| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Current DP drivers have regulators, clocks, irq and phy are grouped
together within a function and executed not in a symmetric manner.
This increase difficulty of code maintenance and limited code scalability.
This patch divides the driver life cycle of operation into four states,
resume (including booting up), dongle plugin, dongle unplugged and suspend.
Regulators, core clocks and irq are grouped together and enabled at resume
(or booting up) so that the DP controller is armed and ready to receive HPD
plugin interrupts. HPD plugin interrupt is generated when a dongle plugs
into DUT (device under test). Once HPD plugin interrupt is received, DP
controller will initialize phy so that dpcd read/write will function and
following link training can be proceeded successfully. DP phy will be
disabled after main link is teared down at end of unplugged HPD interrupt
handle triggered by dongle unplugged out of DUT. Finally regulators, code
clocks and irq are disabled at corresponding suspension.
Changes in V2:
-- removed unnecessary dp_ctrl NULL check
-- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs
-- remove flip parameter out of dp_ctrl_irq_enable()
-- add fixes tag
Changes in V3:
-- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at
dp_display_host_init() for eDP
Changes in V4:
-- rewording commit text to match this commit changes
Changes in V5:
-- rebase on top of msm-next branch
Changes in V6:
-- delete flip variable
Changes in V7:
-- dp_ctrl_irq_enable/disabe() merged into dp_ctrl_reset_irq_ctrl()
Changes in V8:
-- add more detail comment regrading dp phy at dp_display_host_init()
Changes in V9:
-- remove set phy_initialized to false when -ECONNRESET detected
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately
if aux read
Changes in v12:
-- move dp_display_host_phy_exit() after dp_display_host_deinit()
Changes in v13:
-- do not execute phy_init until plugged_in interrupt for edp, same as DP.
Changes in v14:
-- remove redundant dp->core_initialized = false form dp_pm_suspend.
Changes in v15:
-- remove core_initialized flag check at both host_init and host_deinit
Changes in v16:
-- remove dp_display_host_phy_exit core_initialized=false at dp_pm_suspend
Changes in v17:
-- remove core_initialized checking before execute attention_cb()
Changes in v18:
-- remove core_initialized checking at dp_pm_suspend
Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The Qualcomm SM8350 platform comes with a single DisplayPort controller,
add support for this in the DisplayPort driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211228045934.1524865-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
dp_debug_init() always returns 0. So, make it a void function and simplify
the only caller accordingly.
While at it remove a useless 'rc' initialization in dp_debug_get()
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/dc2d6f535379dd38a5e3f9ba502f1f2b3d1f56b7.1640201523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The sc8180x has 2 DP and 1 eDP controllers, add support for these to the
DP driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211217002643.2305526-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
In the cleanup path of the MSM DP driver the DP driver's debugfs files
are destroyed by invoking debugfs_remove_recursive() on debug->root,
which during initialization has been set to minor->debugfs_root.
To allow cleaning up the DP driver's debugfs files either each dentry
needs to be kept track of or the files needs to be put in a subdirectory
which can be removed in one go.
By choosing to put the debugfs files in a subdirectory, based on the
name of the associated connector this also solves the problem that these
names would collide as support for multiple DP instances are introduced.
One alternative solution to the problem with colliding file names would
have been to put keep track of the individual files and put them under
the connector's debugfs directory. But while the drm_connector has been
allocated, its associated debugfs directory has not been created at the
time of initialization of the dp_debug.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211015231702.1784254-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Move clock/IO/hrtimer utility functions from msm_drv.c to new
msm_io_utils.c file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20220119221616.3089119-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
For newer devices which deprecate gpu-id and do matching based on
chip-id, we need this information in cmdstream dumps so that the
decoding tools know how to decode them.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220114185742.283539-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The round_pixclk() callback returns different rate only on MDP4 in HDMI
(DTV) case. Stop using this callback in other cases to simplify
mode_valid callbacks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220106070656.482882-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
With the reglog removal, msm_readl/_writel became single line wrappers
around readl/writel. Move those two wrappers and msm_rmw to msm_drv.h to
remove need for extra function calls when doing register writes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
msm_ioremap() functions take additional argument dbgname which is now
unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Register logging was used during early stages of msm driver development
to compare upstream and downstream register traces. However the tool was
never updated to work with mdp5 hardware. Later it was dropped
completely when Rob imported freedreno tools into mesa. All this makes
DRM_MSM_REGISTER_LOGGING irrelevant now, so it can be dropped.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Fix the following coccicheck warning:
./drivers/gpu/drm/msm/msm_debugfs.c: 132: 0-23: WARNING: shrink_fops
should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for
debugfs files.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211221144234.480618-1-deng.changcheng@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Reading the PIPECONF enable bit out from the hardware
in i9xx_set_pipeconf() on i830 is pointless as the bit should
always be set since we keep both pipes constantly running on
i830. Drop the pointless read and just always keep the bit set.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
The CHV CGM CSC registers are single buffered and so we
may have to write them from the vblank worker, which
imposes very tight dealines. Drop the pointless locking
for the register accessess to reduce the overhead.
All the other registers we bash from the vblank worker
(LUTs) were already made lockless earlier.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
The pipe/output CSC register writes don't need to be locked
since all the registers are suitably isolated to their own
cachelines. So eliminate the locks to reduce the overhead
during the vblank evade critical section.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
We don't want any RMWs in the part of the commit that happens
under vblank evasion. Eventually we want to use the DSB to
handle that and it can't read registers at all. Also reads
are just slowing us down needlessly.
Let's move the whole PIPE_CHICKEN stuff out from the critical
section since we don't have anything there that needs to be
syncrhonized with other plane/pipe registers. If we ever need
to add such things then we have to move it back, but without
doing any reads.
TODO: should look into eliminating the RMW anyway...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
PSR2 workaround required when mode has delayed vblank.
BSpec: 52890
BSpec: 49421
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210185223.95399-2-jose.souza@intel.com
|
|
Grouping inside of the same if all the programing sequences and
workarounds of PSR2.
The order of programing changed in intel_psr_enable_source() but
it will not affect PSR2 as at this point PSR2_ENABLE is still disabled.
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210185223.95399-1-jose.souza@intel.com
|
|
A new programming step was added to combo and TC PLL sequences.
If override_AFC_startup is set in VBT, driver should overwrite
AFC_startup value to 0x0 or 0x7 in PLL's div0 register.
The current understating is that only TGL needs this and all other
display 12 and newer platforms will have a older VBT or a newer VBT
with override_AFC_startup set to 0 but in any case there is a
drm_warn_on_once() to let us know if this is not true.
v2:
- specification updated, now AFC can be override to 0x0 or 0x7
- not using a union for div0 (Imre)
- following previous wrong vbt naming: bits instead of bytes (Imre)
BSpec: 49204
BSpec: 20122
BSpec: 49968
BSpec: 71360
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216134059.25348-1-jose.souza@intel.com
|
|
BIOS may leave a TypeC PHY in a connected state even though the
corresponding port is disabled. This will prevent any hotplug events
from being signalled (after the monitor deasserts and then reasserts its
HPD) until the PHY is disconnected and so the driver will not detect a
connected sink. Rebooting with the PHY in the connected state also
results in a system hang.
Fix the above by disconnecting TypeC PHYs on disabled ports.
Before commit 64851a32c463e5 the PHY connected state was read out even
for disabled ports and later the PHY got disconnected as a side effect
of a tc_port_lock/unlock() sequence (during connector probing), hence
recovering the port's hotplug functionality.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014
Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state")
Cc: <stable@vger.kernel.org> # v5.16+
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com
|
|
Without DRM_GEM_CMA_HELPER i.MX8MQ DCSS won't build. This needs to be
there.
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216212228.1217831-1-rudi@heitbaum.com
|
|
The variable should obviously be local, not static.
Fixes: a421d8a99216 ("drm/i915/dp: rewrite DP 2.0 128b/132b link training based on errata")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217083938.3587465-1-jani.nikula@intel.com
|
|
Use REG_GENMASK() & co. for ilk+ watermark registers.
v2: Stick to the current bitmask sizes (Jani)
Fix "watermarm" typo (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-4-ville.syrjala@linux.intel.com
|
|
No reason the high level intel_update_crtc() needs to know
that there is something magical about the commit order of
planes between different platforms. So let's hide that
detail even better.
In order to keep to somewhat consistent naming between
things we shall call this intel_crtc_planes_update_arm()
to match the plane->update_arm() vfunc naming convention.
And let's rename the noarm counterpart to
intel_crtc_planes_update_noarm() to more clearly associate
it with the plane->update_noarm() vfunc.
v2: Change the naming convention a bit
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-2-ville.syrjala@linux.intel.com
|
|
Give names to the SSKPD/MLTR fields, and use the
REG_GENMASK* and REG_FIELD_GET*.
Also drop the bogus non-mirrored SSKP register define.
v2: Rebase due to intel_mchbar_regs.h
Leave gen6_check_mch_setup() in place for the moment
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-3-ville.syrjala@linux.intel.com
|
|
We need to use phy_name() to convert the PHY value into a human-readable
character in the error message.
Fixes: a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215163545.2175730-1-matthew.d.roper@intel.com
|
|
Registers that belong to the shared render/compute reset domain need to
be placed on an engine workaround list to ensure that they are properly
re-applied whenever any RCS or CCS engine is reset, even if the
registers do not belong to a specific engine's MMIO range. We have a
number of workarounds today that are incorrectly implemented on the 'gt'
workaround list and need to be moved accordingly. We also have one
workaround (Wa_22012532006) that is incorrectly implemented on the
context workaround list, even though the register it is adjusting is not
part of the RCS engine's context image; it must also be moved.
We'll have some workaround refactoring coming in the near future that
deals with registers in the reset domain in a more clear way. But in
the meantime, we should just move these workarounds to
rcs_engine_wa_init() to place them on the RCS engine's workaround list.
All production DG2 platforms will have an RCS engine (it's never fused
off) so these registers will be properly restored after a domain reset
triggered via an RCS engine _or_ a CCS engine.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.s@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215235531.2236399-1-matthew.d.roper@intel.com
|
|
Clang warns:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_packet_manager_v9.c:267:3:
error: implicit conversion from enumeration type 'enum
mes_map_queues_extended_engine_sel_enum' to different enumeration type
'enum mes_unmap_queues_extended_engine_sel_enum'
[-Werror,-Wenum-conversion]
extended_engine_sel__mes_map_queues__sdma0_to_7_sel :
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Use 'extended_engine_sel__mes_unmap_queues__sdma0_to_7_sel' to eliminate
the warning, which is the same numeric value of the proper type.
Fixes: 009e9a158505 ("drm/amdkfd: navi2x requires extended engines to map and unmap sdma queues")
Link: https://github.com/ClangBuiltLinux/linux/issues/1596
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
this patch adds gc 10.3.6 support.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
this patch adds support for gmc10.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add below supports:
GFX Coarse Grain Clock Gating(CGCG)
GFX Coarse grain light sleep/deep sleep(CGLS)
GFX Medium Grain Clock Gating(MGCG)
GFX Medium Grain light sleep/deep sleep(MGLS)
GFX Fine Grain Clock Gating(FGCG)
RLC MGLS
CP MGLS
MMHUB Clock Gating
SDMA Clock Gating
HDP Clock Gating
ATHUB Clock Gating
IH Clock Gating
GFX Power Gating
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds add nv common init for gc 10.3.6.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When we disable manual clock setting, we need to restore the cclks
as well as the gfxclk.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clang build fails with
amdgpu_ras.c:2416:7: error: variable 'ras_obj' is used uninitialized
whenever 'if' condition is true
if (adev->in_suspend || amdgpu_in_reset(adev)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
amdgpu_ras.c:2453:6: note: uninitialized use occurs here
if (ras_obj->ras_cb)
^~~~~~~
There is a logic error in the error handler's labels.
ex/ The sysfs: is the last goto label in the normal code but
is the middle of error handler. Rework the error handler.
cleanup: is the first error, so it's handler should be last.
interrupt: is the second error, it's handler is next. interrupt:
handles the failure of amdgpu_ras_interrupt_add_hander() by
calling amdgpu_ras_interrupt_remove_handler(). This is wrong,
remove() assumes the interrupt has been setup, not torn down by
add(). Change the goto label to cleanup.
sysfs is the last error, it's handler should be first. sysfs:
handles the failure of amdgpu_ras_sysfs_create() by calling
amdgpu_ras_sysfs_remove(). But when the create() fails there
is nothing added so there is nothing to remove. This error
handler is not needed. Remove the error handler and change
goto label to interrupt.
Fixes: b293e891b057 ("drm/amdgpu: add helper function to do common ras_late_init/fini (v3)")
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Dynamically initialize IP instance attributes. This eliminates bugs
stemming from adding new attributes to an IP instance.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Reported-by: Tom StDenis <tom.stdenis@amd.com>
Fixes: 4d7ba312dd1f ("drm/amdgpu: Add "harvest" to IP discovery sysfs")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Needed by umr to detect if ip discovered ASIC is an APU or not.
(v2): Remove asic type from packet it's not strictly needed
(v3): Correct comment
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The `program_aspm` callback is already guarded for aspm, but the
`enable_aspm` callback doesn't follow the module parameter.
Update it to use the helper `amdgpu_device_should_use_aspm`.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Evaluating `pcie_aspm_enabled` as part of driver probe has the implication
that if one PCIe bridge with an AMD GPU connected doesn't support ASPM
then none of them do. This is an invalid assumption as the PCIe core will
configure ASPM for individual PCIe bridges.
Create a new helper function that can be called by individual dGPUs to
react to the `amdgpu_aspm` module parameter without having negative results
for other dGPUs on the PCIe bus.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix this ARM warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:664:35: warning: format '%ld'
expects argument of type 'long int', but argument 4 has type 'size_t' {aka
'unsigned int'} [-Wformat=]
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: kbuild-all@lists.01.org
Cc: linux-kernel@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a6c40b178092 ("drm/amdgpu: Show IP discovery in sysfs")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM
by default but a variety of hardware configurations it turns out that this
caused a regression.
* PPC64LE hardware does not support ASPM at a hardware level.
CONFIG_PCIEASPM is often disabled on these architectures.
* Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem
disables it
Check with the PCIe subsystem to see that ASPM has been enabled
or not.
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907
Tested-by: koba.ko@canonical.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Define amdgpu_ras_block_late_init_default in amdgpu_ras.c as
.ras_late_init common function, which is called when
.ras_late_init of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_init to
initialize .ras_late_init in ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Define amdgpu_ras_late_init to call all ras blocks' .ras_late_init.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Move calling ras block instance members from module internal
function to the top calling xxx_ras_late_init.
2. Module internal function calls can only use parameter variables
of xxx_ras_late_init instead of ras block instance members.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove redundant calls of ras_late_init in mca ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove redundant calls of ras_late_init in mmhub ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove redundant calls of ras_late_init in hdp ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Modify .ras_late_init function pointer parameter so that
it can remove redundant intermediate calls in some ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add 3.1.6 DCE IP and assign relevant sw DM function for the new DCE.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add core DC implementation for DCN316.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize DMUB for DCN316. Use same funcs as DCN31 for
DCN316.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Kuogee Hsieh
Bjorn Andersson
Christophe JAILLET
Dmitry Baryshkov
Rob Clark
Changcheng Deng
Ville Syrjälä
José Roberto de Souza
Imre Deak
Rudi Heitbaum
Jani Nikula
Matt Roper
Srinivasan Shanmugam
Nathan Chancellor
Yifan Zhang
Alex Deucher
Tom Rix
Luben Tuikov
Tom St Denis
Mario Limonciello
yipechai
Prike Liang
Hansen Dsouza
Leo Li