| Age | Commit message (Collapse) | Author | Files | Lines |
|
I doubt anyone has used the display error state since CS flips
went the way of the dodo. Just nuke it.
It might be semi interesting to have something like this for
FIFO underruns and the like, but as it stands this wouldn't
provide a sufficient amount of information. So would need
an extensive rewrite anyway.
The lockless power well handling is also racy, so this could
just be contributing noise to test results if we end up
accessing something with the relevant power well already
disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505191140.14215-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
amd-drm-fixes-5.13-2021-05-05:
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506033929.3875-1-alexander.deucher@amd.com
|
|
Two patches, one to fix a null pointer dereference in msm, and one to
fix an unused warning for in fbdev when PROCFS is disabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 06 May 2021 22:26:35 AEST
# gpg: using ? key E3EF0D6F671851C5
# gpg: Can't check signature: unknown pubkey algorithm
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506122723.oqadel7oacazywij@gilmour
|
|
drm/i915 GVT fixes for v5.13-rc1:
- Fix a possible division by zero in vgpu display rate calculation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87wnsk16sa.fsf@intel.com
|
|
Initialize audio_comp when audio starts and wait for audio_comp at
dp_display_disable(). This will take care of both dongle unplugged
and display off (suspend) cases.
Changes in v2:
-- add dp_display_signal_audio_start()
Changes in v3:
-- restore dp_display_handle_plugged_change() at dp_hpd_unplug_handle().
Changes in v4:
-- none
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Fixes: c703d5789590 ("drm/msm/dp: trigger unplug event in msm_dp_display_disable")
Link: https://lore.kernel.org/r/1619048258-8717-3-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Link status is different from display connected status in the case
of something like an Apple dongle where the type-c plug can be
connected, and therefore the link is connected, but no sink is
connected until an HDMI cable is plugged into the dongle.
The sink_count of DPCD of dongle will increase to 1 once an HDMI
cable is plugged into the dongle so that display connected status
will become true. This checking also apply at pm_resume.
Changes in v4:
-- none
Fixes: 94e58e2d06e3 ("drm/msm/dp: reset dp controller only at boot up and pm_resume")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Link: https://lore.kernel.org/r/1619048258-8717-2-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The implementation of two workarounds are missing causing failures
in CI with pre-production HW.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505213801.80772-1-jose.souza@intel.com
|
|
In commit 5c209d8056b9 ("drm/gma500: psb_spank() doesn't need it's
own file"), accel_2d.c was deleted and psb_spank() was moved into
psb_drv.c. Fix the comment here.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506112851.20315-1-wanjiabing@vivo.com
|
|
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Note that this fixes an inconsistency: We've set the cap everywhere,
but only nv50+ supports modifiers. Hence cc stable, but not further
back then the patch from Paul.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-6-daniel.vetter@ffwll.ch
|
|
Setting the cap without the modifier list is very confusing to
userspace. Fix that by listing the ones we support explicitly.
Stable backport so that userspace can rely on this working in a
reasonable way, i.e. that the cap set implies IN_FORMATS is available.
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-5-daniel.vetter@ffwll.ch
|
|
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
v2: Rebase.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Kalyan Thota <kalyant@codeaurora.org>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Eric Anholt <eric@anholt.net>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-4-daniel.vetter@ffwll.ch
|
|
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-3-daniel.vetter@ffwll.ch
|
|
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-7-daniel.vetter@ffwll.ch
|
|
Even when all we support is linear, make that explicit. Otherwise the
uapi is rather confusing.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-2-daniel.vetter@ffwll.ch
|
|
The builtin size check isn't really the right thing for AMD
modifiers due to a couple of reasons:
1) In the format structs we don't do set any of the tilesize / blocks
etc. to avoid having format arrays per modifier/GPU
2) The pitch on the main plane is pixel_pitch * bytes_per_pixel even
for tiled ...
3) The pitch for the DCC planes is really the pixel pitch of the main
surface that would be covered by it ...
Note that we only handle GFX9+ case but we do this after converting
the implicit modifier to an explicit modifier, so on GFX9+ all
framebuffers should be checked here.
There is a TODO about DCC alignment, but it isn't worse than before
and I'd need to dig a bunch into the specifics. Getting this out in
a reasonable timeframe to make sure it gets the appropriate testing
seemed more important.
Finally as I've found that debugging addfb2 failures is a pita I was
generous adding explicit error messages to every failure case.
Fixes: f258907fdd83 ("drm/amdgpu: Verify bo size can fit framebuffer size on init.")
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise tiling modes that require the values form this field
(In particular _*_X) would be corrupted upon video decode.
Copied from the VCN v2 code.
Fixes: 99541f392b4d ("drm/amdgpu: add mc resume DPG mode for VCN3.0")
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here for both komeda and
malidp.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-1-daniel.vetter@ffwll.ch
|
|
Replace the open coded drm_mode_is_420_only() with the real thing.
No functional changes.
Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504102742.7005-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Replace the hand rolled PLL lock bit waits with intel_de_wait_for_*().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430153444.29270-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Replace the hand rolled rmw sequences with intel_de_rmw().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430153444.29270-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Replace the hand rolled rmw sequences with intel_de_rmw().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430153444.29270-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Replace the hand rolled rmw sequences with intel_de_rmw().
Jani pointed out that intel_de_rmw() skips the write if the
value does not change. That should be totally fine here, but
let's at least acknowledge the change in behaviour in case I'm
somehow wrong...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430153444.29270-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Extract a few of the switch statements into helper functions to
reduce the pollution in the cdclk programming functions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430153444.29270-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We lost the i915_reg_rw tracepoint for a lot of display registers
when we switched from the heavyweight normal register accessors to
the lightweight _fw() variants. See eg. commit dd584fc0711a
("drm/i915: Use I915_READ_FW for plane updates").
Put the tracepoints back so that the register traces might
actually be useful. Hopefully these should be close to free
when the tracepoint is not enabled and thus not slow down
our vblank critical sections significantly.
v2: Copy paste the same-cacheline-hang warning from
intel_uncore.h (Anshuman)
Cc: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-2-ville.syrjala@linux.intel.com
|
|
Hoist the intel_de.h include from intel_display_types.h one
level up. I need this in order to untangle the include order
so that I can add tracepoints into intel_de.h.
This little cocci script did most of the work for me:
@find@
@@
(
intel_de_read(...)
|
intel_de_read_fw(...)
|
intel_de_write(...)
|
intel_de_write_fw(...)
)
@has_include@
@@
(
#include "intel_de.h"
|
#include "display/intel_de.h"
)
@depends on find && !has_include@
@@
+ #include "intel_de.h"
#include "intel_display_types.h"
@depends on find && !has_include@
@@
+ #include "display/intel_de.h"
#include "display/intel_display_types.h"
Cc: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
|
|
LONTIUM_LT8912B uses "drm_display_mode_to_videomode" from
DRM framework that needs VIDEOMODE_HELPERS to be enabled.
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Reported-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504220207.4004511-1-adrien.grassein@gmail.com
|
|
Make sure that the XYUV8888 format is handled correctly when it's used
with a MC_CCS modifier framebuffer. Besides this format not working, the
driver will also return an incorrect error value when trying to use it,
indicating that the second color plane in the framebuffer is set
unexpectedly.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210501002853.4132009-1-imre.deak@intel.com
|
|
We use some of the lower bits of the retire function pointer for
potential flags, which is quite thorny, since the caller needs to
remember to give the function the correct alignment with
__i915_active_call, otherwise we might incorrectly unpack the pointer
and jump to some garbage address later. Instead of all this let's just
pass the flags along as a separate parameter.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
References: ca419f407b43 ("drm/i915: Fix crash in auto_retire")
References: d8e44e4dd221 ("drm/i915/overlay: Fix active retire callback alignment")
References: fd5f262db118 ("drm/i915/selftests: Fix active retire callback alignment")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504164136.96456-1-matthew.auld@intel.com
|
|
Tracking devices, process info and fence info using
/proc/pid/fdinfo
Signed-off-by: David M Nieto <David.Nieto@amd.com>
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426062701.39732-2-Roy.Sun@amd.com
|
|
Update the timestamp of scheduled fence on HW
completion of the previous fences
This allow more accurate tracking of the fence
execution in HW
v2 (chk): drop the flag check and improve the comment
Signed-off-by: David M Nieto <david.nieto@amd.com>
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426062701.39732-1-Roy.Sun@amd.com
|
|
Static analysis reports this problem
amdgpu_pm.c:478:16: warning: The right operand of '<' is a garbage value
for (i = 0; i < data.nums; i++) {
^ ~~~~~~~~~
In some cases data is not set. Initialize to 0 and flag not setting
data as an error with the existing check.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Avoid leaving a hanging pre-allocated clock_info if last mode is
invalid, and avoid heap corruption if no valid modes are found.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537
Fixes: 6991b8f2a319 ("drm/radeon/kms: fix segfault in pm rework")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
An out of bounds write happens when setting the default power state.
KASAN sees this as:
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
==================================================================
BUG: KASAN: slab-out-of-bounds in
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157
CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50
Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008
Call Trace:
dump_stack+0xa5/0xe6
print_address_description.constprop.0+0x18/0x239
kasan_report+0x170/0x1a8
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
radeon_atombios_get_power_modes+0x144/0x1888 [radeon]
radeon_pm_init+0x1019/0x1904 [radeon]
rs690_init+0x76e/0x84a [radeon]
radeon_device_init+0x1c1a/0x21e5 [radeon]
radeon_driver_load_kms+0xf5/0x30b [radeon]
drm_dev_register+0x255/0x4a0 [drm]
radeon_pci_probe+0x246/0x2f6 [radeon]
pci_device_probe+0x1aa/0x294
really_probe+0x30e/0x850
driver_probe_device+0xe6/0x135
device_driver_attach+0xc1/0xf8
__driver_attach+0x13f/0x146
bus_for_each_dev+0xfa/0x146
bus_add_driver+0x2b3/0x447
driver_register+0x242/0x2c1
do_one_initcall+0x149/0x2fd
do_init_module+0x1ae/0x573
load_module+0x4dee/0x5cca
__do_sys_finit_module+0xf1/0x140
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Without KASAN, this will manifest later when the kernel attempts to
allocate memory that was stomped, since it collides with the inline slab
freelist pointer:
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2
Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008
RIP: 0010:kfree+0x115/0x230
Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7
RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246
RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d
RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80
RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000
R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100
FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0
Call Trace:
__free_fdtable+0x16/0x1f
put_files_struct+0x81/0x9b
do_exit+0x433/0x94d
do_group_exit+0xa6/0xa6
__x64_sys_exit_group+0xf/0xf
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe80ef64bea
Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0.
RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea
RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0
R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0
Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ...
Use a valid power_state index when initializing the "flags" and "misc"
and "misc2" fields.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537
Reported-by: Erhard F. <erhard_f@mailbox.org>
Fixes: a48b9b4edb8b ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)")
Fixes: 79daedc94281 ("drm/radeon/kms: minor pm cleanups")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Our driver supports overlay planes, and as expected, some userspace
compositor takes advantage of these features. If the userspace is not
enabling the cursor, they can use multiple planes as they please.
Nevertheless, we start to have constraints when userspace tries to
enable hardware cursor with various planes. Basically, we cannot draw
the cursor at the same size and position on two separated pipes since it
uses extra bandwidth and DML only run with one cursor.
For those reasons, when we enable hardware cursor and multiple planes,
our driver should accept variations like the ones described below:
+-------------+ +--------------+
| +---------+ | | |
| |Primary | | | Primary |
| | | | | Overlay |
| +---------+ | | |
|Overlay | | |
+-------------+ +--------------+
In this scenario, we can have the desktop UI in the overlay and some
other framebuffer attached to the primary plane (e.g., video). However,
userspace needs to obey some rules and avoid scenarios like the ones
described below (when enabling hw cursor):
+--------+
|Overlay |
+-------------+ +-----+-------+ +-| |--+
| +--------+ | +--------+ | | +--------+ |
| |Overlay | | |Overlay | | | |
| | | | | | | | |
| +--------+ | +--------+ | | |
| Primary | | Primary | | Primary |
+-------------+ +-------------+ +-------------+
+-------------+ +-------------+
| +--------+ | Primary |
| |Overlay | | |
| | | | |
| +--------+ | +--------+ |
| Primary | | |Overlay | |
+-------------+ +-| |--+
+--------+
If the userspace violates some of the above scenarios, our driver needs
to reject the commit; otherwise, we can have unexpected behavior. Since
we don't have a proper driver validation for the above case, we can see
some problems like a duplicate cursor in applications that use multiple
planes. This commit fixes the cursor issue and others by adding adequate
verification for multiple planes.
Change since V1 (Harry and Sean):
- Remove cursor verification from the equation.
Cc: Louis Li <Ching-shih.Li@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Polaris12 32bit ASIC needs a special MC firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
|
|
The ti_sn_gpio_unregister() is not just called from the remove path
but also from the error handling of the init path. That means it can't
have the __exit annotation.
Fixes: bf73537f411b ("drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504073845.1.Ibf4194f4252846edaa0c6a6c7b86588f75ad5529@changeid
|
|
Include the header for the prototype.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210503142710.153369-1-christian.koenig@amd.com
|
|
Make one step to pass intel_framebuffer to all intel_fb functions.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210414155208.3161335-2-imre.deak@intel.com
|
|
Cleanup the code. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6c2f6afa4c8866f8c1714b4f8dba9ea2d1509e4a.1620115983.git.jani.nikula@intel.com
|
|
Lift the masking outside of the if branches. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a87fd5e66b52c4d52a568888e1b8037841786fd2.1620115982.git.jani.nikula@intel.com
|
|
Treat it the same as the fake local-memory stuff, where it is disabled
for normal kernels, in case some random UMD is tempted to use this. Once
we have all the other bits and pieces in place, like the TTM conversion,
we can turn this on for real.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-9-matthew.auld@intel.com
|
|
All userspace objects must be cleared when allocating the backing store,
before they are potentially visible to userspace. For now use simple
CPU based clearing to do this for device local-memory objects, note that
in the near future this will instead use the blitter engine.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-8-matthew.auld@intel.com
|
|
For some internal device local-memory objects it would be useful to have
an option to CPU clear the pages upon gathering the backing store. Note
that this might be before the blitter is useable, which is the case for
some internal GuC objects.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-7-matthew.auld@intel.com
|
|
Add new extension to support setting an immutable-priority-list of
potential placements, at creation time.
If we use the normal gem_create or gem_create_ext without the
extensions/placements then we still get the old behaviour with only
placing the object in system memory.
v2(Daniel & Jason):
- Add a bunch of kernel-doc
- Simplify design for placements extension
Testcase: igt/gem_create/create-ext-placement-sanity-check
Testcase: igt/gem_create/create-ext-placement-each
Testcase: igt/gem_create/create-ext-placement-all
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-6-matthew.auld@intel.com
|
|
Same old gem_create but with now with extensions support. This is needed
to support various upcoming usecases.
v2:(Chris)
- Use separate ioctl number for gem_create_ext, instead of hijacking
the existing gem_create ioctl, otherwise we run into the issue
with being unable to detect if the kernel supports the new extension
behaviour.
- We now have gem_create_ext.flags, which should be zeroed.
- I915_GEM_CREATE_EXT_SETPARAM value is now zero, since this is the
index into our array of extensions.
- Setup a "vanilla" object which we can directly apply our extensions
to.
v3:(Daniel & Jason)
- drop I915_GEM_CREATE_EXT_SETPARAM. Instead just have each extension
do one thing only, instead of generic setparam which can cover
various use cases.
- add some kernel-doc.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-5-matthew.auld@intel.com
|
|
With the upcoming gem_create_ext we want to be able create a "vanilla"
object upfront and pass that directly to the extensions, before actually
initialising the object. Functionally this should be the same expect we
now feed the object into the lower-level region specific init_object.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-4-matthew.auld@intel.com
|
|
Returns the available memory region areas supported by the HW.
v2(Daniel & Jason):
- Add some kernel-doc, including example usage.
- Drop all the extra rsvd
v3(Jason & Tvrtko)
- add back rsvd
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-3-matthew.auld@intel.com
|
|
In the next patch we want to expose the supported regions to userspace,
which can then be fed into the gem_create_ext placement extensions. For
now treat stolen memory as private from userspace pov.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-2-matthew.auld@intel.com
|
|
It doesn't make sense to go out to the bus and read the EDID over and
over again. Let's cache it and throw away the cache when we turn power
off from the panel. Autosuspend means that even if there are several
calls to read the EDID before we officially turn the power on then we
should get good use out of this cache.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.18.If050957eaa85cf45b10bcf61e6f7fa61c9750ebf@changeid
|