aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-08drm: Nuke drm_atomic_helper_connector_set_propertyDaniel Vetter15-72/+1
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_helper_connector_set_property. The only special case is nouveau which used one function for both pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2 vtables. But amounts to exactly the same. What is rather strange here is how few drivers set this up, I suspect the earlier patch to handle properties in the core did end up fixing a pile of possible issues. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.ch Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-08-08drm: Nuke drm_atomic_helper_plane_set_propertyDaniel Vetter18-75/+1
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_plane_set_property. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-08-08drm: Nuke drm_atomic_helper_crtc_set_propertyDaniel Vetter8-63/+0
It's dead code because this is now handled in the core. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-5-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-08-08drm: Handle properties in the core for atomic driversDaniel Vetter7-39/+153
The reason behind the original indirection through the helper functions was to allow existing drivers to overwrite how they handle properties. For example when a vendor-specific userspace had expectations that didn't match atomic. That seemed likely, since atomic is standardizing a _lot_ more of the behaviour of a kms driver. But 20 drivers later there's no such need at all. Worse, this forces all drivers to hook up the default behaviour, breaking userspace if they forget to do that. And it forces us to export a bunch of core function just for those helpers. And finally, these helpers are the last places using drm_atomic_legacy_backoff() and the implicit acquire_ctx. This patch here just implements the new behaviour and updates the docs. Follow-up patches will garbage-collect all the dead code. v2: Fixup docs even better! v3: Make it actually work ... v4: Drop the uses_atomic_modeset() checks from the previous patch again, since they're now moved up in the callchain. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> (v3) Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725120204.2107-1-daniel.vetter@ffwll.ch
2017-08-08drm: Don't update property values for atomic driversDaniel Vetter5-27/+33
Atomic drivers only use the property value store for immutable (i.e. can't be set by userspace, but the kernel can still adjust it) properties. The only tricky part is the removal of the update in drm_atomic_helper_update_legacy_modeset_state(). This was added in commit 8c10342cb48f3140d9abeadcfd2fa6625d447282 (tag: topic/drm-misc-2015-07-28) Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Jul 27 13:24:29 2015 +0200 drm/atomic: Update legacy DPMS state during modesets, v3. by copying it from the i915 code, where it was originally added in commit 68d3472047a572936551f8ff0b6f4016c5a1fdef Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Sep 6 22:08:35 2012 +0200 drm/i915: update dpms property in set_mode for the legacy modeset code. The reason we needed this hack was that i915 didn't yet set DRIVER_ATOMIC, and we checked for that instead of the newer-ish drm_drv_uses_atomic_modeset(), which avoids such troubles. With the correct feature checks this isn't needed anymore at all. Also make sure that drivers don't accidentally get this wrong by making the exported version of drm_object_property_get_value() only work for legacy drivers. Only gma500 uses it anyway. v2: Fixup the uses_atomic_modeset() checks (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725120137.1903-1-daniel.vetter@ffwll.ch
2017-08-08drm/omap: Rework the rotation-on-crtc hackMaarten Lankhorst1-39/+85
I want/need to rework the core property handling, and this hack is getting in the way. But since it's a non-standard propety only used by legacy userspace we know that this will only every be called from ioctl code. And never on some other free-standing state struct, where this old hack wouldn't work either. v2: don't forget zorder and get_property! v3: Shadow the legacy state to avoid locking issues in get_property (Maarten). v4: Review from Laurent - Move struct omap_crtc_state into omap_crtc.c - Clean up comments. - Don't forget to copy the shadowed state over on duplicate. v5: Don't forget to update the reset handler (Maarten). v6: Update omap_crtc_state shadow values in omap_crtc_atomic_check (Maarten). v7: - Fix get_property to return 0 and set value in *val (Maarten). - Update comment in set_property for changes in v6 (Maarten). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v4) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> (v4) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a6a10a4f-2ebc-5f81-00bd-5e906967f384@linux.intel.com
2017-08-08drm/radeon: Use the drm_driver.dumb_destroy defaultNoralf Trønnes1-1/+0
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-16-git-send-email-noralf@tronnes.org
2017-08-08drm/i915: Use the drm_driver.dumb_destroy defaultNoralf Trønnes1-1/+0
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-12-git-send-email-noralf@tronnes.org
2017-08-08drm/sti: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes1-2/+0
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-5-git-send-email-noralf@tronnes.org
2017-08-08drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHYJose Abreu1-0/+1
Currently HDMI 2.0 PHYs do not have a default configuration function. As *some* of the HDMI 2.0 PHYs have the same register layout as the 3D PHYs we can provide the same default configuration function for both and still let user overwrite this with custom configuration function if needed. If, for some reason, the PHY is custom or has a register different register layout then custom configuration function *must* be provided in order for the system to work correctly. As we prefer the pdata provided configuration function over the internal one this change will not make any impact in custom platforms. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Tested-by: Mark Yao <mark.yao@rock-chips.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Heiko Stübner <heiko@sntech.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/185ccf7d4473fa557044732402ca20b3d4007952.1498209896.git.joabreu@synopsys.com
2017-08-07drm/fb-helper: pass physical dimensions to fbdevDavid Lechner1-2/+15
The fbdev subsystem has a place for physical dimensions (width and height in mm) that is readable by userspace. Since DRM also knows these dimensions, pass this information to the fbdev device. This has to be done in drm_setup_crtcs_fb() instead of drm_setup_crtcs() because fb_helper->fbdev may be NULL in drm_setup_crtcs(). Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1501863924-7154-1-git-send-email-david@lechnology.com
2017-08-07drm/bridge: dw-hdmi: remove CEC engine register definitionsRussell King1-45/+0
We don't need the CEC engine register definitions, so let's remove them. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170802184108.7913-5-hverkuil@xs4all.nl
2017-08-07drm/bridge: dw-hdmi: add cec driverRussell King6-1/+398
Add a CEC driver for the dw-hdmi hardware. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [hans.verkuil: unsigned -> unsigned int] [hans.verkuil: cec_transmit_done -> cec_transmit_attempt_done] [hans.verkuil: add missing CEC_CAP_PASSTHROUGH] Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170802184108.7913-4-hverkuil@xs4all.nl
2017-08-07drm/bridge: dw-hdmi: add missing cec_notifier_putHans Verkuil1-0/+3
The __dw_hdmi_remove() function was missing a call to cec_notifier_put to balance the cec_notifier_get in the probe function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/a7688d13-2d61-ed16-f2df-28cbb5007f38@xs4all.nl
2017-08-07drm: dw-hdmi-i2s: add missing company name on CopyrightKuninori Morimoto1-1/+2
This driver's Copyright is under Renesas Solutions Corp. This patch updates the year, because this driver was moved into synopsys folder in 2017. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/87tw1khvnq.wl%kuninori.morimoto.gx@renesas.com
2017-08-04drm/bridge: dw-hdmi: add better clock disable controlRussell King1-11/+18
The video setup path aways sets the clock disable register to a specific value, which has the effect of disabling the CEC engine. When we add the CEC driver, this becomes a problem. Fix this by only setting/clearing the bits that the video path needs to. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBha-00088l-DE@rmk-PC.armlinux.org.uk
2017-08-04drm/bridge: dw-hdmi: add cec notifier supportRussell King2-1/+22
Add CEC notifier support to the HDMI bridge driver, so that the CEC part of the IP can receive its physical address. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBhV-00088e-8x@rmk-PC.armlinux.org.uk
2017-08-04drm/tinydrm: remove call to mipi_dbi_init() from mipi_dbi_spi_init()David Lechner2-14/+11
This removes the call to mipi_dbi_init() from mipi_dbi_spi_init() so that drivers can have a driver-specific implementation if needed. Suggested-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/1501799630-1650-2-git-send-email-david@lechnology.com
2017-08-04drm/fsl-dcu: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes1-2/+0
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-8-git-send-email-noralf@tronnes.org
2017-08-04drm: stm: remove dead code and pointless local lut storagePeter Rosin2-13/+0
The redundant fb helper .load_lut is no longer used, and can not work right without also providing the fb helpers .gamma_set and .gamma_get thus rendering the code in this driver suspect. Just remove the dead code. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-14-peda@axentia.se
2017-08-04drm: radeon: remove dead code and pointless local lut storagePeter Rosin6-53/+33
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-13-peda@axentia.se
2017-08-04drm: nouveau: remove dead code and pointless local lut storagePeter Rosin4-69/+22
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-12-peda@axentia.se
2017-08-04drm: mgag200: remove dead code and pointless local lut storagePeter Rosin3-54/+15
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-11-peda@axentia.se
2017-08-04drm: i915: remove dead code and pointless local lut storagePeter Rosin2-32/+0
The driver stores lut values from the fbdev interface, and is able to give them back, but does not appear to do anything with these lut values. The generic fb helpers have replaced this function, and may even have made the driver work for the C8 mode from the fbdev interface. But that is untested. Since the fb helpers .gamma_set and .gamma_get are obsolete, remove the dead code. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-10-peda@axentia.se
2017-08-04drm: gma500: remove dead code and pointless local lut storagePeter Rosin4-50/+12
The redundant fb helpers .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-9-peda@axentia.se
2017-08-04drm: cirrus: remove dead code and pointless local lut storagePeter Rosin3-65/+16
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-8-peda@axentia.se
2017-08-04drm: ast: remove dead code and pointless local lut storagePeter Rosin3-41/+6
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-7-peda@axentia.se
2017-08-04drm: armada: remove dead empty functionsPeter Rosin3-14/+0
The redundant fb helpers .gamma_set and .gamma_get are no longer used. Remove the dead code. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-6-peda@axentia.se
2017-08-04drm: amd: remove dead code and pointless local lut storagePeter Rosin7-128/+28
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-5-peda@axentia.se
2017-08-04drm/rockchip: fix race with kms hotplug and fbdevMark yao1-7/+6
According to the kerneldoc[0], should do fbdev setup before calling drm_kms_helper_poll_init(), otherwise, Kms hotplug event may race into fbdev helper initial, and fb_helper->dev may be NULL pointer, that would cause the bug: [ 0.735411] [00000200] *pgd=00000000f6ffe003, *pud=00000000f6ffe003, *pmd=0000000000000000 [ 0.736156] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.736648] Modules linked in: [ 0.736930] CPU: 2 PID: 20 Comm: kworker/2:0 Not tainted 4.4.41 #20 [ 0.737480] Hardware name: Rockchip RK3399 Board rev2 (BOX) (DT) [ 0.738020] Workqueue: events cdn_dp_pd_event_work [ 0.738447] task: ffffffc0f21f3100 ti: ffffffc0f2218000 task.ti: ffffffc0f2218000 [ 0.739109] PC is at mutex_lock+0x14/0x44 [ 0.739469] LR is at drm_fb_helper_hotplug_event+0x30/0x114 [ 0.756253] [<ffffff8008a344f4>] mutex_lock+0x14/0x44 [ 0.756260] [<ffffff8008445708>] drm_fb_helper_hotplug_event+0x30/0x114 [ 0.756271] [<ffffff8008473c84>] rockchip_drm_output_poll_changed+0x18/0x20 [ 0.756280] [<ffffff8008439fcc>] drm_kms_helper_hotplug_event+0x28/0x34 [ 0.756286] [<ffffff800846c444>] cdn_dp_pd_event_work+0x394/0x3c4 [ 0.756295] [<ffffff80080b2b38>] process_one_work+0x218/0x3e0 [ 0.756302] [<ffffff80080b3538>] worker_thread+0x2e8/0x404 [ 0.756308] [<ffffff80080b7e70>] kthread+0xe8/0xf0 [ 0.756316] [<ffffff8008082690>] ret_from_fork+0x10/0x40 [0]: https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms-helpers.html Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Sandy huang <sandy.huang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501575103-20136-1-git-send-email-mark.yao@rock-chips.com
2017-08-04drm/rockchip: vop: report error when check resource errorMark yao1-1/+3
The user would be confused while facing a error commit without any error report. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Sandy huang <sandy.huang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501494596-7090-1-git-send-email-mark.yao@rock-chips.com
2017-08-04drm/rockchip: vop: round_up pitches to word alignMark yao1-2/+2
VOP pitch register is word align, need align to word. VOP_WIN0_VIR: bit[31:16] win0_vir_stride_uv Number of words of Win0 uv Virtual width bit[15:0] win0_vir_width Number of words of Win0 yrgb Virtual width ARGB888 : win0_vir_width RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3) RGB565 : ceil(win0_vir_width/2) YUV : ceil(win0_vir_width/4) Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Sandy huang <sandy.huang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501494591-7034-1-git-send-email-mark.yao@rock-chips.com
2017-08-04drm/rockchip: vop: fix NV12 video display errorMark yao1-0/+3
fixup the scale calculation formula on the case src_height == (dst_height/2). Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Sandy huang <sandy.huang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501494586-6984-1-git-send-email-mark.yao@rock-chips.com
2017-08-04drm/rockchip: vop: fix iommu page fault when resumeMark yao1-18/+15
Iommu would get page fault with following path: vop_disable: 1, disable all windows and set vop config done 2, vop enter to standy, all windows not works, but their registers are not clean, when you read window's enable bit, may found the window is enable. vop_enable: 1, memcpy(vop->regsbak, vop->regs, len) save current vop registers to vop->regsbak, then you can found window is enable on regsbak. 2, VOP_WIN_SET(vop, win, gate, 1); force enable window gate, but gate and enable are on same hardware register, then window enable bit rewrite to vop hardware. 3, vop power on, and vop might try to scan destroyed buffer, then iommu get page fault. Move windows disable after vop regsbak restore, then vop regsbak mechanism would keep tracing the modify, everything would be safe. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Sandy huang <sandy.huang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501494582-6934-1-git-send-email-mark.yao@rock-chips.com
2017-08-04drm/rockchip: vop: no need wait vblank on crtc enableMark yao1-36/+0
Since atomic framework, crtc enable and disable are in pairs, no need to wait vblank. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Sandy huang <sandy.huang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501494577-6884-1-git-send-email-mark.yao@rock-chips.com
2017-08-03drm/fb-helper: add new drm_setup_crtcs_fb() functionDavid Lechner1-12/+18
This adds a new drm_setup_crtcs_fb() function to handle the parts of drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When drm_setup_crtcs() is called during initialization, these fields are NULL because they have not been allocated yet. There is currently a hack at the end of drm_fb_helper_single_fb_probe() that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb() function. This is also done in preparation for addition setup that requires access to fb_helper->fbdev. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1501777149-8310-2-git-send-email-david@lechnology.com
2017-08-03drm/atmel-hlcdc: switch to drm_*{get,put} helpersCihangir Akturk1-4/+4
drm_*_reference() and drm_*_unreference() functions are just compatibility alias for drm_*_get() and drm_*_put() and should not be used by new code. So convert all users of compatibility functions to use the new APIs. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501761585-11757-6-git-send-email-cakturk@gmail.com
2017-08-03drm/atmel-hlcdc : constify drm_plane_helper_funcs and drm_plane_funcs.Arvind Yadav1-2/+2
drm_plane_helper_funcs and drm_plane_funcsare not supposed to change at runtime. All functions working with drm_plane_helper_funcs and drm_plane_funcs work with const. So mark the non-const structs as const. File size before: text data bss dec hex filename 6072 596 0 6668 1a0c atmel_hlcdc_plane.o File size After adding 'const': text data bss dec hex filename 6218 436 0 6654 19fe atmel_hlcdc_plane.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/646415a3b2e62182f85254115e8491e5caf4b2c7.1499098826.git.arvind.yadav.cs@gmail.com
2017-08-03drm/fb: Fix pointer dereference before null check.David Lechner1-1/+1
fb_crtc is used before a null check, so move the use after the null check. This was just identified by inspection. I haven't actually observed a crash here, so it is possible that the null check could be unnecessary. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1501696813-8807-1-git-send-email-david@lechnology.com
2017-08-01drm: Create a format/modifier blobBen Widawsky2-0/+91
Updated blob layout (Rob, Daniel, Kristian, xerpi) v2: * Removed __packed, and alignment (.+) * Fix indent in drm_format_modifier fields (Liviu) * Remove duplicated modifier > 64 check (Liviu) * Change comment about modifier (Liviu) * Remove arguments to blob creation, use plane instead (Liviu) * Fix data types (Ben) * Make the blob part of uapi (Daniel) v3: Remove unused ret field. Change i, and j to unsigned int (Emil) v4: Use plane->modifier_count instead of recounting (Daniel) v5: Rename modifiers to modifiers_property (Ville) Use sizeof(__u32) instead to reflect UAPI nature (Ville) Make BUILD_BUG_ON for blob header size Cc: Rob Clark <robdclark@gmail.com> Cc: Kristian H. Kristensen <hoegsberg@gmail.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> (v2) Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v3) Signed-off-by: Daniel Stone <daniels@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170724034641.13369-2-ben@bwidawsk.net
2017-08-01drm: Plumb modifiers through plane initBen Widawsky42-49/+98
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Stone <daniels@collabora.com>
2017-08-01drm/msm: Convert to use new iterator macros, v2.Maarten Lankhorst2-11/+11
for_each_obj_in_state is about to be removed, so convert to the new iterator macros. Just like in omap, use crtc_state->active instead of crtc_state->enable when waiting for completion. Changes since v1: - Fix compilation. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Rob Herring <robh@kernel.org> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-6-maarten.lankhorst@linux.intel.com
2017-08-01drm/nouveau: Convert nouveau to use new iterator macros, v2.Maarten Lankhorst1-35/+37
Use the new atomic iterator macros, the old ones are about to be removed. With the new macros, it's more easy to get old and new state so get them from the macros instead of from obj->state. Changes since v1: - Don't mix up old and new state. (danvet) - Rebase on top of interruptible swap_state changes. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-7-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-08-01drm/omapdrm: Fix omap_atomic_wait_for_completionMaarten Lankhorst1-3/+3
Use the new iterator macro and look for crtc_state->active instead of enable, only crtc_state->active implies that vblanks will happen. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-5-maarten.lankhorst@linux.intel.com
2017-08-01drm/atomic: Use new iterator macros in drm_atomic_helper_wait_for_flip_done, again.Maarten Lankhorst1-1/+1
for_each_obj_in_state is about to be removed, so use the correct new iterator macro. I renamed the variable to 'unused', but forgot to convert drm_atomic_helper_wait_for_flip_done to the new iterator macro, so make it work this time. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-2-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-31gpu/host1x: Remove excess parameter in host1x_subdev_add docsSean Paul1-1/+0
Fixes the following warning when building docs: ../drivers/gpu/host1x/bus.c:50: warning: Excess function parameter 'driver' description in 'host1x_subdev_add' Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720174746.29100-4-seanpaul@chromium.org
2017-07-31drm: Fix warning when building docs for scdc_helperSean Paul1-13/+20
Fixes: ../drivers/gpu/drm/drm_scdc_helper.c:203: ERROR: Unexpected indentation. ../drivers/gpu/drm/drm_scdc_helper.c:204: WARNING: Block quote ends without a blank line; unexpected unindent. Changes in v2: - Property blockquote TMDS calculations so they look pretty (Daniel) - Remove duplicate documentation from the header file Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720200921.36897-1-seanpaul@chromium.org
2017-07-31drm/modes: Fix drm_mode_is_420_only() commentSean Paul1-1/+1
Fixes the following warnings when building docs: ../drivers/gpu/drm/drm_modes.c:1623: warning: No description found for parameter 'display' ../drivers/gpu/drm/drm_modes.c:1623: warning: Excess function parameter 'connector' description in 'drm_mode_is_420_only' Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720174746.29100-2-seanpaul@chromium.org
2017-07-31drm/rockchip: vop: rk3328: fix overlay abnormalMark yao3-0/+4
It's a hardware bug, all window's overlay channel reset value is same, hardware overlay would be die. so we must initial difference id for each overlay channel. The Channel register is supported on all vop will full design. Following is the details for this register VOP_WIN0_CTRL2 bit[7:4] win_rid_win0_cbr axi read id of win0 cbr channel bit[3:0] win_rid_win0_yrgb axi read id of win0 yrgb channel Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1501049980-6239-1-git-send-email-mark.yao@rock-chips.com
2017-07-31drm/rockchip: vop: add a series of vop supportMark yao3-224/+908
Vop Full framework now has following vops: IP version chipname 3.1 rk3288 3.2 rk3368 3.4 rk3366 3.5 rk3399 big 3.6 rk3399 lit 3.7 rk3228 3.8 rk3328 The above IP version is from H/W define, some of vop support get the IP version from VERSION_INFO register, some are not. hardcode the IP version for each vop to identify them. major version: used for IP structure, Vop full framework is 3, vop little framework is 2. minor version: on same structure, newer design vop will bigger then old one. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1501049971-6131-1-git-send-email-mark.yao@rock-chips.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.