aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-11-30drm/bridge: tc358767: do no fail on hi-res displaysAndrey Gusakov1-5/+9
Do not fail data rates higher than 2.7 and more than 2 lanes. Try to fall back to 2.7Gbps and 2 lanes. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: Fix lvds-encoder since the panel_bridge rework.Eric Anholt1-7/+41
The panel_bridge bridge attaches to the panel's OF node, not the lvds-encoder's node. Put in a little no-op bridge of our own so that our consumers can still find a bridge where they expect. This also fixes an unintended unregistration and leak of the panel-bridge on module remove. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri dge.") Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net
2017-11-30drm/bridge: synopsys/dw-hdmi: Enable cec clockPierre-Hugues Husson1-0/+25
Support the "cec" optional clock. The documentation already mentions "cec" optional clock and it is used by several boards, but currently the driver doesn't enable it, thus preventing cec from working on those boards. And even worse: a /dev/cecX device will appear for those boards, but it won't be functioning without configuring this clock. Changes: v4: - Change commit message to stress the importance of this patch v3: - Drop useless braces v2: - Separate ENOENT errors from others - Propagate other errors (especially -EPROBE_DEFER) Signed-off-by: Pierre-Hugues Husson <phh@phh.me> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171125201844.11353-1-phh@phh.me
2017-11-30drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handlingHans Verkuil3-25/+37
If the device tree for a board did not specify a cec clock, then adv7511_cec_init would return an error, which would cause adv7511_probe() to fail and thus there is no HDMI output. There is no need to have adv7511_probe() fail if the CEC initialization fails, so just change adv7511_cec_init() to a void function. In addition, adv7511_cec_init() should just return silently if the cec clock isn't found and show a message for any other errors. An otherwise correct cleanup patch from Dan Carpenter turned this broken failure handling into a kernel Oops, so bisection points to commit 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") rather than 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support"). Based on earlier patches from Arnd and John. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Link: https://bugs.linaro.org/show_bug.cgi?id=3345 Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551 Fixes: 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/9097b2a4-b6b9-5fca-e039-0a17694b1143@xs4all.nl
2017-11-29drm/radeon: remove init of CIK VMIDs 8-16 for amdkfdOded Gabbay1-24/+0
VMIDs 8-16 in Kaveri were reserved for use by the amdkfd driver. Because we removed amdkfd support from radeon, those VMIDs are now used by radeon and are initialized by radeon. This patch removes the function that initialized those VMIDs for amdkfd use. This initialization overridden the radeon initialization and caused GPU faults and GUI crashed. Fixes: f4fa88ab28ab ("drm/radeon: deprecate and remove KFD interface") Rported-by: Michel Dänzer <michel.daenzer@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-29drm/ttm: fix populate_and_map() functions once moreChristian König1-2/+0
This reverts "drm/ttm: Fix configuration error around populate_and_map() functions". This fix has gone into the wrong direction. Those helpers should be available even when neither CONFIG_INTEL_IOMMU nor CONFIG_SWIOTLB are set. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-29drm/fb_helper: Disable all crtc's when initial setup fails.Maarten Lankhorst1-0/+4
Some drivers like i915 start with crtc's enabled, but with deferred fbcon setup they were no longer disabled as part of fbdev setup. Headless units could no longer enter pc3 state because the crtc was still enabled. Fix this by calling restore_fbdev_mode when we would have called it otherwise once during initial fbdev setup. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: ca91a2758fce ("drm/fb-helper: Support deferred setup") Cc: <stable@vger.kernel.org> # v4.14+ Reported-by: Thomas Voegtle <tv@lio96.de> Tested-by: Thomas Voegtle <tv@lio96.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171128111603.62757-1-maarten.lankhorst@linux.intel.com
2017-11-29drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressiveLucas Stach1-1/+1
drm_atomic_helper_setup_commit expects that flipping of previous commits has happened when it is called to set up a new commit. This can be violated by commits where userspace doesn't get a flip completion event to synchronize against i.e. legacy modesets and property changes. The expectation is that those are done by blocking commits, which wait for completion. Most drivers call drm_atomic_helper_wait_for_vblanks in the commit_tail to ensure completion, but the wait for next vblank might not actually happen if the commit didn't change any planes. Make the wait more agressive by also waiting if no planes changed. This is the minimal regression fix for the 4.15 kernel series. Long term drivers should switch away from drm_atomic_helper_wait_for_vblanks and use drm_atomic_helper_wait_for_flip_done instead. Fixes: de39bec1a0c4 ("drm/atomic: Remove waits in drm_atomic_helper_commit_cleanup_done, v2.") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171129110431.6300-1-l.stach@pengutronix.de
2017-11-28drm/amd/display: USB-C / thunderbolt dock specific workaroundHersen Wu1-45/+40
reading dpcd 0x600 cause link loss for a particular USB-C dock with thurderbolt. workaround by avoiding dcpd 0x600 read unless it's necessary. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_doneAndrey Grodzovsky1-1/+1
This new helper function is advised to be used for drviers that use the nonblocking commit tracking support instead of drm_atomic_helper_wait_for_vblanks. Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix gamma settingRoman Li1-1/+2
Adding gamma changed check as condition for affected plane. We ignored adding plane as affected if modeset was not required. But for color management change we still need it. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Do not put drm_atomic_state on resumeLeo (Sunpeng) Li1-1/+0
drm_atomic_helper_resume now puts it for us. See relevant patch here: https://lists.freedesktop.org/archives/dri-devel/2017-October/154268.html Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix couple more inconsistent NULL checks in dc_resourceHarry Wentland1-2/+7
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1001 acquire_free_pipe_for_stream() error: we previously assumed 'head_pipe' could be null (see line 998) drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1808 dc_validate_global_state() error: we previously assumed 'new_ctx' could be null (see line 1778) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix potential NULL and mem leak in create_linksHarry Wentland1-4/+10
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:148 create_links() error: potential null dereference 'link->link_enc'. (kzalloc returns null) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix hubp check in set_cursor_positionHarry Wentland2-12/+4
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:298 dc_stream_set_cursor_position() error: we previously assumed 'hubp' could be null (see line 294) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix use before NULL check in validate_timingHarry Wentland1-4/+4
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1124 dce110_timing_generator_validate_timing() warn: variable dereferenced before check 'timing' (see line 1116) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Bunch of smatch error and warning fixes in DCHarry Wentland4-9/+16
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/log_helpers.c:79 dc_conn_log() error: buffer overflow 'signal_type_info_tbl' 10 <= 10 drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:266 bios_parser_get_dst_obj() error: uninitialized symbol 'id'. drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_audio.c:357 dce_aud_az_enable() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_resource.c:958 dcn10_acquire_idle_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 952) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix amdgpu_dm bugs found by smatchHarry Wentland1-6/+10
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:2760 create_eml_sink() warn: variable dereferenced before check 'aconnector->base.edid_blob_ptr' (see line 2758) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:4270 amdgpu_dm_atomic_commit_tail() warn: variable dereferenced before check 'dm_new_crtc_state->stream' (see line 4266) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:4417 dm_restore_drm_connector_state() warn: variable dereferenced before check 'disconnected_acrtc' (see line 4415) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: try to find matching audio inst for enc inst firstCharlene Liu2-5/+8
[Description] in eDP+ HDMI/DP clone or extended configuration, audio inst changed from inst 1 to inst0. No failure related this though, just playback device endpoint inst changed. Also remove one addition register read. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix seq issue: turn on clock before programming afmt.Charlene Liu2-12/+15
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix memory leaks on error exit returnColin Ian King1-5/+7
Currently in the case where some of the allocations fail for dce110_tgv, dce110_xfmv, dce110_miv or dce110_oppv then the exit return path ends up leaking allocated objects. Fix this by kfree'ing them before returning. Also re-work the comparison of the null pointers to use the !ptr idiom. Detected by CoverityScan, CID#1460246, 1460325, 1460324, 1460392 ("Resource Leak") Fixes: c4562236b3bc ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: check plane state before validating fbcShirish S1-0/+4
While validation fbc, array_mode of the pipe is accessed without checking plane_state exists for it. Causing to null pointer dereferencing followed by reboot when a crtc associated with external display(not connected) is page flipped. This patch adds a check for plane_state before using it to validate fbc. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Do DC mode-change check when adding CRTCsLeo (Sunpeng) Li1-1/+1
Within atomic check, dm_update_crtcs_state is called twice. First to remove from the dc_state, and subsequently to add to it. In both calls, a secondary mode-change check is done using dc-level states. We shouldn't be doing this while removing, since a new dc_stream_state has not been created to do the necessary comparison. Because of this, the mode_changed flag within the DRM state can be mistakenly set to false. Doing so only when adding prevents this. We are also guaranteed that a call to add will come after remove, or else the atomic check fails (and a commit will not happen). Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Revert noisy assert messagesJordan Lazare1-4/+0
This partially reverts commit 4fb48bb66211 ("dc: fix split viewport rounding error"). Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix split viewport rounding errorDmytro Laktyushkin2-6/+8
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Check aux channel before MST resumeJerry (Fangzhi) Zuo1-1/+2
It is to fix: MST display failed to resume from S3 At the beginning of resume from S3, need to check if mgr->aux is NULL. Fake MST encoder doesn't have real aux channel. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix split recout offsetDmytro Laktyushkin1-2/+2
Previous recout calculation fix changed recout size rounding and affected the offset when it should not have Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Don't reject 3D timingsAndrew Jiang1-3/+0
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Handle as MST first and then DP dongle if sink support bothHersen Wu1-16/+16
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix split recout calculationDmytro Laktyushkin1-5/+3
Recout split rounding code was wrong Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix S3 topology changeRoman Li1-0/+4
Clean fake sink flag on resume if real sink connected. Fixing S3 topology change problem like this: 1) x desktop with 1 or > displays 2) unplug display 3) suspend 4) replug same display 5) resume without this change replugged display doesn't light up Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Add timing validation against dongle capEric Yang4-3/+91
For DP active dongles, the dpcd dongle caps are read but not used to validate mode timing. This addresses this. In particular, this change fixes light up on the HDMI 4k TV connected through DP active dongle. Since the 4k TV defaults to YCbCr420, which the dongle don't support. This change does not address MST cases, a more generalized approach must be taken for that. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Should disable when new stream is nullLeo (Sunpeng) Li1-2/+4
core_link_disable_stream should be called when the new stream is null (i.e. want to disable). Modify the if condition to reflect that. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Add null check for 24BPP (xfm and dpp)Bhawanpreet Lakha1-6/+12
Fixes Nullptr error when trying 24BPP Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amdgpu: drop experimental flag for ravenAlex Deucher1-1/+1
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amdgpu: don't try to move pinned BOsChristian König1-0/+4
Never try to move pinned BOs during CS. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amdgpu: Use unsigned ring indices in amdgpu_queue_mgr_mapMichel Dänzer2-4/+4
This matches the corresponding UAPI fields. Treating the ring index as signed could result in accessing random unrelated memory if the MSB was set. Fixes: effd924d2f3b ("drm/amdgpu: untie user ring ids from kernel ring ids v6") Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amdgpu: Set adev->vcn.irq.num_types for VCNMichel Dänzer1-1/+1
We were setting adev->uvd.irq.num_types instead. Fixes: 9b257116e784 ("drm/amdgpu: add vcn enc irq support") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-11-28Revert "drm/amdgpu: fix rmmod KCQ disable failed error"Alex Deucher3-3/+5
This reverts commit 446947b44fb8cabc0213ff4efd706931e36b1963. this patch is incorrrect, amdgpu_ucode_bo_fini always called after gfx_hw_fini. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amdgpu: used cached gca values for cik_read_registerAlex Deucher1-16/+95
Using the cached values has less latency for bare metal and prevents reading back bogus values if the engine is powergated. This was implemented for VI and SI, but somehow CIK got missed. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amdgpu/gfx7: cache raster_config valuesAlex Deucher1-0/+16
We did this for gfx6 and 8, but somehow missed gfx7. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amdgpu: move UVD/VCE and VCN structure out from unionLeo Liu1-12/+8
With the enablement of VCN Dec and Enc from user space, User space queries kernel for the IP information, if HW has UVD/VCE, the info comes from these IP blocks, but this could end up mis-interpret for VCN when they are in the union, the other way same when HW with VCN block. Signed-off-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Fixes: 95d0906f8506 ("drm/amdgpu: add initial vcn support and decode tests") Cc: stable@vger.kernel.org Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
2017-11-28Merge tag 'drm-for-v4.15-part2-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds12-23/+64
Pull drm fixes from Dave Airlie: - TTM regression fix for some virt gpus (bochs vga) - a few i915 stable fixes - one vc4 fix - one uapi fix * tag 'drm-for-v4.15-part2-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ttm: don't attempt to use hugepages if dma32 requested (v2) drm/vblank: Pass crtc_id to page_flip_ioctl. drm/i915: Fix init_clock_gating for resume drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM drm/i915: Clear breadcrumb node when cancelling signaling drm/i915/gvt: ensure -ve return value is handled correctly drm/i915: Re-register PMIC bus access notifier on runtime resume drm/i915: Fix false-positive assert_rpm_wakelock_held in i915_pmic_bus_access_notifier v2 drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks drm/vc4: Account for interrupts in flight
2017-11-28drm/i915/gvt: Correct ADDR_4K/2M/1G_MASK definitionXiong Zhang1-3/+3
For ADDR_4K_MASK, bit[45..12] should be 1, all other bits should be 0. The current definition wrongly set bit[46] as 1 also. This path fixes this. v2: Add commit message, fixes and cc stable.(Zhenyu) Fixes: 2707e4446688("drm/i915/gvt: vGPU graphics memory virtualization") Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-11-28drm/i915/gvt: enabled pipe A default on creating vgpuXiaolin Zhang1-0/+2
when i915 driver unloading, it will shutdown all CRTCs and it will introudce kernel panic when conducting igt drv_module_reload test case under guest environment (bug reported by XENGT-468) as below: BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: intel_edp_backlight_off+0xe/0x7c [i915] RIP: 0010:intel_edp_backlight_off+0xe/0x7c [i915] Call Trace: intel_disable_ddi+0xb3/0xbc [i915] intel_modeset_setup_hw_state+0x654/0xb4c [i915] intel_modeset_init+0x9f1/0xe69 [i915] ? intel_i2c_reset+0x3d/0x40 [i915] ? intel_setup_gmbus+0xba/0x249 [i915] i915_driver_load+0xae5/0xcc0 [i915] i915_pci_probe+0x3a/0x3c [i915] local_pci_probe+0x38/0x7b pci_device_probe+0xec/0x12b driver_probe_device+0x134/0x294 __driver_attach+0x6a/0x8c ? driver_probe_device+0x294/0x294 bus_for_each_dev+0x68/0x80 driver_attach+0x19/0x1b bus_add_driver+0xea/0x1d3 ? 0xffffffffa03cd000 driver_register+0x85/0xc1 ? 0xffffffffa03cd000 __pci_register_driver+0x55/0x57 i915_init+0x57/0x5a [i915] do_one_initcall+0x8a/0x12e ? __vunmap+0x8d/0x93 ? kmem_cache_alloc_trace+0x96/0x11c do_init_module+0x5a/0x1e1 in this case, active connector detected but no active pipe available, so it will hang to disable connector. to fix, on vgpu creating, to report active pipe available for guest. Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-11-28drm/i915/gvt: Move request alloc to dispatch_workload path onlyfred gao3-4/+29
Previously the performance is improved through the workload auditing and shadowing ahead of vGPU scheduling, however, there is the case that more requests are allocated in submit_context before the previous request is added, the timeline will hold its seqno which is later. This patch is to move the request alloc to dispatch_workload function, where is the same place as request is added. It will fix the issue of kernel BUG for (timeline->seqno != request->fence.seqno) check when add_request. Fixes: 89ea20b930cb ("drm/i915/gvt: Factor out scan and shadow from workload dispatch") Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: fred gao <fred.gao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit f2880e04f3a5419366926182fc97a3c2e4fd8f2a)
2017-11-28drm/i915/gvt: remove skl_misc_ctl_write handlerWeinan Li1-40/+5
With different settings of compressed data hash mode between VMs and host may cause gpu issues. Commit: 1999f108c ("drm/i915/gvt: Disable compression workaround for Gen9") disable compression workaround of guest in gvt host to align with host. Commit: 93564044f ("drm/i915: Switch over to the LLC/eLLC hotspot avoidance hash mode for CCS") add compression workaround, then we can remove the skl_misc_ctl_write hanlder. Better solution should be always keeping same settings as host, and bypass the write request from VMs, but it need to fetch data from host's "Context". Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-11-28drm/i915/gvt: Fix unsafe locking caused by spin_unlock_bhChangbin Du1-4/+5
The caller of shadow_context_status_change may disable irqs. So it is not safe to use spin_unlock_bh in such context. Let's switch to irqsave version for safety. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4504 at kernel/softirq.c:161 __local_bh_enable_ip+0x46/0x60 [ 168.797710] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 168.797712] task: ffff8c693d22db80 task.stack: ffffb51b482bc000 [ 168.797718] RIP: 0010:__local_bh_enable_ip+0x46/0x60 [ 168.797721] RSP: 0018:ffffb51b482bfa10 EFLAGS: 00010046 [ 168.797724] RAX: 0000000000000046 RBX: ffff8c6900278000 RCX: 00000000ffffffff [ 168.797726] RDX: 0000000000000001 RSI: 0000000000000200 RDI: ffffffffc06a0330 [ 168.797728] RBP: ffffb51b482bfa10 R08: 0000000000000000 R09: ffff8c690027cb90 [ 168.797730] R10: ffffb51b482bfa40 R11: 00000004072f0001 R12: 0000000000000000 [ 168.797732] R13: 0000000000000000 R14: ffff8c690027ca9c R15: 0000000000000000 [ 168.797735] FS: 00007ff187c56700(0000) GS:ffff8c6959d00000(0000) knlGS:0000000000000000 [ 168.797738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.797740] CR2: 0000562bc0c3991f CR3: 0000000430614006 CR4: 00000000003606e0 [ 168.797742] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.797744] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.797745] Call Trace: [ 168.797755] _raw_spin_unlock_bh+0x1e/0x20 [ 168.797826] shadow_context_status_change+0x120/0x1e0 [i915] [ 168.797831] notifier_call_chain+0x4a/0x70 [ 168.797834] atomic_notifier_call_chain+0x1a/0x20 [ 168.797896] execlists_cancel_port_requests+0x4f/0x80 [i915] [ 168.797956] reset_common_ring+0x30/0x100 [i915] [ 168.798007] i915_gem_reset_engine+0x114/0x330 [i915] [ 168.798060] ? i915_gem_retire_requests+0x75/0x180 [i915] [ 168.798111] i915_gem_reset+0x3e/0xb0 [i915] [ 168.798149] i915_reset+0x10b/0x1c0 [i915] [ 168.798187] i915_reset_device+0x209/0x220 [i915] [ 168.798225] ? gen8_gt_irq_ack+0x170/0x170 [i915] [ 168.798229] ? __queue_work+0x430/0x430 [ 168.798270] i915_handle_error+0x285/0x420 [i915] [ 168.798275] ? mntput+0x24/0x40 [ 168.798281] ? terminate_walk+0x8e/0xf0 [ 168.798328] i915_wedged_set+0x84/0xc0 [i915] [ 168.798333] simple_attr_write+0xab/0xc0 [ 168.798337] full_proxy_write+0x54/0x90 [ 168.798343] __vfs_write+0x37/0x170 [ 168.798349] ? common_file_perm+0x4c/0x100 [ 168.798355] ? apparmor_file_permission+0x1a/0x20 [ 168.798361] ? security_file_permission+0x3b/0xc0 [ 168.798365] vfs_write+0xb8/0x1b0 [ 168.798370] SyS_write+0x55/0xc0 [ 168.798376] entry_SYSCALL_64_fastpath+0x1e/0xa9 Fixes: 0e86cc9 ("drm/i915/gvt: implement per-vm mmio switching optimization") Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-11-28drm/i915: fix intel_backlight_device_register declarationArnd Bergmann1-1/+1
The alternative intel_backlight_device_register() definition apparently never got used, but I have now run into a case of i915 being compiled without CONFIG_BACKLIGHT_CLASS_DEVICE, resulting in a number of identical warnings: drivers/gpu/drm/i915/intel_drv.h:1739:12: error: 'intel_backlight_device_register' defined but not used [-Werror=unused-function] This marks the function as 'inline', which was surely the original intention here. Fixes: 1ebaa0b9c2d4 ("drm/i915: Move backlight registration to connector registration") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171127151239.1813673-1-arnd@arndb.de (cherry picked from commit 2de2d0b063b08becb2c67a2c338c44e37bdcffee) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-11-28drm/i915/fbdev: Serialise early hotplug events with async fbdev configChris Wilson1-4/+6
As both the hotplug event and fbdev configuration run asynchronously, it is possible for them to run concurrently. If configuration fails, we were freeing the fbdev causing a use-after-free in the hotplug event. <7>[ 3069.935211] [drm:intel_fb_initial_config [i915]] Not using firmware configuration <7>[ 3069.935225] [drm:drm_setup_crtcs] looking for cmdline mode on connector 77 <7>[ 3069.935229] [drm:drm_setup_crtcs] looking for preferred mode on connector 77 0 <7>[ 3069.935233] [drm:drm_setup_crtcs] found mode 3200x1800 <7>[ 3069.935236] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config <7>[ 3069.935253] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 43 (0,0) <7>[ 3069.935323] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <4>[ 3069.967737] general protection fault: 0000 [#1] PREEMPT SMP <0>[ 3069.977453] --------------------------------- <4>[ 3069.977457] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mei_me mii prime_numbers mei i2c_hid pinctrl_geminilake pinctrl_intel [last unloaded: i915] <4>[ 3069.977492] CPU: 1 PID: 15414 Comm: kworker/1:0 Tainted: G U 4.14.0-CI-CI_DRM_3388+ #1 <4>[ 3069.977497] Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 3069.977508] Workqueue: events output_poll_execute <4>[ 3069.977512] task: ffff880177734e40 task.stack: ffffc90001fe4000 <4>[ 3069.977519] RIP: 0010:__lock_acquire+0x109/0x1b60 <4>[ 3069.977523] RSP: 0018:ffffc90001fe7bb0 EFLAGS: 00010002 <4>[ 3069.977526] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000282 RCX: 0000000000000000 <4>[ 3069.977530] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880170d4efd0 <4>[ 3069.977534] RBP: ffffc90001fe7c70 R08: 0000000000000001 R09: 0000000000000000 <4>[ 3069.977538] R10: 0000000000000000 R11: ffffffff81899609 R12: ffff880170d4efd0 <4>[ 3069.977542] R13: ffff880177734e40 R14: 0000000000000001 R15: 0000000000000000 <4>[ 3069.977547] FS: 0000000000000000(0000) GS:ffff88017fc80000(0000) knlGS:0000000000000000 <4>[ 3069.977551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 3069.977555] CR2: 00007f7e8b7bcf04 CR3: 0000000003e0f000 CR4: 00000000003406e0 <4>[ 3069.977559] Call Trace: <4>[ 3069.977565] ? mark_held_locks+0x64/0x90 <4>[ 3069.977571] ? _raw_spin_unlock_irq+0x24/0x50 <4>[ 3069.977575] ? _raw_spin_unlock_irq+0x24/0x50 <4>[ 3069.977579] ? trace_hardirqs_on_caller+0xde/0x1c0 <4>[ 3069.977583] ? _raw_spin_unlock_irq+0x2f/0x50 <4>[ 3069.977588] ? finish_task_switch+0xa5/0x210 <4>[ 3069.977592] ? lock_acquire+0xaf/0x200 <4>[ 3069.977596] lock_acquire+0xaf/0x200 <4>[ 3069.977600] ? __mutex_lock+0x5e9/0x9b0 <4>[ 3069.977604] _raw_spin_lock+0x2a/0x40 <4>[ 3069.977608] ? __mutex_lock+0x5e9/0x9b0 <4>[ 3069.977612] __mutex_lock+0x5e9/0x9b0 <4>[ 3069.977616] ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0 <4>[ 3069.977621] ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0 <4>[ 3069.977625] drm_fb_helper_hotplug_event.part.19+0x16/0xa0 <4>[ 3069.977630] output_poll_execute+0x8d/0x180 <4>[ 3069.977635] process_one_work+0x22e/0x660 <4>[ 3069.977640] worker_thread+0x48/0x3a0 <4>[ 3069.977644] ? _raw_spin_unlock_irqrestore+0x4c/0x60 <4>[ 3069.977649] kthread+0x102/0x140 <4>[ 3069.977653] ? process_one_work+0x660/0x660 <4>[ 3069.977657] ? kthread_create_on_node+0x40/0x40 <4>[ 3069.977662] ret_from_fork+0x27/0x40 <4>[ 3069.977666] Code: 8d 62 f8 c3 49 81 3c 24 e0 fa 3c 82 41 be 00 00 00 00 45 0f 45 f0 83 fe 01 77 86 89 f0 49 8b 44 c4 08 48 85 c0 0f 84 76 ff ff ff <f0> ff 80 38 01 00 00 8b 1d 62 f9 e8 01 45 8b 85 b8 08 00 00 85 <1>[ 3069.977707] RIP: __lock_acquire+0x109/0x1b60 RSP: ffffc90001fe7bb0 <4>[ 3069.977712] ---[ end trace 4ad012eb3af62df7 ]--- In order to keep the dev_priv->ifbdev alive after failure, we have to avoid the free and leave it empty until we unload the module (which is less than ideal, but a necessary evil for simplicity). Then we can use intel_fbdev_sync() to serialise the hotplug event with the configuration. The serialisation between the two was removed in commit 934458c2c95d ("Revert "drm/i915: Fix races on fbdev""), but the use after free is much older, commit 366e39b4d2c5 ("drm/i915: Tear down fbdev if initialization fails") Fixes: 366e39b4d2c5 ("drm/i915: Tear down fbdev if initialization fails") Fixes: 934458c2c95d ("Revert "drm/i915: Fix races on fbdev"") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lukas Wunner <lukas@wunner.de> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/20171125194155.355-1-chris@chris-wilson.co.uk (cherry picked from commit ad88d7fc6c032ddfb32b8d496a070ab71de3a64f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.