aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2020-09-22drm/amd/display: 3.2.104Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: [FW Promotion] Release 0.0.34Anthony Koo1-3/+8
[Header Changes] - Add new SCRATCH0 status bits for detecting restore state Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: TMDS Fallback transitionChris Park2-0/+15
[Why] HDMI requires fallback to TMDS by redetection in order to switch PHY settings. This avoids black out when link training fail during mode setting, link quality update, disable driver sequence. [How] Allow driver to redetect HDMI displays based on retraining or fallback mechanism. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: Check for flip pending before locking pipes.Taimur Hassan4-13/+14
[Why] When running a game/benchmark with v-sync disabled, disabling a plane (which is v-sync) can cause an underflow. This is due to flips that are pending before pipe locking being applied after locks are released and pipes have been re-arranged or disconnected. This can potentially apply a flip on the incorrect pipe. [How] Check that any pending flips are cleared before locking any pipes to ensure flips are applied on the correct pipes. Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: Implement PSR wait for enable/disableWyatt Wood3-3/+28
[Why] For DMUB implementation of PSR, the 'wait' parameter, used to determine if driver should wait for PSR enable/disable, is not implemented correctly. [How] Implement wait for PSR enable/disable. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: allow DP RX to use more cr aux rd interval delayWenjing Liu1-1/+18
[why] Regression is caused by previous change with attempt to correct the extended cr aux rd interval delay due to mis interpretation of the DP specs. The change turns out not working well with certain RXs. So we decided to keep the cr aux rd interval logic as before. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: Enable DP YCbCr420 mode support for DCN10Gary Li1-1/+1
[WHY] In DCN10 when a panel with YCbCr420 capability is connected via USB-C to HDMI active dongle, no YCbCr420 option is listed in Radeon settings. [HOW] Enable DP YCbCr420 mode support for DCN10 Signed-off-by: Gary Li <gary.li@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: Increase timeout for DP DisableWesley Chalmers1-2/+2
[WHY] When disabling DP video, the current REG_WAIT timeout of 50ms is too low for certain cases with very high VSYNC intervals. [HOW] Increase the timeout to 102ms, so that refresh rates as low as 10Hz can be handled properly. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org>
2020-09-22drm/amd/display: Fix ODM policy implementationWesley Chalmers1-5/+6
[WHY] Only the leftmost ODM pipe should be offset when scaling. A previous code change was intended to implement this policy, but a section of code was overlooked. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org>
2020-09-22drm/amd/display: eDP intermittent black screen during PnPPeikang Zhang6-0/+7
[Why] We dont's turn off backlight before power off eDP (VDD), which is a violation of eDP specs. [How] Power off eDP backlight before power off eDP Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: Bug in dce_is_panel_backlight_on()Peikang Zhang2-3/+11
[Why] dce_is_panel_backlight_on() will return wrong value if LVTMA_BLON_OVRD is 0 [How] When LVTMA_BLON_OVRD is 0, read LVTMA_PWRSEQ_TARGET_STATE instead Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: 3.2.103Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: [FW Promotion] Release 0.0.33Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: Fix incorrect backlight register offset for DCNDavid Galiffi1-1/+1
[Why] Typo in backlight refactor introduced wrong register offset. [How] SR(BIOS_SCRATCH_2) to NBIO_SR(BIOS_SCRATCH_2). Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org>
2020-09-22drm/amdkfd: Use kvmalloc instead of kmalloc for VCRATKent Russell1-4/+5
Since we're dynamically allocating the CPU VCRAT, use kvmalloc in case the allocation size is huge. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amdkfd: Fix kfd init stack dumpPhilip Cox1-5/+0
amdkfd is dumping a stack during initialization. kfd_procfs_add_sysfs_stats is being called twice. This removes one of them. Fixes: 4327bed2ff8e3d ("drm/amdkfd: Add process eviction counters to sysfs") Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Philip Cox <Philip.Cox@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amdgpu: Fix dead lock issue for vblankEmily.Deng1-18/+17
Always start vblank timer, but only calls vblank function when vblank is enabled. This is used to fix the dead lock issue. When drm_crtc_vblank_off want to disable vblank, it first get event_lock, and then call hrtimer_cancel, but hrtimer_cancel want to wait timer handler function finished. Timer handler also want to aquire event_lock in drm_handle_vblank. Signed-off-by: Emily.Deng <Emily.Deng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: fix crash/reboot while accessing sysfs filesShirish S1-5/+5
read/writes to aux_dpcd_* sysfs entries leads to system reboot or hang. Hence fix the handling of input data and reporting of errors appropriately to the user space. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amdkfd: Move process doorbell allocation into kfd deviceMukul Joshi6-50/+64
Move doorbell allocation for a process into kfd device and allocate doorbell space in each PDD during process creation. Currently, KFD manages its own doorbell space but for some devices, amdgpu would allocate the complete doorbell space instead of leaving a chunk of doorbell space for KFD to manage. In a system with mix of such devices, KFD would need to request process doorbell space based on the type of device, either from amdgpu or from its own doorbell space. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amdkfd: Calculate CPU VCRAT size dynamically (v2)Kent Russell1-10/+16
Instead of guessing at a sufficient size for the CPU VCRAT, base the size on the number of online NUMA nodes. v2: fix warning Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amdgpu: Fix handling of KFD initialization failuresFelix Kuehling3-1/+12
Remember KFD module initializaton status in a global variable. Skip KFD device probing when the module was not initialized. Other amdgpu_amdkfd calls are then protected by the adev->kfd.dev check. Also print a clear error message when KFD disables itself. Amdgpu continues its initialization even when KFD failed. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/msm/dpu: remove unused variables new_cnt and old_cnt in dpu_encoder_phys_vid_vblank_irq()Luo Jiaxing1-4/+2
We found two unused variables new_cnt and old_cnt when build kernel with W=1. So delete it. Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-22drm/msm/dpu: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao4-68/+8
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-22drm/msm: Leave inuse count intact on map failureAkhil P Oommen1-1/+3
Leave the inuse count intact on map failure to keep the accounting accurate. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-22drm/msm: Fix premature purging of BOAkhil P Oommen4-24/+28
In the case where we have a back-to-back submission that shares the same BO, this BO will be prematurely moved to inactive_list while retiring the first submit. But it will be still part of the second submit which is being processed by the GPU. Now, if the shrinker happens to be triggered at this point, it will result in a premature purging of this BO. To fix this, we need to refcount BO while doing submit and retire. Then, it should be moved to inactive list when this refcount becomes 0. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-22vga_switcheroo: simplify the return expression of vga_switcheroo_runtime_resumeQinglang Miao1-6/+1
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200921131110.93365-1-miaoqinglang@huawei.com
2020-09-22drm/gma500: clean up indentation issuesColin Ian King1-3/+2
There are a couple of statements that are indented too deeply, remove the extraneous tabs and also an empty line. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200920141407.32672-1-colin.king@canonical.com
2020-09-22drm: rcar-du: Put reference to VSP deviceLaurent Pinchart1-0/+12
The reference to the VSP device acquired with of_find_device_by_node() in rcar_du_vsp_init() is never released. Fix it with a drmm action, which gets run both in the probe error path and in the remove path. Fixes: 6d62ef3ac30b ("drm: rcar-du: Expose the VSP1 compositor through KMS planes") Reported-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-09-22drm: rcar-du: Update description for DRM_RCAR_DW_HDMI Kconfig entryLad Prabhakar1-2/+2
The rcar_dw_hdmi driver is also used on Renesas RZ/G2 SoCs. Update the Kconfig entry description to reflect this. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-09-22drm: rcar-du: Fix crash when enabling a non-visible planeLaurent Pinchart1-1/+1
The DU driver handles non-visible planes (fully clipped by the display's boundaries) by considering them as disabled. It thus disables the plane at the hardware level when the plane is moved off-screen. However, if the plane was previously disabled and is non-visible when it gets enabled, the attempt to disable it crashes, as the plane wasn't previously enabled. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-09-22drm: rcar-du: Fix pitch handling for fully planar YUV formatsLaurent Pinchart2-2/+53
When creating a frame buffer, the driver verifies that the pitches for the chroma planes match the luma plane. This is done incorrectly for fully planar YUV formats, without taking horizontal subsampling into account. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2020-09-22drm: rcar-du: Add r8a77961 supportKuninori Morimoto1-0/+1
This patch adds R-Car M3-W+ (R8A77961) support which is compatible with the R-Car M3-W (R8A77960). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-09-22drm: rcar-du: lvds: Add support for R8A774E1 SoCMarian-Cristian Rotariu1-0/+1
The LVDS encoder on RZ/G2H (R8A774E1) SoC is identical to R-Car Gen3 so just reuse the rcar_lvds_gen3_info structure to hookup R8A774E1 to LVDS encoder driver. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-09-22drm: rcar-du: Add support for R8A774E1 SoCMarian-Cristian Rotariu1-0/+30
Hookup RZ/G2H (R8A774E1) to DU driver. R8A774E1 has one RGB output, one LVDS output and one HDMI output. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-09-22drm/bridge: lvds-codec: Add support for regulatorBiju Das1-0/+29
Add the support for enabling optional regulator that may be used as VCC source. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Replaced 'error' variable with 'ret'] [Renamed regulator from 'vcc' to 'power'] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-09-22drm/vram-helper: Fix use of top-down placementThomas Zimmermann1-1/+1
Commit 7053e0eab473 ("drm/vram-helper: stop using TTM placement flags") cleared the BO placement flags if top-down placement had been selected. Hence, BOs that were supposed to go into VRAM are now placed in a default location in system memory. Trying to scanout the incorrectly pinned BO results in displayed garbage and an error message. [ 146.108127] ------------[ cut here ]------------ [ 146.1V08180] WARNING: CPU: 0 PID: 152 at drivers/gpu/drm/drm_gem_vram_helper.c:284 drm_gem_vram_offset+0x59/0x60 [drm_vram_helper] ... [ 146.108591] ast_cursor_page_flip+0x3e/0x150 [ast] [ 146.108622] ast_cursor_plane_helper_atomic_update+0x8a/0xc0 [ast] [ 146.108654] drm_atomic_helper_commit_planes+0x197/0x4c0 [ 146.108699] drm_atomic_helper_commit_tail_rpm+0x59/0xa0 [ 146.108718] commit_tail+0x103/0x1c0 ... [ 146.109302] ---[ end trace d901a1ba1d949036 ]--- Fix the bug by keeping the placement flags. The top-down placement flag is stored in a separate variable. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Fixes: 7053e0eab473 ("drm/vram-helper: stop using TTM placement flags") Cc: Christian König <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20200921142536.4392-1-tzimmermann@suse.de
2020-09-22drm/i915: check i915_vm_alloc_pt_stash for errorsMatthew Auld1-3/+5
If we are really unlucky and encounter an error during i915_vm_alloc_pt_stash, we end up passing an empty pt/pd stash all the way down into the low-level ppgtt alloc code, leading to explosions, since it expects at least the required number of pt/pd for the va range. [ 211.981418] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 211.981421] #PF: supervisor read access in kernel mode [ 211.981422] #PF: error_code(0x0000) - not-present page [ 211.981424] PGD 80000008439cb067 P4D 80000008439cb067 PUD 84a37f067 PMD 0 [ 211.981427] Oops: 0000 [#1] SMP PTI [ 211.981428] CPU: 1 PID: 1301 Comm: i915_selftest Tainted: G U I 5.9.0-rc5+ #3 [ 211.981430] Hardware name: /NUC6i7KYB, BIOS KYSKLi70.86A.0050.2017.0831.1924 08/31/2017 [ 211.981521] RIP: 0010:__gen8_ppgtt_alloc+0x1ed/0x3c0 [i915] [ 211.981523] Code: c1 48 c7 c7 5d 5d fe c0 65 ff 0d ee 1d 03 3f e8 d9 91 1f e2 8b 55 c4 31 c0 48 8b 75 b8 85 d2 0f 95 c0 48 8b 1c c6 48 89 45 98 <48> 8b 03 48 8b 90 58 02 00 00 48 85 d2 0f 84 07 ea 15 00 48 81 fa [ 211.981526] RSP: 0018:ffffba2cc0eb3970 EFLAGS: 00010202 [ 211.981527] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000004 [ 211.981529] RDX: 0000000000000002 RSI: ffff9be998bdb8c0 RDI: ffff9be99c844300 [ 211.981530] RBP: ffffba2cc0eb39d8 R08: 0000000000000640 R09: ffff9be97cdfd000 [ 211.981531] R10: ffff9be97cdfd614 R11: 0000000000000000 R12: 0000000000000000 [ 211.981532] R13: ffff9be98607ba20 R14: ffff9be995a0b400 R15: ffffba2cc0eb39e8 [ 211.981534] FS: 00007f0f10b31000(0000) GS:ffff9be99fc40000(0000) knlGS:0000000000000000 [ 211.981536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 211.981538] CR2: 0000000000000000 CR3: 000000084d74e006 CR4: 00000000003706e0 [ 211.981539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 211.981541] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 211.981542] Call Trace: [ 211.981609] gen8_ppgtt_alloc+0x79/0x90 [i915] [ 211.981678] ppgtt_bind_vma+0x36/0x80 [i915] [ 211.981756] __vma_bind+0x39/0x40 [i915] [ 211.981818] fence_work+0x21/0x98 [i915] [ 211.981879] fence_notify+0x8d/0x128 [i915] [ 211.981939] __i915_sw_fence_complete+0x62/0x240 [i915] [ 211.982018] i915_vma_pin_ww+0x1ee/0x9c0 [i915] Fixes: cd0452aa2a0d ("drm/i915: Preallocate stashes for vma page-directories") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200921160844.73186-1-matthew.auld@intel.com
2020-09-22drm/exynos: Fix dma_parms allocationMarek Szyprowski1-26/+1
Since commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices") driver core handles allocation of the dma_parms structure for platform device, so there is no need to manually allocate nor free it. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-09-21drm/panel: samsung: make vint_table static constJason Yan1-1/+1
This eliminates the following sparse warning: drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c:217:15: warning: symbol 'vint_table' was not declared. Should it be static? While at it, make the table const as it is never modified. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916132301.2914017-1-yanaijie@huawei.com
2020-09-21drm/imx/dcss: fix unused but set variable warningsWang ShaoBo1-2/+0
Fix unused but set variable warning building with `make W=1`: drivers/gpu/drm/imx/dcss/dcss-plane.c:270:6: warning: variable ‘pixel_format’ set but not used [-Wunused-but-set-variable] u32 pixel_format; ^~~~~~~~~~~~ Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200911014414.4663-1-bobo.shaobowang@huawei.com
2020-09-21drm/vc4: hvs: Pull the state of all the CRTCs prior to PV muxingMaxime Ripard1-0/+17
The vc4 display engine has a first controller called the HVS that will perform the composition of the planes. That HVS has 3 FIFOs and can therefore compose planes for up to three outputs. The timings part is generated through a component called the Pixel Valve, and the BCM2711 has 6 of them. Thus, the HVS has some bits to control which FIFO gets output to which Pixel Valve. The current code supports that muxing by looking at all the CRTCs in a new DRM atomic state in atomic_check, and given the set of constraints that we have, assigns FIFOs to CRTCs or reject the mode entirely. The actual muxing will occur during atomic_commit. However, that doesn't work if only a fraction of the CRTCs' state is updated in that state, since it will ignore the CRTCs that are kept running unmodified, and will thus unassign its associated FIFO, and later disable it. In order to make the code work as expected, let's pull the CRTC state of all the enabled CRTC in our atomic_check so that we can operate on all the running CRTCs, no matter whether they are affected by the new state or not. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917121623.42023-1-maxime@cerno.tech
2020-09-21drm/ttm: update kernel-doc line commentsTian Tao1-1/+1
Update kernel-doc line comments to fix warnings reported by make W=1. drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'glob' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'from_wq' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'extra' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'ctx' not described in 'ttm_shrink' Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/391317/ Signed-off-by: Christian König <christian.koenig@amd.com>
2020-09-21drm/panfrost: add Amlogic GPU integration quirksNeil Armstrong1-0/+11
This adds the required GPU quirks, including the quirk in the PWR registers at the GPU reset time and the IOMMU quirk for shareability issues observed on G52 in Amlogic G12B SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-4-narmstrong@baylibre.com
2020-09-21drm/panfrost: add amlogic reset quirk callbackNeil Armstrong3-0/+17
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM, G12A/SM1 & G12B SoCs needs a quirk in the PWR registers at the GPU reset time. Since the Amlogic's integration of the GPU cores with the SoC is not publicly documented we do not know what does these values, but they permit having a fully functional GPU running with Panfrost. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [Steven: Fix typo in commit log] Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-3-narmstrong@baylibre.com
2020-09-21drm/panfrost: add support for vendor quirkNeil Armstrong2-0/+7
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM, G12A/SM1 & G12B SoCs needs a quirk in the PWR registers after each reset. This adds a callback in the device compatible struct of permit this. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [Steven: Fix typo in commit log] Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-2-narmstrong@baylibre.com
2020-09-21drm/i915: Fix uninitialised variable in intel_context_create_request.Maarten Lankhorst1-0/+1
In case backoff fails with an error, we return an undefined rq, assign err to rq correctly. Fixes: 8a929c9eb1c2 ("drm/i915: Use ww pinning for intel_context_create_request()") Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200918111208.1392128-1-maarten.lankhorst@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-09-21drm/dev: Remove drm_dev_initDaniel Vetter3-51/+4
We can now also delete drm_dev_init, now that vkms, vgem and i915 selftests are resolved. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-5-daniel.vetter@ffwll.ch
2020-09-21drm/amdgpu: Convert to using devm_drm_dev_alloc() (v2)Luben Tuikov1-12/+4
Convert to using devm_drm_dev_alloc(), as drm_dev_init() is going away. v2: Remove drm_dev_put() since a) devres doesn't do refcounting, see Documentation/driver-api/driver-model/devres.rst, Section 4, paragraph 1; and since b) devres acts as garbage collector when the DRM device's parent's devres "action" callback is called to free the container device (amdgpu_device), which embeds the DRM dev. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-4-daniel.vetter@ffwll.ch
2020-09-21drm/i915/selftests: align more to real device lifetimesDaniel Vetter1-20/+19
To avoid having to create all the device and driver scaffolding we just manually create and destroy a devres_group. v2: Rebased v3: use devres_open/release_group so we can use devm without real hacks in the driver core or having to create an entire fake bus for testing drivers. Might want to extract this into helpers eventually, maybe as a mock_drm_dev_alloc or test_drm_dev_alloc. v4: - Fix IS_ERR handling (Matt) - Delete surplus put_device() in mock_device_release (intel-gfx-ci) v5: - do not switch to device_add - it breaks runtime pm in the tests and with the devres_group_add/release no longer needed for automatic cleanup (CI). Update commit message to match. - print correct error in pr_err (Matt) v6: Remove now unused err variable (CI). v7: More warning fixes ... Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v3) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (v4) Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200919134032.2488403-1-daniel.vetter@ffwll.ch
2020-09-21drm/i915/selftest: Create mock_destroy_deviceDaniel Vetter13-12/+19
Just some prep work before we rework the lifetime handling, which requires replacing all the drm_dev_put in selftests by something else. v2: Don't go with a static inline, upsets the header tests and separation. Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-2-daniel.vetter@ffwll.ch
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.