aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/xlnx (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-08-09drm/xlnx/zynqmp_disp: Fix incorrectly named enum 'zynqmp_disp_layer_id'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/xlnx/zynqmp_disp.c:101: warning: expecting prototype for enum zynqmp_disp_id. Prototype was for enum zynqmp_disp_layer_id instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09drm: xlnx: zynqmp_dpsub: Expose plane ordering to userspaceLaurent Pinchart1-0/+1
While the DPSUB has a fixed plane order, it still makes sense to expose it to userspace to avoid hardcoding assumptions. Do so by adding an immutable zpos property to planes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09drm: xlnx: zynqmp_dpsub: Add global alpha supportLaurent Pinchart1-2/+7
The graphics plane has a global alpha setting. Expose it through the plane's alpha property. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09drm: xlnx: zynqmp_dpsub: Fix graphics layer blendingLaurent Pinchart1-1/+11
To display the graphics layer, the global alpha needs to be enabled. Enable it when the graphics plane is enabled (with full opacity), and disable it otherwise. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09drm: xlnx: zynqmp_dpsub: Pass disp structure to all internal functionsLaurent Pinchart1-145/+121
The internal functions dealing with the audio/video buffer manager, the blender, and the audio mixer, all receive pointers to the respective objects. Those objects are embedded in the zynqmp_disp structure, and a very small. Treating them as separate objects would require expanding them with back-pointers to the zynqmp_disp in order to access fields such as the device pointer for debug messages, and this isn't worth it. Instead, merge those structures with the zynqmp_disp structure, and pass the zynqmp_disp pointer to all internal functions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09drm: xlnx: zynqmp: Add zynqmp_disp_layer_is_video() to simplify the codeQuanyang Wang1-17/+22
Add a new function zynqmp_disp_layer_is_video() to simplify the code that judges if a layer is the video layer. Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Renamed is_layer_vid() to zynqmp_disp_layer_is_video()]] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09drm: xlnx: zynqmp: release reset to DP controller before accessing DP registersQuanyang Wang1-10/+12
When insmod zynqmp-dpsub.ko after rmmod it, system will hang with the error log as below: root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko [ 88.391289] [drm] Initialized zynqmp-dpsub 1.0.0 20130509 for fd4a0000.display on minor 0 [ 88.529906] Console: switching to colour frame buffer device 128x48 [ 88.549402] zynqmp-dpsub fd4a0000.display: [drm] fb0: zynqmp-dpsubdrm frame buffer device [ 88.571624] zynqmp-dpsub fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed root@xilinx-zynqmp:~# rmmod zynqmp_dpsub [ 94.023404] Console: switching to colour dummy device 80x25 root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko <hang here> This is because that in zynqmp_dp_probe it tries to access some DP registers while the DP controller is still in the reset state. When running "rmmod zynqmp_dpsub", zynqmp_dp_reset(dp, true) in zynqmp_dp_phy_exit is called to force the DP controller into the reset state. Then insmod will call zynqmp_dp_probe to program the DP registers, but at this moment the DP controller hasn't been brought out of the reset state yet since the function zynqmp_dp_reset(dp, false) is called later and this will result the system hang. Releasing the reset to DP controller before any read/write operation to it will fix this issue. And for symmetry, move zynqmp_dp_reset() call from zynqmp_dp_phy_exit() to zynqmp_dp_remove(). Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09drm: xlnx: zynqmp_dpsub: Update dependencies for ZynqMP DPDylan Yip1-0/+2
ZynqMP DP requires the ZynqMP PHY and DPDMA to operate properly. So depend on both the PHY and DPDMA. Signed-off-by: Dylan Yip <dylan.yip@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09drm: xlnx: zynqmp_dpsub: Call pm_runtime_get_sync before setting pixel clockQuanyang Wang1-1/+2
The Runtime PM subsystem will force the device "fd4a0000.zynqmp-display" to enter suspend state while booting if the following conditions are met: - the usage counter is zero (pm_runtime_get_sync hasn't been called yet) - no 'active' children (no zynqmp-dp-snd-xx node under dpsub node) - no other device in the same power domain (dpdma node has no "power-domains = <&zynqmp_firmware PD_DP>" property) So there is a scenario as below: 1) DP device enters suspend state <- call zynqmp_gpd_power_off 2) zynqmp_disp_crtc_setup_clock <- configurate register VPLL_FRAC_CFG 3) pm_runtime_get_sync <- call zynqmp_gpd_power_on and clear previous VPLL_FRAC_CFG configuration 4) clk_prepare_enable(disp->pclk) <- enable failed since VPLL_FRAC_CFG configuration is corrupted From above, we can see that pm_runtime_get_sync may clear register VPLL_FRAC_CFG configuration and result the failure of clk enabling. Putting pm_runtime_get_sync at the very beginning of the function zynqmp_disp_crtc_atomic_enable can resolve this issue. Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-29drm/xlnx: Don't set struct drm_device.irq_enabledThomas Zimmermann1-2/+0
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in xlnx. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-27-tzimmermann@suse.de
2021-04-27drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay()Lyude Paul1-1/+1
So that we can start using drm_dbg_*() for drm_dp_link_train_channel_eq_delay() and drm_dp_lttpr_link_train_channel_eq_delay(). Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-7-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-27drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay()Lyude Paul1-1/+1
So that we can start using drm_dbg_*() in drm_dp_link_train_clock_recovery_delay(). Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-6-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-27drm/dp: Add backpointer to drm_device in drm_dp_auxLyude Paul1-0/+1
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so. Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux. v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-08drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train()Dan Carpenter1-1/+1
The dp->train_set[] for this driver is only two characters, not four so this memsets too much. Fortunately, this ends up corrupting a struct hole and not anything important. Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-14/+18
drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard1-1/+1
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard1-7/+7
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Store new plane state in a variable for atomic_update and disableMaxime Ripard1-3/+4
In order to store the new plane state in a subsequent helper, let's move the plane->state dereferences into a variable. This was done using the following coccinelle script, plus some hand changes for vmwgfx: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { + struct drm_plane_state *new_state = plane->state; <+... - plane->state + new_state ...+> } @ has_new_state_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { + struct drm_plane_state *new_plane_state = plane->state; <+... - plane->state + new_plane_state ...+> } @ has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { + struct drm_plane_state *new_s = plane->state; <+... - plane->state + new_s ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard1-2/+1
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard1-1/+3
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard1-4/+6
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-03drm/xlnx: fix kmemleak by sending vblank_event in atomic_disableQuanyang Wang1-8/+7
When running xrandr to change resolution of DP, the kmemleak as below can be observed: unreferenced object 0xffff00080a351000 (size 256): comm "Xorg", pid 248, jiffies 4294899614 (age 19.960s) hex dump (first 32 bytes): 98 a0 bc 01 08 00 ff ff 01 00 00 00 00 00 00 00 ................ ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e0bd0f69>] kmemleak_alloc+0x30/0x40 [<00000000cde2f318>] kmem_cache_alloc+0x3d4/0x588 [<0000000088ea9bd7>] drm_atomic_helper_setup_commit+0x84/0x5f8 [<000000002290a264>] drm_atomic_helper_commit+0x58/0x388 [<00000000f6ea78c3>] drm_atomic_commit+0x4c/0x60 [<00000000c8e0725e>] drm_atomic_connector_commit_dpms+0xe8/0x110 [<0000000020ade187>] drm_mode_obj_set_property_ioctl+0x1b0/0x450 [<00000000918206d6>] drm_connector_property_set_ioctl+0x3c/0x68 [<000000008d51e7a5>] drm_ioctl_kernel+0xc4/0x118 [<000000002a819b75>] drm_ioctl+0x214/0x448 [<000000008ca4e588>] __arm64_sys_ioctl+0xa8/0xf0 [<0000000034e15a35>] el0_svc_common.constprop.0+0x74/0x190 [<000000001b93d916>] do_el0_svc+0x24/0x90 [<00000000ce9230e0>] el0_svc+0x14/0x20 [<00000000e3607d82>] el0_sync_handler+0xb0/0xb8 [<000000003e79c15f>] el0_sync+0x174/0x180 This is because there is a scenario that a drm_crtc_commit commit is allocated but not freed. The drm subsystem require/release references to a CRTC commit by calling drm_crtc_commit_get/put, and when drm_crtc_commit_put find that commit.ref.refcount is zero, it will call __drm_crtc_commit_free to free this CRTC commit. Among these drm_crtc_commit_get/put pairs, there is a drm_crtc_commit_get in drm_atomic_helper_setup_commit as below: ... new_crtc_state->event->base.completion = &commit->flip_done; new_crtc_state->event->base.completion_release = release_crtc_commit; drm_crtc_commit_get(commit); ... This reference to the CRTC commit should be released at the function release_crtc_commit by calling e->completion_release(e->completion) in drm_send_event_locked. So we need to call drm_send_event_locked at two places: handling vblank event in the irq handler and the crtc disable helper. But in zynqmp_disp_crtc_atomic_disable, it only marks the flip is done and not call drm_crtc_commit_put. This result that the refcount of this commit is always non-zero and this commit will never be freed. Since the function drm_crtc_send_vblank_event has operations both sending a flip_done signal and releasing reference to the CRTC commit, let's use it instead. Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210202064121.173362-1-quanyang.wang@windriver.com
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-1/+1
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-03drm: Use the state pointer directly in atomic_checkMaxime Ripard1-3/+1
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the CRTC state. This was done using the following coccinelle script: @ crtc_atomic_func @ identifier helpers; identifier func; @@ static struct drm_crtc_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier crtc_atomic_func.func; identifier crtc, state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... when != crtc_state - crtc_state->state + state ... } @@ struct drm_crtc_state *crtc_state; identifier crtc_atomic_func.func; identifier crtc, state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - crtc_state->state + state ... } Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201102133834.1176740-3-maxime@cerno.tech
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-2/+2
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-11-02drm/atomic: Pass the full state to CRTC atomic_checkMaxime Ripard1-2/+4
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_check. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier ret, f; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <... - ret = FUNCS->atomic_check(crtc, crtc_state); + ret = FUNCS->atomic_check(crtc, state); ...> } @@ identifier crtc, new_state; @@ struct drm_crtc_helper_funcs { ... - int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state); + int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ static struct drm_crtc_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { ... when != new_state } @ adds_new_state depends on crtc_atomic_func && !ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ int func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ int func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier new_state; identifier crtc; @@ int func(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ); @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-maxime@cerno.tech
2020-10-28drm: xlnx: Use dma_request_chan for DMA channel requestPeter Ujfalusi1-3/+1
There is no need to use the of_dma_request_slave_channel() directly as dma_request_chan() is going to try to get the channel via OF as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201023094602.5630-1-peter.ujfalusi@ti.com
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard1-2/+4
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-09-25drm/xlnx: Initialize DRM driver instance with CMA helper macroThomas Zimmermann1-13/+1
The xlnx driver uses CMA helpers with default callback functions. Initialize the driver structure with the rsp CMA helper macro. The driver is being converted to use GEM object functions as part of this change. Two callbacks, .dumb_destroy and .gem_prime_import, were initialized to their default implementations, so they are just kept empty now. v2: * initialize with DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE (Laurent) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-22-tzimmermann@suse.de
2020-09-14Merge drm/drm-next into drm-misc-nextMaxime Ripard1-0/+1
Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic properly. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-09-12drm: xlnx: remove defined but not used 'scaling_factors_666'Jason Yan1-6/+0
This addresses the following gcc warning with "make W=1": drivers/gpu/drm/xlnx/zynqmp_disp.c:245:18: warning: ‘scaling_factors_666’ defined but not used [-Wunused-const-variable=] 245 | static const u32 scaling_factors_666[] = { | ^~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200910140630.1191782-1-yanaijie@huawei.com
2020-09-11drm/xlnx: Use devm_drm_dev_allocDaniel Vetter1-21/+6
Gets rid of drmm_add_final_kfree, which I want to unexport so that it stops confusion people about this transitional state of rolling drm managed memory out. This also fixes the missing drm_dev_put in the error path of the probe code. v2: Drop the misplaced drm_dev_put from zynqmp_dpsub_drm_init (all other paths leaked on error, this should have been in zynqmp_dpsub_probe), now that subsumed by the auto-cleanup of devm_drm_dev_alloc. Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20200907082225.150837-1-daniel.vetter@ffwll.ch
2020-09-05drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependencyLaurent Pinchart1-0/+1
The dpsub driver uses the DMA engine API, and thus selects DMA_ENGINE to provide that API. DMA_ENGINE depends on DMADEVICES, which can be deselected by the user, creating a possibly unmet indirect dependency: WARNING: unmet direct dependencies detected for DMA_ENGINE Depends on [n]: DMADEVICES [=n] Selected by [m]: - DRM_ZYNQMP_DPSUB [=m] && HAS_IOMEM [=y] && (ARCH_ZYNQMP || COMPILE_TEST [=y]) && COMMON_CLK [=y] && DRM [=m] && OF [=y] Add a dependency on DMADEVICES to fix this. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Randy Dunlap <rdunlap@infradead.org>
2020-08-01drm: xlnx: zynqmp: Use switch - case for link rate downshiftHyun Kwon1-13/+16
Use switch - case to downshift from the current link rate. It's a small loop now, so fine to be replaced with switch - case. With a loop, it is confusing and hard to follow as reported below. The patch d76271d22694: "drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem" from Jul 7, 2018, leads to the following static checker warning: drivers/gpu/drm/xlnx/zynqmp_dp.c:594 zynqmp_dp_mode_configure() error: iterator underflow 'bws' (-1)-2 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1596065445-4630-1-git-send-email-hyun.kwon@xilinx.com
2020-07-30drm: xlnx: Fix typo in parameter descriptionWei Yongjun1-1/+1
Fix typo in parameter description. Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200725063429.172139-1-weiyongjun1@huawei.com
2020-07-30drm: xlnx: fix spelling mistake "failes" -> "failed"Colin Ian King1-1/+1
There is a spelling mistake in a dev_dbg messages. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200724111258.14762-1-colin.king@canonical.com
2020-07-18drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort SubsystemHyun Kwon9-0/+4092
The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort Subsystem. It includes a buffer manager, a video pipeline renderer (blender), an audio mixer and a DisplayPort source controller (transmitter). The DMA engine the provide data to the buffer manager, as well as the DisplayPort PHYs that drive the lanes, are external to the subsystem and interfaced using the DMA engine and PHY APIs respectively. This driver supports the DisplayPort Subsystem and implements - Two planes, for graphics and video - One CRTC that supports alpha blending - One encoder for the DisplayPort transmitter - One connector for an external monitor It currently doesn't support - Color keying - Test pattern generation - Audio - Live input from the Programmable Logic (FPGA) - Output to the Programmable Logic (FPGA) Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.