aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2020-10-06dma-mapping: split <linux/dma-mapping.h>Christoph Hellwig2-1/+2
Split out all the bits that are purely for dma_map_ops implementations and related code into a new <linux/dma-map-ops.h> header so that they don't get pulled into all the drivers. That also means the architecture specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h> any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06drm/nouveau/ttm: memcpy waits for bo alreadyDave Airlie1-3/+1
no need for driver to wait here. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-29-airlied@gmail.com
2020-10-06drm/nouveau/ttm: handle ttm moves properly.Dave Airlie1-0/+12
The idea is to flip the core over to calling the driver always, so add support for moves here. Signed-off-by: Dave Airlie <airlied@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-6-airlied@gmail.com
2020-10-05lib/scatterlist: Add support in dynamic allocation of SG table from pagesMaor Gottlieb2-12/+15
Extend __sg_alloc_table_from_pages to support dynamic allocation of SG table from pages. It should be used by drivers that can't supply all the pages at one time. This function returns the last populated SGE in the table. Users should pass it as an argument to the function from the second call and forward. As before, nents will be equal to the number of populated SGEs (chunks). With this new extension, drivers can benefit the optimization of merging contiguous pages without a need to allocate all pages in advance and hold them in a large buffer. E.g. with the Infiniband driver that allocates a single page for hold the pages. For 1TB memory registration, the temporary buffer would consume only 4KB, instead of 2GB. Link: https://lore.kernel.org/r/20201004154340.1080481-2-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-05drm/i915/dg1: Wait for pcode/uncore handshake at startupMatt Roper4-0/+23
DG1 does some additional pcode/uncore handshaking at boot time; this handshaking must complete before various other pcode commands are effective and before general work is submitted to the GPU. We need to poll a new pcode mailbox during startup until it reports that this handshaking is complete. The bspec doesn't give guidance on how long we may need to wait for this handshaking to complete. For now, let's just set a really long timeout; if we still don't get a completion status by the end of that timeout, we'll just continue on and hope for the best. v2 (Lucas): Rename macros to make clear the relation between command and result (requested by José) Bspec: 52065 Cc: Clinton Taylor <Clinton.A.Taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201001063917.3133475-2-lucas.demarchi@intel.com
2020-10-05drm/i915: don't conflate is_dgfx with fake lmemLucas De Marchi2-3/+1
When using fake lmem for tests, we are overriding the setting in device info for dgfx devices. Current users of IS_DGFX() except one are correct. However, as we add support for DG1, we are going to use it in additional places to trigger dgfx-only code path. In future if we need we can use HAS_LMEM() instead of IS_DGFX() in the places that make sense to also contemplate fake lmem use. v2: update gen8_gmch_probe() to use HAS_LMEM(): we need to steal the mappable aperture later(which is fine since it doesn't exist on "DGFX"), and use it as a substitute for LMEMBAR. The !mappable aperture property is also useful since it exercises some other parts of the code too. (Matthew Auld) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201001063917.3133475-1-lucas.demarchi@intel.com
2020-10-05drm/amd/display: 3.2.106Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: [FW Promotion] Release 0.0.36Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Only flush inst_fb if backdoor loadingAlvin Lee1-8/+9
[Why] DAL resume from BACO time is longer if we always flush inst_fb [How] Check if backdoor loading to flush inst_fb Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Program meta addresses correctlyAlvin Lee2-0/+4
[Why] When forcing 3D mode in DAL, we set the right address to be the same as the left address. We need to do the same for the meta addresses. [How] Program right meta to be same as left meta. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Hardcode 45W Bounding Box for DCN2.1 DiagsSung Lee1-81/+34
[WHY] Currently construction of clock limits gets skipped for diags. This logic would be useful to get tested in diags. [HOW] Copy existing states to clk_table such that update_bw_bounding_box logic gets used to fill the table. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: FreeSync not active near lower bound of non-LFC monitor rangeAric Cyr1-4/+6
[Why] On narrow range monitors without LFC, a margin prevents good utilization of the available range. [How] Decrease the margin for exiting fixed mode and fix the frame counter to reset if a non-consecutive render is found. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Fix OPTC_DATA_FORMAT programmingDmytro Laktyushkin3-16/+11
This should be programmed with timing rather than with odm. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Add i2c speed arbitration for dc_i2c and hdcp_i2cCharlene Liu11-3/+20
[why] HDCP 1.4 failed on SL8800 SW w/a test driver use. [how] Slow down the HW i2c speed when used by HW i2c. This request: each acquired_i2c_engine setup the i2c speed needed and sets the I2c engine for HDCP use at release_engine. This covers SW using HW i2c engine and HDCP using HW i2c engine. for dmcu using HW i2c engine, needs add similar logic in dmcu fw. Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Block ABM in case of eDP ODMYongqiang Sun6-0/+24
[Why] enable ODM on eDP panel with ABM will result in color difference on the panel due to only one ABM module to set one pipe. [How] Block ABM in case of ODM enabled on eDP. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Copy WM values from set A to other sets in hw_initJoshua Aberback3-0/+47
[Why] When we transfer the WM range table to SMU, they can perform a watermark switch right away. This can be a problem if we're in not in accelerated mode during hw_init as SMU may initiate a dummy p-state change before the rest of the watermarks are programmed. Watermark set A is defined to be sufficient for all cases, so we can copy the values from set A to all other sets, avoiding any issues from SMU doing WM switches. [How] - new hubbub func init_watermarks - copy register values from set A to all other sets - call init_watermarks before calling notify_wm_ranges Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Force enable pstate on driver unloadJoshua Aberback7-6/+29
[Why] During driver unload, it is expected that p-state switching is supported. If it's not supported, PMFW will hang due to a forced p-state switch. Even if the current timing does not support p-state normally, we still want to force allow because the worst that can happen is underflow. This will match Navi10 behaviour. [How] - new hubbub func to control the force pstate register - force allow when releasing display ownership - registers are inaccessible after due to m_cgs.hwNotAvailable - explicitly disable force signal during hw_init - if driver is disabled and re-enabled, register not cleared otherwise Also, remove DCN3 part of dcn10_init_hw, we will not be going back to it. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Fixed comments (uniform style)Felipe1-22/+23
[WHY] This change was implemented because the comment style was not uniform across the file. In some lines comments were initiated with // and in others they were in between /* ... */. Additionally, the style for multi-line comments was also not uniform and some comment lines were missing the space between the opening /* and the first word of the comment. [HOW] All comments are now in between /*.../*, multi line comments also use /*...*/ and for every comment there is now a space between the opening /* and the first word of the comment. Signed-off-by: Felipe <Felipe.Clark@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Check for flip pending before locking pipesAric Cyr4-83/+88
[Why] When running games or benchmarking with v-sync disabled, disabling a plane (which is v-sync) can cause underflow. This is caused by flips pending before pipe locking being applied after locks are released and pipes could have been re-arranged or disconnected. This could potentially apply a flip on incorrect pipe. Also, previous logic of always locking pipes was unnecessary. [How] Only lock the pipes when there is a pipe being disabled to increase efficiency. Before the pipes are locked, check that any pending flips are cleared to ensure the flips are applied to the correct pipe. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Don't allow pstate if no support in blankAlvin Lee1-1/+1
[Why] We will hang if we report switch in VACTIVE but not in VBLANK and DPG_EN = 1 [How] Block switch in ACTIVE if not supported in BLANK Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: 3.2.105Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add van gogh pci idHuang Rui1-0/+3
Add Van Gogh PCI id support. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Add dcn3.01 support to DMRoman Li1-0/+26
Update dm for vangogh support. Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Add dcn3.01 support to DC (v2)Roman Li48-33/+5232
Update dc for vangogh support. v2: fix compilation without DCN 301 set. Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: enable gfx clock gating and power gating for vangoghHuang Rui1-2/+5
This patch is to enable the gfx cg and pg for vangogh. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add gfx power gating for gfx10Huang Rui1-0/+24
This patch adds power gating handler for gfx10. v2: simplify function Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu/mmhub2.3: print client id string for mmhubAlex Deucher1-6/+43
Print the name of the client rather than the number. This makes it easier to debug what block is causing the fault. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: IP discovery table is not ready yet for VGAlex Deucher1-0/+4
Fallback to legacy path for now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: disable gfxoff on vangogh for the moment (v2)Huang Rui1-0/+1
GFXOFF will be enabled once it's verified on real asic. v2: move check into gfx10 module. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: enable psp support for vangoghHuang Rui4-2/+9
This patch is to enable psp support for vangogh Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add TOC firmware support for apu (v3)Huang Rui4-10/+77
APU needs load toc firmware for gfx10 series on psp front door loading. v2: rebase against latest code v3: clarify error message Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add smu ip block for vangoghHuang Rui1-0/+1
This patch is to add ip block for vangogh. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/powerplay: add vangogh ppt into swSMUHuang Rui2-0/+5
This patch is to add vangogh ppt funcions into swSMU block. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/powerplay: partially enable swsmu for vangoghHuang Rui1-0/+6
This patch is to partially enable swSMU for vangogh for the moment. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu/powerplay: add smu initialize funcitons for vangogh (v4)Xiaojian Du2-0/+384
This patch is to add smu initialize functions for vangogh. v2: squash in updates v3: drop duplicate table entries v4: rebase fixes Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu/powerplay: add vangogh asic name in smu v11 (v2)Xiaojian Du2-0/+4
This patch is to add vangogh asic name in smu v11. v2: drop smu firmware name (N/A for VG) Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu/powerplay: add smu v11.5 smc header for vangoghXiaojian Du1-0/+86
This patch is to add smu v11.5 smc header for vangogh. Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu/powerplay: add smu v11.5 firmware header for vangogh (v2)Xiaojian Du1-0/+120
This patch is to add smu v11.5 firmware header for vangogh v2: squash in updates Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/admgpu/powerplay: add smu v11.5 driver interface header for vangoghXiaojian Du1-0/+239
This patch is to add smu v11.5 driver interface header for vangogh. Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu/powerplay: add new smu messages and feature masks for vangogh (v2)Xiaojian Du1-6/+47
This patch is to add new smu messages and feature masks for vangogh. v2: squash in updates and typo fixes Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add nbio v7.2 for vangogh (v2)Huang Rui4-3/+383
VanGogh uses nbio v7.2, and a couple of offsets are changed since nbio v2.3 for navi series, so add new nbio v7.2 block. v2: squash in fix for sdma and vcn instances Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add pcie port indirect read and write on nvHuang Rui2-0/+34
This patch is to add pcie port indirect read/write callback for nv series. They will be used for new asic. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: enable vcn3.0 for van goghThong Thai2-0/+10
Same as other VCN 3.0 asics. Signed-off-by: Thong Thai <thong.thai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add mmhub v2.3 for vangogh (v4)Huang Rui4-2/+590
There are too many register offset mismatch between mmhub v2.0 and v2.3. E.X: mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3) mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3) mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32: 0x072b(v2.0) 0x0940(v2.3) mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32: 0x072c(v2.0) 0x0941(v2.3) mmMMVM_INVALIDATE_ENG0_REQ: 0x06e3(v2.0) 0x0a01(v2.3) mmMMVM_INVALIDATE_ENG0_ACK: 0x06f5(v2.0) 0x0a02(v2.3) mmMMVM_CONTEXT0_CNTL: 0x06c0(v2.0) 0x0740(v2.3) mmMMVM_L2_PROTECTION_FAULT_STATUS: 0x068c(v2.0) 0x070c(v2.3) mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3) mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3) mmDAGB0_CNTL_MISC2: 0x0071(v2.0) 0x0096(v2.3) ... Continuing using the same file mmhub v2.0 is not good choice, it will introduce a lot of checking with ASIC types. And also easy to introduce the issues that offset not align, this kind of issues are really hard to find. Van Gogh's mmhub vm invalidation is actually caused by the offset mismatch as well. So it would like to create a new file rather than stick to re-use orignal mmhub v2.0 here. v2: add missed translate_further programming. v3: sync with latest code v4: add missing callbacks Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdkfd: add Van Gogh KFD supportHuang Rui6-0/+29
This patch is to add GFX10 based APU Van Gogh KFD support. We will treat Van Gogh as "dgpu" (bypass IOMMU v2). Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: set ip blocks for van goghHuang Rui1-0/+9
Enable ip blocks for van gogh. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add sdma support for van goghHuang Rui1-0/+10
This patch adds the sdma v5.2 support for van gogh. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu/gfx10: add updated register offsets for VGHAlex Deucher1-2/+16
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add gfx golden settings for vangogh (v3)Huang Rui1-1/+35
This patch is to add gfx golden settings for vangogh post si. v2: squash in updates v3: fix SPI register offset Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amdgpu: add gfx support for van gogh (v3)Huang Rui1-1/+28
Add van gogh checks to gfx10 code. v2: squash in fixes v3: fix mode Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.