aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2022-08-16drm/amd/display: Fix plug/unplug external monitor will hang while playback MPO videoTom Chung1-2/+9
[Why] Pipes for MPO primary and overlay will be power down and power up during plug/unplug external monitor while MPO video playback. But the pipes were the same after plug/unplug and should not need to be power down and power up or it will make page flip interrupt disabled and cause hang issue. [How] Add pipe split change condition that not only check the top pipe pointer but also check the index of top pipe if both top pipes are available. Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add debug parameter to retain default clock tableDaniel Miess3-2/+3
[Why] Need a way to retain default clock table to aid the investigation into why 8k@30 display not lighting up on dcn314 [How] Use flag to prevent execution of bw_params helper function and function for updating bw_bounding_box Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: Increase tlb flush timeout for sriovDusica Milinkovic3-3/+5
[Why] During multi-vf executing benchmark (Luxmark) observed kiq error timeout. It happenes because all of VFs do the tlb invalidation at the same time. Although each VF has the invalidate register set, from hardware side the invalidate requests are queue to execute. [How] In case of 12 VF increase timeout on 12*100ms Signed-off-by: Dusica Milinkovic <Dusica.Milinkovic@amd.com> Acked-by: Shaoyun Liu <shaoyun.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: do not compare integers of different widthsJosip Pavic1-1/+2
[Why & How] Increase width of some variables to avoid comparing integers of different widths. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add reserved dc_log_type.Ian Chen1-1/+3
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Fix pixel clock programmingIlya Bakoulin1-0/+2
[Why] Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned between different HDMI lanes when using YCbCr420 10-bit pixel format. BIOS functions for transmitter/encoder control take pixel clock in kHz increments, whereas the function for setting the pixel clock is in 100Hz increments. Setting pixel clock to a value that is not on a kHz boundary will cause the issue. [How] Round pixel clock down to nearest kHz in 10/12-bpc cases. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: 3.2.198Aric Cyr1-1/+1
This version brings along following fixes: -Fix edp panel missing event -Set ARGB16161616 pixel format to 26 -Fix dcn32 interger issue -Clear optc underflow bit after ODM clock off -Fix issue with stereo3D -Fix DML2 lightup issue -Correct DTBCLK for dcn314 -Revert for a regression -Fix clocks and bugs in DML2 -Enable SubVP by defalut on DCN32 & DCN321 -Corret boundary condition for engin ID on DCN303 -Fix FRL encoder override registry key -Fix VPG for dcn314 HPO -Fix Linux compile-time warning -Add new prefetch modes in DML for DCN32 Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: reverted limiting vscsdp_for_colorimetry and ARGB16161616 pixel format additionEthan Wellenreiter5-12/+0
[WHY] Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green point failures in HDR10 DTN tests. The re-implementation of ARGB16161616 was to fix this however it did not actually fix this issue but a side effect of the issue. [HOW] Change ARGB16161616 pixel format to 26. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/pm: Enable GFXOFF feature for SMU IP v13.0.4Tim Huang1-2/+2
The driver needs to set EnableGfxImu message parameter to tell the PMFW to set the flag that enables the GFXOFF feature. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: enable IH Clock Gating for OSS IP v6.0.1Tim Huang1-0/+1
Enable AMD_CG_SUPPORT_IH_CG support. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdkfd: potential crash in kfd_create_indirect_link_prop()Dan Carpenter1-4/+7
This code has two bugs. If kfd_topology_device_by_proximity_domain() failed on the first iteration through the loop then "cpu_link" is uninitialized and should not be dereferenced. The second bug is that we cannot dereference a list iterator when it points to the list head. In other words, if we exit the list_for_each_entry() loop exits without hitting a break then "cpu_link" is not a valid pointer and should not be dereferenced. Fix both of these problems by setting "cpu_link" to NULL when it is invalid and non-NULL when it is valid. That makes it easier to test for valid vs invalid. Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdkfd: reserve 2 queues for sdma 6.0.1 in bitmapYifan Zhang1-1/+6
There is only one engine in sdma 6.0.1, the total number of reserved queues should be 2, reflect this number in bitmap as well. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: enable ATHUB IP v3.0.1 Clock GatingTim Huang1-0/+2
Enable AMD_CG_SUPPORT_ATHUB_MGCG and AMD_CG_SUPPORT_ATHUB_LS support. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: enable HDP IP v5.2.1 Clock GatingTim Huang1-0/+6
Enable AMD_CG_SUPPORT_HDP_MGCG and AMD_CG_SUPPORT_HDP_LS support. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: enable MMHUB IP v3.0.1 Clock GatingTim Huang1-0/+2
Enable AMD_CG_SUPPORT_MC_MGCG and AMD_CG_SUPPORT_MC_LS support. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: add ATHUB IP v3.0.1 Clock Gating supportTim Huang1-5/+37
Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating. The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1, so need to add IP version checking to use the right REG offset. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: add HDP IP v5.2.1 Clock Gating supportTim Huang1-0/+150
Add set/get_clockgating for HDP IP v5.2.1. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: add MMHUB IP v3.0.1 Clock Gating supportTim Huang1-3/+39
Add set/get_clockgating for MMHUB IP v3.0.1. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/pm: update the smu driver interface version for SMU IP v13.0.4Tim Huang1-1/+1
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdkfd: Fix mm reference in SVM eviction workerFelix Kuehling2-11/+7
Use the mm reference from the fence. This allows removing the svm_bo->svms pointer, which was problematic because we cannot assume that the struct kfd_process containing the svms is still allocated without holding a refcount on the process. Use mmget_not_zero to ensure the mm is still valid, and drop the svm_bo reference if it isn't. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/pm: add mode1 support on smu_v13_0_7Kenneth Feng1-0/+12
add mode1 support since it's missing on smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/amdgpu: add ih cg and hdp sd on smu_v13_0_7Kenneth Feng1-1/+4
add ih cg and hdp sd on smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/pm: add missing ->fini_xxxx interfaces for some SMU13 asicsEvan Quan2-0/+4
Without these, potential memory leak may be induced. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/pm: add missing ->fini_microcode interface for Sienna CichlidEvan Quan1-0/+1
To avoid any potential memory leak. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: disable 3DCGCG/CGLS temporarily due to stability issueEvan Quan1-0/+2
Some stability issues were reported with these features. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/nouveau/kms/nv140-: Disable interlacingLyude Paul1-1/+2
As it turns out: while Nvidia does actually have interlacing knobs on their GPU still pretty much no current GPUs since Volta actually support it. Trying interlacing on these GPUs will result in NVDisplay being quite unhappy like so: nouveau 0000:1f:00.0: disp: chid 0 stat 00004802 reason 4 [INVALID_ARG] mthd 2008 data 00000001 code 00080000 nouveau 0000:1f:00.0: disp: chid 0 stat 10005080 reason 5 [INVALID_STATE] mthd 0200 data 00000001 code 00000001 So let's fix this by following the same behavior Nvidia's driver does and disable interlacing entirely. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220816180436.156310-1-lyude@redhat.com
2022-08-16i2c: Make remove callback return voidUwe Kleine-König30-91/+31
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16drm/i2c/sil164: Drop no-op remove functionUwe Kleine-König1-7/+0
A remove callback that just returns 0 is equivalent to no callback at all as can be seen in i2c_device_remove(). So simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16drm/i915/backlight: split out backlight registers to a separate fileJani Nikula7-112/+129
Declutter i915_reg.h by splitting backlight registers to a separate file. Also include the utility pin definitions, even though they are used for non-backlight things too. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220815094838.3511723-1-jani.nikula@intel.com
2022-08-15drm/msm/rd: Fix FIFO-full deadlockRob Clark1-0/+3
If the previous thing cat'ing $debugfs/rd left the FIFO full, then subsequent open could deadlock in rd_write() (because open is blocked, not giving a chance for read() to consume any data in the FIFO). Also it is generally a good idea to clear out old data from the FIFO. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/496706/ Link: https://lore.kernel.org/r/20220807160901.2353471-2-robdclark@gmail.com
2022-08-15drm/msm/gpu: Drop qos request if devm_devfreq_add_device() failsBjorn Andersson1-0/+2
In the event that devm_devfreq_add_device() fails the device's qos freq list is left referencing df->idle_freq and df->boost_freq. Attempting to initialize devfreq again after a probe deferral will then cause invalid memory accesses in dev_pm_qos_add_request(). Fix this by dropping the requests in the error path. Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/493001/ Link: https://lore.kernel.org/r/20220708162632.3529864-1-bjorn.andersson@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-08-15drm/hyperv: Fix an error handling path in hyperv_vmbus_probe()Christophe JAILLET1-3/+4
hyperv_setup_vram() calls vmbus_allocate_mmio(). This must be undone in the error handling path of the probe, as already done in the remove function. Fixes: a0ab5abced55 ("drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/7dfa372af3e35fbb1d6f157183dfef2e4512d3be.1659297696.git.christophe.jaillet@wanadoo.fr Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-08-15drm/i915/tc: Fix PHY ownership programming in HDMI legacy modeImre Deak1-2/+8
Make sure the TypeC PHY ownership flag is not getting reset during an HDMI modeset on the given port. Besides the WARN this triggered, it didn't cause other issues, since for TypeC legacy mode setting the PHY ownership flag is optional (there is no other user of the PHY besides display). Reported-and-tested-by: Shawn C Lee <shawn.c.lee@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220726134313.1484763-1-imre.deak@intel.com
2022-08-15drm/i915/xelpd: Fix unclaimed accesses while loading PIPEDMC-C/DImre Deak2-8/+30
At the moment on DG2 at least loading the DMC firmware's PIPEDMC C and D programs leads to sporadic unclaimed register accesses while programming the initial state as described by the firmware's "MMIO init" table. This will also lead to later unclaimed accesses for unrelated transcoder/pipe registers backed by the pipe C and D display power wells. Disabling the PIPEDMC clock gating during initialization - similarly to Wa_16015201720 fixed this problem in my tests. While pipe A an B requires the clock gating to be disabled all the time pipe C and D requires this only while accessing the PIPEDMC registers. Bspec: 49193 References: https://gitlab.freedesktop.org/drm/intel/-/issues/6526 References: https://gitlab.freedesktop.org/drm/intel/-/issues/6308 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220808103054.3586074-1-imre.deak@intel.com
2022-08-15drm/vc4: Drop of_gpio headerMaíra Canal1-1/+0
This driver includes the deprecated OF GPIO header <linux/of_gpio.h> yet fail to use symbols from it, so drop the include. Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220812205746.609107-6-mairacanal@riseup.net
2022-08-15drm/sun4i: dsi: Prevent underflow when computing packet sizesSamuel Holland1-5/+5
Currently, the packet overhead is subtracted using unsigned arithmetic. With a short sync pulse, this could underflow and wrap around to near the maximal u16 value. Fix this by using signed subtraction. The call to max() will correctly handle any negative numbers that are produced. Apply the same fix to the other timings, even though those subtractions are less likely to underflow. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220812031623.34057-1-samuel@sholland.org
2022-08-15drm/i915/gvt: Fix kernel-docJiapeng Chong1-2/+2
Fix the following W=1 kernel warnings: drivers/gpu/drm/i915/gvt/aperture_gm.c:308: warning: expecting prototype for inte_gvt_free_vgpu_resource(). Prototype was for intel_vgpu_free_resource() instead. drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: expecting prototype for intel_alloc_vgpu_resource(). Prototype was for intel_vgpu_alloc_resource() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220602073519.22363-1-jiapeng.chong@linux.alibaba.com Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2022-08-15drm/i915/gvt: Fix kernel-docJiapeng Chong1-1/+1
Fix the following W=1 kernel warnings: drivers/gpu/drm/i915/gvt/mmio_context.c:560: warning: expecting prototype for intel_gvt_switch_render_mmio(). Prototype was for intel_gvt_switch_mmio() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220524083733.67148-1-jiapeng.chong@linux.alibaba.com Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2022-08-15drm/i915/gvt: Fix kernel-docJiapeng Chong1-1/+1
Fix the following W=1 kernel warnings: drivers/gpu/drm/i915/gvt/handlers.c:3066: warning: expecting prototype for intel_t_default_mmio_write(). Prototype was for intel_vgpu_default_mmio_write() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220524083733.67148-2-jiapeng.chong@linux.alibaba.com Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2022-08-15drm/i915/gvt: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220521111145.81697-49-Julia.Lawall@inria.fr Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2022-08-11Merge tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-2/+3
Pull drm fixes from Dave Airlie: "Not much to squeeze into rc1, just two small fixes, one for core gem and one for shmem-helpers: gem: - Annotate WW context in error paths shmem-helper: - Add missing vunmap in error paths" * tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm: drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error drm/shmem-helper: Add missing vunmap on error
2022-08-11drm/msm/dsi: Fix number of regulators for SDM660Douglas Anderson1-1/+1
1 regulator is listed but the number 2 is specified. This presumably means we try to get a regulator with no name. Fix it. Fixes: 462f7017a691 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496323/ Link: https://lore.kernel.org/r/20220804073608.v4.2.I94b3c3e412b7c208061349f05659e126483171b1@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-08-11drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfgDouglas Anderson1-1/+1
3 regulators are listed but the number 2 is specified. Fix it. Fixes: 3a3ff88a0fc1 ("drm/msm/dsi: Add 8x96 info in dsi_cfg") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496318/ Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-08-11drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4Kuogee Hsieh1-1/+1
Data Symbols scrambled is required for tps4 at link training 2. Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to work. RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter measurement with minimal equipment for embedded applications purpose and is not required to be set during normal operation. Current implementation always have RECOVERED_CLOCK_OUT_EN bit set which cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent tps4 from working. This patch delete setting RECOVERED_CLOCK_OUT_EN to fix SCRAMBLING_DISABLE be wrongly set at tps4. Changes in v2: -- fix Fixes tag Changes in v3: -- revise commit text Changes in v4: -- fix commit text newline Changes in v5: -- fix commit text line over 75 chars Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/497194/ Link: https://lore.kernel.org/r/1660258670-4200-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-08-12Merge tag 'drm-misc-next-fixes-2022-08-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie2-2/+3
Short summary of fixes pull: * gem: Annotate WW context in error paths * shmem-helper: Add missing vunmap in error paths Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YvOLPpufsvOJHiNY@linux-uq9g
2022-08-11drm/i915: Use luminance range calculated during edid parsingJouni Högander1-2/+13
Instead of using fixed 0 - 512 range use luminance range calculated as a part of edid parsing. As a backup fall back to static 0 - 512. v3: Clean-ups suggested by Jani Nikula v2: Use values calculated during edid parsing Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-4-jouni.hogander@intel.com
2022-08-11drm/amdgpu_dm: Rely on split out luminance calculation functionJouni Högander1-31/+4
Luminance range calculation was split out into drm_edid.c and is now part of edid parsing. Rely on values calculated during edid parsing and use these for caps->aux_max_input_signal and caps->aux_min_input_signal. v2: Use values calculated during edid parsing Cc: Roman Li <roman.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-3-jouni.hogander@intel.com
2022-08-11drm: New function to get luminance range based on static hdr metadataJouni Högander1-1/+51
Split luminance min/max calculation using static hdr metadata from drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:update_connector_ext_caps into drm/drm_edid.c and use it during edid parsing. Calculated range is stored into connector->display_info->luminance_range. Add new data structure (drm_luminance_range_inf) to store luminance range calculated using data from EDID's static hdr metadata block. Add this new struct as a part of drm_display_info struct. v3: Squashed adding drm_luminance_range_info patch here v2: Calculate range during edid parsing Cc: Roman Li <roman.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-2-jouni.hogander@intel.com
2022-08-11drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node()Liang He1-0/+1
The reference 'child' in the iteration of for_each_available_child_of_node() is only escaped out into a local variable which is only used to check its value. So we still need to the of_node_put() when breaking of the for_each_available_child_of_node() which will automatically increase and decrease the refcount. Fixes: ca454bd42dc2 ("drm/pl111: Support the Versatile Express") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220711131550.361350-1-windhl@126.com
2022-08-11drm/bridge: tc358767: disable main link PHYs on main link disableLucas Stach1-1/+7
Disable the main link PHYs and put them into reset when the main link is disabled. When the PHYs stay enabled while the rest of the DP link circuits are disabled there is some noise on the data lanes, which some displays try to lock onto, waking them up from their low power state. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220706132812.2171250-3-l.stach@pengutronix.de
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.