aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2021-02-02drm/amd/display: 3.2.121Aric Cyr1-1/+1
This version brings along following fixes: - Better handling of dummy p-state table - Workaround for some legacy DP-VGA dongles - Add Freesync HDMI support to DMCU - Enable "trigger_hotplug" debugfs on all outputs - fix initial bounding box values for dcn3.02 - implement support for DID2.0 dsc passthrough - fix calculation for the pwl backlight curve - Fix multiple memory leaks Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: [FW Promotion] Release 0.0.50Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Reject too small viewport size when validating planeNikola Cornij3-3/+29
[why] Overlay won't move to a new positon if viewport size is smaller than what can be handled. It'd either disappear or stay at the old position. This condition is for example hit if overlay is moved too much outside of left or top edge of the screen, but it applies to any non-cursor plane type. [how] Reject this contidion at validation time. This gives the calling level a chance to handle this gracefully and avoid inconsistent behaivor. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Better handling of dummy p-state tableJoshua Aberback1-7/+5
[Why] Some scenarios where we use a UCLK frequency in between dummy p-state table entries result in a p-state hang, due to the table not having a close enough match, so the default DPM0 latency is used, which can be too long to support dummy p-state switching in these scenarios. [How] - old: match if current freq is within +- margin of table entry - new: find largest table entry that is lower than current freq + margin - lower than DPM0 will still use DPM0 Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Workaround for some legacy DP-VGA donglesTaimur Hassan1-1/+12
[Why] Maximum resolution is 1440*900 when connecting to FHD monitor via some DP-VGA dongles. The display EDID reading fails over AUX/I2C via DP->VGA dongle, and this leads to the maximum resolution 1920*1080 cannot be obtained from EDID. [How] Provide a workaround for some legacy DP-VGA dongles with a longer aux delay. Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Decrement refcount of dc_sink before reassignmentVictor Lu1-1/+3
[why] An old dc_sink state is causing a memory leak because it is missing a dc_sink_release before a new dc_sink is assigned back to aconnector->dc_sink. [how] Decrement the dc_sink refcount before reassigning it to a new dc_sink. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Free atomic state after drm_atomic_commitVictor Lu1-8/+6
[why] drm_atomic_commit was changed so that the caller must free their drm_atomic_state reference on successes. [how] Add drm_atomic_commit_put after drm_atomic_commit call in dm_force_atomic_commit. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: remove unused force_ignore_link_settings debug optionWenjing Liu2-4/+0
[why] Remove force_ignore_link_settings debug option as it is no longer used. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add Freesync HDMI support to DMCUStylon Wang6-1/+268
[Why] Adding support for Freesync HDMI to DC and DMCU [How] Create DC interface and implementation on top of DMCU to support parsing CEA blocks in DMCU. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Enable "trigger_hotplug" debugfs on all outputsStylon Wang1-4/+6
[Why] Per-connector debugfs entry "trigger_hotplug" is available on DP/eDP only. New IGT tests need this entry to test other outputs. [How] Enable this debugfs entry on all types of connectors Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix CW4 programming for dmub30 cached inboxNicholas Kazlauskas3-2/+4
[Why] The conditions for whether we used cached vs non-cached inbox1 depend on a version check that mismatches what the shared helpers in dmub20 implement. [How] Use the dmub_dcn20_use_cached_inbox check for dmub_dcn30 as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: fix initial bounding box values for dcn3.02Samson Tam3-10/+184
[Why] Initial bounding box values are updated in dcn30_update_bw_bounding_box but they use dcn3_0_soc and dcn3_0_ip instead of dcn3_02_soc and dcn3_02_ip [How] Add dcn302_update_bw_bounding_box and dcn302_get_optimal_dcfclk_fclk_for_uclk so it uses dcn3_02_soc and dcn3_02_ip. Use sr_exit_time_us, sr_enter_plus_exit_time_us, from dcn30 on dcn302 to fix flicker on eDP. Also use dram_clock_change_latency_us from dcn30. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: implement support for DID2.0 dsc passthroughJun Lei3-14/+23
[Why] Some panels contain active converters (e.g. DP to MIPI) which only support restricted DSC configurations. DID2.0 adds support for such displays to explicitly define per timing BPP restrictions on DSC. Ignoring these restrictions leads to blackscreen. [How] Add parsing in DID2.0 parser to get this bpp info. Add support in DSC module to constraint target bpp based on this info. Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix dc_sink kref count in emulated_link_detectVictor Lu1-2/+2
[why] prev_sink is not used anywhere else in the function and the reference to it from dc_link is replaced with a new dc_sink. [how] Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink). Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Release DSC before acquiringMikita Lipski1-1/+5
[why] Need to unassign DSC from pipes that are not using it so other pipes can acquire it. That is needed for asic's that have unmatching number of DSC engines from the number of pipes. [how] Before acquiring dsc to stream resources, first remove it. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Eryk Brol <Eryk.Brol@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Revert "Fix EDID parsing after resume from suspend"Stylon Wang1-2/+0
This reverts commit b24bdc37d03a0478189e20a50286092840f414fa. It caused memory leak after S3 on 4K HDMI displays. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: fix calculation for the pwl backlight curveAnthony Koo1-1/+1
[Why] The PWL backlight curve is used by the firmware to convert between brightness and linear PWM value. Driver has a backlight LUT, but the firmware holds a PWL curve and interpolates between points. The calculations are incorrect leading to slightly off backlight values being programmed. [How] Fix the PWL backlight curve threshold/offset calculations Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: 3.2.120Aric Cyr1-1/+1
This DC update brings improvements in multiple areas. In summary, we highlight: - Fix display detection on HDMI ComboPHY - Drop SOC bounding box hookup - Fix DPCD values Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: [FW Promotion] Release 0.0.49Anthony Koo1-2/+3
- Add field for passing line time for a frame Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add more Clock Sources to DCN2.1Sung Lee1-0/+10
[WHY] When enabling HDMI on ComboPHY, there are not enough clock sources to complete display detection. [HOW] Initialize more clock sources. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: correct some hdcp variable namingWenjing Liu6-17/+19
[why] In HDCP update stream config interface, some variables are named as xxx_supported, but in fact the variable indicates whether or not xxx_enabled. Correct the naming so it is less confusing to read the code. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Set power_gated to true for seamless boot pipe initLewis Huang1-0/+1
[Why] In seamless boot without a flip case, the flag power_gated didn't get cleared when resetting path mode because the plane_state is null. The following sequence will cause this issue: 1. OS call set mode to clone/extended 2. Reset path mode to remove edp [How] Set power gated default to true in seamless boot pipe Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: reuse current context instead of recreating oneBhawanpreet Lakha3-23/+30
[Why] Currently we discard the current context and recreate it. The current context is what is applied to the HW so we should be re-using this rather than creating a new context. Recreating the context can lead to mismatch between new context and the current context For example: gsl groups get changed when we create a new context this can cause issues in a multi display config (with flip immediate) because we don't align the existing gsl groups in the new and current context. If we reuse the current context the gsl group assignment stays the same. [How] Instead of discarding the current context, we instead just copy the current state and add/remove planes and streams. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add null pointer check to is_dig_enabled funcMichael Strauss1-1/+2
[WHY] Safeguarding as pointer may be null in diagnostic environment Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: initialize i2c speed if not initialized in dcnxxx__resource.cBrendan Steve Leder1-0/+4
Some dcnxxx__resource.c do not initialize the i2c speed; this patch adds the required initialization at dc_construct(). Signed-off-by: Brendan Steve Leder <brendanSteve.Leder@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVALGeorge Shen1-3/+3
[Why] The translation between the DPCD value and the specified AUX_RD_INTERVAL in the DP spec do not match. [How] Update values to match the spec. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Drop SOC bounding box hookup in DM/DCNicholas Kazlauskas6-330/+4
[Why] There aren't any ASIC where we use these binaries and they aren't useful for future use since it's inconvenient to extend and maintain these structures. [How] Drop the support from DM and DC for now. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: enable freesync for A+A configsChristian König2-3/+7
Some newer APUs can scanout directly from GTT, that saves us from allocating another bounce buffer in VRAM and enables freesync in such configurations. Without this patch creating a framebuffer from the imported BO will fail and userspace will fall back to a copy. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/pm: remove some useless code for vangoghXiaojian Du1-3/+0
This patch is to remove some useless code for vangogh. In the earlier code, vangogh can't finish all the sequence of smu late init. But now vangogh has one stable work state,so remove the useless code. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/pm: fill in the data member of v2 gpu metrics table for vangoghXiaojian Du1-0/+3
This patch is to fill in the data member of v2 gpu metrics table for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu/gfx10: update CGTS_TCC_DISABLE and CGTS_USER_TCC_DISABLE register offsets for VGHchen gong1-2/+16
For Vangogh: The offset of the CGTS_TCC_DISABLE is 0x5006 by calculation. The offset of the CGTS_USER_TCC_DISABLE is 0x5007 by calculation. Signed-off-by: chen gong <curry.gong@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: Fix a false positive when pin non-VRAM memoryxinhui pan1-1/+2
Flag TTM_PL_FLAG_CONTIGUOUS is only valid for VRAM domain. So fix the false positive by checking memory type too. Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: Limit the maximum size of contiguous VRAM that can be encapsulated by an instance of DRM memory nodeRamesh Errabolu1-0/+3
[Why] Enable 1:1 mapping between VRAM of a DRM node and a scatterlist node [How] Ensure construction of DRM node to not exceed specified limit Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/vmwgfx: Fix some memory leaks on errorsZack Rusin1-5/+4
Dan noticed some issues with pci_release_region, this builds upon that and fixes some other lingering issues. As part of this we also can stop trying to manually free our managed device; there's no need for it, it will be cleaned up automatically for us. Fixes: 8772c0bb58bb ("drm/vmwgfx: Cleanup pci resource allocation") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128173756.121525-1-zackr@vmware.com
2021-02-02drm/vc4: hvs: Fix buffer overflow with the dlist handlingMaxime Ripard1-4/+14
Commit 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") changed the LBM allocation logic from first allocating the LBM memory for the plane to running mode_set, adding a gap in the LBM, and then running the dlist allocation filling that gap. The gap was introduced by incrementing the dlist array index, but was never checking whether or not we were over the array length, leading eventually to memory corruptions if we ever crossed this limit. vc4_dlist_write had that logic though, and was reallocating a larger dlist array when reaching the end of the buffer. Let's share the logic between both functions. Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Eric Anholt <eric@anholt.net> Fixes: 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129160647.128373-1-maxime@cerno.tech
2021-02-02drm/vc4: remove unneeded variable: "ret"Bernard Zhao1-2/+1
remove unneeded variable: "ret". Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com
2021-02-02drm/amdkfd: fix null pointer panic while free buffer in kfdHuang Rui1-10/+6
In drm_gem_object_free, it will call funcs of drm buffer obj. So kfd_alloc should use amdgpu_gem_object_create instead of amdgpu_bo_create to initialize the funcs as amdgpu_gem_object_funcs. [ 396.231390] amdgpu: Release VA 0x7f76b4ada000 - 0x7f76b4add000 [ 396.231394] amdgpu: remove VA 0x7f76b4ada000 - 0x7f76b4add000 in entry 0000000085c24a47 [ 396.231408] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 396.231445] #PF: supervisor read access in kernel mode [ 396.231466] #PF: error_code(0x0000) - not-present page [ 396.231484] PGD 0 P4D 0 [ 396.231495] Oops: 0000 [#1] SMP NOPTI [ 396.231509] CPU: 7 PID: 1352 Comm: clinfo Tainted: G OE 5.11.0-rc2-custom #1 [ 396.231537] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS WCD0401N_Weekly_20_04_0 04/01/2020 [ 396.231563] RIP: 0010:drm_gem_object_free+0xc/0x22 [drm] [ 396.231606] Code: eb ec 48 89 c3 eb e7 0f 1f 44 00 00 55 48 89 e5 48 8b bf 00 06 00 00 e8 72 0d 01 00 5d c3 0f 1f 44 00 00 48 8b 87 40 01 00 00 <48> 8b 00 48 85 c0 74 0b 55 48 89 e5 e8 54 37 7c db 5d c3 0f 0b c3 [ 396.231666] RSP: 0018:ffffb4704177fcf8 EFLAGS: 00010246 [ 396.231686] RAX: 0000000000000000 RBX: ffff993a0d0cc400 RCX: 0000000000003113 [ 396.231711] RDX: 0000000000000001 RSI: e9cda7a5d0791c6d RDI: ffff993a333a9058 [ 396.231736] RBP: ffffb4704177fdd0 R08: ffff993a03855858 R09: 0000000000000000 [ 396.231761] R10: ffff993a0d1f7158 R11: 0000000000000001 R12: 0000000000000000 [ 396.231785] R13: ffff993a0d0cc428 R14: 0000000000003000 R15: ffffb4704177fde0 [ 396.231811] FS: 00007f76b5730740(0000) GS:ffff993b275c0000(0000) knlGS:0000000000000000 [ 396.231840] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 396.231860] CR2: 0000000000000000 CR3: 000000016d2e2000 CR4: 0000000000350ee0 [ 396.231885] Call Trace: [ 396.231897] ? amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x24c/0x25f [amdgpu] [ 396.232056] ? __dynamic_dev_dbg+0xcd/0x100 [ 396.232076] kfd_ioctl_free_memory_of_gpu+0x91/0x102 [amdgpu] [ 396.232214] kfd_ioctl+0x211/0x35b [amdgpu] [ 396.232341] ? kfd_ioctl_get_queue_wave_state+0x52/0x52 [amdgpu] Fixes: 246cb7e49a70 ("drm/amdgpu: Introduce GEM object functions") Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Changfeng <changzhu@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: fix the issue that retry constantly once the buffer is oversizeHuang Rui1-1/+1
We cannot modify initial_domain every time while the retry starts. That will cause the busy waiting that unable to switch to GTT while the vram is not enough. Fixes: f8aab60422c3 ("drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs") Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/i915/dp: Fix LTTPR vswing/pre-emp setting in non-transparent modeImre Deak3-10/+14
The DP PHY vswing/pre-emphasis level programming the driver does is related to the DPTX -> first LTTPR link segment only. Accordingly it should be only programmed when link training the first LTTPR and kept as-is when training subsequent LTTPRs and the DPRX. For these latter PHYs the vs/pe levels will be set in response to writing the DP_TRAINING_LANEx_SET_PHY_REPEATERy DPCD registers (by an upstream LTTPR TX PHY snooping this write access of its downstream LTTPR/DPRX RX PHY). The above is also described in DP Standard v2.0 under 3.6.6.1. While at it simplify and add the LTTPR that is link trained to the debug message in intel_dp_set_signal_levels(). Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-2-imre.deak@intel.com (cherry picked from commit 67fba3f1c73b83569d171ae1fa463a537bbfe0a8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915/dp: Move intel_dp_set_signal_levels() to intel_dp_link_training.cImre Deak4-21/+20
intel_dp_set_signal_levels() is needed for link training, so move it to intel_dp_link_training.c. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-1-imre.deak@intel.com (cherry picked from commit 1c6e527d6947ea77bebabe15bbeaa765a87b70ca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915: Fix the MST PBN divider calculationImre Deak1-1/+3
Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit) value for MST streams if the link parameters (link rate or lane count) are limited in a way independent of the sink capabilities (reported by DPCD). One example of such a limitation is when a MUX between the sink and source connects only a limited number of lanes to the display and connects the rest of the lanes to other peripherals (USB). Another issue is that atm MST core calculates the divider based on the backwards compatible DPCD (at address 0x0000) vs. the extended capability info (at address 0x2200). This can result in leaving some part of the MST BW unused (For instance in case of the WD19TB dock). Fix the above two issues by calculating the PBN divider value based on the rate and lane count link parameters that the driver uses for all other computation. Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977 Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjala <ville.syrjala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com (cherry picked from commit b59c27cab257cfbff939615a87b72bce83925710) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/dp/mst: Export drm_dp_get_vc_payload_bw()Imre Deak1-6/+18
This function will be needed by the next patch where the driver calculates the BW based on driver specific parameters, so export it. At the same time sanitize the function params, passing the more natural link rate instead of the encoding of the same rate. v2: - Fix function documentation. (Lyude) Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com (cherry picked from commit a321fc2b4e60fc1b39517d26c8104351636a6062) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm: replace drm_modeset_lock_all() in drm_client_modeset_dpms_legacy()Joseph Schulte1-2/+5
This patch helps complete Use DRM_MODESET_LOCK_ALL* helpers instead of boilerplate todo in Documentation/gpu/todo.rst Signed-off-by: Joseph Schulte <joeschulte.js@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210125144815.8389-1-joeschulte.js@gmail.com
2021-02-02amba: Make the remove callback return voidUwe Kleine-König1-3/+1
All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2021-02-02Merge tag 'topic/drm-device-pdev-2021-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-nextJani Nikula41-96/+97
Driver Changes: - drm/i915: Remove references to struct drm_device.pdev Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2g6fxxv.fsf@intel.com
2021-02-02drm/i915/gvt: Remove references to struct drm_device.pdevThomas Zimmermann5-18/+19
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-4-tzimmermann@suse.de
2021-02-02drm/i915/gt: Remove references to struct drm_device.pdevThomas Zimmermann5-12/+12
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-3-tzimmermann@suse.de
2021-02-02drm/i915: Remove references to struct drm_device.pdevThomas Zimmermann31-66/+66
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. v6: * also remove assignment in selftests/ in a later patch (Chris) v5: * remove assignment in later patch (Chris) v3: * rebased v2: * move gt/ and gvt/ changes into separate patches Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-2-tzimmermann@suse.de
2021-02-02drm/i915/gem: Drop lru bumping on display unpinningChris Wilson4-53/+4
Simplify the frontbuffer unpin by removing the lock requirement. The LRU bumping was primarily to protect the GTT from being evicted and from frontbuffers being eagerly shrunk. Now we protect frontbuffers from the shrinker, and we avoid accidentally evicting from the GTT, so the benefit from bumping LRU is no more, and we can save more time by not. Reported-and-tested-by: Matti Hämäläinen <ccr@tnsp.org> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2905 Fixes: c1793ba86a41 ("drm/i915: Add ww locking to pin_to_display_plane, v2.") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk (cherry picked from commit 14ca83eece9565a2d2177291ceb122982dc38420) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915/gt: Close race between enable_breadcrumbs and cancel_breadcrumbsChris Wilson1-2/+4
If we enable_breadcrumbs for a request while that request is being removed from HW; we may see that the request is active as we take the ce->signal_lock and proceed to attach the request to ce->signals. However, during unsubmission after marking the request as inactive, we see that the request has not yet been added to ce->signals and so skip the removal. Pull the check during cancel_breadcrumbs under the same spinlock as enabling so that we the two tests are consistent in enable/cancel. Otherwise, we may insert a request onto ce->signals that we expect should not be there: intel_context_remove_breadcrumbs:488 GEM_BUG_ON(!__i915_request_is_complete(rq)) While updating, we can note that we are always called with irqs-disabled, due to the engine->active.lock being held at the single caller, and so remove the irqsave/restore making it symmetric to enable_breadcrumbs. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2931 Fixes: c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210119162057.31097-1-chris@chris-wilson.co.uk (cherry picked from commit e7004ea4f5f528f5a5018f0b70cab36d25315498) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.