aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2013-03-20net: au1k_ir: Use module_platform_driver()Sachin Kamat1-12/+1
module_platform_driver macro removes some boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20net: s6gmac: Use module_platform_driver()Sachin Kamat1-14/+1
module_platform_driver macro removes some boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20net: ks8695net: Use module_platform_driver()Sachin Kamat1-19/+1
module_platform_driver macro removes some boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20connector: Added coredumping event to the process connectorJesper Derehag4-1/+40
Process connector can now also detect coredumping events. Main aim of patch is get notified at start of coredumping, instead of having to wait for it to finish and then being notified through EXIT event. Could be used for instance by process-managers that want to get notified as soon as possible about process failures, and not necessarily beeing notified after coredump, which could be in the order of minutes depending on size of coredump, piping and so on. Signed-off-by: Jesper Derehag <jderehag@hotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20gianfar: Refactor config coalescing calls for all queuesClaudiu Manoil3-6/+10
The only place where gfar_configure_coalescing is called with an actual bitmask (other than 0xff) is in gfar_poll (on the hot path). So make gfar_configure_coalescing() static for the buffer processing path, and export gfar_configure_coalescing_all() for the remaining cases that require to set coalescing for all the queues at once (on the slow path). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20gianfar: Remove redundant programming of [rt]xic registersClaudiu Manoil1-12/+12
For Multi Q Multi Group (MQ_MG_MODE) mode, the Rx/Tx colescing registers [rt]xic are aliased with the [rt]xic0 registers (coalescing setting regs for Q0). This avoids programming twice in a row the coalescing registers for the Rx/Tx hw Q0. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20gianfar: Poll only active Rx queuesClaudiu Manoil2-10/+22
Split the napi budget fairly among the active queues only, instead of dividing it by the total number of Rx queues assigned to the given interrupt group. Use the h/w indication field RXFi in rstat (receive status register) to identify the active rx queues from the current interrupt group (i.e. receive event occured on ring i, if ring i is part of the current interrupt group). This indication field in rstat, RXFi i=0..7, allows us to find out on which queues of the same interrupt group do we have incomming traffic once we entered the polling routine for the given interrupt group. After servicing the ring i, the corresponding bit RXFi will be written with 1 to clear the active queue indication for that ring. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20gianfar: Fix tx napi pollingClaudiu Manoil1-37/+45
There are 2 issues with the current napi poll routine, with regards to tx ring cleanup: 1) for multi-queue devices (MQ_MG_MODE), should tx_bit_map != rx_bit_map, which is possible (and supported in h/w) if the DT property "fsl,tx-bit-map" holds a different value than rx_bit_map, the current polling routine will service the wrong Tx queues in this case (i.e. the interrupt group will receive interrupts from tx queues that it will not service) 2) Tx cleanup completion consumes napi budget, whereas the napi budget should be reserved for Rx work only. The patch fixes these issues and provides a clean napi polling routine. Napi poll completion is reached when all the Rx queues have been serviced and there is no Tx work to do. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20filter: add ANC_PAY_OFFSET instruction for loading payload start offsetDaniel Borkmann3-1/+8
It is very useful to do dynamic truncation of packets. In particular, we're interested to push the necessary header bytes to the user space and cut off user payload that should probably not be transferred for some reasons (e.g. privacy, speed, or others). With the ancillary extension PAY_OFFSET, we can load it into the accumulator, and return it. E.g. in bpfc syntax ... ld #poff ; { 0x20, 0, 0, 0xfffff034 }, ret a ; { 0x16, 0, 0, 0x00000000 }, ... as a filter will accomplish this without having to do a big hackery in a BPF filter itself. Follow-up JIT implementations are welcome. Thanks to Eric Dumazet for suggesting and discussing this during the Netfilter Workshop in Copenhagen. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20net: flow_dissector: add __skb_get_poff to get a start offset to payloadDaniel Borkmann2-0/+59
__skb_get_poff() returns the offset to the payload as far as it could be dissected. The main user is currently BPF, so that we can dynamically truncate packets without needing to push actual payload to the user space and instead can analyze headers only. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20net: fix psock_fanout selftest hash collisionWillem de Bruijn1-40/+120
Fix flaky results with PACKET_FANOUT_HASH depending on whether the two flows hash into the same packet socket or not. Also adds tests for PACKET_FANOUT_LB and PACKET_FANOUT_CPU and replaces the counting method with a packet ring. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20net: fec: Define indexes as 'unsigned int'Fabio Estevam1-3/+3
Fix the following warnings that happen when building with W=1 option: drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_free_buffers': drivers/net/ethernet/freescale/fec.c:1337:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers': drivers/net/ethernet/freescale/fec.c:1361:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_init': drivers/net/ethernet/freescale/fec.c:1631:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20net/irda: add missing error path release_sock callKees Cook1-2/+4
This makes sure that release_sock is called for all error conditions in irda_getsockopt. Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Brad Spengler <spender@grsecurity.net> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20lpc_eth: fix error return code in lpc_eth_drv_probe()Wei Yongjun1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20sh_eth: check TSU registers ioremap() errorSergei Shtylyov1-0/+5
One must check the result of ioremap() -- in this case it prevents potential kernel oops when initializing TSU registers further on... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20sh_eth: fix bitbang memory leakSergei Shtylyov2-0/+6
sh_mdio_init() allocates pointer to 'struct bb_info' but only stores it locally, so that sh_mdio_release() can't free it on driver unload. Add the pointer to 'struct bb_info' to 'struct sh_eth_private', so that sh_mdio_init() can save 'bitbang' variable for sh_mdio_release() to be able to free it later... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20ipconfig: Fix newline handling in log message.Martin Fuzzey1-1/+2
When using ipconfig the logs currently look like: Single name server: [ 3.467270] IP-Config: Complete: [ 3.470613] device=eth0, hwaddr=ac:de:48:00:00:01, ipaddr=172.16.42.2, mask=255.255.255.0, gw=172.16.42.1 [ 3.480670] host=infigo-1, domain=, nis-domain=(none) [ 3.486166] bootserver=172.16.42.1, rootserver=172.16.42.1, rootpath= [ 3.492910] nameserver0=172.16.42.1[ 3.496853] ALSA device list: Three name servers: [ 3.496949] IP-Config: Complete: [ 3.500293] device=eth0, hwaddr=ac:de:48:00:00:01, ipaddr=172.16.42.2, mask=255.255.255.0, gw=172.16.42.1 [ 3.510367] host=infigo-1, domain=, nis-domain=(none) [ 3.515864] bootserver=172.16.42.1, rootserver=172.16.42.1, rootpath= [ 3.522635] nameserver0=172.16.42.1, nameserver1=172.16.42.100 [ 3.529149] , nameserver2=172.16.42.200 Fix newline handling for these cases Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20flow_keys: include thoff into flow_keys for later usageDaniel Borkmann2-0/+3
In skb_flow_dissect(), we perform a dissection of a skbuff. Since we're doing the work here anyway, also store thoff for a later usage, e.g. in the BPF filter. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: unhash l2tp sessions on delete, not on freeTom Parkin3-50/+38
If we postpone unhashing of l2tp sessions until the structure is freed, we risk: 1. further packets arriving and getting queued while the pseudowire is being closed down 2. the recv path hitting "scheduling while atomic" errors in the case that recv drops the last reference to a session and calls l2tp_session_free while in atomic context As such, l2tp sessions should be unhashed from l2tp_core data structures early in the teardown process prior to calling pseudowire close. For pseudowires like l2tp_ppp which have multiple shutdown codepaths, provide an unhash hook. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: avoid deadlock in l2tp stats updateTom Parkin5-147/+93
l2tp's u64_stats writers were incorrectly synchronised, making it possible to deadlock a 64bit machine running a 32bit kernel simply by sending the l2tp code netlink commands while passing data through l2tp sessions. Previous discussion on netdev determined that alternative solutions such as spinlock writer synchronisation or per-cpu data would bring unjustified overhead, given that most users interested in high volume traffic will likely be running 64bit kernels on 64bit hardware. As such, this patch replaces l2tp's use of u64_stats with atomic_long_t, thereby avoiding the deadlock. Ref: http://marc.info/?l=linux-netdev&m=134029167910731&w=2 http://marc.info/?l=linux-netdev&m=134079868111131&w=2 Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: push all ppp pseudowire shutdown through .release handlerTom Parkin1-43/+10
If userspace deletes a ppp pseudowire using the netlink API, either by directly deleting the session or by deleting the tunnel that contains the session, we need to tear down the corresponding pppox channel. Rather than trying to manage two pppox unbind codepaths, switch the netlink and l2tp_core session_close handlers to close via. the l2tp_ppp socket .release handler. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: purge session reorder queue on deleteTom Parkin1-0/+4
Add calls to l2tp_session_queue_purge as a part of l2tp_tunnel_closeall and l2tp_session_delete. Pseudowire implementations which are deleted only via. l2tp_core l2tp_session_delete calls can dispense with their own code for flushing the reorder queue. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: add session reorder queue purge function to coreTom Parkin2-0/+18
If an l2tp session is deleted, it is necessary to delete skbs in-flight on the session's reorder queue before taking it down. Rather than having each pseudowire implementation reaching into the l2tp_session struct to handle this itself, provide a function in l2tp_core to purge the session queue. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: don't BUG_ON sk_socket being NULLTom Parkin1-8/+10
It is valid for an existing struct sock object to have a NULL sk_socket pointer, so don't BUG_ON in l2tp_tunnel_del_work if that should occur. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: take a reference for kernel sockets in l2tp_tunnel_sock_lookupTom Parkin1-0/+2
When looking up the tunnel socket in struct l2tp_tunnel, hold a reference whether the socket was created by the kernel or by userspace. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: close sessions before initiating tunnel deleteTom Parkin1-0/+1
When a user deletes a tunnel using netlink, all the sessions in the tunnel should also be deleted. Since running sessions will pin the tunnel socket with the references they hold, have the l2tp_tunnel_delete close all sessions in a tunnel before finally closing the tunnel socket. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: close sessions in ip socket destroy callbackTom Parkin2-0/+13
l2tp_core hooks UDP's .destroy handler to gain advance warning of a tunnel socket being closed from userspace. We need to do the same thing for IP-encapsulation sockets. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: export l2tp_tunnel_closeallTom Parkin2-2/+3
l2tp_core internally uses l2tp_tunnel_closeall to close all sessions in a tunnel when a UDP-encapsulation socket is destroyed. We need to do something similar for IP-encapsulation sockets. Export l2tp_tunnel_closeall as a GPL symbol to enable l2tp_ip and l2tp_ip6 to call it from their .destroy handlers. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20l2tp: add udp encap socket destroy handlerTom Parkin1-0/+14
L2TP sessions hold a reference to the tunnel socket to prevent it going away while sessions are still active. However, since tunnel destruction is handled by the sock sk_destruct callback there is a catch-22: a tunnel with sessions cannot be deleted since each session holds a reference to the tunnel socket. If userspace closes a managed tunnel socket, or dies, the tunnel will persist and it will be neccessary to individually delete the sessions using netlink commands. This is ugly. To prevent this occuring, this patch leverages the udp encapsulation socket destroy callback to gain early notification when the tunnel socket is closed. This allows us to safely close the sessions running in the tunnel, dropping the tunnel socket references in the process. The tunnel socket is then destroyed as normal, and the tunnel resources deallocated in sk_destruct. While we're at it, ensure that l2tp_tunnel_closeall correctly drops session references to allow the sessions to be deleted rather than leaking. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20udp: add encap_destroy callbackTom Parkin3-0/+16
Users of udp encapsulation currently have an encap_rcv callback which they can use to hook into the udp receive path. In situations where a encapsulation user allocates resources associated with a udp encap socket, it may be convenient to be able to also hook the proto .destroy operation. For example, if an encap user holds a reference to the udp socket, the destroy hook might be used to relinquish this reference. This patch adds a socket destroy hook into udp, which is set and enabled in the same way as the existing encap_rcv hook. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20genetlink: trigger BUG_ON if a group name is too longMasatake YAMATO1-0/+1
Trigger BUG_ON if a group name is longer than GENL_NAMSIZ. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20netfilter: remove unused "config IP_NF_QUEUE"Paul Bolle1-13/+0
Kconfig symbol IP_NF_QUEUE is unused since commit d16cf20e2f2f13411eece7f7fb72c17d141c4a84 ("netfilter: remove ip_queue support"). Let's remove it too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-03-19net: Get rid of compat defines in psock_fanout.c selftest.David S. Miller1-18/+0
Reported-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19PCI: Use ROM images from firmware only if no other ROM source availableMatthew Garrett1-20/+35
Mantas Mikulėnas reported that his graphics hardware failed to initialise after commit f9a37be0f02a ("x86: Use PCI setup data"). The aim of this commit was to ensure that ROM images were available on some Apple systems that don't expose the GPU ROM via any other source. In this case, UEFI appears to have provided a broken ROM image that we were using even though there was a perfectly valid ROM available via other sources. The simplest way to handle this seems to be to just re-order pci_map_rom() and leave any firmare-supplied ROM to last. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-19net: Fix failure string in net-socket selftests Makefile.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19packet: packet fanout rollover during socket overloadWillem de Bruijn7-24/+451
Changes: v3->v2: rebase (no other changes) passes selftest v2->v1: read f->num_members only once fix bug: test rollover mode + flag Minimize packet drop in a fanout group. If one socket is full, roll over packets to another from the group. Maintain flow affinity during normal load using an rxhash fanout policy, while dispersing unexpected traffic storms that hit a single cpu, such as spoofed-source DoS flows. Rollover breaks affinity for flows arriving at saturated sockets during those conditions. The patch adds a fanout policy ROLLOVER that rotates between sockets, filling each socket before moving to the next. It also adds a fanout flag ROLLOVER. If passed along with any other fanout policy, the primary policy is applied until the chosen socket is full. Then, rollover selects another socket, to delay packet drop until the entire system is saturated. Probing sockets is not free. Selecting the last used socket, as rollover does, is a greedy approach that maximizes chance of success, at the cost of extreme load imbalance. In practice, with sufficiently long queues to absorb bursts, sockets are drained in parallel and load balance looks uniform in `top`. To avoid contention, scales counters with number of sockets and accesses them lockfree. Values are bounds checked to ensure correctness. Tested using an application with 9 threads pinned to CPUs, one socket per thread and sufficient busywork per packet operation to limits each thread to handling 32 Kpps. When sent 500 Kpps single UDP stream packets, a FANOUT_CPU setup processes 32 Kpps in total without this patch, 270 Kpps with the patch. Tested with read() and with a packet ring (V1). Also, passes psock_fanout.c unit test added to selftests. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19sparc: remove unused "config BITS"Paul Bolle1-6/+0
sparc's asm/module.h got removed in commit 786d35d45cc40b2a51a18f73e14e135d47fdced7 ("Make most arch asm/module.h files use asm-generic/module.h"). That removed the only two uses of this Kconfig symbol. So we can remove its entry too. > >From arch/sparc/Makefile: > ifeq ($(CONFIG_SPARC32),y) > [...] > > [...] > export BITS := 32 > [...] > > else > [...] > > [...] > export BITS := 64 > [...] > > So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not. > Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That > doesn't count as usage of "config BITS". Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19sparc: delete "if !ULTRA_HAS_POPULATION_COUNT"Paul Bolle1-1/+1
Commit 2d78d4beb64eb07d50665432867971c481192ebf ("[PATCH] bitops: sparc64: use generic bitops") made the default of GENERIC_HWEIGHT depend on !ULTRA_HAS_POPULATION_COUNT. But since there's no Kconfig symbol with that name, this always evaluates to true. Delete this dependency. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19net: Add socket() system call self test.David S. Miller4-0/+121
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORSPaul Bolle2-12/+0
The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm entry for that symbol. It got removed in v2.6.39 because it wasn't actually used anywhere. There are still no users of DEBUG_ERRORS so remove this entry too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [catalin.marinas@arm.com: removed option from defconfig] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-03-19arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATEDPaul Bolle1-1/+0
Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit 78c89825649a9a5ed526c507603196f467d781a5 ("genirq: Remove the now obsolete config options and select statements"), but the select was accidentally reintroduced in commit 8c2c3df31e3b87cb5348e48776c366ebd1dc5a7a ("arm64: Build infrastructure"). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-03-19xfrm: use xfrm direction when lookup policyBaker Zhang1-2/+21
because xfrm policy direction has same value with corresponding flow direction, so this problem is covered. In xfrm_lookup and __xfrm_policy_check, flow_cache_lookup is used to accelerate the lookup. Flow direction is given to flow_cache_lookup by policy_to_flow_dir. When the flow cache is mismatched, callback 'resolver' is called. 'resolver' requires xfrm direction, so convert direction back to xfrm direction. Signed-off-by: Baker Zhang <baker.zhang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19inet: limit length of fragment queue hash table bucket listsHannes Frederic Sowa5-16/+44
This patch introduces a constant limit of the fragment queue hash table bucket list lengths. Currently the limit 128 is choosen somewhat arbitrary and just ensures that we can fill up the fragment cache with empty packets up to the default ip_frag_high_thresh limits. It should just protect from list iteration eating considerable amounts of cpu. If we reach the maximum length in one hash bucket a warning is printed. This is implemented on the caller side of inet_frag_find to distinguish between the different users of inet_fragment.c. I dropped the out of memory warning in the ipv4 fragment lookup path, because we already get a warning by the slab allocator. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19net/smsc911x: Use NULL instead of integer for pointerSachin Kamat1-1/+1
Silences the following sparse warning: drivers/net/ethernet/smsc/smsc911x.c:2145:30: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19qeth: Fix scatter-gather regressionFrank Blaschka3-8/+42
This patch fixes a scatter-gather regression introduced with commit 5640f768 net: use a per task frag allocator Now the qeth driver can cope with bigger framents and split a fragment in sub framents if required. Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19qeth: Fix invalid router settings handlingStefan Raspl2-6/+13
Give a bad return code when specifying a router setting that is either invalid or not support on the respective device type. In addition, fall back the previous setting instead of silently switching back to 'no routing'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19qeth: delay feature traceStefan Raspl1-1/+1
Delay tracing of the card features until the optional commands have been enabled. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Fix byte-order of IEEE addressAlan Ott1-1/+1
Load the 64-bit Extended (IEEE) address into the hardware in the proper byte order. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Increase max SPI speed to 10MHzAlan Ott1-3/+2
Upon consulting the datasheet further, it does indicates a maximum speed for SCK at 10MHz. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Warn if transmit interrupts timeoutAlan Ott1-0/+1
Issue a warning if a transmit complete interrupt doesn't happen in time. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.