| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
enable ASPM on vega to save the power
without the performance hurt.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
enable ASPM on navi1x for the benifit of system power consumption
without performance hurt.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to config GECC feature here for sriov
Leave the host drvier to do the configuration job.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When GFXCLK range is updated in manual/determinism mode, show the
updated min/max clock range.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Imporve the kernel-doc for the RAS sysfs
interface. Fix the grammar, fix the context.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add bad_page_cnt_threshold to debugfs, an optional
file system used for debugging, for reporting
purposes only--it usually matches the size of
EEPROM but may be different depending on the
"bad_page_threshold" kernel module option.
The "bad_page_cnt_threshold" is a dynamically
computed value. It depends on three things: the
VRAM size; the size of the EEPROM (or the size
allocated to the RAS table therein); and the
"bad_page_threshold" module parameter. It is a
dynamically computed value, when the amdgpu module
is run, on which further parameters and logic
depend, and as such it is helpful to see the
dynamically computed value in debugfs.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix if (ret) --> if (!ret), a bug, for
"retire_page", which caused the kernel to recall
the method with *pos == end of file, and that
bounced back with error. On the first run, we
advanced *pos, but returned 0 back to fs layer,
also a bug.
Fix the logic of the check of the result of
amdgpu_reserve_page_direct()--it is 0 on success,
and non-zero on error, not the other way
around. This patch fixes this bug.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove double-sscanf to scan for %llu and 0x%llx,
as that is not going to work!
The %llu will consume the "0" in "0x" of your
input, and the hex value you think you're entering
will always be 0. That is, a valid hex value can
never be consumed.
On the other hand, just entering a hex number
without leading 0x will either be scanned as a
string and not match, for instance FAB123, or
the leading decimal portion is scanned as the
%llu, for instance 123FAB will be scanned as 123,
which is not correct.
Thus remove the first %llu scan and leave only the
%llx scan, removing the leading 0x since %llx can
scan either.
Addresses are usually always hex values, so this
suffices.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Xinhui Pan <xinhui.pan@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add emit mem sync callback for sdma_v5_2
In amdgpu sync object test, three threads created jobs
to send GFX IB and SDMA IB in sequence. After the first
GFX thread joined, sometimes the third thread will reuse
the same physical page to store the SDMA IB. There will
be a risk that SDMA will read GFX IB in the previous physical
page. So it's better to flush the cache before commit sdma IB.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Like Arcturus, this isn't available on Aldebaran, so remove it
accordingly
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DC version 3.2.131 brings improvements in multiple areas.
In summary, we highlight:
-Enhancement for multiple eDP BL control.
-Add debug flag to enable eDP ILR by default and debugfs to repress HPD/HPR_RX IRQ.
-Fixes for DSC enable sequence,Force vsync flip,hang when psr is enabled etc.
-Firmware releases:
0.0.60
0.0.61
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
SKIP_CRTC_DISABLE bit should be applicable to all dcn asics
not only Raven.
[How]
Replace check for Raven only with check for all DCNs.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Driver currently assumes only 1 eDP is connected. Added support for
multiple eDP BL control.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to add support for new smu metrics table for vangogh.
It will support new and legacy smu metrics table in the meanwhile.
New pmfw version is 4.63.36.00, and new smu interface version is #3.
v1: check smu pmfw version to determine to use new or legacy smu metrics
table
v2: check smu interface version to determine to use new or legacy smu
metrics table
v3: revise wrong symbol
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to update the driver interface header for vangogh.
New version driver interface header will support new version pmfw
(from version 4.63.36.00) which uses new smu metrics table.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When boot into OS, seamless boot device won't blank stream.
Driver update dpp clock when scanline position in vactive will show
garbage on screen.
[How]
Wait for vblank for seamless boot edp display when driver update dpp clock.
The apply seamless boot flag will be clear when OS call SetVisibility on.
Therefore we only wait for vblank once after boot into OS.
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For debugging reasons it can be beneficial to disable any hotplug and DP shortpulse interrupt handling.
[How]
Expose a debugfs to set a flag to bypass HPD IRQ handling and skip IRQ handling if flag is set.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why/how]
Connecting clock optimization functions to dcn301 HWSS
to enable power state enter/exit optimization
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
Removing unused DSC flag which is incorrect and is not used.
We are only using stream->timing.flags.DSC for DSC's current
state. Stream state as an input parameter and should not contain
any past status flags.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Underflow observed when disabling PIP overlay in-game when
vsync is disabled, due to OTC master lock not working with
game pipe which is immediate flip.
[How]
When performing a full update, override flip_immediate value
to false for all planes, so that flip occurs on vsync.
Signed-off-by: Anthony Wang <anthony1.wang@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
If no repeaters are found, we do not need or want to attempt to
link-train repeaters, as this could cause bugs.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We're always validating DML with simple 422 DSC even if native 422 DSC
is in use.
[How]
Use the mode configuration from the timing.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Static cleanup for eDP ILR Support.
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DSC is enabled before reset link and potentially cause DSC enable fail problem.
[How]
Enable DSC after link is reseted
Signed-off-by: Mike Hsieh <chun-wei.hsieh@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
VBIOS currently sets the max link rate found in eDP 1.4 SUPPORTED_LINK_RATES table
If eDP fastboot optimizations are enabled, the link rate remains at max after init
[How]
Determine optimal link rate during boot, disable seamless boot
and eDP fastboot optimizations if link rate optimization is required
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Allow per-asic enablement of ILR feature with debug flag
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Due to changes of HW memory model, we need to change Aldebaran
MTYPEs to meet HW changes.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This new interface passes both virtual and physical address
to PSP. It is backward compatible with old interface.
v2: use a function to simplify tmr physical address calc (Lijo)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use amdgpu_gmc_vram_pa and amdgpu_gmc_vram_cpu_pa
to simplify codes. No logic change.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add one function to calculate BO's GPU physical address.
And another function to calculate BO's CPU physical address.
v2: Use functions vs macros (Christian)
Use more proper function names (Christian)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
only output ras error status if an error bit is set or error counter is set
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
only output ras error status if an error bit is set
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Keep the logic to force-use VBIOS PPTable in aldebaran rather
than in generic SMU13.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The intel_gvt_init_vgpu_type_groups() function is only called from
intel_gvt_init_device(). If it fails then the intel_gvt_init_device()
prints the error code and propagates it back again. That's a bug
because false is zero/success. The fix is to modify it to return zero
or negative error codes and make everything consistent.
Fixes: c5d71cb31723 ("drm/i915/gvt: Move vGPU type related code into gvt file")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YHaFQtk/DIVYK1u5@mwanda
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Fix the following clang warning:
drivers/gpu/drm/i915/gvt/gtt.c:590:20: warning: unused function
'ppgtt_set_guest_root_entry' [-Wunused-function].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1618294728-78952-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here for both dcss and
imx-drm drivers.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-5-daniel.vetter@ffwll.ch
|
|
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-11-daniel.vetter@ffwll.ch
|
|
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
It was slightly inconsistently though, since planes with only linear
modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport
further than where Paul's patch got added.
Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-10-daniel.vetter@ffwll.ch
|
|
If support for Blob resources is available, then dumb BOs created
by the driver can be considered as guest Blobs.
v2: Don't skip transfer and flush commands as part of plane update
as the device may have created a shared mapping. (Gerd)
v3: Don't create dumb BOs as Guest blobs if Virgl is enabled. (Gurchetan)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210413052614.2486768-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Fix redundant condition, caught in cppcheck by kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Fixes: b64d6c51380b ("drm/i915/display: Support PSR Multiple Instances")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210409231738.238682-1-jose.souza@intel.com
|
|
During cotable resize we pin the backup buffer to make sure the
trylock doesn't fail. We were never unpinning the backup buffer
resulting in every subsequent cotable resize trying to release a
pinned bo. After we copy the old backup to the new we can release
the pin.
Mob's are always pinned so we just have to make sure we unpin
them before releasing them.
Reviewed-by: Thomas Hellström (Intel) <thomas_os@shipmail.org>
Fixes: d1a73c641afd ("drm/vmwgfx: Make sure we unpin no longer needed buffers")
Link: https://patchwork.freedesktop.org/patch/msgid/20210413205938.788366-1-zackr@vmware.com
Signed-off-by: Zack Rusin <zackr@vmware.com>
|
|
Thomas has noticed that the lockdep was broken in vmwgfx. It
was broken during the pci initialization rework. This fixes
the breakage by making sure we initialize the locking code
before doing anything else. This was independently spotted
and fixed by Tetsuo Handa as well.
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8772c0bb58bbf98a ("drm/vmwgfx: Cleanup pci resource allocation")
Link: https://patchwork.freedesktop.org/patch/msgid/20210408172245.673785-1-zackr@vmware.com
|
|
We were not correctly unpinning no longer needed buffers. In particular
vmw_buffer_object, which is internally often pinned on creation wasn't
unpinned on destruction and none of the internal MOB buffers were
unpinned before being put back. Technically this existed for a
long time but commit 57fcd550eb15 ("drm/ttm: Warn on pinning without
holding a reference") introduced a WARN_ON which was filling up the
kernel logs rather quickly.
Quite frankly internal usage of vmw_buffer_object and in general
pinning needs to be refactored in vmwgfx but for now this makes
it work.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Fixes: 57fcd550eb15 ("drm/ttm: Warn on pinning without holding a reference")
Link: https://patchwork.freedesktop.org/patch/414984/?series=86052&rev=1
Cc: Huang Rui <ray.huang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
|
|
The address-of op in front of an array is just an alias to using the
array on its own, so drop the op.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412232413.2755054-2-imre.deak@intel.com
|
|
In case AUX failures happen unexpectedly during a modeset, the driver
should still complete the modeset. In particular the driver should
perform the link training sequence steps even in case of an AUX failure,
as this sequence also includes port initialization steps. Not doing that
can leave the port/pipe in a broken state and lead for instance to a
flip done timeout.
Fix this by continuing with link training (in a no-LTTPR mode) if the
DPRX DPCD readout failed for some reason at the beginning of link
training. After a successful connector detection we already have the
DPCD read out and cached, so the failed repeated read for it should not
cause a problem. Note that a partial AUX read could in theory partly
overwrite the cached DPCD (and return error) but this overwrite should
not happen if the returned values are corrupted (due to a timeout or
some other IO error).
Kudos to Ville to root cause the problem.
Fixes: 264613b406eb ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3308
Cc: stable@vger.kernel.org # 5.11
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412232413.2755054-1-imre.deak@intel.com
|
|
Make them independent so we can use DGFX_FEATURES more generically.
For future platforms that do not use the GEN nomenclature we will define
graphics, media and display separately, so we avoid setting graphics_ver
with the GEN() macro.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-13-lucas.demarchi@intel.com
|
|
Since we are now converting from a single gen version to graphics_ver,
media_ver and display_ver, add the last 2 when printing the device info.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-12-lucas.demarchi@intel.com
|
|
Now that it's not being used anymore, finish its removal. Like for
gen_mask, we replace INTEL_GEN() and IS_GEN() macros to use the new
field.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Jani: Minor code comment change while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-11-lucas.demarchi@intel.com
|
Kenneth Feng
Jack Zhang
Lijo Lazar
Luben Tuikov
Jinzhou Su
Kent Russell
Anthony Koo
Aric Cyr
Roman Li
Jake Wang
Xiaojian Du
Lewis Huang
Harry Wentland
Mikita Lipski
Anthony Wang
Wesley Chalmers
Nicholas Kazlauskas
Michael Strauss
Mike Hsieh
Eric Huang
Oak Zeng
John Clements
Dan Carpenter
Jiapeng Chong
Daniel Vetter
Vivek Kasireddy
José Roberto de Souza
Zack Rusin
Imre Deak
Lucas De Marchi