdmi: Don't try disabling SCDC on Pi0-3.Dave Stevenson1-1/+2
The code that set the scdc_enabled flag to ensure it was disabled at boot time also ran on Pi0-3 where there is no SCDC support. This lead to a warning in vc4_hdmi_encoder_post_crtc_disable due to vc4_hdmi_disable_scrambling being called and trying to read (and write) register HDMI_SCRAMBLER_CTL which doesn't exist on those platforms. Only set the flag should the interface be configured to support more than HDMI 1.4. Fixes: 1998646129fa ("drm/vc4: hdmi: Introduce a scdc_enabled flag") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220127134559.292778-1-maxime@cerno.tech
2022-02-03drm/vc4: hdmi: Ensure we don't use 2711 HPD registers on Pi0-3Dave Stevenson1-8/+16
The existing logic was flawed in that it could try reading the 2711 specific registers for HPD on a CM1/3 where the HPD GPIO hadn't been defined in DT. Ensure we don't do the 2711 register read on invalid hardware, and then Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220127131754.236074-1-maxime@cerno.tech
2022-02-02drm/vc4: hdmi: Simplify the connector state retrievalMaxime Ripard1-18/+3
When we have the entire DRM state, retrieving the connector state only requires the drm_connector pointer. Fortunately for us, we have allocated it as a part of the vc4_hdmi structure, so we can retrieve get a pointer by simply accessing our field in that structure. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220127111404.221882-1-maxime@cerno.tech
2022-01-25drm/vc4: hdmi: Change CSC callback prototypeMaxime Ripard1-1/+6
In order to support the YUV output, we'll need the atomic state to know what is the state of the associated property in the CSC setup callback. Let's change the prototype of that callback to allow us to access it. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-11-maxime@cerno.tech
2022-01-25drm/vc4: hdmi: Define colorspace matricesMaxime Ripard1-29/+49
The current CSC setup code for the BCM2711 uses a sequence of register writes to configure the CSC depending on whether we output using a full or limited range. However, with the upcoming introduction of the YUV output, we're going to add new matrices to perform the conversions, so we should switch to something a bit more flexible that takes the matrix as an argument and programs the CSC accordingly. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-10-maxime@cerno.tech
2022-01-25drm/vc4: hdmi: Replace CSC_CTL hardcoded value by definesMaxime Ripard1-3/+2
On BCM2711, the HDMI_CSC_CTL register value has been hardcoded to an opaque value. Let's replace it with properly defined values. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-9-maxime@cerno.tech
2022-01-25drm/vc4: hdmi: Move XBAR setup to csc_setupMaxime Ripard1-1/+2
On the BCM2711, the HDMI_VEC_INTERFACE_XBAR register configuration depends on whether we're using an RGB or YUV output. Let's move that configuration to the CSC setup. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-8-maxime@cerno.tech
2022-01-25drm/vc4: hdmi: Use full range helper in csc functionsMaxime Ripard1-20/+11
The CSC callbacks takes a boolean as an argument to tell whether we're using the full range or limited range RGB. However, with the upcoming YUV support, the logic will be a bit more complex. In order to address this, let's make the callbacks take the entire mode, and call our new helper to tell whether the full or limited range RGB should be used. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-7-maxime@cerno.tech
2022-01-25drm/vc4: hdmi: Add full range RGB helperMaxime Ripard1-2/+10
We're going to need to tell whether we want to run with a full or limited range RGB output in multiple places in the code, so let's create a helper that will return whether we need with full range or not. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-6-maxime@cerno.tech
2022-01-25drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetryMaxime Ripard1-1/+1
The drm_hdmi_avi_infoframe_colorspace() function actually sets the colorimetry and extended_colorimetry fields in the hdmi_avi_infoframe structure with DRM_MODE_COLORIMETRY_* values. To make things worse, the hdmi_avi_infoframe structure also has a colorspace field used to signal whether an RGB or YUV output is being used. Let's remove the inconsistency and allow for the colorspace usage by renaming the function. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-2-maxime@cerno.tech
2021-11-18Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-8/+0
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-11-05drm/vc4: hdmi: Introduce a scdc_enabled flagMaxime Ripard1-10/+12
We currently rely on two functions, vc4_hdmi_supports_scrambling() and vc4_hdmi_mode_needs_scrambling() to determine if we should enable and disable the scrambler for any given mode. Since we might need to disable the controller at boot, we also always run vc4_hdmi_disable_scrambling() and thus call those functions without a mode yet, which in turns need to make some special casing in order for it to work. Instead of duplicating the check for whether or not we need to take care of the scrambler in both vc4_hdmi_enable_scrambling() and vc4_hdmi_disable_scrambling(), we can do that check only when we enable it and store whether or not it's been enabled in our private structure. We also need to initialize that flag at true to make sure we disable the scrambler at boot since we can't really know its state yet. This allows to simplify a bit that part of the driver, and removes one user of our copy of the CRTC adjusted mode outside of KMS (since vc4_hdmi_disable_scrambling() might be called from the hotplug interrupt handler). It also removes our last user of the legacy encoder->crtc pointer. Link: https://lore.kernel.org/r/20211025141113.702757-10-maxime@cerno.tech Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05drm/vc4: hdmi: Introduce an output_enabled flagMaxime Ripard1-4/+12
We currently poke at encoder->crtc in the ALSA code path to determine whether the HDMI output is enabled or not, and thus whether we should allow the audio output. However, that pointer is deprecated and shouldn't really be used by atomic drivers anymore. Since we have the infrastructure in place now, let's just create a flag that we toggle to report whether the controller is currently enabled and use that instead of encoder->crtc in ALSA. Link: https://lore.kernel.org/r/20211025141113.702757-9-maxime@cerno.tech Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05drm/vc4: hdmi: Check the device state in prepare()Maxime Ripard1-7/+28
Even though we already check that the encoder->crtc pointer is there during in startup(), which is part of the open() path in ASoC, nothing guarantees that our encoder state won't change between the time when we open the device and the time we prepare it. Move the sanity checks we do in startup() to a helper and call it from prepare(). Link: https://lore.kernel.org/r/20211025141113.702757-8-maxime@cerno.tech Fixes: 91e99e113929 ("drm/vc4: hdmi: Register HDMI codec") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05drm/vc4: hdmi: Prevent access to crtc->state outside of KMSMaxime Ripard1-12/+26
Accessing the crtc->state pointer from outside the modesetting context is not allowed. We thus need to copy whatever we need from the KMS state to our structure in order to access it. However, in the vc4 HDMI driver we do use that pointer in the ALSA code path, and potentially in the hotplug interrupt handler path. These paths both need access to the CRTC adjusted mode in order for the proper dividers to be set for ALSA, and the scrambler state to be reinstated properly for hotplug. Let's copy this mode into our private encoder structure and reference it from there when needed. Since that part is shared between KMS and other paths, we need to protect it using our mutex. Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/ Link: https://lore.kernel.org/r/20211025141113.702757-7-maxime@cerno.tech Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05drm/vc4: hdmi: Use a mutex to prevent concurrent framework accessMaxime Ripard1-6/+112
The vc4 HDMI controller registers into the KMS, CEC and ALSA frameworks. However, no particular care is done to prevent the concurrent execution of different framework hooks from happening at the same time. In order to protect against that scenario, let's introduce a mutex that relevant ALSA and KMS hooks will need to take to prevent concurrent execution. CEC is left out at the moment though, since the .get_modes and .detect KMS hooks, when running cec_s_phys_addr_from_edid, can end up calling CEC's .adap_enable hook. This introduces some reentrancy that isn't easy to deal with properly. The CEC hooks also don't share much state with the rest of the driver: the registers are entirely separate, we don't share any variable, the only thing that can conflict is the CEC clock divider setup that can be affected by a mode set. However, after discussing it, it looks like CEC should be able to recover from this if it was to happen. Link: https://lore.kernel.org/r/20211025141113.702757-6-maxime@cerno.tech Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05drm/vc4: hdmi: Add a spinlock to protect register accessMaxime Ripard1-10/+192
The vc4 HDMI driver has multiple path shared between the CEC, ALSA and KMS frameworks, plus two interrupt handlers (CEC and hotplug) that will read and modify a number of registers. Even though not bug has been reported so far, it's definitely unsafe, so let's just add a spinlock to protect the register access of the HDMI controller. Link: https://lore.kernel.org/r/20211025141113.702757-5-maxime@cerno.tech Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-04drm/vc4: hdmi: Enable the scrambler on reconnectionMaxime Ripard1-0/+3
If we have a state already and disconnect/reconnect the display, the SCDC messages won't be sent again since we didn't go through a disable / enable cycle. In order to fix this, let's call the vc4_hdmi_enable_scrambling function in the detect callback if there is a mode and it needs the scrambler to be enabled. Fixes: c85695a2016e ("drm/vc4: hdmi: Enable the scrambler") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-10-maxime@cerno.tech
2021-11-04drm/vc4: hdmi: Raise the maximum clock rateMaxime Ripard1-1/+1
Now that we have the infrastructure in place, we can raise the maximum pixel rate we can reach for HDMI0 on the BCM2711. HDMI1 is left untouched since its pixelvalve has a smaller FIFO and would need a clock faster than what we can provide to support the same modes. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211025152903.1088803-9-maxime@cerno.tech
2021-11-04drm/vc4: hdmi: Fix HPD GPIO detectionMaxime Ripard1-3/+3
Prior to commit 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod"), in the detect hook, if we had an HPD GPIO we would only rely on it and return whatever state it was in. However, that commit changed that by mistake to only consider the case where we have a GPIO and it returns a logical high, and would fall back to the other methods otherwise. Since we can read the EDIDs when the HPD signal is low on some displays, we changed the detection status from disconnected to connected, and we would ignore an HPD pulse. Fixes: 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-3-maxime@cerno.tech
2021-11-04drm/vc4: hdmi: Remove the DDC probing for status detectionMaxime Ripard1-2/+0
Commit 9d44abbbb8d5 ("drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.") added some code to read the EDID through DDC in the HDMI driver detect hook since the Pi3 had no HPD GPIO back then. However, commit b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of Expander") changed that a couple of years later. This causes an issue though since some TV (like the LG 55C8) when it comes out of standy will deassert the HPD line, but the EDID will remain readable. It causes an issues nn platforms without an HPD GPIO, like the Pi4, where the DDC probing will be our primary mean to detect a display, and thus we will never detect the HPD pulse. This was fine before since the pulse was small enough that we would never detect it, and we also didn't have anything (like the scrambler) that needed to be set up in the display. However, now that we have both, the display during the HPD pulse will clear its scrambler status, and since we won't detect the disconnect/reconnect cycle we will never enable the scrambler back. As our main reason for that DDC probing is gone, let's just remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-2-maxime@cerno.tech
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie1-8/+0
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-25drm/vc4: hdmi: Make sure the device is powered with CECMaxime Ripard1-1/+9
Similarly to what we encountered with the detect hook with DRM, nothing actually prevents any of the CEC callback from being run while the HDMI output is disabled. However, this is an issue since any register access to the controller when it's powered down will result in a silent hang. Let's make sure we run the runtime_pm hooks when the CEC adapter is opened and closed by the userspace to avoid that issue. Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-6-maxime@cerno.tech
2021-10-25drm/vc4: hdmi: Split the CEC disable / enable functions in twoMaxime Ripard1-30/+45
In order to ease further additions to the CEC enable and disable, let's split the function into two functions, one to enable and the other to disable. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-5-maxime@cerno.tech
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.