aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2022-05-26drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162Alyssa Rosenzweig3-0/+7
Add handling for the HW_ISSUE_TTRX_2968_TTRX_3162 quirk. Logic ported from kbase. kbase lists this workaround as used on Mali-G57. Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220525145754.25866-3-alyssa.rosenzweig@collabora.com
2022-05-26drm: bridge: icn6211: Adjust clock phase using SYS_CTRL_1Jonathan Liu1-2/+16
The code from [1] sets SYS_CTRL_1 to different values depending on the desired clock phase (0, 1/4, 1/2 or 3/4). A clock phase of 0 aligns the positive edge of the clock with the pixel data while other values delay the clock by a fraction of the clock period. A clock phase of 1/2 aligns the negative edge of the clock with the pixel data. The driver currently hard codes SYS_CTRL_1 to 0x88 which corresponds to aligning the positive edge of the clock with the pixel data. This won't work correctly for panels that require aligning the negative edge of the clock with the pixel data. Adjust the clock phase to 0 if DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE is present in bus_flags, otherwise adjust the clock phase to 1/2 as appropriate for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE. [1] https://github.com/tdjastrzebski/ICN6211-Configurator Signed-off-by: Jonathan Liu <net147@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220523130144.444225-1-net147@gmail.com
2022-05-26drm: bridge: adv7511: Move CEC definitions to adv7511_cec.cFabio Estevam2-12/+12
ADV7511_REG_CEC_RX_FRAME_HDR[] and ADV7511_REG_CEC_RX_FRAME_LEN[] are only used inside adv7511_cec.c. Move their definitions to this file to avoid the following build warnings when CONFIG_DRM_I2C_ADV7511_CEC is not selected: drivers/gpu/drm/bridge/adv7511/adv7511.h:229:17: warning: 'ADV7511_REG_CEC_RX_FRAME_HDR' defined but not used [-Wunused-const-variable=] drivers/gpu/drm/bridge/adv7511/adv7511.h:235:17: warning: 'ADV7511_REG_CEC_RX_FRAME_LEN' defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot <lkp@intel.com> Fixes: ab0af093bf90 ("drm: bridge: adv7511: use non-legacy mode for CEC RX") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220525215316.1133057-1-festevam@gmail.com
2022-05-26drm/i915/gt: Fix memory leaks in per-gt sysfsAshutosh Dixit5-22/+19
All kmalloc'd kobjects need a kobject_put() to free memory. For example in previous code, kobj_gt_release() never gets called. The requirement of kobject_put() now results in a slightly different code organization. v2: s/gtn/gt/ (Andi) Fixes: b770bcfae9ad ("drm/i915/gt: create per-tile sysfs interface") Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a6f6686517c85fba61a0c45097f5bb4fe7e257fb.1653484574.git.ashutosh.dixit@intel.com
2022-05-26drm/i915/gt: Add media RP0/RPn to per-gt sysfsDale B Stimson2-0/+55
Retrieve RP0 and RPn freq for media IP from PCODE and display in per-gt sysfs. This patch adds the following files to gt/gtN sysfs: * media_RP0_freq_mhz * media_RPn_freq_mhz v2: Fixed commit author (Rodrigo) v3: Convert to new uncore interface for pcode functions v4: Adapt to intel_pcode.* function rename v5: #include "intel_pcode.h" in alphabetical order (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/45e34127a79e808f6582db8afb77f2f728a446e6.1653484574.git.ashutosh.dixit@intel.com
2022-05-26drm/i915/pcode: Init pcode on different gt'sAshutosh Dixit1-2/+18
Extend pcode initialization to pcode on different gt's. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4de1e4fd71a2971549c5cfb185412f190f15e235.1653484574.git.ashutosh.dixit@intel.com
2022-05-26drm/i915/gt: Add media freq factor to per-gt sysfsAshutosh Dixit6-0/+161
Expose new sysfs to program and retrieve media freq factor. Factor values of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point representation (corresponding to integer values of 0, 128 and 256 respectively). Media freq factor is converted to media_ratio_mode for GuC. It is programmed into GuC using H2G SLPC interface. It is retrieved from GuC through a register read. A cached media_ratio_mode is maintained to preserve set values across GuC resets. This patch adds the following sysfs files to gt/gtN sysfs: * media_freq_factor * media_freq_factor.scale v2: Minor wording change in drm_warn (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7ad7578335d8af9cba047b4bcf33d1887453d2e1.1653484574.git.ashutosh.dixit@intel.com
2022-05-25drm/i915/reset: Fix error_state_read ptr + offset useAlan Previn1-3/+12
Fix our pointer offset usage in error_state_read when there is no i915_gpu_coredump but buf offset is non-zero. This fixes a kernel page fault can happen when multiple tests are running concurrently in a loop and one is producing engine resets and consuming the i915 error_state dump while the other is forcing full GT resets. (takes a while to trigger). The dmesg call trace: [ 5590.803000] BUG: unable to handle page fault for address: ffffffffa0b0e000 [ 5590.803009] #PF: supervisor read access in kernel mode [ 5590.803013] #PF: error_code(0x0000) - not-present page [ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067 PTE 0 [ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U 5.17.0-rc5-ups69-guc-err-capt-rev6+ #136 [ 5590.803033] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00. 3031.A02.2201171222 01/17/2022 [ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10 [ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282 [ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00 RCX: 0000000000000f8f [ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000 RDI: ffff888107ee9071 [ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 5590.803069] R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000019 [ 5590.803073] R13: 0000000000174fff R14: 0000000000001000 R15: ffff888107ee9000 [ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000) knlGS:0000000000000000 [ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004 CR4: 0000000000770ee0 [ 5590.803089] PKRU: 55555554 [ 5590.803091] Call Trace: [ 5590.803093] <TASK> [ 5590.803096] error_state_read+0xa1/0xd0 [i915] [ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0 [ 5590.803180] new_sync_read+0x116/0x1a0 [ 5590.803185] vfs_read+0x114/0x1b0 [ 5590.803189] ksys_read+0x63/0xe0 [ 5590.803193] do_syscall_64+0x38/0xc0 [ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 5590.803201] RIP: 0033:0x7f62aaea5912 [ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000 RCX: 00007f62aaea5912 [ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f RDI: 0000000000000006 [ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010 R09: 0000000000101000 [ 5590.803229] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000006 [ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010 R15: 0000000000200000 [ 5590.803238] </TASK> [ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers nfnetlink br_netfilter overlay mei_pxp mei_hdcp x86_pkg_temp_thermal coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me mei fuse ip_tables x_tables crct10dif_pclmul e1000e crc32_pclmul ptp i2c_i801 ghash_clmulni_intel i2c_smbus pps_core [last unloa ded: ttm] [ 5590.803277] CR2: ffffffffa0b0e000 [ 5590.803280] ---[ end trace 0000000000000000 ]--- Fixes: 0e39037b3165 ("drm/i915: Cache the error string") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311004311.514198-2-alan.previn.teres.alexis@intel.com
2022-05-25Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1152-28837/+491169
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
2022-05-25Merge tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linuxLinus Torvalds3-5/+5
Pull Wstringop-overflow fixes from Gustavo Silva: "Fix some -Wstringop-overflow warnings when building with GCC-11. All the patches have been in linux-next during the last development cycle. This is part of the ongoing efforts to globally enable -Wstringop-overflow" * tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: drm/i915: Fix -Wstringop-overflow warning in call to intel_read_wm_latency() drm/amd/display: Fix Wstringop-overflow warnings in dc_link_dp.c scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
2022-05-25drm/i915/hwconfig: Future-proof platform checksMatt Roper1-1/+1
PVC also has a hwconfig table. Actually the current expectation is that all future platforms will have hwconfig, so let's just change the condition to an IP version check so that we don't need to keep updating this for each new platform that shows up. Cc: John Harrison <john.c.harrison@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220524235906.529771-1-matthew.d.roper@intel.com
2022-05-25drm/vkms: Update vkms_composer_worker documentationAndré Almeida1-1/+1
Since commit ba420afab565 ("drm/vkms: Bugfix racing hrtimer vblank handle") the work is scheduled at vkms_vblank_simulate() and since commit 5ef8100a3919 ("drm/vkms: flush crc workers earlier in commit flow") the work is flushed at vkms_atomic_commit_tail(). Update function commment to reflect that. Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220521191342.23520-1-andrealmeid@igalia.com
2022-05-25drm: use ENOMEM for drmm_kzalloc allocation failuresNiels Dossche1-1/+1
Other callers of drmm_kzalloc already return -ENOMEM on allocation failure. Change EINVAL to ENOMEM for consistency. Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220521234104.88410-1-dossche.niels@gmail.com
2022-05-25drm/i915/dg2: Support 4k@30 on HDMIVandita Kulkarni1-0/+32
This patch adds a fix to support 297MHz of dot clock by calculating the pll values using synopsis algorithm. This will help to support 4k@30 mode for HDMI monitors on DG2. v2: As per the algorithm, set MPLLB VCO range control bits to 3, in register SNPS_PHY_MPLLB_DIV for 297Mhz. (Matt) v3: Fix typo. (Ankit) Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220525080401.1253511-1-ankit.k.nautiyal@intel.com
2022-05-25drm/panfrost: Job should reference MMU not file_privSteven Price3-6/+7
For a while now it's been allowed for a MMU context to outlive it's corresponding panfrost_priv, however the job structure still references panfrost_priv to get hold of the MMU context. If panfrost_priv has been freed this is a use-after-free which I've been able to trigger resulting in a splat. To fix this, drop the reference to panfrost_priv in the job structure and add a direct reference to the MMU structure which is what's actually needed. Fixes: 7fdc48cc63a3 ("drm/panfrost: Make sure MMU context lifetime is not bound to panfrost_priv") Signed-off-by: Steven Price <steven.price@arm.com> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220519152003.81081-1-steven.price@arm.com
2022-05-24Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-12/+11
Pull page cache updates from Matthew Wilcox: - Appoint myself page cache maintainer - Fix how scsicam uses the page cache - Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS - Remove the AOP flags entirely - Remove pagecache_write_begin() and pagecache_write_end() - Documentation updates - Convert several address_space operations to use folios: - is_dirty_writeback - readpage becomes read_folio - releasepage becomes release_folio - freepage becomes free_folio - Change filler_t to require a struct file pointer be the first argument like ->read_folio * tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits) nilfs2: Fix some kernel-doc comments Appoint myself page cache maintainer fs: Remove aops->freepage secretmem: Convert to free_folio nfs: Convert to free_folio orangefs: Convert to free_folio fs: Add free_folio address space operation fs: Convert drop_buffers() to use a folio fs: Change try_to_free_buffers() to take a folio jbd2: Convert release_buffer_page() to use a folio jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio reiserfs: Convert release_buffer_page() to use a folio fs: Remove last vestiges of releasepage ubifs: Convert to release_folio reiserfs: Convert to release_folio orangefs: Convert to release_folio ocfs2: Convert to release_folio nilfs2: Remove comment about releasepage nfs: Convert to release_folio jfs: Convert to release_folio ...
2022-05-25Merge tag 'drm-intel-next-fixes-2022-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie11-51/+63
drm/i915 fixes for v5.19 merge window: - Build, sparse, UB, and CFI fixes - Variable scope fix - Audio pipe logging fix - ICL+ DSI NULL dereference fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sfozuj44.fsf@intel.com
2022-05-24drm/i915/hwconfig: Report no hwconfig support on ADL-NBalasubramani Vivekanandan1-1/+1
ADL-N being a subplatform of ADL-P, it lacks support for hwconfig table. Explicit check added to skip ADL-N. Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220523075116.207677-1-balasubramani.vivekanandan@intel.com
2022-05-24drm/panel: Fix build error when CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y && CONFIG_DRM_DISPLAY_HELPER=mGao Chao1-0/+2
If CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y && CONFIG_DRM_DISPLAY_HELPER=m, bulding fails: drivers/gpu/drm/panel/panel-samsung-atna33xc20.o: In function `atana33xc20_probe': panel-samsung-atna33xc20.c:(.text+0x744): undefined reference to `drm_panel_dp_aux_backlight' make: *** [vmlinux] Error 1 Let CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 select DRM_DISPLAY_DP_HELPER and CONFIG_DRM_DISPLAY_HELPER to fix this error. Fixes: 32ce3b320343 ("drm/panel: atna33xc20: Introduce the Samsung ATNA33XC20 panel") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Gao Chao <gaochao49@huawei.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220524024551.539-1-gaochao49@huawei.com
2022-05-24drm/i915/guc: XEHPSDV and PVC do not use HuCDaniele Ceraolo Spurio1-0/+4
Disable HuC loading since it is not used on these platforms. Cc: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-6-matthew.d.roper@intel.com
2022-05-24drm/i915/pvc: Add new BCS engines to GuC engine listMatt Roper2-1/+3
Initialize ADS system info to reflect the availability of new BCS engines Original-author: CQ Tang Cc: Stuart Summers <stuart.summers@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-5-matthew.d.roper@intel.com
2022-05-24drm/i915/pvc: Remove additional 3D flags from PIPE_CONTROLStuart Summers5-8/+38
Although we already strip 3D-specific flags from PIPE_CONTROL instructions when submitting to a compute engine, there are some additional flags that need to be removed when the platform as a whole lacks a 3D pipeline. Add those restrictions here. v2: - Replace LACKS_3D_PIPELINE checks with !HAS_3D_PIPELINE and add has_3d_pipeline to all platforms except PVC. (Lucas) Bspec: 47112 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-4-matthew.d.roper@intel.com
2022-05-24drm/i915/pvc: Add forcewake supportMatt Roper2-1/+143
Add PVC's forcewake ranges. v2: - Drop replicated comment completely; move general cleanup of the documentation to a separate patch. Bspec: 67609 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-3-matthew.d.roper@intel.com
2022-05-24drm/i915/uncore: Reorganize and document shadow and forcewake tablesMatt Roper1-45/+79
Let's reorganize some of the forcewake/shadow handling in intel_uncore.c and consolidate the cargo-cult comments on each table into more general comments that apply to all tables. We'll probably move forcewake handling to its own dedicated file in the near future and further enhance this with true kerneldoc. But this is a good intermediate step to help clarify the behavior a bit. Cc: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-2-matthew.d.roper@intel.com
2022-05-24vfio: remove VFIO_GROUP_NOTIFY_SET_KVMMatthew Rosato3-69/+20
Rather than relying on a notifier for associating the KVM with the group, let's assume that the association has already been made prior to device_open. The first time a device is opened associate the group KVM with the device. This fixes a user-triggerable oops in GVT. Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://lore.kernel.org/r/20220519183311.582380-2-mjrosato@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-24drm/i915: fix typos in commentsJulia Lawall4-4/+4
Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220521111145.81697-90-Julia.Lawall@inria.fr
2022-05-24drm/i915: Update tiled blits selftestBommu Krishnaiah2-43/+225
Update the selftest to include Tile 4 mode and switch to Tile 4 on platforms that supports Tile 4 but no Tile Y and vice versa. Also switch to XY_FAST_COPY_BLT on platforms that supports it. v4: update commit message to reflect the code changes properly. v3: add a function to find X-tile availability for a platform. v2: disable Tile X for iGPU in fastblit and fix checkpath --strict warnings. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5879 Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com> Co-developed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516082015.32020-1-nirmoy.das@intel.com
2022-05-23Merge tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds2-41/+11
Pull xen updates from Juergen Gross: - decouple the PV interface from kernel internals in the Xen scsifront/scsiback pv drivers - harden the Xen scsifront PV driver against a malicious backend driver - simplify Xen PV frontend driver ring page setup - support Xen setups with multiple domains created at boot time to tolerate Xenstore coming up late - two small cleanup patches * tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen: add support for initializing xenstore later as HVM domain xen: sync xs_wire.h header with upstream xen x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent xen/xenbus: eliminate xenbus_grant_ring() xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/xenbus: add xenbus_setup_ring() service function xen: update ring.h xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF xen/sound: switch xen_snd_front to use INVALID_GRANT_REF xen/drm: switch xen_drm_front to use INVALID_GRANT_REF xen/usb: switch xen-hcd to use INVALID_GRANT_REF ...
2022-05-23drm/nouveau/tegra: remove needless NULL checkGuo Zhengkui1-9/+5
There has already been NULL check in clk_prepare_enable() and clk_disable_unprepare(), so remove needless NULL check before calling them. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220519072950.128268-1-guozhengkui@vivo.com
2022-05-23drm/nouveau/mmu: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Lyude Paul <lyude@redhat.com> [also fix double space] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220521111145.81697-57-Julia.Lawall@inria.fr
2022-05-23drm/nouveau: clear output poll workers before nouveau_fbcon_destroy()Mark Menzynski1-0/+2
Resources needed for output poll workers are destroyed in nouveau_fbcon_fini() before output poll workers are cleared in nouveau_display_fini(). This means there is a time between fbcon_fini() and display_fini(), where if output poll happens, it crashes. This patch introduces another output poll clearing before fbcon resources are destroyed. BUG: KASAN: use-after-free in __drm_fb_helper_initial_config_and_unlock.cold+0x1f3/0x291 [drm_kms_helper] Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Menzynski <mmenzyns@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220523113541.10562-1-mmenzyns@redhat.com
2022-05-23Revert "drm/bridge: anx7625: Use DPI bus type"Robert Foss1-4/+4
This reverts commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1. This patch depends on the patches just aplied to the media tree, and will not build without them, which leaves drm-misc-next in a broken state. Let's revert the two latter patches until rc1 has been branched, and rc1 has been backmerged into drm-misc-next. Signed-off-by: Robert Foss <robert.foss@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220523161520.354687-1-robert.foss@linaro.org
2022-05-23drm/i915/d12+: Disable DMC firmware flip queue handlersImre Deak2-1/+133
Based on a bspec update the DMC firmware's flip queue handling events need to be disabled before enabling DC5/6. i915 doesn't use the flip queue feature atm, so disable it already after loading the firmware. This removes some overhead of the event handler which runs at a 1 kHz frequency. Bspec: 49193, 72486, 72487 v2: - Fix the DMC pipe A register offsets for GEN12. - Disable the events on DG2 only on pipe A..D . v3: (Lucas) - Add TODO: to clarify the disabling sequence on all D13+ - s/intel_dmc_has_fw_payload/has_dmc_id_fw/ - s/simple_flipq/flipq/ - s/_GEN12,_GEN13/TGL_,ADLP_/ - s/MAINDMC/DMC/ v4: - Only disable flip queues on TGL/DG2, as on other platforms the corresponding event handlers don't exist. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> # v1 Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220521130808.637449-1-imre.deak@intel.com
2022-05-23drm/i915: Rename block_size()/block_offset()Ville Syrjälä1-4/+4
Give block_size()/block_offset() a "raw_" prefix since they both operate on the "raw" (as in not duplicated) BDB block contents. What actually spurred this was a conflict between intel_bios.c block_size() vs. block_size() from blkdev.h. That only happened to me on a custom tree where we somehow manage to include blkdev.h into intel_bios.c. But I think the rename makes sense anyway to clarify the purpose of these functions. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220519140010.10600-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-05-23drm/st7735r: Fix module autoloading for Okaya RH128128TJavier Martinez Canillas1-0/+1
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was registered via OF. This means that the st7735r.ko module won't autoload if a DT has a node with a compatible "okaya,rh128128t" string. In that case, kmod expects a "MODALIAS=of:N*T*Cokaya,rh128128t" uevent but instead will get a "MODALIAS=spi:rh128128t", which is not present in the list of aliases: $ modinfo drivers/gpu/drm/tiny/st7735r.ko | grep alias alias: of:N*T*Cokaya,rh128128tC* alias: of:N*T*Cokaya,rh128128t alias: of:N*T*Cjianda,jd-t18003-t01C* alias: of:N*T*Cjianda,jd-t18003-t01 alias: spi:jd-t18003-t01 To workaround this issue, add in the SPI table an entry for that device. Fixes: d1d511d516f7 ("drm: tiny: st7735r: Add support for Okaya RH128128T") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220520091602.179078-1-javierm@redhat.com
2022-05-23drm/bridge: lt9611: Use both bits for HDMI sensingJohn Stultz1-1/+1
In commit 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing"), the bit flag used to detect HDMI cable connect was switched from BIT(2) to BIT(0) to improve compatibility with some monitors that didn't seem to set BIT(2). However, with that change, I've seen occasional issues where the detection failed, because BIT(2) was set, but not BIT(0). Unfortunately, as I understand it, the bits and their function was never clearly documented. So lets instead check both (BIT(2) | BIT(0)) when checking the register. Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: kernel-team@android.com Fixes: 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing") Signed-off-by: John Stultz <jstultz@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-2-jstultz@google.com
2022-05-23drm/bridge: lt9611: Consolidate detection logicJohn Stultz1-14/+8
This patch simply consolidates the duplicated detection functionality in the driver. Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: kernel-team@android.com Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: John Stultz <jstultz@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-1-jstultz@google.com
2022-05-23drm/bridge: anx7625: Add missing of_node_put for endpointMarek Vasut1-0/+1
Add of_node_put call on the endpoint node after it is not needed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220519112337.62198-1-marex@denx.de
2022-05-23drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalidMarek Vasut1-1/+1
Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de
2022-05-23drm/i915/dsi: fix VBT send packet port selection for ICL+Jani Nikula1-11/+22
The VBT send packet port selection was never updated for ICL+ where the 2nd link is on port B instead of port C as in VLV+ DSI. First, single link DSI needs to use the configured port instead of relying on the VBT sequence block port. Remove the hard-coded port C check here and make it generic. For reference, see commit f915084edc5a ("drm/i915: Changes related to the sequence port no for") for the original VLV specific fix. Second, the sequence block port number is either 0 or 1, where 1 indicates the 2nd link. Remove the hard-coded port C here for 2nd link. (This could be a "find second set bit" on DSI ports, but just check the two possible options.) Third, sanity check the result with a warning to avoid a NULL pointer dereference. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984 Cc: stable@vger.kernel.org # v4.19+ Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com (cherry picked from commit 08c59dde71b73a0ac94e3ed2d431345b01f20485)
2022-05-23Merge tag 'drm-intel-next-2022-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-gt-nextTvrtko Ursulin201-8523/+10276
drm/i915 drm-intel-next -> drm-intel-gt-next cross-merge sync Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> # Conflicts: # drivers/gpu/drm/i915/gt/intel_rps.c # drivers/gpu/drm/i915/i915_vma.c From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y1ywbh5y.fsf@intel.com
2022-05-23drm/amd/display: Move connector debugfs to drmBhanuprakash Modem3-31/+13
As drm_connector already have the display_info, instead of creating "output_bpc" debugfs in vendor specific driver, move the logic to the drm layer. This patch will also move "Current" bpc to the crtc debugfs from connector debugfs, since we are getting this info from crtc_state. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220519095149.3560034-4-bhanuprakash.modem@intel.com
2022-05-23drm/i915/display/debug: Expose crtc current bpc via debugfsBhanuprakash Modem1-0/+28
This new debugfs will expose the currently using bpc by crtc. It is very useful for verifying whether we enter the correct output color depth from IGT. This patch will also add the connector's max supported bpc to "i915_display_info" debugfs. Example: cat /sys/kernel/debug/dri/0/crtc-0/i915_current_bpc Current: 8 Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220519095149.3560034-3-bhanuprakash.modem@intel.com
2022-05-23drm/debug: Expose connector's max supported bpc via debugfsBhanuprakash Modem1-0/+21
It's useful to know the connector's max supported bpc for IGT testing. Expose it via a debugfs file on the connector "output_bpc". Example: cat /sys/kernel/debug/dri/0/DP-1/output_bpc V2: * Fix typo in comments (Harry) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220519095149.3560034-2-bhanuprakash.modem@intel.com
2022-05-23drm/i915/dsi: fix VBT send packet port selection for ICL+Jani Nikula1-11/+22
The VBT send packet port selection was never updated for ICL+ where the 2nd link is on port B instead of port C as in VLV+ DSI. First, single link DSI needs to use the configured port instead of relying on the VBT sequence block port. Remove the hard-coded port C check here and make it generic. For reference, see commit f915084edc5a ("drm/i915: Changes related to the sequence port no for") for the original VLV specific fix. Second, the sequence block port number is either 0 or 1, where 1 indicates the 2nd link. Remove the hard-coded port C here for 2nd link. (This could be a "find second set bit" on DSI ports, but just check the two possible options.) Third, sanity check the result with a warning to avoid a NULL pointer dereference. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984 Cc: stable@vger.kernel.org # v4.19+ Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com
2022-05-21drm/r128: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-2/+2
Fix: drivers/gpu/drm/r128/r128_cce.c: In function ‘r128_do_init_cce’: drivers/gpu/drm/r128/r128_cce.c:417:2: error: case label does not reduce to an integer constant case R128_PM4_64BM_64VCBM_64INDBM: ^~~~ drivers/gpu/drm/r128/r128_cce.c:418:2: error: case label does not reduce to an integer constant case R128_PM4_64PIO_64VCPIO_64INDPIO: ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220405151517.29753-5-bp@alien8.de
2022-05-21drm/bridge: tc358767: Make sure Refclk clock are enabledMarek Vasut1-7/+25
The Refclk may be supplied by SoC clock output instead of crystal oscillator, make sure the clock are enabled before any other action is performed with the bridge chip, otherwise it may either fail to operate at all, or miss reset GPIO toggle. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 7caff0fc4296e ("drm/bridge: tc358767: Add DPI to eDP bridge driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220520121543.11550-1-marex@denx.de
2022-05-21drm/bridge: tc358767: Report DSI-to-(e)DP as supportedMarek Vasut1-4/+1
The DSI-to-e(DP) mode is now supported, update the driver comment to reflect this. No functional change. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 3080c21a043ab ("drm/bridge: tc358767: Add DSI-to-(e)DP mode support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220519095137.11896-2-marex@denx.de
2022-05-21drm/bridge: tc358767: Handle dsi_lanes == 0 as invalidMarek Vasut1-1/+1
Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: bbfd3190b6562 ("drm/bridge: tc358767: Add DSI-to-DPI mode support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220519095137.11896-1-marex@denx.de
2022-05-21drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalidMarek Vasut1-1/+1
Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.